Commit graph

52 commits

Author SHA1 Message Date
Jon Medhurst \(Tixy\)
f225d39d30 vexpress: Check TC2 firmware support before defaulting to nonsec booting
The firmware on TC2 needs to be configured appropriately before booting
in nonsec mode will work as expected, so test for this and fall back to
sec mode if required.

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
2016-08-15 18:46:38 -04:00
Michal Simek
e2f88dfd2d libfdt: Introduce new ARCH_FIXUP_FDT option
Add new Kconfig option to disable arch_fixup_fdt() calls for cases where
U-Boot shouldn't update memory setup in DTB file.
One example of usage of this option is to boot OS with different memory
setup than U-Boot use.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-31 19:37:08 -06:00
Ladislav Michl
431889d6ad spl: zImage support in Falcon mode
Other payload than uImage is currently considered to be raw U-Boot
image. Check also for zImage in Falcon mode.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-07-22 09:53:00 -04:00
Jeffy Chen
f7ee071a22 ARM: bootm: Try to use relocated ramdisk
After boot_ramdisk_high(), ramdisk would be relocated to
initrd_start & initrd_end, so use them instead of rd_start & rd_end.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-21 20:03:59 -07:00
Peng Fan
bc3c89b130 common: bootm: check return value of strict_strtoul
Before continue, check return value of strict_strtoul.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-05 18:22:12 -05:00
Jan Kiszka
104d6fb6cd ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions
CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to
be taken into account additionally. CONFIG_ARMV7_PSCI is only set on
boards that support CONFIG_ARMV7_NONSEC, and it only works on those.

CC: Tang Yuantian <Yuantian.Tang@freescale.com>
CC: York Sun <yorksun@freescale.com>
CC: Steve Rae <srae@broadcom.com>
CC: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13 09:24:13 -07:00
Joe Hershberger
0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
York Sun
dcd468b8f4 armv8/fsl-lsch3: Convert flushing L3 to assembly to avoid using stack
Flushing L3 cache in CCN-504 requries d-cache to be disabled. Using
assembly function to guarantee stack is not used before flushing is
completed. Timeout is needed for simualtor on which CCN-504 is not
implemented. Return value can be checked for timeout situation.

Change bootm.c to disable dcache instead of simply flushing, required
by flushing L3.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-02-24 13:08:46 -08:00
Ian Campbell
97a8196451 ARM: bootm: do not add PSCI to fdt when booting in secure mode.
Commit 8bc347e2ec "ARM: bootm: Allow booting in secure mode on hyp capable
systems" added the capability to select nonsec vs sec mode boot via an
environment var.

There is a subtle gotcha with this functionality, which is that the PSCI nodes
are still created in the fdt (via armv7_update_dt->fdt_psci) even when booting
in secure mode. Which means that if the kernel is PSCI aware then it will fail
to boot because it will try and do PSCI from secure world, which won't work.

This likely didn't get noticed before because the original purpose was to
support booting the legacy linux-sunxi kernels which don't understand PSCI.

To fix expose boot_nonsec (renaming with armv7_ prefix) outside of bootm.c and
use from the virt-dt code.

As well as avoiding the creation of the PSCI nodes we should also avoid
reserving the secure RAM, so do so.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2015-01-05 15:02:03 -05:00
Hans de Goede
8bc347e2ec ARM: bootm: Allow booting in secure mode on hyp capable systems
Older Linux kernels will not properly boot in hyp mode, add support for a
bootm_boot_mode environment variable, which can be set to "sec" or "nonsec"
to force booting in secure or non-secure mode when build with non-sec support.

The default behavior can be selected through CONFIG_ARMV7_BOOT_SEC_DEFAULT,
when this is set booting in secure mode is the default. The default setting
for this Kconfig option is N, preserving the current behavior of booting in
non-secure mode by default when non-secure mode is supported.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
2014-11-24 09:09:52 +01:00
Michal Simek
f888cf5d94 Revert "lib: bootm: add missing include"
This is a MIME GnuPG-signed message.  If you see this text, it means that
your E-mail or Usenet software does not support MIME signed messages.
The Internet standard for MIME PGP messages, RFC 2015, was published in 1996.
To open this message correctly you will need to install E-mail or Usenet
software that supports modern Internet standards.

This reverts commit 1e96220a56.

