Commit graph

382 commits

Author SHA1 Message Date
Tom Rini
da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
Fabio Estevam
f8fdb81f6c compat: Remove is_power_of_2() definition
Use the is_power_of_2() definition from log2.h to align with the
kernel implementation.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05 16:46:59 -05:00
Heiko Schocher
0195a7bb36 ubi,ubifs: sync with linux v4.2
sync with linux v4.2

commit 64291f7db5bd8150a74ad2036f1037e6a0428df2
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Sun Aug 30 11:34:09 2015 -0700

    Linux 4.2

This update is needed, as it turned out, that fastmap
was in experimental/broken state in kernel v3.15, which
was the last base for U-Boot.

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-10-26 09:22:36 +01:00
Hans de Goede
251cee0db2 ubifs: Add generic fs support
Add generic fs support, so that commands like ls, load and test -e can be
used on ubifs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-10-24 13:50:32 -04:00
Hans de Goede
29cc5bcadf ubifs: Add functions for generic fs use
Implement the necessary functions for implementing generic fs support
for ubifs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-10-24 13:50:32 -04:00
Hans de Goede
ad15749b6d ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use
Modify the ubifs u-boot wrapper function prototypes for generic fs use,
and give them their own header file.

This is a preparation patch for adding ubifs support to the generic fs
code from fs/fs.c.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-10-24 13:50:31 -04:00
Benoît Thébaudeau
1254b44a9f fs/fat/fat_write: Fix management of empty files
Overwriting an empty file not created by U-Boot did not work, and it
could even corrupt the FAT. Moreover, creating empty files or emptying
existing files allocated a cluster, which is not standard.

Fix this by always keeping empty files clusterless as specified by
Microsoft (the start cluster must be set to 0 in the directory entry in
that case), and by supporting overwriting such files.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:08 -04:00
Benoît Thébaudeau
e876be4b5c fs/fat/fat_write: Factor out duplicate code
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:08 -04:00
Benoît Thébaudeau
5e1a860e6c fs/fat/fat_write: Fix curclust/newclust mix-up
curclust was used instead of newclust in the debug() calls and in one
CHECK_CLUST() call, which could skip a failure case.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:07 -04:00
Benoît Thébaudeau
1d7f2ece69 fs/fat/fat_write: Merge calls to set_cluster()
set_contents() had uselessly split calls to set_cluster(). Merge these
calls, which removes some cases of set_cluster() being called with a
size of zero.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:07 -04:00
Benoît Thébaudeau
8133f43d1c fs/fat/fat_write: Fix buffer alignments
set_cluster() was using a temporary buffer without enforcing its
alignment for DMA and cache. Moreover, it did not check the alignment of
the passed buffer, which can come directly from applicative code or from
the user.

This could cause random data corruption, which has been observed on
i.MX25 writing to an SD card.

Fix this by only passing ARCH_DMA_MINALIGN-aligned buffers to
disk_write(), which requires the introduction of a buffer bouncing
mechanism for the misaligned buffers passed to set_cluster().

By the way, improve the handling of the corresponding return values from
disk_write():
 - print them with debug() in case of error,
 - consider that there is an error is disk_write() returns a smaller
   block count than the requested one, not only if its return value is
   negative.

After this change, set_cluster() and get_cluster() are almost
symmetrical.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2015-10-11 17:12:07 -04:00
Gary Bisson
9d2f6a9ae7 fs: ext4: fix symlink read function
Since last API changes for files >2GB, the read of symlink is broken as
ext4fs_read_file now returns 0 instead of the length of the actual read.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2015-09-11 17:15:29 -04:00
Stephen Warren
d56b2015e6 ext4: fix leak in check_filename()
root_first_block_buffer should be free()d in all cases, not just when an
error occurs. Fix the success exit path of the function to do this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:23 -04:00
Stephen Warren
934b14f2bb ext4: free allocations by parse_path()
parse_path() malloc()s the entries in the array it's passed. Those
allocations must be free()d by the caller, ext4fs_get_parent_inode_num().
Add code to do this.

