Commit graph

123 commits

Author SHA1 Message Date
Tim Harvey
6a165904ac imx: ventana: add iomux for PCISKT_WDIS# gpio
The PCISKT_WDIS# gpio allows for asserting WDIS# going to the various PCIe
sockets on the Ventana board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:03:09 +02:00
Tim Harvey
d9d4149296 imx: ventana: enable SION bit on gpio outputs
Enable the SION bit on gpio outputs that we wish to be able to read the
value of.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:02:28 +02:00
Tim Harvey
2cb6e529d3 imx: ventana: configure i2c_dis# pin properly for gw53xx
The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was
added to the GW53xx on revB PCB's). Additionally, remove the duplicate
config for GW54xx.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:01:29 +02:00
Tim Harvey
49281f4d6d imx: ventana: add missing crlf to print
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:59:50 +02:00
Tim Harvey
b40833d8ee imx: ventana: add video enable gpio pinmux for GW54xx
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:58:50 +02:00
Tim Harvey
e5131d53bf imx: ventana: add appropriate delay following GSC i2c write
The Gateworks System Controller EEPROM config is flash based. Add a delay
following writes to avoid errors on back-to-back writes.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:53:50 +02:00
Tim Harvey
2325bb1898 imx: ventana: remove caam disable per eeprom bit
During manufacturing this bit is not getting enabled when it should be, so
we will ignore it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:52:58 +02:00
Tim Harvey
63b85adcec imx: ventana: set dynamic env var for flash layout
NAND devices have differing layouts with respect to page size and pages per
block. These parameters affect the parameters that need to be passed to
mkfs.ubifs and ubinize used to create UBI images. The various NAND chips
supported by Gateworks Ventana fall into two different layouts which we
refer to as 'normal' and 'large'. This layout is useful when referencing
ubi files to download and flash so we create a dynamic env variable for it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:51:35 +02:00
Stefano Babic
e82abaeb7f Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	boards.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>
2014-08-11 10:21:03 +02:00
Fabio Estevam
676ac24e07 pmic: pmic_pfuze100: Use a shorter name for PMIC name
It is redundant to use 'PFUZE100_PMIC' as the PMIC name because we already
know it is a PMIC.

Call it simply 'PFUZE100' instead.

Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-08-08 10:29:41 +02:00
Masahiro Yamada
93d4334f7f Add board MAINTAINERS files
We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.

The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.

After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.

TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Suggested-by: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:06 -04:00
Masahiro Yamada
dd84058d24 kconfig: add board Kconfig and defconfig files
This commit adds:
 - arch/${ARCH}/Kconfig
    provide a menu to select target boards
 - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
 - configs/${TARGET_BOARD}_defconfig
    default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:01 -04:00
Fabio Estevam
0a11d6f29c mx6: Remove duplication of iomuxc structure
There is no need to keep iomuxc_base_regs structure as it serves the exact same
purpose of the iomuxc structure, which is to provide access to the GPR
registers.

The additional fields of iomuxc_base_regs are not used. Other advantage of
'iomuxc' is that it has a shorter name and the variable declarations can fit
into a single line.

So remove iomuxc_base_regs structure and use iomuxc instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-07-23 12:25:41 +02:00
Tim Harvey
0cc11dea89 imx: ventana: switch to SPL
Switch to an SPL image. The SPL for Ventana does the following:
 - setup i2c and read the factory programmed EEPROM to obtain DRAM config
   and model for board-specific calibration data
 - configure DRAM per CPU/size/layout/devices/calibration
 - load u-boot.img from NAND and jump to it

This allows for a single SPL+u-boot.img to replace the previous multiple boa
configurations.

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06 10:07:26 +02:00
Tim Harvey
680e8db450 imx: ventana: auto-configure for IMX6Q vs IMX6DL
use the new iomux function and a macros to create a multi-dimensional array
of iomux values without duplicating the defintions.

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06 10:07:26 +02:00
Tim Harvey
1badf2f47c imx: ventana: split read_eeprom into standalone file
Split the read_eeprom function out so that it can be shared (ie with SPL)

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06 10:07:26 +02:00
Tim Harvey
7a278f9f1b imx: ventana: add HDMI and LVDS display capability
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 15:10:54 +02:00
Tim Harvey
483a435d93 imx6: ventana: fix system-serial dt property
Fix typo in setting of system-serial property causing the prop len to be
off by 1.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 15:10:54 +02:00
Tim Harvey
234d89dac6 ventana: Add support for the LTC3676 PMIC
The LTC3676 PMIC is used instead of the PFUZE100 PMIC on the
GW51xx/GW52xx/GW53xx Ventana baseboards. In order to support the IMX6Q SoC
at 1GHz on those baseboards, we need to adjust the voltage scaling for the SW1
and SW3 DC/DC converters on the LTC3676 for 1225mV. Note that the scalar
values for the LTC3676 are board-specific as they relate to a resistor devider
chosen by the board design.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 15:10:43 +02:00
Tim Harvey
17449272a0 ventana: use non-generic pfuze100 init
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 14:38:23 +02:00
Tim Harvey
444e4925a4 ventana: remove redundant include
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-04-28 10:45:55 +02:00
Tim Harvey
a594a6f121 ventana: fixed comments in eeprom header
Fix several invalid comments regarding the EEPROM structure used by Gateworks
Ventana boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-04-28 10:45:55 +02:00
Tim Harvey
59189a8b26 ventana: Add Gateworks Ventana family support
Gateworks Ventana is a product family based on the i.MX6.  This
patch adds support for all boards in the Ventana family. Where
possible, data from the boards EEPROM is used to determine various
details about the board at runtime.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-03-12 10:23:03 +01:00