Remove duplicated vxworks.h header.
The same change was done by
"ARM: prevent compiler warnings from bootm.c"
(sha1: 8d196e52b5)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-11-11 15:48:59 -05:00
Tom Rini
0ce4af99c0 Merge branch 'master' of git://git.denx.de/u-boot-imx 2014-10-27 09:08:42 -04:00
Jeroen Hofstee
1e96220a56 lib: bootm: add missing include
since the vxworks weaks are reimplement make
sure their prototypes are visible.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 15:27:35 -04:00
Eric Nelson
8d196e52b5 ARM: prevent compiler warnings from bootm.c
Without preceding declarations, "make C=1" generates
"Should it be static?" warnings for symbols
	do_bootm_linux,
	boot_prep_vxworks, and
	boot_jump_vxworks

Include of bootm.h also identified a signature mismatch
(const on argv[]).

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-10-21 10:47:13 +02:00
Tom Rini
3f1b6bebe0 arm64: Correct passing of Linux kernel args
The Documentation/arm64/booting.txt document says that pass in x1/x2/x3
as 0 as they are reserved for future use.

Signed-off-by: Tom Rini <trini@ti.com>
2014-08-30 07:46:40 -04:00
Ma Haijun
e29607ed97 ARM: convert arch_fixup_memory_node to a generic FDT fixup function
Some architecture needs extra device tree setup. Instead of adding
yet another hook, convert arch_fixup_memory_node to be a generic
FDT fixup function.

[maz: collapsed 3 patches into one, rewrote commit message]

Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-28 17:19:49 +02:00
Marc Zyngier
f510aeae68 ARM: HYP/non-sec: allow relocation to secure RAM
The current non-sec switching code suffers from one major issue:
it cannot run in secure RAM, as a large part of u-boot still needs
to be run while we're switched to non-secure.

This patch reworks the whole HYP/non-secure strategy by:
- making sure the secure code is the *last* thing u-boot executes
  before entering the payload
- performing an exception return from secure mode directly into
  the payload
- allowing the code to be dynamically relocated to secure RAM
  before switching to non-secure.

This involves quite a bit of horrible code, specially as u-boot
relocation is quite primitive.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-28 17:19:09 +02:00
Marc Zyngier
c19e0dd741 ARM: HYP/non-sec: move switch to non-sec to the last boot phase
Having the switch to non-secure in the "prep" phase is causing
all kind of troubles, as that stage can be called multiple times.

Instead, move the switch to non-secure to the last possible phase,
when there is no turning back anymore.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-28 17:05:59 +02:00
Mela Custodio
91290cf728 bootstage: arm: fix fdt stashing code
The conditional is using a variable that is not defined.

Signed-off-by: Rommel G Custodio <sessyargc+u-boot@gmail.com>
2014-04-07 23:03:13 +02:00
York Sun
88590148fa armv8: Flush dcache before switching to EL2
For ARMv8, U-boot has been running at EL3 with cache and MMU enabled.
Without proper setup for EL2, cache and MMU are both disabled (out of
reset). Before switching, we need to flush the dcache to make sure the
data is in the main memory.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: David.Feng <fenghua@phytium.com.cn>
2014-04-07 22:19:00 +02:00
Tom Rini
7f673c99c2 Merge branch 'master' of git://git.denx.de/u-boot-arm
Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.

Conflicts:
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini <trini@ti.com>
2014-01-10 10:56:00 -05:00
David Feng
0ae7653128 arm64: core support
Relocation code based on a patch by Scott Wood, which is:
Signed-off-by: Scott Wood <scottwood@freescale.com>

Signed-off-by: David Feng <fenghua@phytium.com.cn>
2014-01-09 16:08:44 +01:00
Miao Yan
871a57bb81 common/cmd_bootm: extend do_bootm_vxworks to support the new VxWorks boot interface.
The next version VxWorks adopts device tree (for PowerPC and ARM) as its hardware
description mechanism. For PowerPC, the boot interface conforms to
the ePAPR standard, which is:

   void (*kernel_entry)(ulong fdt_addr,
          ulong r4 /* 0 */,
          ulong r5 /* 0 */,
          ulong r6 /* EPAPR_MAGIC */, ulong r7 /* IMA size */,
          ulong r8 /* 0 */, ulong r9 /* 0 */)

For ARM, the boot interface is:

   void (*kernel_entry)(void *fdt_addr)

Signed-off-by: Miao Yan <miao.yan@windriver.com>
[trini: Fix build error when !CONFIG_OF_FDT is set, typo on PowerPC,
missing extern ft_fixup_num_cores]
Signed-off-by: Tom Rini <trini@ti.com>
2013-12-16 08:59:05 -05:00
Andre Przywara
d429688754 ARM: extend non-secure switch to also go into HYP mode
For the KVM and XEN hypervisors to be usable, we need to enter the
kernel in HYP mode. Now that we already are in non-secure state,
HYP mode switching is within short reach.

