Commit graph

145 commits

Author SHA1 Message Date
Lukasz Majewski
4e633e465b arm: exynos: USB3 PHY base definition for Exynos5 SoCs
After that change it would be possible to call samsung_get_base_usb3_phy()
function to get proper base address

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2015-06-08 15:25:41 +02:00
Ajay Kumar
70b4fb660d arm: exynos: add display clocks for Exynos5800
Add get_lcd_clk and set_lcd_clk callbacks for Exynos5800 needed by
exynos video driver.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-04-06 14:34:40 +09:00
Doug Anderson
306f527eff Exynos: Fix L2 cache timings on Exynos5420 and Exynos5800
It was found that the L2 cache timings that we had before could cause
freezes and hangs.  We should make things more robust with better
timings.  Currently the production ChromeOS kernel applies these
timings, but it's nice to fixup firmware too (and upstream probably
won't take our kernel hacks).

This also provides a big cleanup of the L2 cache init code avoiding
some duplication.  The way things used to work:
* low_power_start() was installed by the SPL (both at boot and resume
  time) and left resident in iRAM for the kernel to use when bringing
  up additional CPUs.  It used configure_l2_ctlr() and
  configure_l2_actlr() when it detected it was on an A15.  This was
  needed (despite the L2 cache registers being shared among all A15s)
  because we might have been the first man in after the whole A15
  cluster was shutdown.
* secondary_cores_configure() was called on at boot time and at resume
  time.  Strangely this called configure_l2_ctlr() but not
  configure_l2_actlr() which was almost certainly wrong.  Given that
  we'll call both (see next bullet) later in the boot process it
  didn't matter for normal boot, but I guess this is how L2 cache
  settings got set on 5420/5800 (but not 5250?) at resume time.
* exynos5_set_l2cache_params() was called as part of cache enablement.
  This should happen at boot time (normally in the SPL except for USB
  boot where it happens in main U-Boot).

Note that the old code wasn't setting ECC/parity in the cache
enablement code but we happened to get it anyway because we'd call
secondary_cores_configure() at boot time.  For resume time we'd get it
anyway when the 2nd A15 core came up.

Let's make this a whole lot simpler.  Now we always set these
parameters in the same place for all boots and use the same code for
setting up secondary CPUs.

Intended net effects of this change (other than cleanup):
* Timings go from before:
    data: 0 cycle setup, 3 cycles (0x2) latency
    tag:  0 cycle setup, 3 cycles (0x2) latency
  after:
    data: 1 cycle setup, 4 cycles (0x3) latency
    tag:  1 cycle setup, 4 cycles (0x3) latency
* L2ACTLR is properly initted on 5420/5800 in all cases.

One note is that we're still relying on luck to keep low_power_start()
working.  The compiler is being nice and not storing anything on the
stack.

Another note is that on its own this patch won't help to fix cache
settings in an RW U-Boot update where we still have the RO SPL.  The
plan for that is:
* Have RW U-Boot re-init the cache right before calling the kernel
  (after it has turned the L2 cache off).  This is why the functions
  are in a header file instead of lowlevel_init.c.

* Have the kernel save the L2 cache settings of the boot CPU and apply
  them to all other CPUs.  We get a little lucky here because the old
  code was using "|=" to modify the registers and all of the bits that
  it's setting are also present in the new settings (!).  That means
  that when the 2nd CPU in the A15 cluster comes up it doesn't
  actually mess up the settings of the 1st CPU in the A15 cluster.  An
  alternative option is to have the kernel write its own
  low_power_start() code.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-02-28 18:03:46 +09:00
Akshay Saraswat
cecf2db23b Exynos542x: Fix secondary core booting for thumb
When compiled SPL for Thumb secondary cores failed to boot
at the kernel boot up. Only one core came up out of 4.
This was happening because the code relocated to the
address 0x02073000 by the primary core was an ARM asm
code which was executed by the secondary cores as if it
was a thumb code.
This patch fixes the issue of secondary cores considering
relocated code as Thumb instructions and not ARM instructions
by jumping to the relocated with the help of "bx" ARM instruction.
"bx" instruction changes the 5th bit of CPSR which allows
execution unit to consider the following instructions as ARM
instructions.

Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-02-28 18:03:46 +09:00
Akshay Saraswat
ac0d98cd55 Exynos542x: CPU: Power down all secondary cores
This patch adds code to shutdown secondary cores.
When U-boot comes up, all secondary cores appear powered on,
which is undesirable and causes side effects while
initializing these cores in kernel.