For this to work, all the array entries must be dynamically allocated,
rather than a mix of dynamic and static allocations. Fix parse_path() not
to over-write arr[0] with a pointer to statically allocated data.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:22 -04:00
Stephen Warren
676505f5ce ext4: avoid calling ext4fs_mount() twice, which leaks
ext4_write_file() is only called from the "fs" layer, which calls both
ext4fs_mount() and ext4fs_close() before/after calling ext4_write_file().
Fix ext4_write_file() not to call ext4fs_mount() again, since the mount
operation malloc()s some RAM which is leaked when a second mount call
over-writes the pointer to that data, if no intervening close call is
made.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:22 -04:00
Łukasz Majewski
0a04ed86cf FIX: fat: Provide correct return code from disk_{read|write} to upper layers
It is very common that FAT code is using following pattern:
if (disk_{read|write}() < 0)
        return -1;

Up till now the above code was dead, since disk_{read|write) could only
return value >= 0.
As a result some errors from medium layer (i.e. eMMC/SD) were not caught.

The above behavior was caused by block_{read|write|erase} declared at
struct block_dev_desc (@part.h). It returns unsigned long, where 0
indicates error and > 0 indicates that medium operation was correct.

This patch as error regards 0 returned from block_{read|write|erase}
when nr_blocks is grater than zero. Read/Write operation with nr_blocks=0
should return 0 and hence is not considered as an error.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>

Test HW: Odroid XU3 - Exynos 5433
2015-09-11 17:15:21 -04:00
Simon Glass
cf92e05c01 Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header
Now that we have a new header file for cache-aligned allocation, we should
move the stack-based allocation macro there also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-11 17:15:20 -04:00
Simon Glass
6e295186c7 Move malloc_cache_aligned() to its own header
At present malloc.h is included everywhere since it recently was added to
common.h in this commit:

   4519668 mtd/nand/ubi: assortment of alignment fixes

This seems wasteful and unnecessary. We have been trying to trim down
common.h and put separate functions into separate header files and that
change goes in the opposite direction.

Move malloc_cache_aligned() to a new header so that this can be avoided.
The header would perhaps be better named as alignmem.h but it needs to be
included after common.h and people might be confused by this. With the name
memalign.h it fits nicely after malloc() in most cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-09-11 17:15:16 -04:00
Stephen Warren
18a10d46f2 fat: handle paths that include ../
The FAT code contains a special case to parse the root directory. This
is needed since the root directory location/layout on disk is special
cased for FAT12/16. In particular, the location and size of the FAT12/16
root directory is hard-coded and contiguous, whereas all FAT12/16 non-root
directories, and all FAT32 directories, are stored in a non-contiguous
fashion, with the layout represented by a linked-list of clusters in the
FAT.

If a file path contains ../ (for example /extlinux/../bcm2835-rpi-cm.dtb),
it is possible to need to parse the root directory for the first element
in the path (requiring application of the special case), then a sub-
directory (in the general way), then re-parse the root directory (again
requiring the special case). However, the current code in U-Boot only
applies the special case for the very first path element, and never for
any later path element. When reparsing the root directory without
applying the special case, any file in a sector (or cluster?) other than
the first sector/cluster of the root directory will not be found.

This change modifies the non-root-dir-parsing loop of do_fat_read_at()
to detect if it's walked back to the root directory, and if so, jumps
back to the special case code that handles parsing of the root directory.

This change was tested using sandbox by executing:

./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/.."
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/"
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/.."
./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/../"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /bcm2835-rpi-cm.dtb"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/../bcm2835-rpi-cm.dtb"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /backup/../bcm2835-rpi-cm.dtb"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/..backup/../bcm2835-rpi-cm.dtb"
./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/../backup/../bcm2835-rpi-cm.dtb"

(/extlinux and /backup are in different sectors so trigger some different
cases, and bcm2835-rpi-cm.dtb is in a sector of the root directory other
than the first).

In all honesty, this change is a bit of a hack, using goto and all.
However, as demonstrated above it appears to work well in practice, is
quite minimal, likely doesn't introduce any risk of regressions, and
hopefully doesn't introduce any maintenance issues.

The correct fix would be to collapse the root and non-root loops in
do_fat_read_at() and get_dentfromdir() into a single loop that has a
small special-case when moving from one sector to the next, to handle
the layout difference of root/non-root directories. AFAIK all other
aspects of directory parsing are identical. However, that's a much
larger change which needs significantly more thought before it's
implemented.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-09-11 14:05:33 -04:00
Marcel Ziswiler
4519668b29 mtd/nand/ubi: assortment of alignment fixes
Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer
alignment into account which led to failures of the following form:

ERROR: v7_dcache_inval_range - start address is not aligned - 0x1f7f0108
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1f7f1108

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Scott Wood <scottwood@freescale.com>
[trini: Add __UBOOT__ hunk to lib/zlib/zutil.c due to malloc.h in common.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-28 12:33:17 -04:00
Max Krummenacher
7a3e70cfd8 fs/fs.c: read up to EOF when len would read past EOF
http://lists.denx.de/pipermail/u-boot/2012-September/134347.html
allows for reading files in chunks from the shell.

