Commit graph

498 commits

Author SHA1 Message Date
Stefan Roese
9caeaadf50 Merge commit 'u-boot/master' into for-1.3.1
Conflicts:

	drivers/rtc/Makefile
2007-12-11 11:34:54 +01:00
Jon Loeliger
f743931f9b Merge commit 'wd/master' 2007-12-06 11:27:32 -06:00
Nobuhiro Iwamatsu
521dcd30b9 Merge git://www.denx.de/git/u-boot
Conflicts:

	drivers/Makefile
2007-12-07 01:20:16 +09:00
Nobuhiro Iwamatsu
aa9c4f1d22 sh: Add ms7750se support in MAKEALL
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-11-29 01:17:58 +09:00
Jean-Christophe PLAGNIOL-VILLARD
c714437342 sh: Add sh3 and sh4 support in MAKEALL
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-11-29 01:17:53 +09:00
Jean-Christophe PLAGNIOL-VILLARD
3deca9d447 MAKEALL: add missing 512x boards in ppc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-26 18:59:44 +01:00
Jon Loeliger
890e9413c0 Merge commit 'remotes/wd/master' 2007-11-20 14:34:57 -06:00
Shinya Kuribayashi
b09258c539 MAKEALL: Added missing pb1000 board
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2007-11-17 18:54:16 +09:00
Peter Pearse
5ca9881aad Add apollon board support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-11-09 15:24:26 +00:00
Stefan Roese
3d6cb3b24a ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
Again, only one image supports both targets.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-11-03 12:08:28 +01:00
Jon Loeliger
3cac27c1d4 Merge commit 'remotes/wd/master' 2007-11-02 15:22:01 -05:00
Stefan Roese
353f2688b4 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
The Haleakala is nearly identical with the Kilauea eval board. The only
difference is that the 405EXr only supports one EMAC and one PCIe
interface. This patch adds support for the Haleakala board by using
the identical image for Kilauea and Haleakala. The distinction is done
by comparing the PVR.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:20:51 +01:00
Stefan Roese
211ea91ac6 ppc4xx: Add initial AMCC Makalu 405EX support
Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:20:50 +01:00
Stefan Roese
566806ca1a ppc4xx: Add initial AMCC Kilauea 405EX support
Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:20:49 +01:00
Tony Li
281df457c1 mpc83xx: Add configure entry for MPC83xx ATM support
Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
Makfile and MAKEALL

Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-10-18 10:33:53 -05:00
Jon Loeliger
3c89d75409 Initial mpc8610hpcd Makefile files.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-10-17 15:01:54 -05:00
Wolfgang Denk
ff7640c9ea Fix typo in MAKEALL script.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-07 17:43:36 +02:00
Wolfgang Denk
909627dca4 Merge with /home/wd/git/u-boot/custodian/u-boot-coldfire 2007-08-18 21:56:57 +02:00
Wolfgang Denk
1d55483cf7 Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xx 2007-08-18 21:47:33 +02:00
TsiChungLiew
4a442d3186 ColdFire: Add M5235EVB Platform for MCF523x
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-17 11:36:29 -06:00
TsiChungLiew
8ae158cd87 ColdFire: Add M54455EVB for MCF5445x
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16 17:43:23 -06:00
TsiChungLiew
a1436a8426 ColdFire: Add M5253EVBE platform for MCF52x2
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16 17:43:21 -06:00
John Rigby
81735b2568 Merge branch 'denx-coldfire' into coldfire-aug2007 2007-08-16 17:40:03 -06:00
Stefan Roese
fc9970137c Merge with git://www.denx.de/git/u-boot.git 2007-08-16 19:50:53 +02:00
Andy Fleming
ec72382295 Add support for building all boards with a TSEC
Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
Now we can do a MAKEALL test on all of them!

Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16 12:12:43 +02:00
Stefan Roese
6da0c5bd4a Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-16 09:54:51 +02:00
Kim Phillips
19fa1c3536 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
and reorder the existing 83xx maintainers alpha.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-15 22:36:33 -05:00
Stefan Roese
d61ea14885 Merge with git://www.denx.de/git/u-boot.git 2007-08-15 14:51:27 +02:00
Stefan Roese
3b3bff4cbf Merge with git://www.denx.de/git/u-boot.git 2007-08-14 16:36:29 +02:00
Stefan Roese
34886bbea2 Merge with /home/stefan/git/u-boot/zeus 2007-08-14 15:00:42 +02:00
Stefan Roese
779e975117 ppc4xx: Add initial Zeus (PPC405EP) board support
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-14 14:44:41 +02:00
Jon Loeliger
8e2dd87eee Merge commit 'remotes/wd/master'
Conflicts:

	MAKEALL

With any luck, this is the last MAKEALL merge conflict!
2007-08-13 11:01:52 -05:00
Kim Phillips
fb56579ffe make MAKEALL more immune to merge conflicts
..by placing board entries one per line, as suggested by jdl.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-10 23:34:42 +02:00
Joe Hamman
c646bba646 Add support for SBC8641D. Config files.
Add support for Wind River's SBC8641D reference board.

Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Jon Loeliger <jdl@freescale.com>
2007-08-10 14:50:05 -05:00
Sergey Kubushyn
c74b2108e3 [ARM] TI DaVinci support, hopefully final
Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-08-10 20:26:18 +02:00
Stefan Roese
35d22f957a Coding style cleanup
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-10 10:42:25 +02:00
Niklaus Giger
641cca9569 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
This series of patches adds support for 2 boards from Netstal Maschinen.

The HCU4 has a PPC405Gpr and
the HCU5 has a PPC440EPX.

The HCU4 has a somehow complicated flash setup, as the booteprom is
only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
elegant solution.

The HCU5 has only a booteprom as the whole code will be downloaded from a
different board which has HD, CD-ROM, etc and where all code is stored.

This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
Thanks them a lot.

Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2007-08-10 09:08:42 +02:00
Wolfgang Denk
b23b547597 Merge with /home/tur/git/u-boot#cm5200-si 2007-08-07 17:04:30 +02:00
Wolfgang Denk
f2c2a937d8 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-08-06 01:11:08 +02:00
Bartlomiej Sieka
86b116b1b1 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
Add the ability for modules from the Schindler cm5200 family to use a
single U-Boot image:
- rename cm1_qp1 to cm5200
- add run-time module detection
- parametrize SDRAM configuration according to the module we are running on

Few minor, board-specific fixes included in this patch:
- better MAC address handling
- updated default environment ('update' command uses +{filesize} now)
- improved error messages in the auto-update code
- allow booting U-Boot from RAM (CFG_RAMBOOT)

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-08-03 12:08:16 +02:00
Wolfgang Denk
cdd917a43d Fix build errors and warnings / code cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-02 00:48:45 +02:00
Rafal Jaworowski
8993e54b6f [ADS5121] Support for the ADS5121 board
The following MPC5121e subsystems are supported:

- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
2007-07-27 14:43:59 +02:00
John Otken
d4024bb72d ppc4xx: Add support for AMCC 405EP Taihu board
Signed-off-by: John Otken <john@softadvances.com>
2007-07-26 17:49:11 +02:00
Stefan Roese
c883f6ea32 Coding style cleanup
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-16 13:11:12 +02:00
Stefan Roese
c7e8410e3c Merge with /home/stefan/git/u-boot/u-boot-coldfire-freescale 2007-07-16 11:51:41 +02:00
Bartlomiej Sieka
fa1df30892 CM1.QP1: Support for the Schindler CM1.QP1 board.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-07-11 20:11:07 +02:00
John Rigby
98c80b462f Merge branch 'master' into u-boot-5329-early 2007-07-10 14:58:41 -06:00
TsiChungLiew
be296e31c4 Revert file mode
Changed MAKEALL file mode to executable, removed executable file mode from Makefile

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10 14:29:08 -06:00
Jon Loeliger
46175d9764 Add MPC8568MDS to MAKEALL 85xx target.
It was missing from the original port submission.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-05 03:41:34 +02:00
Wolfgang Denk
98c440bee6 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-07-03 15:07:56 +02:00
TsiChung Liew
8e585f02f8 Added M5329AFEE and M5329BFEE Platforms
Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
drivers/serial,  immap_5329.h, m5329.h, mcfrtc.h,
include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
rtc/mcfrtc.c

Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
lib_m68k/time.c, net/eth.c and rtc/Makefile

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2007-06-18 15:17:56 -06:00
Stefan Roese
b765ffb773 [ppc4xx] Add initial lwmon5 board support
This patch adds initial support for the Liebherr lwmon5 board euqipped
with an AMCC 440EPx PowerPC.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-15 08:18:01 +02:00
Wolfgang Denk
d1246a4bb1 Merge with /home/wd/git/u-boot/custodian/u-boot-arm 2007-06-06 16:18:01 +02:00
Stefan Roese
c440bfe6d6 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
This patch adds NAND booting support for the AMCC Acadia eval board.

Please make sure to configure jumper J7 to position 2-3 when booting
from NOR, and to position 1-2 when booting for NAND.

I also added a board command to configure the I2C bootstrap EEPROM
values. Right now only 267MHz is support for booting either via NOR
or NAND FLASH. Here the usage:

=> bootstrap 267 nor	;to configure the board for 267MHz NOR booting
=> bootstrap 267 nand	;to configure the board for 267MHz NNAND booting

Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-06 11:42:13 +02:00
Stefan Roese
f3679aa13d Merge with /home/stefan/git/u-boot/bamboo-nand 2007-06-01 16:15:34 +02:00
Stefan Roese
cf959c7d66 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
This patch adds NAND booting support for the AMCC Bamboo eval board.
Since the NAND-SPL boot image is limited to 4kbytes, this version
only supports the onboard 64MBytes of DDR. The DIMM modules can't be
supported, since the setup code for I2C DIMM autodetection and
configuration is too big for this NAND bootloader.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-01 15:27:11 +02:00
Jon Loeliger
822d55365b Add LIST_86xx MAKEALL target for PowerPC builds.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-05-23 21:54:08 +02:00
Peter Pearse
fdda367561 Merge with git://www.denx.de/git/u-boot.git 2007-05-18 14:33:23 +01:00
Wolfgang Denk
256176d3d5 Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xx 2007-05-16 01:12:04 +02:00
Peter Pearse
b0d8f5bf0d New board SMN42 branch 2007-05-09 11:37:56 +01:00
Wolfgang Denk
885ec89b64 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-05 18:05:02 +02:00
Kim Phillips
068aab660b mpc83xx: fix trivial error in MAKEALL
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-05-03 19:43:52 -05:00
Kim Phillips
5c5d324293 mpc83xx: minor fixups for 8313rdb introduction 2007-04-25 12:34:38 -05:00
Andy Fleming
81f481ca70 Enable 8544 support
* Add support to the Makefile
* Add 8544 configuration support to the tsec driver
* Add 8544 SVR numbers to processor.h

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-04-23 19:58:28 -05:00
Wolfgang Denk
43f6226db0 Merge with /home/wd/git/u-boot/custodian/u-boot-74xx-7xx 2007-04-18 17:00:09 +02:00
Wolfgang Denk
c8f2280162 Merge with /home/wd/git/u-boot/custodian/u-boot-microblaze 2007-04-04 02:05:48 +02:00
Michal Simek
1798049522 Support for XUPV2P board
Reset support
BSP autoconfig support
2007-03-26 01:39:07 +02:00
Wolfgang Denk
44ba464b99 Code cleanup / re-insert previous Copyright entries.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-03-22 00:13:12 +01:00
Wolfgang Denk
a17824c749 Merge with /home/wd/git/u-boot/custodian/u-boot-blackfin 2007-03-22 00:00:03 +01:00
Stefan Roese
fc1e45ce6e Merge with /home/stefan/git/u-boot/acadia 2007-03-21 14:38:25 +01:00
Stefan Roese
16c0cc1c82 [PATCH] Add AMCC Acadia (405EZ) eval board support
This patch adds support for the new AMCC Acadia eval board.

Please note that this Acadia/405EZ support is still in a beta stage.
Still lot's of cleanup needed but we need a preliminary release now.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-21 13:39:57 +01:00
Aubrey Li
654589873d [Blackfin][PATCH] Add BF561 EZKIT board support 2007-03-20 18:16:24 +08:00
Aubrey Li
26bf7deca3 [Blackfin][PATCH] Add BF537 stamp board support 2007-03-19 01:24:52 +08:00
Michal Simek
cfc67116a7 [Microblaze][PATCH] part 2
timer support
interrupt controller support
flash support
ethernet support
cache support
board information support
env support
booting image support

adding support for Xilinx ML401
2007-03-11 13:48:24 +01:00
Aubrey.Li
ef26a08fef [Blackfin][PATCH-2/2] Common files changed to support bf533 platform 2007-03-09 13:40:56 +08:00
Wolfgang Denk
eb92f61355 Minor cleanup. 2007-03-08 22:52:51 +01:00
Timur Tabi
7a78f148d6 mpc83xx: Add support for the MPC8349E-mITX-GP
Add support for the MPC8349E-mITX-GP, a stripped-down version of the
MPC8349E-mITX.  Bonus features include support for low-boot (BMS bit in
HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.