Secondary core power down happens in following steps:

Step-1: After Exynos power-on, primary core starts executing first.
Step-2: In iROM code every core has to check 2 flags i.e.
	addresses 0x02020028 & 0x02020004.
Step-3: Initially 0x02020028 is 0 for all cores and 0x02020004 has a
	jump address for primary core and 0 for all secondary cores.
Step-4: Therefore, primary core follows normal iROM execution and jumps
	to BL1 eventually, whereas all secondary cores enter WFE.
Step-5: When primary core comes into function secondary_cores_configure,
	it puts pointer to function power_down_core into 0x02020004
	and provides DSB and SEV for all cores so that they may come out
	of WFE and jump to power_down_core function.
Step-6: And ultimately because of power_down_core all
	secondary cores shut-down.

Signed-off-by: Kimoon Kim <kimoon.kim@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-02-28 18:03:46 +09:00
Akshay Saraswat
ecdfb4e9d2 Exynos542x: Add and enable get_periph_rate support
We planned to fetch peripheral rate through one generic API per
peripheral. These generic peripheral functions are in turn
expected to fetch apt values from a function refactored as
per SoC versions. This patch adds support for fetching peripheral
rates for Exynos5420 and Exynos5800.

Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-02-13 17:23:06 +09:00
Przemyslaw Marczak
fda0e27bfd exynos5: pinmux: check flag for i2c config
Some versions of Exynos5 supports High-Speed I2C,
on few interfaces, this change allows support this.
The new flag is: PINMUX_FLAG_HS_MODE

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:10:00 -07:00
Sjoerd Simons
a7b99204a0 exynos5420: fix compilation without parade video
Not all exynos 5420 based devices with an LCD also have a parade LVDS
bridge. So make sure compilation doesn't break if CONFIG_LCD is enabled
and CONFIG_VIDEO_PARADE is not.

As a side-effect move the parade functions from the exynos system header
file to its own file.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-22 20:38:27 +09:00
Suriyan Ramasami
6a23c6533c arm: odroid: usb: add support for usb host including ethernet
This change adds support for enabling the USB host features of the board.
This includes the USB3503A hub and the SMC LAN9730 ethernet controller
as well.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-17 19:33:22 +09:00
Suriyan Ramasami
bdba132828 arm: odroid: enable/disable usb host phy for exynos4412
Enable/disable the usb host phy on the odroid U/X2 boards which are based
on the Exynos4412 SOC.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-17 19:33:21 +09:00
Alim Akhtar
061091098a DMC: Exynos5: Enable update mode for DREX controller
As per Exynos5800 UM ver 0.00 section 17.13.2.1
CONCONTROL register bit 3 [update_mode], Exynos5800 does not
support the PHY initiated update. And it is recommanded to
set this field to 1'b1 during initialization. This patch sets this bit.
Applying MC-initiated mode makes DDL tracking ON, that helps in
compensate MIF voltage variation.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-17 19:03:38 +09:00
Akshay Saraswat
aa14b42d53 Exynos5800: Introduce new proid for Exynos5800
This patch intends to add a new proid for Exynos5800 which is a
variant of Exynos5420. Product id for Exynos5800 is 0x5422.
Both Exynos5420 and Exynos5800 are pin to pin compitable. This
gives us an advantage of reusing Exynos5420 clock, pinmux, memory
and other settings.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-17 19:03:38 +09:00
Przemyslaw Marczak
9e306f15c6 exynos4/4x12: gpio: use gpio extra base addresses
This patch adds extra gpio part addresses to exynos4
and exynos4x12_gpio_data arrays, which are required
since the gpio enum lists are linear

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-30 19:56:16 +09:00
Przemyslaw Marczak
92f4dbaf1a exynos4/4x12: cpu: add extra gpio base addresses
After remove the offsets in Exynos4/4x12 gpio enums,
an additional gpio base addresses are required.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-30 19:56:16 +09:00
Simon Glass
b8809e60cd dm: exynos: gpio: Convert to driver model
Convert the exynos GPIO driver to driver model. This implements the generic
GPIO interface but not the extra Exynos-specific functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:36 -06:00
Simon Glass
903fd79564 dm: exynos: Tidy up GPIO headers
The wrong header is being included, thus requiring the code to re-declare
the generic GPIO interface in each GPIO header.

Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:18 -06:00
Ajay Kumar
a99cea0313 exynos5420: add callbacks needed for exynos_fb driver
Add initialization code for peach_pit panel, parade bridge chip,
and backlight.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-05 20:37:07 +09:00
Ajay Kumar
2358fc8ed9 ARM: exynos: Add missing declaration for gpio_direction_input
This patch adds missing declaration for gpio_direction_input
function, thereby helps in resolving compilation warnings.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-05 20:37:07 +09:00
Ajay Kumar
496f0e47e1 arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420
Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420 needed by
exynos video driver.
Also, configure ACLK_400_DISP1 as the parent for MUX_ACLK_400_DISP1_SUB_SEL.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-05 20:37:07 +09:00
Ajay Kumar
f0017175e3 exynos_fb: Remove usage of static defines
Previously, we used to statically assign values for vl_col, vl_row and
vl_bpix using #defines like LCD_XRES, LCD_YRES and LCD_COLOR16.

Introducing the function exynos_lcd_early_init() would take care of this
assignment on the fly by parsing FIMD DT properties, thereby allowing us
to remove LCD_XRES and LCD_YRES from the main config file.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-05 20:37:07 +09:00
Przemyslaw Marczak
4fb4d55a35 arch:exynos: boot mode: add get_boot_mode(), code cleanup
This patch introduces code clean-up for exynos boot mode check.
It includes:
- removal of typedef: boot_mode
- move the boot mode enum to arch-exynos/power.h
- add bootmode for sequence: eMMC 4.4 ch4 / SD ch2
- add new function: get_boot_mode() for OM[5:1] pin check
- update spl boot code

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>

Changes v5:
- exynos: boot mode: add missing bootmode (1st:EMMC 4.4 / 2nd:SD ch2)

Changes v6:
- none

changes v7:
- change boot mode name: BOOT_MODE_MMC to BOOT_MODE_SD
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-05 13:58:49 +09:00
Akshay Saraswat
ed32522fe0 Exynos5420: DMC: Add software read leveling
Sometimes Read DQ and DQS are not in phase. Since, this
phase shift differs from board to board, we need to
calibrate it at DRAM init phase, that's read DQ calibration.
This patch adds SW Read DQ calibration routine to compensate
this skew.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-06-13 17:05:14 +09:00
Doug Anderson
567802bbd6 Exynos: Make sure ps_hold gets set in the SPL
Setting ps_hold ought to be one of the first things we do when we
first boot up. If we wait until the main u-boot runs we won't set it
in time and the PMIC may power us back off.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-31 14:22:20 +09:00
Jaehoon Chung
39c4975622 ARM: exynos: clock: modify the set_mmc_clk for exynos4
Modified the mmc_set_clock for eynos4.
The goal of this patch is that fsys-div register should be reset.
And retore the div-value, not using the value of lowlevel_init.
(For using SDMMC4, this patch is needs)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-16 14:54:26 +09:00
Akshay Saraswat
f6ae1ca058 S5P: Exynos: Add GPIO pin numbering and rename definitions
This patch includes following changes :
* Adds gpio pin numbering support for EXYNOS SOCs.
  To have consistent 0..n-1 GPIO numbering the banks are divided
  into different parts where ever they have holes in them.

* Rename GPIO definitions from GPIO_... to S5P_GPIO_...
  These changes were done to enable cmd_gpio for EXYNOS and
  cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence
  getting a error during compilation.

* Adds support for name to gpio conversion in s5p_gpio to enable
  gpio command EXYNOS SoCs. Function has been added to asm/gpio.h
  to decode the input gpio name to gpio number.
  Example: SMDK5420 # gpio set gpa00

Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-13 15:20:38 +09:00
Albert ARIBAUD
519fdde9e6 Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	arch/arm/cpu/arm926ejs/mxs/Makefile
	include/configs/trats.h
	include/configs/trats2.h
	include/mmc.h
2014-04-08 09:25:08 +02:00
Przemyslaw Marczak
680d8f03ea cpu: exynos4: add ace sha base address
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2014-03-28 15:06:31 -04:00
Piotr Wilczek
8e5e1e6a92 arm:exynos: add common DTS file for exynos 4
This patch adds common dtsi file and config header for all
Exynos 4 based boards.

Patch additionaly adds board specific (weak) functions for
board_early_init_f and board_power_init functions.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-12 19:54:59 +09:00
Piotr Wilczek
3577fe8be9 drivers:mmc:sdhci: enable support for DT
This patch enables support for device tree for sdhci driver.
Non DT case is still supported.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-12 19:54:59 +09:00
Piotr Wilczek
de461c526e video:mipidsim:fdt: Add DT support for mipi dsim driver
This patch enables parsing mipi data from device tree.
Non device tree case is still supported.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-12 19:54:59 +09:00
Tom Rini
c4d376fd1c Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-02-17 14:22:02 -05:00
Rajeshwari S Shinde
d3e016cc28 MMC: DWMMC: Correct the CLKDIV register value
This patch corrects the divider value written to CLKDIV register.
Since SDCLKIN is divided inside controller by the DIVRATIO value set
in the CLKSEL register, we need to use the same output clock value to
calculate the CLKDIV value.
as per user manual: cclk_in = SDCLKIN / (DIVRATIO + 1)

Input parameter to mmc_clk is changed to dwmci_host, since
we need the same to read DWMCI_CLKSEL register.