While doing the non-secure switch, we have to enable the HVC
instruction and setup the HYP mode HVBAR (while still secure).

The actual switch is done by dropping back from a HYP mode handler
without actually leaving HYP mode, so we introduce a new handler
routine in our new secure exception vector table.

In the assembly switching routine we save and restore the banked LR
and SP registers around the hypercall to do the actual HYP mode
switch.

The C routine first checks whether we are in HYP mode already and
also whether the virtualization extensions are available. It also
checks whether the HYP mode switch was finally successful.
The bootm command part only calls the new function after the
non-secure switch.

Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
2013-10-03 21:28:55 +02:00
Andre Przywara
bb97545565 ARM: trigger non-secure state switch during bootm execution
To actually trigger the non-secure switch we just implemented, call
the switching routine from within the bootm command implementation.
This way we automatically enable this feature without further user
intervention.

Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
2013-10-03 21:28:46 +02:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Simon Glass
a5266d6b5d bootm: Clean up bootz_setup() function
This function has no prototype in the headers and passes void * around, thus
requiring several casts. Tidy this up.

- Add new patch to clean up bootz_setup() function

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-07-10 09:15:14 -04:00
Simon Glass
bce1b92aa1 arm: Implement the 'fake' go command
Implement this feature on ARM for tracing.

It would be nice to have generic bootm support so that it is easily
implemented on any arch.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-06-26 10:18:56 -04:00
Simon Glass
6caa195614 arm: Use image_setup_linux() instead of local code
Use the common FDT setup function that is now available in image. Move
the FDT-specific code to a new bootm-fdt.c and remove unused headers
from bootm.c.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-14 15:37:25 -04:00
Simon Glass
c19d13b030 arm: Refactor bootm to reduce #ifdefs
With fewer #ifdefs the code is more readable and more of the code is
compiled for all boards. Add defines in the header file to control
what features are enabled, and then use if() instead of #ifdef.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-14 15:37:25 -04:00
Kim Phillips
12e06fe03f treewide: include libfdt_env.h before fdt.h
and, if including libfdt.h which includes libfdt_env.h in
the correct order, don't include fdt.h before libfdt.h.

this is needed to get the fdt type definitions set from
the project environment before fdt.h uses them.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
2013-02-07 20:38:55 -05:00
Pali Rohár
89e6f13849 arm bootm: Allow to pass board specified atags
Board can implement function setup_board_tags which is used for adding atags

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
2012-10-30 15:28:05 -07:00
Tom Rini
bd23b22bad Merge branch 'agust@denx.de-next' of git://git.denx.de/u-boot-staging 2012-10-15 13:37:22 -07:00
Joe Hershberger
c6734261ec arm: Add CONFIG_OF_BOARD_SETUP support to bootm
ARM boards need to change device tree settings as well

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-04 16:11:18 +02:00
Rob Herring
fcfa696b3a ARM: increase lmb stack space reservation to 4KB
The bootm initrd image copy to ram can collide with the stack in cases
where the print buffer size is large (i.e. 1K). The result is intermittent
initrd decompression errors depending on the initrd size MOD 4KB since
the initrd start address is 4KB aligned.

Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-10-04 10:25:40 +02:00
Simon Glass
94fd1316b7 bootstage: Store boot timings in device tree
Add an option, CONFIG_BOOTSTAGE_FDT to pass boot timings to the kernel
in the device tree, if available. To use this, you must have
CONFIG_OF_LIBFDT defined.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-02 22:39:33 +02:00
Stephen Warren
9e02a6b8e5 arm: restore fdt_fixup_ethernet call to do_bootm_linux
Commit 0a672d4 "arm: Add Prep subcommand support to bootm" re-organized
do_bootm_linux for ARM. During the re-organization, the call to
fdt_fixup_ethernet() was removed. I assume this was useful, so add it
back.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Tom Rini <trini@ti.com>
2012-04-23 22:11:18 +02:00
Stephen Warren
1723997610 arm: fix bootm with device tree
Commit 0a672d4 "arm: Add Prep subcommand support to bootm" re-organized
do_bootm_linux() for ARM. During the re-organization, the code to pass
the device tree to the kernel was removed. Add it back. This restores
the ability to boot a kernel using device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Allen Martin <amartin@nvidia.com>
Tested-by: Allen Martin <amartin@nvidia.com>
2012-04-23 22:10:41 +02:00
Marek Vasut
44f074c771 BOOT: Add "bootz" command to boot Linux zImage on ARM
This command boots Linux zImage from where the zImage is loaded to. Passing
initrd and fdt is supported.

Tested on i.MX28 based DENX M28EVK
Tested on PXA270 based Voipac PXA270.

