Commit graph

3 commits

Author SHA1 Message Date
Christophe Kerello
6c36e97be6 mmc: stm32_sdmmc2: increase polling status register delay
MMC commands like MMC_CMD_ALL_SEND_CID or MMC_CMD_SEND_CSD can reach
500 us. This patch increases the polling status register delay to avoid
a timeout on a command.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-16 09:42:51 -04:00
Masahiro Yamada
9b643e312d treewide: replace with error() with pr_err()
U-Boot widely uses error() as a bit noisier variant of printf().

This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:

  # define __compiletime_error(message) __attribute__((error(message)))

This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux.  (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)

Let's convert error() into now treewide-available pr_err().

Done with the help of Coccinelle, excluing tools/ directory.

The semantic patch I used is as follows:

// <smpl>
@@@@
-error
+pr_err
 (...)
// </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04 11:59:44 -04:00
Patrice Chotard
b312c590bc mmc: Add MMC support for stm32h7 Socs
This patch adds SD/MMC support for STM32H7 SoCs.

Here is an extraction of SDMMC main features, embedded in
STM32H7 SoCs.
The SD/MMC block include the following:
 _ Full compliance with MultiMediaCard System Specification
   Version 4.51. Card support for three different databus modes:
   1-bit (default), 4-bit and 8-bit.
 _ Full compatibility with previous versions of MultiMediaCards
   (backward compatibility).
 _ Full compliance with SD memory card specifications version 4.1.
   (SDR104 SDMMC_CK speed limited to maximum allowed IO speed,
    SPI mode and UHS-II mode not supported).
 _ Full compliance with SDIO card specification version 4.0.
   Card support for two different databus modes: 1-bit (default)
   and 4-bit. (SDR104 SDMMC_CK speed limited to maximum allowed IO
   speed, SPI mode and UHS-II mode not supported).
 _ Data transfer up to 208 Mbyte/s for the 8 bit mode.
   (depending maximum allowed IO speed).
 _ Data and command output enable signals to control external
   bidirectional drivers.

The current version of the SDMMC supports only one SD/SDIO/MMC card
at any one time and a stack of MMC Version 4.51 or previous.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-28 20:23:19 +09:00