Commit graph

13 commits

Author SHA1 Message Date
Michal Simek
ce90654d1c xilinx: Sync DTs with Linux kernel
There are several changes which happen in mainline kernel which should get
also to U-Boot. Here is the list of patches from the kernel:

- ARM: zynq: Fix leds subnode name for zc702/zybo-z7
- arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
- arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
- arm64: dts: zynqmp: Wire up the DisplayPort subsystem
- arm64: dts: zynqmp: Add DisplayPort subsystem
- arm64: dts: zynqmp: Add DPDMA node
- arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
- arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
- arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
- arm64: dts: zynqmp-zcu100-revC: correct interrupt flags
- arm64: dts: xilinx: align GPIO hog names with dtschema
- arm64: zynqmp: Add Xilinx AES node
- dt: bindings: dma: xilinx: dpdma: DT bindings for Xilinx DPDMA

but also some other changes have been done.
- Using only one compatible string for adxl345 on zturn
- Remove Xilinx internal DP bindings
- Remove USB3.0 serdes configurations
- Remove SATA serdes configuration for zc1232
- Resort nvmem_firmware
- Update nand compatible string
- Aling power-domains property for sd0/1

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Vignesh Raghavendra
99faf0df04 arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT
Sync DT bindings from kernel DT and move them to out of -u-boot.dtsi
files.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-07-13 20:58:34 +05:30
Vignesh R
ffcc66e8fe dma: ti: add driver to K3 UDMA
The UDMA-P is intended to perform similar (but significantly upgraded) functions
as the packet-oriented DMA used on previous SoC devices. The UDMA-P module
supports the transmission and reception of various packet types.
The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
channels. Channels in the UDMA-P can be configured to be either Packet-Based or
Third-Party channels on a channel by channel basis.

The initial driver supports:
- MEM_TO_MEM (TR mode)
- DEV_TO_MEM (Packet mode)
- MEM_TO_DEV (Packet mode)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-04-11 20:07:12 -04:00
Álvaro Fernández Rojas
6e0faa22dd bmips: bcm6318: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
83eae02462 bmips: bcm63268: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
b2bf5a2243 bmips: bcm6362: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
85132221e2 bmips: bcm6328: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
0417eb5590 bmips: bcm6368: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
487250e6df bmips: bcm6358: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
c225d6619e bmips: bcm6348: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
9ab403d0dd bmips: bcm6338: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Simon Glass
6f9678567a arm: at91: dts: Bring in device tree file for AT91SAM9G45
Add this file from Linux v4.5.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tested-on: smartweb, corvus, taurus, axm
Tested-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12 23:49:38 +02:00
Hans de Goede
53ab4af34e sunxi: dts: Sync all dts files with upstream kernel
Bring all the sunxi dts files (and update existing ones) from
mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any
day now). This is necessary so that we can move all sunxi boards over to
the driver model.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04 16:51:54 +02:00