NOTE: This currently only supports ARM, but other architectures can be easily
added by defining bootz_setup().

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Warren <TWarren@nvidia.com>
Cc: albert.u.boot@aribaud.net
Cc: afleming@gmail.com,
Cc: Simon Glass <sjg@chromium.org>,
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2012-03-30 22:58:55 +02:00
Simon Schwarz
0a672d494d arm: Add Prep subcommand support to bootm
Adds prep subcommand to bootm implementation of ARM. When bootm is called
with the subcommand prep the function stops right after ATAGS creation and
before announce_and_cleanup.

This is used in command "cmd_spl export"

Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-03-27 22:05:29 +02:00
Simon Glass
f933e84e34 bootstage: arm: Add bootstage calls in board and bootm
Add calls to bootstage before and after relocation, and just
before jumping to the OS.

The idea here is you can call bootstage_report() to get a report.
Additionally, if you define CONFIG_BOOTSTAGE_REPORT then a report is
printed automatically by U-Boot just before jumping to the kernel.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 21:43:17 +01:00
Simon Glass
770605e4f9 bootstage: Replace show_boot_progress/error() with bootstage_...()
These calls should not be made directly any more, since bootstage
will call the show_boot_...() functions as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 21:41:39 +01:00
Simon Glass
578ac1e9ba bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()
This changes the number 15 as used in boot_stage_progress() to use the
new name provided for it. This is a separate patch because it touches
so many files.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-18 20:45:57 +01:00
Heiko Schocher
3ea11cacdd arm, fdt: update ethernet mac address before booting Linux
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Gerald van Baren <gvb.uboot@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
2011-12-19 17:52:44 +01:00
Grant Likely
55b0a39314 Respect memreserve regions specified in the device tree
If a regions is reserved in the fdt, then it should not be used.  Add
the memreserve regions to the lmb so that u-boot doesn't use them to
store the initrd.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
2011-04-25 21:11:21 -04:00
Grant Likely
590d3cacb9 Stop passing around bootmem_base value.
For the calls to boot_relocate_fdt(), boot_get_cmdline(), and
boot_get_kbd(), the value of bootmem_base is always obtained by
calling getenv_bootm_low().  Since the value always comes from the
same source, the calling signature for those functions can be
simplified by making them call getenv_bootm_low() directly.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
2011-04-25 21:11:19 -04:00
Po-Yu Chuang
3a8a83e08d arm: get_sp() should always be compiled
get_sp() was incorrectly excluded if none of
  CONFIG_SETUP_MEMORY_TAGS
  CONFIG_CMDLINE_TAG
  CONFIG_INITRD_TAG
  CONFIG_SERIAL_TAG
  CONFIG_REVISION_TAG
were defined.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2011-02-21 08:30:55 +01:00
Heiko Schocher
1336cad298 arm, bootm: Fix compile warning
Fix warning:

bootm.c: In function 'bootm_linux_fdt':
bootm.c:181: warning: unused variable 's'
bootm.c:180: warning: unused variable 'bd'

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-10-26 21:15:35 +02:00
John Rigby
2d1916e48b ARM: add flat device tree support
Based on other architectures already supported.
Tested on OMAP3 Beagle board and another unnamed ARM platform.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Tested-by: Rob Herring <rob.herring@smooth-stone.com>
Acked-by: Wolfgang Denk <wd@denx.de>
2010-10-18 22:54:00 +02:00
Wolfgang Denk
54841ab50c Make sure that argv[] argument pointers are not modified.
The hush shell dynamically allocates (and re-allocates) memory for the
argument strings in the "char *argv[]" argument vector passed to
commands.  Any code that modifies these pointers will cause serious
corruption of the malloc data structures and crash U-Boot, so make
sure the compiler can check that no such modifications are being done
by changing the code into "char * const argv[]".

This modification is the result of debugging a strange crash caused
after adding a new command, which used the following argument
processing code which has been working perfectly fine in all Unix
systems since version 6 - but not so in U-Boot:

int main (int argc, char **argv)
{
	while (--argc > 0 && **++argv == '-') {
/* ====> */	while (*++*argv) {
			switch (**argv) {
			case 'd':
				debug++;
				break;
			...
			default:
				usage ();
			}
		}
	}
	...
}

The line marked "====>" will corrupt the malloc data structures and
usually cause U-Boot to crash when the next command gets executed by
the shell.  With the modification, the compiler will prevent this with
an
	error: increment of read-only location '*argv'

N.B.: The code above can be trivially rewritten like this:

	while (--argc > 0 && **++argv == '-') {
		char *arg = *argv;
		while (*++arg) {
			switch (*arg) {
			...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-07-04 23:55:42 +02:00