This improves the read timing values for channel 0 on SMDK5250
from 0.288sec to 0.144sec

Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-02-07 17:42:26 +02:00
Piotr Wilczek
34991bbf47 arm:exynos: add cpu revision
This patch enables to read cpu revision on Exynos CPU.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-02-07 10:06:24 +09:00
Minkyu Kang
1501cc9416 exynos: pinmux: remove unnecessary define
The value of PERIPH_ID_COUNT was wrong, and unnecessary.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-02-05 15:37:56 +09:00
Minkyu Kang
790991b0e1 exynos: pinmux: sort the list of peripherals
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Rajehswari Shinde <rajeshwari.s@samsung.com>
2014-02-05 15:37:55 +09:00
Przemyslaw Marczak
8475c869c3 s5p: gpio: change gpio coding method for s5p gpio.
Old s5p gpio coding method was not clean and was not working properly
for all parts and banks. New method is clean and easy to extend.

Gpio coding mask:
0x000000ff - pin number
0x00ffff00 - bank offset
0xff000000 - part number

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-02-03 15:36:14 +09:00
Inderpal Singh
16f9480dfc usb: ehci: exynos: set/reset hsic phys
The controller has 3 ports. The port0 is for USB 2.0 Phy, port1 and port2
are for HSIC phys. The usb 2.0 phy is already being setup. This patch
sets up the hsic phys.

Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
2014-01-13 12:23:28 +01:00
Rajeshwari Birje
5af4a4f74a Exynos5420: Add support for 5420 in pinmux and gpio
Adds code in pinmux and gpio framework to support Exynos5420.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:34 +09:00
Rajeshwari Birje
f3d7c2fe9d Exynos5420: Add DDR3 initialization for 5420
This patch intends to add DDR3 initialization code for Exynos5420.

Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:34 +09:00
Rajeshwari Birje
060c227a28 Exynos5420: Add clock initialization for 5420
This patch adds code for clock initialization and clock settings
of various IP's and controllers, required for Exynos5420

Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:34 +09:00
Rajeshwari Birje
e89278c933 EXYNOS5420: Add dmc and phy_control register structure
Add dmc and phy_control register structure for 5420.

Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:34 +09:00
Rajeshwari Birje
3e97635764 EXYNOS5420: Add power register structure.
Add structure for power register for Exynos5420

Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:34 +09:00
Rajeshwari Birje
e69847ab8d Exynos5420: Add base addresses for 5420
Adds base addresses of various IPs and controllers required for
Exynos5420.

Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:34 +09:00
Rajeshwari Birje
71ebb33559 EXYNOS5: Create a common board file
Create a common board.c file for all functions which are common across
all EXYNOS5 platforms.

exynos_init function is provided for platform specific code.

Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:34 +09:00
Jaehoon Chung
01322004ec arm: exynos: remove the unused define.
These defines didn't use anywhere.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-05 10:42:04 +09:00
Jaehoon Chung
4bee78f502 arm: exynos/goni: fix the return type for s5p_mmc_init
The "int" type is right.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-05 10:42:04 +09:00
Rajeshwari Shinde
347e45d745 exynos: spl: Add a custom spi copy function
This patch implements a custom spi_copy funtion to copy u-boot from SF
to RAM. This is faster then iROM spi_copy funtion as this runs spi at
50Mhz and also in WORD mode of operation.

Changed a printf in pinmux.c to debug just to avoid the compilation
error in SPL.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-03 15:26:33 +09:00
Minkyu Kang
771b3ba34c arm: exynos: fix the align for exynos4_power structure
res3 should be 4bytes

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Cc: Dominik Klein <dominik.klein@gmx.com>
2013-12-03 09:40:24 +09:00
Rajeshwari Shinde
6f0b7caa67 DWMMC: SMDK5420: Disable SMU for eMMC
SMDK5420 has a new Security Management Unit added
for dwmmc driver, hence, configuring the control
registers to support booting via eMMC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-10-31 09:55:33 +02:00
Vivek Gautam
80c4c5964f arm: exynos: Add methods to control power to USB 3.0 PHY
Adding methods to turn on/off power to USB3.0 type PHY
as and when required by the controller.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Marek Vasut <marex@denx.de>
2013-10-20 23:42:38 +02:00