When this feature is used to read past the end of a file an error
was returned instead of returning the bytes read up to the end of
file. Thus the following fails in the shell:

offset = 0
len = chunksize
do
	read file, offset, len
	write data
until bytes_read < len

The patch changes the behaviour to printing an informational
message and returning the actual read number of bytes aka read(2)
behaviour for convenient use in U-Boot scripts.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-08-13 07:19:35 -04:00
Mark Tomlinson
10d3ac346f JFFS2: Use merge sort when parsing filesystem
When building the file system the existing code does an insertion into
a linked list. It attempts to speed this up by keeping a pointer to
where the last entry was inserted but it's still slow.

Now the nodes are just inserted into the list without searching
through for the correct place. This unsorted list is then sorted once
using mergesort after all the entries have been added to the list.
This speeds up the scanning of the flash file system considerably.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:32 -04:00
Mark Tomlinson
54a883840b JFFS2: Use CLEANMARKER to reduce scanning time
If a sector has a CLEANMARKER at the beginning, it indicates that the
entire sector has been erased. Therefore, if this is found, we can skip the
entire block. This was not being done before this patch.

The code now does the same as the kernel does when encountering a
CLEANMARKER. It still checks that the next few words are FFFFFFFF, and if
so, the block is assumed to be empty, and so is skipped.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:32 -04:00
Mark Tomlinson
081adef7e6 JFFS2: Change scansize to match linux kernel
The scan code is similar to the linux kernel, but the kernel defines a much
smaller size to scan through before deciding a sector is blank. Assuming
that what is in the kernel is OK, make these two match.

On its own, this change makes no difference to scanning of any sectors
which have a clean marker at the beginning, since the entire sector is not
blank.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:31 -04:00
Mark Tomlinson
c5b1940f57 JFFS2: Optimize building lists during scan
If the flash is slow, reading less from the flash into buffers makes
the process faster.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:31 -04:00
Mark Tomlinson
2d6d93a2dd JFFS2: Improve speed reading flash files
jffs2_1pass_read_inode() would read the entire data for each node
in the filesystem, regardless of whether it was part of the file
to be loaded or not. By only reading the header data for an inode,
and then reading the data only when it is found to be part of the
file to be loaded, much copying of data is saved.

jffs2_1pass_list_inodes() read each inode for every file in the
directory into a buffer. By using NULL as a buffer pointer, NOR
flash simply returns a pointer, and therefore avoids a memory copy.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:30 -04:00
Mark Tomlinson
891224a5d8 JFFS2: Only list each directory entry once
If multiple versions of a file exist, only the most recent version
should be used. The scheme to write 0 for the inode in older versions
did not work, since this would have required writing to flash.

The only time this caused an issue was listing a directory, where older
versions of the file would still be seen. Since the directory entries
are sorted, just look at the next entry in the list, and if it's the same
move to that entry instead.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:30 -04:00
Mark Tomlinson
225cf4cdf9 JFFS2: Speed up and fix comparison functions
Copying complete nodes from flash can be slow if the flash is slow
to read. By only reading the data needed, the sorting operation can
be made much faster.