Signed-off-by: Timur Tabi <timur@freescale.com>
2007-03-02 11:05:54 -06:00
Kim Phillips
ae246dc6c1 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL 2007-03-02 11:05:53 -06:00
roy zang
00b574bdc8 Merge branch 'master' into hpc2
Conflicts:

	drivers/Makefile
Fix the merge conflict in file drivers/Makefile
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2007-02-28 16:46:48 +08:00
Stefan Roese
90b0cf47eb Merge with /home/stefan/git/u-boot/denx-merge-sr 2007-02-20 10:58:04 +01:00
Stefan Roese
4745acaa1a [PATCH] Add support for the AMCC Katmai (440SPe) eval board
Signed-off-by: Stefan Roese <sr@denx.de>
2007-02-20 10:57:08 +01:00
Wolfgang Denk
bc2b9c3383 Merge with /home/tur/git/u-boot#motionpro 2007-02-16 23:44:55 +01:00
roy zang
30bddf2c46 Merge branch 'master' into hpc2 2007-02-12 11:24:27 +08:00
Bartlomiej Sieka
53d4a4983f [Motion-PRO] Preliminary support for the Motion-PRO board. 2007-02-09 10:45:42 +01:00
Stefan Roese
8b7d1f0ab7 [PATCH] Add support for esd mecp5200 board
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2007-01-31 16:37:34 +01:00
roy zang
c1c52e38d3 Merge branch 'master' into hpc2 2007-01-30 16:43:18 +08:00
Gary Jennejohn
6bd2447ee4 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists 2007-01-24 12:16:56 +01:00
roy zang
ee460917af Merge branch 'master' into hpc2
Conflicts:

	drivers/cfi_flash.c

The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
mpc7448hpc2 board.
2007-01-22 13:15:35 +08:00
Stefan Roese
9d8d5a5bfb [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 16:05:47 +01:00
Stefan Roese
3a83ee3021 Merge with /home/stefan/git/u-boot/denx-merge-sr 2007-01-18 10:27:26 +01:00
Stefan Roese
5fb692cae5 [PATCH] Add support for AMCC Taishan PPC440GX eval board
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 10:25:34 +01:00
Wolfgang Denk
6d3e010723 Raname solidcard3 into sc3; add redundant env for sc3 2007-01-16 18:30:50 +01:00
roy zang
a41969e09b Merge branch 'master' into hpc2 2007-01-04 11:10:05 +08:00
Wolfgang Denk
82e5236a8b Minor code cleanup; update CHANGELOG. 2006-12-22 10:30:26 +01:00
Bartlomiej Sieka
daa6e418bc Preliminary support for the iDMR board (ColdFire). 2006-12-20 00:27:32 +01:00
roy zang
e0b369e4f7 Fix the confilcts when merging 'master' into hpc2.
The conflicts due to a new mpc7448 p3m7448 board is in the main tree.

Merge branch 'master' into hpc2

Conflicts:

	MAKEALL
	cpu/74xx_7xx/cpu.c
	cpu/74xx_7xx/cpu_init.c
	cpu/74xx_7xx/speed.c
2006-12-01 12:09:33 +08:00
Wolfgang Denk
ab07b6c221 Merge with http://opensource.freescale.com/pub/scm/u-boot-83xx.git 2006-11-30 02:01:32 +01:00
Stefan Roese
1eac2a7141 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
quite similar and share the same board directory "prodrive/p3mx"
and the same config file "p3mx.h".

Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-29 16:14:05 +01:00
Kim Phillips
32081125a0 Merge http://www.denx.de/git/u-boot 2006-11-28 23:35:49 -06:00
roy zang
6bd87c0aee Solve the copyright conflicts when merging 'master' into hpc2.
Merge branch 'master' into hpc2

Conflicts:

	drivers/cfi_flash.c
2006-11-29 09:45:03 +08:00
Stefan Roese
48c7d6dba9 Merge with /home/stefan/git/u-boot/denx 2006-11-27 14:11:22 +01:00
Stefan Roese
dfc8a9ee00 Merge with /home/stefan/git/u-boot/denx 2006-11-10 07:48:47 +01:00
Dave Liu
5f8204394e mpc83xx: Add MPC8360EMDS basic board support
Add support for the Freescale MPC8360EMDS board.
Includes DDR, DUART, Local Bus, PCI.
2006-11-03 19:42:21 -06:00
Timur Tabi
2ad6b513b3 mpc83xx: Add support for the MPC8349E-mITX
PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006090742000024 "Add support for multiple I2C buses"
  2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
  3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
  4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
  5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"

CHANGELOG:

* Add support for the Freescale MPC8349E-mITX reference design platform.
  The second TSEC (Vitesse 7385 switch) is not supported at this time.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03 19:42:20 -06:00
roy zang
4c52783b3d General code modification for mpc7448hpc2 board support.
1. Add 7447A and 7448 processor support.
2. Add the following flags.

CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
(such as by switch on board), this flag should be set.

CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
relocates to RAM, this flag should be set.

CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
system hang in exception, this flag should be set.

There is a design issue for tsi108/109 pci configure  read. When pci scan
the slots, if there is no pci card, the tsi108/9 will cause a machine
check exception for mpc7448 processor.

Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-11-02 18:49:51 +08:00
Wolfgang Denk
6ccec4492e Add ATSTK1000 and ATSTK1002 board support
Patch by Haavard Skinnemoen, 06 Sep 2006

This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
daughterboard.

ATSTK1000 is a full-featured development board for AT32AP CPUs. It
has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
CompactFlash cards. For more information, please see this page:

http://www.atmel.com/dyn/products/tools.asp?family_id=682

The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
AT32AP7000 chip.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 14:42:37 +02:00
Wolfgang Denk
82165a334b Merge with /home/tur/proj/051_uboot_linux_v38b/u-boot 2006-10-18 22:27:57 +02:00
Bartlomiej Sieka
4707fb50cc Preliminary patch adding support for the MarelV38B board. 2006-10-13 21:09:09 +02:00
Wolfgang Denk
8d4ac79436 Add support for EP82xxM boards
Patch by Aaron Sells, 20 Jun 2006
2006-10-09 00:35:30 +02:00
Stefan Roese
64cd52efd1 Merge with /home/stefan/git/u-boot/denx 2006-09-18 10:48:03 +02:00
Wolfgang Denk
98e43917dc Merge with /home/m8/git/u-boot 2006-09-09 22:53:06 +02:00
Stefan Roese
2d658967e1 Fix build problem cpu/ppc4xx/ndfc.c
Patch by Stefan Roese, 07 Sep 2006
2006-09-07 13:09:53 +02:00
Marian Balakowicz
4f0645eb79 Fix LOG_DIR directory creation error.
Add support for automatic creation of BUILD_DIR directory.
2006-09-07 12:05:53 +02:00
Stefan Roese
887e2ec9ec Add support for AMCC Sequoia PPC440EPx eval board
- Add support for PPC440EPx & PPC440GRx
- Add support for PPC440EP(x)/GR(x) NAND controller
  in cpu/ppc4xx directory
- Add NAND boot functionality for Sequoia board,
  please see doc/README.nand-boot-ppc440 for details
- This Sequoia NAND image doesn't support environment
  in NAND for now. This will be added in a short while.
Patch by Stefan Roese, 07 Sep 2006
2006-09-07 11:51:23 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Wolfgang Denk
5196a7a03b Minor cleanup 2006-08-18 23:27:33 +02:00
Marian Balakowicz
6d3bc9b8cf Add support for WTK FO300 board (TQM5200 based). 2006-08-18 19:14:46 +02:00
Wolfgang Denk
144f7795ee Disabled kvme080 board in MAKEALL because of build problems. 2006-07-21 15:21:40 +02:00
Wolfgang Denk
32cb2c70c4 Add support for friendly-arm SBC-2410X board
Patch by JinHua Luo, 01 Sep 2005
2006-07-21 11:31:42 +02:00
Wolfgang Denk
53dd6ce4f0 Add support for KVME080 board
Patch by Sangmoon Kim, 18 Aug 2005
2006-07-21 11:29:20 +02:00
Wolfgang Denk
5078cce81c * Cleanup TQM5200 board configurations:
- make highboot configurations use environment at high end, too,
    to avoid flash fragmentation
  - always use redundand environment
  - don't enable video code for modules without graphics controller
  - provide useful (though different) mtdparts settings
  - get rid of CONFIG_CS_AUTOCONF which was always set anyway

* Extend mkconfig tool to print more useful target name
2006-07-21 11:16:34 +02:00
Wolfgang Denk
45a212c4d7 Add support for new TQM5200 revisions
- Support for TQM5200S (short version without graphic controller)
- Support for modules with 'N' type S29GL128N Spansion flashes
  (requires changes to flash layout)
- Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19 17:52:30 +02:00
Markus Klotzbuecher
090eb73510 Add support for TQM885D board.
Patch by Martin Krause, 20 Mar 2006

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12 15:26:01 +02:00
Markus Klotzbuecher
b02d0177c1 Support for spc1920 board.
Patch by Markus Klotzbuecher, 12 Jul 2006
2006-07-12 08:48:24 +02:00
Wolfgang Denk
0095b787fe Merge with /home/m8/git/u-boot 2006-07-05 10:03:52 +02:00
Marian Balakowicz
ce05de2950 Add AMCC bamboo board to MAKEALL build script. 2006-07-04 08:47:23 +02:00
Wolfgang Denk
3b5f61a025 Merge with /home/m8/git/u-boot 2006-06-30 19:32:25 +02:00
Marian Balakowicz
f6e5739a68 Merge: Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 18:19:42 +02:00
Marian Balakowicz
6c5879f380 Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 16:30:46 +02:00
Wolfgang Denk
a63c31cff5 Cleanup trab board for GCC-4.x 2006-06-26 10:54:52 +02:00
Wolfgang Denk
f73e73ba0e Merge with /home/hs/U-Boot/u-boot-dev 2006-06-20 00:12:59 +02:00
Heiko Schocher
f5e0d03970 Add support for wrPPMC7xx/74xx boards
Patch from Richard Danter, 12 Aug 2005
2006-06-19 11:02:41 +02:00
Wolfgang Denk
0c32d96ddd Add support for gth2 board
Patch by Thomas Lange, Aug 11 2005
2006-06-16 17:32:31 +02:00
Wolfgang Denk
cd65a3dc87 Adjust TQM5200 make targets
Make the automatic CS configuration the default.
The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
and CONFIG_TQM5200_AC are removed.
"TQM5200_config" is now the default for STK52XX.200 base boards.
On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
Patch by Martin Krause, 07 Nov 2005
2006-06-16 16:11:34 +02:00
Wolfgang Denk
4176c79964 Merge with /home/hs/U-Boot/u-boot-dev 2006-06-10 19:27:47 +02:00
Scott McNutt
9cc8337832 Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
Patch by Scott McNutt, 08 Jun 2006
2006-06-08 13:37:39 -04:00
Stefan Roese
a4c8d1389f Add support for PCS440EP board
Patch by Stefan Roese, 02 Jun 2006
2006-06-02 16:20:36 +02:00
Wolfgang Denk
ba94a1bba3 * Update Intel IXP4xx support
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006

[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
 sufferes from licensing issues. Blame Intel.]
2006-05-30 15:56:48 +02:00
Wolfgang Denk
1cfefe8cb6 Merge with /home/m8/git/u-boot 2006-05-09 13:46:55 +02:00
Marian Balakowicz
78b123cd69 Add M5271EVB board support. 2006-05-09 11:54:44 +02:00
Wolfgang Denk
0cf7d8aa0b Merge with git://git.kernel.org/pub/scm/boot/u-boot/galak/u-boot.git#mpc8349emds 2006-05-03 17:52:20 +02:00
Heiko Schocher
5720df78ad add forgotten changes for the PLEB 2 Board.
Patch from David Snowdon, 13. Aug 2005
2006-05-02 07:51:46 +02:00
Marian Balakowicz
7a635e004e Add support for Freescale M5271: Merge with /work/u-boot.mcf5271 2006-04-27 19:12:19 +02:00
Heiko Schocher
0e0ef590b2 Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40
Patch from Scott McNutt, 11 Aug 2005
2006-04-26 08:13:18 +02:00
dzu@denx.de
6ca24c64a5 Add support for BC3450 board
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-21 18:30:47 +02:00
Kumar Gala
8fe9bf61ef Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
- Removed MPC8349ADS port
  - Added PCI support to MPC8349ADS
  - reworked memory map to allow mapping of all regions with BATs
  Patch by Kumar Gala 20 Apr 2006

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-20 13:45:32 -05:00
Heiko Schocher
9acb626fc1 Add MCF5282 support (without preloader)
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
2006-04-20 08:42:42 +02:00
Wolfgang Denk
0a112d8696 Merge with port of MPC8349EMDS board 2006-03-17 17:41:56 +01:00
Wolfgang Denk
09e4b0c5d3 Add support for Lite5200B board.
Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-17 11:42:53 +01:00
Marian Balakowicz
991425fe05 Add initial support for MPC8349E MDS board. 2006-03-14 16:24:38 +01:00
Wolfgang Denk
84c960ce6d Add support for EmbeddedPlanet EP88x boards
Patch by Yuli Barcohen, 13 Jul 2005
2006-03-12 23:17:31 +01:00
Wolfgang Denk
0be248fa9a Cleanup (get rid of debug code that sneaked in) 2006-03-07 00:22:36 +01:00
Wolfgang Denk
951a954b77 Merge with /home/wd/git/u-boot/master
Code cleanup.
2006-03-06 23:18:48 +01:00
Wolfgang Denk
4e3ccd2692 Merge the new NAND code (testing-NAND brach); see doc/README.nand
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005

