Commit graph

16 commits

Author SHA1 Message Date
Simon Glass
b6409ec302 dm: x86: Move link to use driver model for video
Update the configuration to use the new driver. Drop the existing plumbing
code and unused header files.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11 11:55:33 +08:00
Simon Glass
0adf8d3548 x86: Add support for running Intel reference code
Intel has invented yet another binary blob which firmware is required to
run. This is run after SDRAM is ready. It is linked to load at a particular
address, typically 0, but is a relocatable ELF so can be moved if required.

Add support for this in the build system. The file should be placed in the
board directory, and called refcode.elf.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Simon Glass
7ac99be6e2 x86: Add an ICH6 pin configuration driver
Add a driver which sets up the pin configuration on x86 devices with an ICH6
(or later) Platform Controller Hub.

The driver is not in the pinctrl uclass due to some oddities of the way x86
devices work:

- The GPIO controller is not present in I/O space until it is set up
- This is done by writing a register in the PCH
- The PCH has a driver which itself uses PCI, another driver
- The pinctrl uclass requires that a pinctrl device be available before any
other device can be probed

It would be possible to work around the limitations by:
- Hard-coding the GPIO address rather than reading it from the PCH
- Using special x86 PCI access to set the GPIO address in the PCH

However it is not clear that this is better, since the pin configuration
driver does not actually provide normal pin configuration services - it
simply sets up all the pins statically when probed. While this remains the
case, it seems better to use a syscon uclass instead. This can be probed
whenever it is needed, without any limitations.

Also add an 'invert' property to support inverting the input.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Simon Glass
342727ace6 x86: cpu: Add functions to return the family and stepping
These two identifiers can be useful for drivers which need to adjust their
behaviour depending on the CPU family or stepping (revision).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:24 +08:00
Simon Glass
25d5352c71 x86: ivybridge: Use syscon for the GMA device
Until we have a proper video uclass we can use syscon to handle the GMA
device, and avoid the special device tree and PCI searching. Update the code
to work this way.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:09:42 +08:00
Simon Glass
98655f3a8d x86: Set up a shared syscon numbering schema
Each system controller can have a number to identify it. It can then be
accessed using syscon_get_by_driver_data(). Put this in a shared header
file and update the only current user.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:09:42 +08:00
Simon Glass
6f92ed8f1a x86: Add a way to call 32-bit code from 64-bit mode
The procedure to drop from 64-bit mode to 32-bit is a bit messy. Add a
function to take care of it. It requires identity-mapped pages and that
the calling code is running below 4GB.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Simon Glass
7dfe8bdeef x86: Add an enum for some commonly-used GDT bits
Rather than add these as open-coded values, create an enum with the commonly
used flags.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Bin Meng
be3f06bcc4 x86: dm: Clean up cpu drivers
This commit does the following to clean up x86 cpu dm drivers:
- Move cpu_x86 driver codes from arch/x86/cpu/cpu.c to a dedicated
  file arch/x86/cpu/cpu_x86.c
- Rename x86_cpu_get_desc() to cpu_x86_get_desc() to keep consistent
  naming with other dm drivers
- Add a new cpu_x86_bind() in the cpu_x86 driver which does exactly
  the same as the one in the intel baytrail cpu driver
- Update intel baytrail cpu driver to use cpu_x86_get_desc() and
  cpu_x86_bind()

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Simon Glass
bcb0c61e1a x86: Allow CPUs to be set up after relocation
This permits init of additional CPU cores after relocation and when driver
model is ready.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-30 16:13:48 -06:00
Simon Glass
837a136fc7 x86: Add an mfence macro
Provide access to this x86 instruction from C code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-29 21:02:34 -06:00
Simon Glass
727c1a9871 x86: Replace fill_processor_name() with cpu_get_name()
This implementation has a 'cpu' prefix and returns a pointer to the string,
avoiding the need for copying.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:12 +01:00
Bin Meng
52f952bf5e x86: Do CPU identification in the early phase
The CPU identification happens in x86_cpu_init_f() and corresponding
fields are saved in the global data for later use.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:10 +01:00
Simon Glass
200182a748 x86: Add support for starting 64-bit kernel
Add code to jump to a 64-bit Linux kernel. We need to set up a flat page
table structure, a new GDT and then go through a few hoops in the right
order.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28 20:43:47 -06:00
Simon Glass
92cc94a1fe x86: Display basic CPU information on boot
Display the type of CPU (x86 or x86_64) when starting up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28 20:42:56 -06:00
Simon Glass
7bddac947d x86: Move paging functions into cpu.c
These functions really don't belong in physmem as they relate to the
cpu. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-28 20:42:51 -06:00