Commit graph

19 commits

Author SHA1 Message Date
Masahiro Yamada
52159d27ff ARM: dts: uniphier: sync DT with latest Linux
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-18 14:06:46 +09:00
Masahiro Yamada
0298f4c003 ARM: uniphier: move CONFIG_SPL_* to defconfig or select
As I repeated in the ML, I am unhappy with config entries with bare
defaults.  Kick them out of arch/arm/mach-uniphier/Kconfig.

Currently, CONFIG_SPL_SERIAL_SUPPORT is not user-configurable
(build fails without it), but it should be fixed later anyway,
so I am moving CONFIG_SPL_SERIAL_SUPPORT to defconfigs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-23 00:38:38 +09:00
Masahiro Yamada
9b1b6d4225 Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL"
This reverts commit 90c08d9e08.

I took a closer look at this after the commit was applied, and found
CONFIG_SYS_MALLOC_F_LEN=0x2000 was too much.  8KB memory for SPL is
actually too big for some boards.  Perhaps 0x800 is enough, but the
situation varies board by board.

Let's postpone our decision until we come up with a better idea.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-19 15:20:09 -04:00
Tom Rini
9a6535e05f Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2016-09-18 14:05:30 -04:00
Masahiro Yamada
27350c922e ARM: uniphier: select PINCTRL and SPL_PINCTRL
Now all UniPhier SoCs support a pinctrl driver.  Select (SPL_)PINCTRL
since it is mandatory even for base use.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-18 23:10:35 +09:00
Simon Glass
7ace858bf1 Convert CONFIG_SPL_NOR_SUPPORT to Kconfig
Move this option to Kconfig and tidy up existing uses.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:27:16 -04:00
Masahiro Yamada
90c08d9e08 Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL
If both SPL_DM and SPL_OF_CONTROL are enabled, SPL needs to bind
several devices, but CONFIG_SYS_MALLOC_F_LEN=0x400 is apparently
not enough.  Increase the default to 0x2000 for the case.  This
will be helpful for shorter defconfigs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-07 08:48:58 -04:00
Masahiro Yamada
8d11f80413 ARM: uniphier: enable CONFIG_CMD_CACHE
This will be useful, for example, to load firmware to DRAM and make
it visible to other agents.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-28 13:12:18 +09:00
Masahiro Yamada
85dc2fe119 ARM: uniphier: change UNIPHIER_SERIAL to default y option
This is very likely to be necessary for normal use cases.
Set its default to 'y' for shorter defconfig files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-28 13:11:35 +09:00
Masahiro Yamada
4fd92db8db ARM: uniphier: move CONFIG_I2C_EEPROM to defconfig
We already have the entry for this option in Kconfig, so let's
migrate to it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-26 17:35:46 -04:00
Masahiro Yamada
7c8ef0feb9 ARM: uniphier: use the default CONFIG_BOOTDELAY=2
I do not insist on CONFIG_BOOTDELAY=3. The default value in Kconfig,
CONFIG_BOOTDELAY=2, is just fine for these boards.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-20 07:15:39 +09:00
Heiko Schocher
bb597c0eeb common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.

Signed-off-by: Heiko Schocher <hs@denx.de>

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2016-06-09 13:53:05 -04:00
Tom Rini
89cb2b5f8b configs: Re-sync with cmd/Kconfig
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:47 -04:00
Simon Glass
4edb9458b2 Correct defconfig ordering
Various boards have the wrong Kconfig ordering now. To avoid a misleading

diff in the next patch, reorder the configuration correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 14:21:27 -04:00
Masahiro Yamada
5fb87a1632 ARM: uniphier: rework UniPhier SoC select in Kconfig
The chains of "depends on <SoC_name>" in the current Kconfig is
clumsy.  The idea here is to allow users to choose a SoC group first
(SoC group consists of some SoCs that can coexist in one binary).
Then, allow to enable/disable each SoC support in the selected SoC
group.  This makes the Kconfig menu clearer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
fe7c95ee5c ARM: uniphier: merge two defconfig files
PH1-Pro5 support and ProXstream2/PH1-LD6b support can coexist in one
image and there is bit more room in SPL to accommodate all of them.
Merge uniphier_pro5_defconfig into uniphier_pxs2_defconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
4aceb3f8d4 ARM: uniphier: enable UniPhier SD/MMC host driver
Enable the driver in all UniPhier defconfig files and add some
needed defines to the common files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:15 +09:00
Masahiro Yamada
b800cbde4f ARM: uniphier: enable GPIO command and driver for UniPhier SoCs
This allows to use the "gpio" command.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-29 03:50:15 +09:00
Masahiro Yamada
1a2645341a ARM: uniphier: support ProXstream2, PH1-LD6b boards in single defconfig
These boards are similar enough to be supported in a single defconfig
file.  Distinguish one from another by "DEVICE_TREE" from the command
line.  The how-to-build in doc/README.uniphier should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:57 +09:00
Renamed from configs/ph1_ld6b_defconfig (Browse further)