The directory entry comparison function also had a two bugs. First, it
did not ensure the name was copied, so the name comparison may have
been faulty (although it would have worked with NOR flash).  Second,
setting the ino to zero to ignore the entry did not work, since this
was either writing to a temporary buffer, or (for NOR flash) directly
to flash. Either way, the change was not remembered.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:29 -04:00
Mark Tomlinson
3799b3f4ad JFFS2: Return early when file read not necessary
If a destination is not provided, jffs2_1pass_read_inode() only
returns the length of the file. In this case, avoid reading all
the data nodes, and return as soon as the length of the file is
known.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
2015-08-12 20:47:29 -04:00
Sjoerd Simons
85300a9a9d sandbox: only do sandboxfs for hostfs interface
Only do sandbox filesystem access when using the hostfs device
interface, rather then falling back to it in all cases. This prevents
confusion situations due to the fallback being taken rather then an
unsupported error being raised.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-19 14:45:56 -06:00
Joe Hershberger
0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Przemyslaw Marczak
22b7509efb fs: ext4 write: return file len on success
After rework of the file system API, the size of ext4
write was missed. This causes printing unreliable write
size at the end of the file system write operation.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2015-03-05 20:49:42 -05:00
Tom Rini
7f641d53bb Merge branch 'master' of git://git.denx.de/u-boot-ubi 2015-02-04 13:30:00 -05:00
Sjoerd Simons
1a1ad8e090 fs: Add command to retrieve the filesystem type
New command to determine the filesystem type of a given partition.
Optionally stores the filesystem type in a environment variable.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2015-01-29 13:36:54 -05:00
Anton Habegger
040cc7b3be ubifs: Enable journal replay during mount
Enable ubifs_replay_journal during mount_ubifs, which was
disabled before.

This commit fix an issue with unrecoverable ubifs volumes
after power cut.

Therefor the gc.c is imported now from 1860e37 Linux 3.15

hs: added SPDX-License-Identifier for fs/ubifs/gc.c

Signed-off-by: Anton Habegger <anton.habegger@gmail.com>
2015-01-29 09:34:03 +01:00
Anton Habegger
dc2884315d ubifs: Import atomic_long operations from Linux
This commit is a preperation for a subsequent UBIFS commit
which needs atomic_long operations.

Therefor "include/asm-generic/atomic-long.h" is imported
from 1860e37 Linux 3.15

Signed-off-by: Anton Habegger <anton.habegger@gmail.com>
2015-01-28 07:42:35 +01:00
Przemyslaw Marczak
64f65e1e36 fs: fat: read: fix fat16 ls/read issue
The present fat implementation ignores FAT16 long name
directory entries which aren't placed in a single sector.

This was becouse of the buffer was always filled by the
two sectors, and the loop was made also for two sectors.

If some file long name entries are stored in two sectors,
the we have two cases:

Case 1:
Both of sectors are in the buffer - all required data
for long file name is in the buffer.
- Read OK!

Case 2:
The current directory entry is placed at the end of the
second buffered sector. And the next entries are placed
in a sector which is not buffered yet. Then two next
sectors are buffered and the mentioned entry is ignored.
- Read fail!

This commit fixes this issue by:
- read two sectors after loop on each single is done
- keep the last used sector as a first in the buffer
  before the read of two next

The commit doesn't affects the fat32 imlementation,
which works good as previous.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Mikhail Zolotaryov <lebon@lebon.org.ua>
Cc: Tom Rini <trini@ti.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Suriyan Ramasami <suriyan.r@gmail.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Tested-by: Simon Glass <sjg@chomium.org>
2015-01-05 15:13:46 -05:00
Tom Rini
9e374e7b72 fs/ext4/ext4fs.c, fs/fs.c fs/fat/fat_write.c: Adjust 64bit math methods
The changes to introduce loff_t into filesize means that we need to do
64bit math on 32bit platforms.  Make sure we use the right wrappers for
these operations.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Suriyan Ramasami <suriyan.r@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
Tested-by: Pierre Aubert <p.aubert@staubli.com>
2014-12-01 15:21:57 -05:00
Suriyan Ramasami
d455d8789d fs: API changes enabling extra parameter to return size of type loff_t
The sandbox/ext4/fat/generic fs commands do not gracefully deal with files
greater than 2GB. Negative values are returned in such cases.

To handle this, the fs functions have been modified to take an additional
parameter of type "* loff_t" which is then populated. The return value
of the fs functions are used only for error conditions.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
[trini: Update board/gdsys/p1022/controlcenterd-id.c,
drivers/fpga/zynqpl.c for changes]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:49:04 -05:00
Suriyan Ramasami
96b1046d1c sandbox: Prepare API change for files greater than 2GB
Change the internal sandbox functions to use loff_t for file offsets.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>

Acked-by: Simon Glass <sjg@chromium.org>
2014-11-23 06:49:04 -05:00
Suriyan Ramasami
9f12cd0e06 ext4: Prepare API change for files greater than 2GB
Change the internal EXT4 functions to use loff_t for offsets.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
[trini: Update common/spl/spl_ext.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:49:04 -05:00
Suriyan Ramasami
1ad0b98a06 fat: Prepare API change for files greater than 2GB
Change the internal FAT functions to use loff_t for offsets.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
[trini: Fix fs/fat/fat.c for min3 updates]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:49:04 -05:00
Christian Gmeiner
59e890ef7b fs: make it possible to read the filesystem UUID
Some filesystems have a UUID stored in its superblock. To
allow using root=UUID=... for the kernel command line we
need a way to read-out the filesystem UUID.