[Merge with /home/tur/nand/u-boot]
2006-03-06 11:25:22 +01:00
Bartlomiej Sieka
addb2e1650 Re-factoring the legacy NAND code (legacy NAND now only in board-specific
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
Wolfgang Denk
c81eb1f5f5 Cleanup MCC200 board. 2006-02-24 01:42:40 +01:00
Markus Klotzbcher
4f7a0e3671 New board directory and config for the benq delta board (copied from
zylonite). Minor pxa-regs.h update.
2006-02-20 16:37:37 +01:00
Markus Klotzbcher
e0269579a5 This is the first commit for the u-boot zylonite port. The following has be
done so far:

	* created zylonite board dir (based on lubbock)
	* extended some - but not all pxa sources and headers for Intel
	  Monahans support (CONFIG_CPU_MONAHANS)
	* created Makefile zylonite target + MAKEALL entry
	* added some debug nonsense, remove later, grep for mk@tbd

Status: compiles (eldk-4.0), and can be started with BDI, but runs forever
	and doesn't halt at breakpoints. Hmmm...
2006-02-07 20:04:48 +01:00
Zachary P. Landau
f8c3b4f310 Add ColdFire targets to MAKEALL script 2006-01-26 17:38:46 -05:00
Stefan Roese
d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked:
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
Stefan Roese
6e7fb6eaa5 Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
Stefan Roese
5568e613ee Add support for Prodrive P3P440 board:
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
  for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
Stefan Roese
feaedfcf84 New PPC 405EP board added: CMS700
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
2005-11-15 10:35:59 +01:00
Stefan Roese
e9f1110051 Add missing 4xx board to MAKEALL
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:40:17 +02:00
Marian Balakowicz
e6f2e90233 Added support for TQM834x boards. 2005-10-11 19:09:42 +02:00
Wolfgang Denk
7521af1c7d Add support for AP1000 board.
Patch by James MacAulay, 07 Oct 2005
2005-10-09 01:04:33 +02:00
Wolfgang Denk
87cb6862b9 Update make target for ARM supported boards.
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
2005-10-06 17:08:18 +02:00
Wolfgang Denk
645da51097 Add support for Cogent csb637
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:00:09 +02:00
Wolfgang Denk
99b0d2851a Added support for KwikByte KB920x boards (based on AT91RM9200)
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
2005-10-05 00:19:34 +02:00
Wolfgang Denk
0e4018d244 Add support for MP2USB board.
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:14:38 +02:00
Wolfgang Denk
c570b2fdf5 Add board support for armadillo HT1070
Patch by Rowel Atienza, 06 Apr 2005
2005-09-26 01:06:33 +02:00
Wolfgang Denk
8e6f1a8ec2 Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
Patch by Marc Leeman, 04 Mar 2005
2005-09-25 18:59:36 +02:00
Wolfgang Denk
2df741bf7c Add Vibren (was Accelent) PXA255 IDP Support
Patch by Cliff Brake, 04 Feb 2005
2005-09-25 15:57:49 +02:00
Wolfgang Denk
74f4304ee7 Add ARM946E cpu and core module targets; remap memory to 0x00000000
Patch by Peter Pearse, 2 Feb 2005
2005-09-25 01:48:28 +02:00
Stefan Roese
7644f16f6b esd CPCI2DP board added
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:16:57 +02:00
Stefan Roese
9d2a873bdf Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
2005-08-31 12:55:50 +02:00
Wolfgang Denk
ec2e5a2cce Merge with testing-4xx_enet (Create generic 4xx Ethernet code) 2005-08-23 23:03:20 +02:00
Stefan Roese
5e4b3361bc Add esd cpci5200 and pf5200 boards
Patch by Reinhard Arlt, 22 Aug 2005
2005-08-22 17:51:53 +02:00
Stefan Roese
d6c61aabc4 Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
now handling all 4xx cpu's.
Patch by Stefan Roese, 16 Aug 2005
2005-08-16 18:18:00 +02:00
22e05df45c Merge with pollux.denx.org:/home/git/u-boot/.git 2005-08-16 17:34:22 +02:00
Wolfgang Denk
3d078ce6d7 Coding style cleanup 2005-08-15 16:03:56 +02:00
Stefan Roese
b79316f2a2 Add Sandburst Metrobox and Sandburst Karef board support packages.
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005

Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
2005-08-15 12:31:23 +02:00
Wolfgang Denk
b62bdffb75 Adjust MAKEALL script for little endian MIPS build tests 2005-08-14 00:27:00 +02:00
f1340e2273 Added support for O2DNT board. 2005-08-09 14:48:07 +02:00
Wolfgang Denk
f901a83b70 Add support for ep8248 board
Patch by Yuli Barcohen, 12 Dec 2004

Minor code cleanup.
2005-08-06 01:42:58 +02:00
Wolfgang Denk
b4f15fdaf7 Merge with /home/wd/git/u-boot/jon_loeliger 2005-08-05 20:03:38 +02:00
Wolfgang Denk
b20d00328c Add support for MicroSys PM856 board
Patch by Josef Wagner, 03 Aug 2005
2005-08-05 12:19:30 +02:00
Jon Loeliger
4b1d95d96a Merge with rsync://git-user@source.denx.net/git/u-boot.git 2005-08-02 13:53:07 -05:00
Stefan Roese
8a316c9b62 Major cleanup for AMCC PPC4xx eval boards.
Patch by Stefan Roese, 01 Aug 2005
2005-08-01 16:49:12 +02:00
Lunsheng Wang
b0e3294923 * Patch by Ron Alder, 11 July 2005
Add Xianghua Xiao and Lunsheng Wang's support for the
    GDA MPC8540 EVAL board.
2005-07-29 10:20:29 -05:00
Eran Liberty
f046ccd15c * Patch by Eran Liberty
Add support for the Freescale MPC8349ADS board.
2005-07-28 10:08:46 -05:00
Jon Loeliger
d9b94f28a4 * Patch by Jon Loeliger, 2005-05-05
Implemented support for MPC8548CDS board.
  Added DDR II support based on SPD values for MPC85xx boards.
  This roll-up patch also includes bugfies for the previously
  published patches:
    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
2005-07-25 14:05:07 -05:00
Wolfgang Denk
3bb9cec962 Fix file permissions 2005-07-21 11:22:21 +02:00
wdenk
342717f72a * Fix baudrate calculation problem on MPC5200 systems
* Add MPC8220 boards to MAKEALL script

