Commit graph

5 commits

Author SHA1 Message Date
Sourav Poddar
ce3cc8ecf5 ti: qspi: populate slave device to set flash quad bit.
The patch populates the slave data which will be used by flash driver to
set the  flash quad enable bit.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
2014-06-06 17:46:14 -04:00
Poddar, Sourav
b545a98f5d spi: ti_qspi: Add delay for successful bulk erase.
Bulk erase is not happening properly on dra7 due to erase timing constraints,
add a delay so that erase timing constraints are properly met.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Yebio Mesfin <ymesfin@ti.com>
2014-04-17 17:20:18 -04:00
Sourav Poddar
bb7cd0ddf9 spi: ti_qspi: Add delay before xfer for am43xx
Without this delay, write/read is failing.
Looks like, the WIP always remain set and hence a timeout
occurs leading to the error.

Without this patch, device does not get probed also.
Here is the log.

U-Boot#
U-Boot#
U-Boot#
U-Boot# sf probe 0
SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
Failed to initialize SPI flash at 0:0
U-Boot# sf probe 0

While with this patch, log is
U-Boot# sf probe 0
SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB, mapped at 30000000
U-Boot# sf erase 0 0x80000
SF: 524288 bytes @ 0x0 Erased: OK
U-Boot# mw 81000000 0xdededede 0x40000
U-Boot# sf write 81000000 0 0x40000
SF: 262144 bytes @ 0x0 Written: OK
U-Boot# sf read 82000000 0 0x40000
SF: 262144 bytes @ 0x0 Read: OK
U-Boot# md 0x82000000

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-02-18 22:41:09 +05:30
Sourav Poddar
570533b820 spi: ti_qspi: Add AM43xx specifics changes
Add AM43xx specific changes.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-02-18 22:41:09 +05:30
Matt Porter
1d0933eaf9 spi: add TI QSPI driver
Adds a SPI master driver for the TI QSPI peripheral.
- Added quad read support.
- Added memory mapped support.

Signed-off-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:51 +05:30