changes rfc -> v1:
 - make the environment variable an option parameter. If not
   given, the UUID is printed out. If given, it is stored in the env
   variable.
 - corrected typos
 - return error codes

changes v1 -> v2:
 - fix return code of do_fs_uuid(..)
 - document do_fs_uuid(..)
 - implement fs_uuid_unsuported(..) be more consistent with the
   way other optional functionality works

changes v2 -> v3:
 - change ext4fs_uuid(..) to make use of #if .. #else .. #endif
   construct to get rid of unreachable code

Hit any key to stop autoboot:  0
=> fsuuid
fsuuid - Look up a filesystem UUID

Usage:
fsuuid <interface> <dev>:<part>
    - print filesystem UUID
fsuuid <interface> <dev>:<part> <varname>
    - set environment variable to filesystem UUID

=> fsuuid mmc 0:1
d9f9fc05-45ae-4a36-a616-fccce0e4f887
=> fsuuid mmc 0:2
eb3db83c-7b28-499f-95ce-9e0bb21cda81
=> fsuuid mmc 0:1 uuid1
=> fsuuid mmc 0:2 uuid2
=> printenv uuid1
uuid1=d9f9fc05-45ae-4a36-a616-fccce0e4f887
=> printenv uuid2
uuid2=eb3db83c-7b28-499f-95ce-9e0bb21cda81
=>

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2014-11-23 06:49:01 -05:00
Masahiro Yamada
b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00
Masahiro Yamada
cba1da495d include: move various macros to include/linux/kernel.h
U-Boot has imported various utility macros from Linux
scattering them to various places without consistency.

In include/common.h are min, max, min3, max3, ARRAY_SIZE, ALIGN,
container_of, DIV_ROUND_UP, etc.
In include/linux/compat.h are min_t, max_t, round_up, round_down,
etc.
We also have duplicated defines of min_t in some *.c files.

Moreover, we are suffering from too cluttered include/common.h.

This commit moves various macros that originate in
include/linux/kernel.h of Linux to their original position.

Note:
This commit simply moves the macros; the macros roundup,
min, max, min2, max3, ARRAY_SIZE are different
from those of Linux at this point.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-20 11:28:25 -05:00
Jorgen Lundman
e183de0d3e ZFS: Clean up cppcheck warnings where relevant, leaked memory etc
In a message from Wolfgang Denk highlighting warnings from cppcheck,
the patch will address those that are correctly diagnosed. Some are
false-positives:

> [fs/zfs/zfs.c:937]: (error) Memory leak: l
dmu_read() allocates "l" if successful, so error-case should not free
it.
> [fs/zfs/zfs.c:1141]: (error) Memory leak: dnbuf
dmu_read() allocates "dnbuf" if successful, so error-case should not
free it.
> [fs/zfs/zfs.c:1372]: (error) Memory leak: osp
zio_read() allocates "osp" if successful, so error-case should
not free it.
> [fs/zfs/zfs.c:1726]: (error) Memory leak: nvlist
int_zfs_fetch_nvlist() allocates "nvlist" if successful, so error-case
should not free it.

Signed-off-by: Jorgen Lundman <lundman@lundman.net>
2014-11-10 16:25:27 -05:00
Guillaume GARDET
592f922261 spl: Add EXT support to SPL
Add EXT filesystem support to SPL.

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
[trini: Fix a warning and checkpatch problems]
Signed-off-by: Tom Rini <trini@ti.com>
2014-10-27 17:54:03 -04:00
Simon Glass
aac618a32b ext4: Use inttypes for printf() string
On 64-bit platforms (like sandbox) 64-bit integers may be 'long' rather
than 'long long'. Use the inttypes header to avoid compiler warnings.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-27 11:04:01 -04:00
Masahiro Yamada
c79cba37b3 cosmetic: replace MIN, MAX with min, max
The macro MIN, MAX is defined as the aliase of min, max,
respectively.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-24 18:30:29 -04:00
Masahiro Yamada
ed36323f6d kconfig: add blank Kconfig files
This would be useful to start moving various config options.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00