* Add EEPROM and RTC support for HMI1001 board

* Patch by Detlev Zundel, 20 Jun 2005:
  Fix initialization of low active GPIO pins on inka4x0 board
2005-06-27 13:30:03 +00:00
wdenk
20787e23b8 * Patches by Robert Whaley, 29 Nov 2004:
- update the pxa-regs.h file for PXA27x chips
  - add PXA27x based ADSVIX board
  - add support for MMC on PXA27x processors

* Patch by Andrew E. Mileski, 28 Nov 2004:
  Fix PPC4xx SPD SDRAM detection bug

* Patch by Hiroshi Ito, 26 Nov 2004:
  Fix logic of "test -z" and "test -n" commands
2005-04-06 00:04:16 +00:00
wdenk
3c2b3d454d * Patch by Ladislav Michl, 05 Apr 2005:
Add support for VoiceBlue board.

* Patch by Ladislav Michl, 05 Apr 2005:
  Fix netboot_common() prototypes.

* Cleanup.
2005-04-05 23:32:21 +00:00
wdenk
8b0bfc6804 * Patch by Yuli Barcohen, 08 Nov 2004:
Add support for Analogue & Micro Rattler boards.
  Tested on Rattler8248.

* Patch by Andre Renaud, 08 Nov 2004:
  Fix watchdog support in common/lcd.c

* Patch by Marc Leeman, 05 Nov 2003:
  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
  bug only affects the XPC8245 processors
2005-04-03 23:11:38 +00:00
wdenk
384cc68744 Patches by Josef Wagner, 29 Oct 2004:
- Add support for MicroSys CPU87 board
- Add support for MicroSys PM854 board
2005-04-03 22:35:21 +00:00
wdenk
756f586a73 * Patch by Yusdi Santoso, 22 Oct 2004:
- Add support for HIDDEN_DRAGON board
  - fix endianess problem in driver/rtl1839.c

* Patch by Allen Curtis, 21 Oct 2004:
  support multiple serial ports
2005-04-03 15:51:42 +00:00
wdenk
8f0b7cbe80 Patches by Martin Krause, 22 Mar 2005:
- use TQM5200_auto as MAKEALL target for TQM5200 systems
- add support for SM501 graphics controller
- add support for graphic console on TQM5200
- add support for TQM5200 Rev 200
- cleanup, fix typo in include/configs/TQM5200.h
2005-03-27 23:41:39 +00:00
wdenk
bf7019c570 Add TQM8540 to MAKEALL lists 2005-03-15 00:03:03 +00:00
wdenk
8ed9604613 * Patches by Richard Woodruff, 01 Oct 2004:
add support for the TI OMAP2420 processor and its H4 reference
  board

* Patch by Christian Pellegrin, 24 Sep 2004:
  Added support for NE2000 compatible (DP8390, DP83902) NICs.
2005-01-09 23:16:25 +00:00
wdenk
ff36fd8591 * Patch by Leif Lindholm, 23 Sep 2004:
add support for the AMD db1550 board

* Patch by Travis Sawyer, 15 Sep 2004:
  Add CONFIG_SERIAL_MULTI support for ppc4xx,
  update README.serial_multi
2005-01-09 22:28:56 +00:00
wdenk
e2ffd59b4d * Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.
2004-12-31 09:32:47 +00:00
wdenk
ec0aee7b68 Cleanup: avoid trigraph warning in fs/ext2/ext2fs.c; rename UC100 -> uc100 2004-12-19 09:58:11 +00:00
wdenk
f7d1572bf5 Add support for UC100 board 2004-12-18 22:35:43 +00:00
stroese
c419d1d6d0 some new esd boards added 2004-12-16 18:44:40 +00:00
wdenk
983fda8391 Patch by TsiChung Liew, 23 Sep 2004:
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
2004-10-28 00:09:35 +00:00
wdenk
c15f3120ec * Patch by Michael Bendzick, 30 Aug 2004:
- Improve platform.S code for omap1510inn that detects whether code
    is running from SDRAM or not. Patch allows SDRAM to be configured
    if code is running out of SRAM at 0x20000000.

* Patch by Frederick Klatt, 30 Aug 2004:
  Add support for the Wind River SBC8540/SBC8560 boards
2004-10-10 22:44:24 +00:00
wdenk
5c952cf024 Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
wdenk
03f5c55021 Patches by Jon Loeliger, 24 Aug 2004:
- Add support for the MPC8541 and MPC8555 CDS boards
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
2004-10-10 21:21:55 +00:00
wdenk
cf33678e51 * Patch by Jon Loeliger, 24 Aug 2004:
- Fix PCI window on MPC85xx; remove unneeded PCI initialization
    from board_early_init_f()
  - Provide SW workaround for PCI initialization on 85xx CDS
  - Convert MPC85xxADS to use common CFI flash driver

* Cleanup: avoid compiler warnings

* Add CMC PU2 board to MAKEALL script
2004-10-10 20:23:57 +00:00
wdenk
da93ed8147 * Patch by Shlomo Kut, 29 Mar 2004:
Add support for MKS Instruments "Quantum" board

* Fix build problem with Cogent boards;
  avoid using <asm/byteorder.h> when using the host compiler
2004-09-29 11:02:56 +00:00
wdenk
4ec3a7f0fd Patch by Vincent Dubey, 24 Sep 2004:
Add support for xaeniax board
2004-09-28 16:44:41 +00:00
wdenk
281e00a3be * Code cleanup
* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
wdenk
6c7a14084a Patch by Mark Jonas, 01 Jul 2004:
Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
MGT5100 and MPC5200 based Freescale platforms.
2004-07-11 19:17:20 +00:00
wdenk
56523f1283 * Patch by Martin Krause, 30 Jun 2004:
Add support for TQM5200 board

* Patch by Martin Krause, 29 Jun 2004:
  Add loopw command: infinite write loop on address range
2004-07-11 17:40:54 +00:00
wdenk
857cad37a4 Patches by Yasushi Shoji, 29 Jun 2004:
- add empty include/asm-microblaze/processor.h
- add to CREDITS and MAINTAINERS
- add gd initialization
- add MicroBlaze and SUZAKU board to MAKEALL script
- add reset support for SUZAKU
- add flush_cache() for MicroBlaze
- add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
  size flash memory on SUZAKU
2004-07-10 23:48:41 +00:00
wdenk
fabd46acff * Patch by Prakash Kumar, 27 Jun 2004:
Add support for the PXA250 based Intrinsyc Cerf board.

* Patch by Yasushi Shoji, 27 Jun 2004:
  fix comment in include/common.h
2004-07-10 23:11:10 +00:00
wdenk
466b74108f * Rename SBC8560 into sbc8560 for consistency
* Patch by Daniel Poirot, 24 Jun 2004:
  Add support for Wind River's sbc8240 board

* Patches by Yasushi Shoji, 26 Jun 2004:
  - drivers/serial_xuartlite.c: fix "return 0" in void function
  - add microblaze support to mkimage tool
2004-07-10 22:35:59 +00:00
wdenk
8b07a1103d * Patch by Fred Klatt, 25 Jun 2004:
Add support for WindRiver's SBC8560 board

* Patch by Nicolas Lacressonniere, 24 Jun 2004
  Small Bugs fixes for "at91rm9200dk" board:
  - Timing modifications for SPI DataFlash access
  - Fix NAND flash detection bug

* Patch by Nicolas Lacressonniere, 24 Jun 2004:
  Add Support for Flash AT49BV6416 for AT91RM9200DK board
2004-07-10 21:45:47 +00:00
wdenk
262381329b * Patch by Yuli Barcohen, 16 Jun 2004:
Remove obsolete AdderII port which was superseded by unified
  AdderII/Adder87x port

* Patch by Ladislav Michl, 16 Jun 2004:
  Fix gcc-3.3.3 warnings for smc91111.c
2004-07-09 22:51:01 +00:00
wdenk
39539887ea * Code cleanup (ARM mostly)
* Patch by Curt Brune, 17 May 2004:
  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
  - Add support for ESPD-Inc. EVB4510 Board
2004-07-01 16:30:44 +00:00
wdenk
2d24a3a787 * Patch by Yuli Barcohen, 09 Jun 2004:
Add support for Analogue&Micro Adder87x and the older AdderII board.

* Patch by Ming-Len Wu, 09 Jun 2004:
  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
2004-06-09 21:50:45 +00:00
wdenk
e63c8ee3dc Patch by Sam Song, 09 Jun 2004:
- Add support for RPXlite_DW board
- Update FLASH driver for 4*AM29DL323DB90VI
- Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
2004-06-09 21:04:48 +00:00
wdenk
ca0e774894 Patch by Kurt Stremerch, 28 May 2004:
Add support for Exys XSEngine board

Some code cleanup.
2004-06-09 15:37:23 +00:00
wdenk
c3c7f861ae Patch by Yuli Barcohen, 20 May 2004:
Add support for Interphase iSPAN boards.
2004-06-09 14:47:54 +00:00
wdenk
f39748ae8e * Patch by Paul Ruhland, 17 May 2004:
- Add support for the Logic Zoom LH7A40x based SDK board(s),
    specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2
2004-06-09 13:37:52 +00:00
wdenk
aa24509041 Patch by Tolunay Orkun, 14 May 2004:
Add support for Cogent CSB472 board (8MB Flash Rev)
2004-06-09 12:47:02 +00:00
wdenk
79fa88f3ed Patch by Pantelis Antoniou, 5 May 2004:
- Intracom board update.
- Add Codec POST.
2004-06-07 23:46:25 +00:00
wdenk
a56bd92289 * Patch by Dave Peverley, 30 Apr 2004:
Add support for OMAP730 Perseus2 Development board

* Patch by Alan J. Luse, 29 Apr 2004:
  Fix flash chip-select (OR0) option register setting on FADS boards.

* Patch by Alan J. Luse, 29 Apr 2004:
  Report MII network speed and duplex setting properly when
  auto-negotiate is not enabled.

* Patch by Jarrett Redd, 29 Apr 2004:
  Fix hang on reset on Ocotea board due to flash in wrong mode.
2004-06-06 23:13:55 +00:00
wdenk
1114257c9d Patch by Yuli Barcohen, 19 Apr 2004:
- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- Clean up FADS family port to use the new defines
2004-06-06 21:35:06 +00:00
wdenk
e35745bb64 * Temporarily disabled John Kerl's extended MII command code because
"miivals.h" is missing

* Patches by Mark Jonas, 13 Apr 2004:
  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
  - Add sync instructions to IceCube SDRAM init code
  - Move SDRAM chip constants into seperate include files
  - Unify DDR and SDR initialization code
  - Unify all IceCube (Lite5xxx) target names
2004-04-18 23:32:11 +00:00
wdenk
7abf0c5886 * Patch by Dan Malek, 07 Apr 2004:
- Add support for RPC/STx GP3, Motorola 8560 board
  - Update 85xx TSEC driver so it searches MII for first available PHY
    and uses that one.
  - Add functions to support console MII commands.

* Patch by Tolunay Orkun, 07 Apr 2004:
  Move  initialization of bi_iic_fast[]
  from board_init_f() to board_init_r()

* Patch by Yasushi Shoji, 07 Apr 2004:
  Cleanup microblaze port

* Patch by Sangmoon Kim, 07 Apr 2004:
  Add auto SDRAM module detection for Debris board
2004-04-18 21:45:42 +00:00
wdenk
ea66bc8804 * Patch by George G. Davis, 02 Apr 2004:
add support for Intel Assabet board
2004-04-15 23:23:39 +00:00
wdenk
db01a2ea99 * Patch by Stephen Williams, 01 Apr 2004:
Add support for Picture Elements JSE board

* Patch by Christian Pell, 01 Apr 2004:
  Add CompactFlash support for PXA systems.
2004-04-15 23:14:49 +00:00
wdenk
04a85b3b36 * Patches by Pantelis Antoniou, 30 Mar 2004:
- add auto-complete support to the U-Boot CLI
  - add support for NETTA and NETPHONE boards; fix NETVIA board

* Patch by Yuli Barcohen, 28 Mar 2004:
  - Add support for MPC8272 family including MPC8247/8248/8271/8272
  - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
  - Change configuration method for MPC8260ADS family
2004-04-15 18:22:41 +00:00
wdenk
0608e04da9 * Patch by Klaus Heydeck, 13 Mar 2003:
Add support for KUP4X Board
2004-03-25 19:29:38 +00:00
wdenk
efa329cb89 * Add start-up delay to make sure power has stabilized before
attempting to switch on USB on SX1 board.

* Patch by Josef Wagner, 18 Mar 2004:
  - Add support for MicroSys XM250 board (PXA255)
  - Add support for MicroSys PM828 board (MPC8280)
  - Add support for 32 MB Flash on PM825/826
  - new SDRAM refresh rate for PM825/PM826
  - added support for MicroSys PM520 (MPC5200)
  - replaced Query by Identify command in CPU86/flash.c
    to support 28F160F3B

* Fix wrap around problem with udelay() on ARM920T

* Add support for Macronix flash on TRAB board
2004-03-23 20:18:25 +00:00
wdenk
855a496fe9 * Patches by Travis Sawyer, 12 Mar 2004:
- Fix Gigabit Ethernet support for 440GX
  - Add Gigabit Ethernet Support to MII PHY utilities

* Patch by Brad Kemp, 12 Mar 2004:
  Fixes for drivers/cfi_flash.c:
  - Better support for x8/x16 implementations
  - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
  - Added defines for AMD command and address constants

* Patch by Leon Kukovec, 12 Mar 2004:
  Fix get_dentfromdir() to correctly handle deleted dentries

* Patch by George G. Davis, 11 Mar 2004:
  Remove hard coded network settings in TI OMAP1610 H2
  default board config

* Patch by George G. Davis, 11 Mar 2004:
  add support for ADS GraphicsClient+ board.
2004-03-14 18:23:55 +00:00
wdenk
aaf224ab4e * Patch by Stephan Linz, 09 Mar 2004
- Add support for the SSV ADNP/ESC1 (Nios Softcore)

* Patch by George G. Davis, 9 Mar 2004:
  fix recent build failure for SA1100 target

* Patch by Travis Sawyer, 09 Mar 2004:
  Support native interrupt mode for the IBM440GX.
  Previously it was running in 440GP compatibility mode.
2004-03-14 15:20:55 +00:00
wdenk
3d3befa754 * Patch by Philippe Robin, 09 Mar 2004:
Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
  Platform support.

* Patch by Masami Komiya, 08 Mar 2004:
  Don't overwrite server IP address or boot file name
  when the boot server does not return values

* Patch by listmember@orkun.us, 5 Mar 2004:
  Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2004-03-14 15:06:13 +00:00
wdenk
0e6d798cb3 * Patch by Travis Sawyer, 01 Mar 2004:
Ocotea:
  - Add IBM PPC440GX Ref Platform support (Ocotea)
    Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
    Adapted to U-Boot and 440GX port
  440gx_enet.c:
  - Add gracious handling of all Ethernet Pin Selections for 440GX
  - Add RGMII selection for Cicada CIS8201 Gigabit PHY
  ppc440.h:
  - Add needed bit definitions
  - Fix formatting

* Patch by Carl Riechers, 1 Mar 2004:
  Add PPC440GX prbdv0 divider to fix memory clock calculation.

* Patch by Stephan Linz, 27 Feb 2004
  - avoid problems for targets without NFS download support
2004-03-14 00:07:33 +00:00
wdenk
80885a9d52 * Patch by Markus Pietrek, 24 Feb 2004:
NS9750 DevBoard added

* Patch by Pierre AUBERT, 24 Feb 2004
  add USB support for MPC5200

* Patch by Steven Scholz, 24 Feb 2004:
  - fix MII commands to use values from last command

* Patch by Torsten Demke, 24 Feb 2004:
  Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2004-02-26 23:46:20 +00:00
wdenk
074cff0d28 * Patch by Andrea Scian, 17 Feb 2004:
Add support for S3C44B0 processor and DAVE B2 board

* Patch by Steven Scholz, 20 Feb 2004:
  - Add support for MII commands on AT91RM9200 boards
  - some cleanup in AT91RM9200 ethernet code
2004-02-24 00:16:43 +00:00
wdenk
028ab6b598 * Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform

* Patch by Stephan Linz, 17 Feb 2004:
  Fix watchdog support for NIOS

* Patch by Josh Fryman, 16 Feb 2004:
  Fix byte-swapping for cfi_flash.c for different bus widths

* Patch by Jon Diekema, 14 Jeb 2004:
  Remove duplicate "FPGA Support" notes from the README file
2004-02-23 23:54:43 +00:00
wdenk
63e73c9a8e * Patches by Reinhard Meyer, 14 Feb 2004:
- update board/emk tree; use common flash driver
  - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
    [adapted for other PPC CPUs -- wd]
  - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c

* Patch by Jon Diekema, 13 Feb 2004:
  Call show_boot_progress() whenever POST "FAILED" is printed.

* Patch by Nishant Kamat, 13 Feb 2004:
  Add support for TI OMAP1610 H2 Board
  Fixes for cpu/arm926ejs/interrupt.c
       (based on Richard Woodruff's patch for arm925, 16 Oct 03)
  Fix for a timer bug in OMAP1610 Innovator
  Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2

* Patches by Stephan Linz, 12 Feb 2004:
  - add support for NIOS timer with variable period preload counter value
  - prepare POST framework support for NIOS targets

* Patch by Denis Peter, 11 Feb 2004:
  add POST support for the MIP405 board
2004-02-23 22:22:28 +00:00
wdenk
cd0a9de68b * Patch by Laurent Mohin, 10 Feb 2004:
Fix buffer overflow in common/usb.c

* Patch by Tolunay Orkun, 10 Feb 2004:
  Add support for Cogent CSB272 board

* Code cleanup
2004-02-23 20:48:38 +00:00
wdenk
ec4c544bed Patches by Stephan Linz, 30 Jan 2004:
1: - board/altera/common/flash.c:flash_erase():
     o allow interrupts befor get_timer() call
     o check-up each erased sector and avoid unexpected timeouts
   - board/altera/dk1c20/dk1s10.c:board_early_init_f():
     o enclose sevenseg_set() in cpp condition
   - remove the ASMI configuration for DK1S10_standard_32 (never present)
   - fix some typed in mistakes in the NIOS documentation
2: - split DK1C20 configuration into several header files:
     o two new files for each NIOS CPU description
     o U-Boot related part is remaining in DK1C20.h
3: - split DK1S10 configuration into several header files:
     o two new files for each NIOS CPU description
     o U-Boot related part is remaining in DK1S10.h
4: - Add support for the Microtronix Linux Development Kit
     NIOS CPU configuration at the Altera Nios Development Kit,
     Stratix Edition (DK-1S10)
5: - Add documentation for the Altera Nios Development Kit,
     Stratix Edition (DK-1S10)
6: - Add support for the Nios Serial Peripharel Interface (SPI)
     (master only)
7: - Add support for the common U-Boot SPI framework at
     RTC driver DS1306
2004-02-09 23:12:24 +00:00
wdenk
ba56f62576 Patch by Travis Sawyer, 30 Dec 2003:
Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
select MDI port based on enabled EMAC device.
Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
base PrPMC board.
2004-02-06 23:19:44 +00:00