Commit graph

31 commits

Author SHA1 Message Date
Stefan Agner
249092fa81 imx: imx-common: print i.MX 7 SoC names consistently
According to the product website, the full names are i.MX 7Solo
and i.MX 7Dual, whereas the short form is i.MX7S and i.MX7D. Be
consistent and print the short form for both supported i.MX 7 SoCs.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-05-17 17:52:20 +02:00
Fabio Estevam
e25a0656ba mx7: Distinguish between dual and solo versions
Read the number of cores in the fuses to distinguish between
the dual and solo versions.

Tested on a mx7d sabresd and on a mx7solo warp7.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-03-09 12:50:39 +01:00
Peng Fan
623787fd58 imx: imx-common: power down lcdif before boot os
Need to call lcdif_power_down to make lcdif in initial state
before kernel boot. Similar issue for uboot reset with lcdif
enabled, system will hang after serveral times resetting. Need
to let lcdif initial state to make all go well.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2015-11-12 17:40:54 +01:00
Fabio Estevam
3a384b494c imx-common: cpu: Do not print on invalid temperature
It is not very useful to have the message below on every boot
(especially when we are using early silicon):

U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300)

CPU:   Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C)CPU:   Thermal invalid data, fuse: 0x0
 - invalid sensor device

, so turn the error message into debug level.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-09-13 10:50:55 +02:00
Adrian Alonso
cd562c8d07 imx: imx7d: add imx-common cpu support for imx7d
Add imx-common cpu support for imx7d SoC
- Update reset_cause for imx7d
- Enable watchdog driver built for imx7d

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-13 10:11:54 +02:00
Adrian Alonso
1368f99346 thermal: imx_thermal: rework driver to be reused
Rework imx_thermal driver to be used across i.MX
processor that support thermal sensor

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-13 10:11:53 +02:00
Peng Fan
8631c06e9b imx: mx6ul: Add i.MX6UL CPU type
Add MXC_CPU_MX6UL for i.MX6UL CPU type which is got at runtime from
DIGPROG register. But the value has been occupied by MXC_CPU_MX6D which
is not real id from DIGPROG register, so change i.MX6D to value 0x67 which
was not occupied.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
2015-08-02 11:05:06 +02:00
Peng Fan
d0acd99334 imx: add cpu type for i.MX6QP/DP
Add cpu type for i.MX6QP/DP.

This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP
and MXC_CPU_MX6DP, we should use:
(is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)).

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-08-02 10:42:48 +02:00
Stefano Babic
943a3f2ccb imx: drop warning: unused variable 'max_freq'
max_freq in print_cpuinfo is used only with
imx6.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-06-08 08:55:08 +02:00
Stefano Babic
8649b405c5 Revert "imx: drop warning: unused variable 'max_freq'"
This reverts commit a0117a5e41.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-05-28 12:01:44 +02:00
Stefano Babic
a0117a5e41 imx: drop warning: unused variable 'max_freq'
max_freq in print_cpuinfo is used only with
imx6.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-05-27 11:10:15 +02:00
Tim Harvey
70caa8e21d imx: mx6: add display of CPU temperature grade in print_cpuinfo()
When CONFIG_IMX6_THERMAL is defined print the CPU temperature grade info
along with the current temperature.

Before:
 CPU:   Temperature 42 C

After:
 CPU:   Automotive temperature grade (-40C to 125C) at 42C
 CPU:   Industrial temperature grade (-40C to 105C) at 42C
 CPU:   Extended Commercial temperature grade (-20C to 105C) at 42C

Cc: Stefan Roese <sr@denx.de>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Cc: Jason Liu <r64343@freescale.com>
Cc: Ye Li <b37916@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Peng Fan <b51431@freescale.com>
Tested-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:31:46 +02:00
Tim Harvey
b83ddac805 imx: mx6: display max cpu frequency in print_cpuinfo()
Display the max CPU frequency as well as the current running CPU frequency
if the max CPU frequency is available and differs from the current CPU
frequency.

Before:
CPU:   Freescale i.MX6Q rev1.2 at 792 MHz

After - using an 800MHz IMX6DL (running at its max)
CPU:   Freescale i.MX6DL rev1.1 at 792 MHz

After - using a 1GHz IMX6Q (not running at its max):
CPU:   Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)

Cc: Stefan Roese <sr@denx.de>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Cc: Jason Liu <r64343@freescale.com>
Cc: Ye Li <b37916@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Peng Fan <b51431@freescale.com>
Tested-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:31:31 +02:00
Prabhakar Kushwaha
28420e780a arm/imx-common: Fix warning 'get_reset_cause' defined but not used
Fix below warning
arch/arm/imx-common/cpu.c:29:14: warning: ‘get_reset_cause’ defined but
not used
 static char *get_reset_cause(void)

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-05-19 15:13:51 +02:00
Eric Nelson
11c2e505c4 ARM: i.MX: provide access to reset cause through get_imx_reset_cause()
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2015-02-17 10:42:54 +01:00
Soeren Moch
dd1c8f1b5f sata: fix reset_sata for dwc_ahsata
- fix crash when sata device is not initialized
- remove disable_sata_clock() since it is not clear which clock for which
  device should be disabled here
- call disable_sata_clock() for mx6 in preboot_os instead

Signed-off-by: Soeren Moch <smoch@web.de>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
2014-12-01 10:20:19 +01:00
Nikita Kiryanov
44b9841d78 arm: imx: stop sata on boot
Ideally, the Linux kernel should get the hardware in its most
untouched state. For the most part, U-Boot does not reset the various
subsystems it touches before boot, and usually Linux deals with it, but
on some boards (cm_fx6) the Linux kernel fails to detect the ssd
correctly if sata is used by U-Boot.

Power off sata on OS boot so that Linux will have a clean state to work
with.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
2014-11-24 12:10:08 +01:00
Ye.Li
7a26416847 mx6: thermal: Check cpu temperature via thermal sensor
Add imx6 thermal device to mx6 soc file. Read the cpu temperature
using this device to access onchip thermal sensor.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
2014-11-21 15:30:12 +01:00
Fabio Estevam
32c81ea65c imx: consolidate set_chipselect_size function
Move MX5 specific set_chipselect_size function into generic i.MX part,
such that MX6 based boards are able to use this function as well.

While doing this the iomuxc gpr member needed to be consolidated between
MX5 and MX6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-20 10:30:19 +01:00
Jeroen Hofstee
5624c6bd4e imx: add missing includes
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 15:27:35 -04:00
Marek Vasut
fcfdfdd58c ARM: mx6: Prevent overflow in DRAM size detection
The MX6 DRAM controller can be configured to handle 4GiB of DRAM, but
only 3840 MiB of that can be really used. In case the controller is
configured to operate a 4GiB module, the imx_ddr_size() function will
correctly compute that there is 4GiB of DRAM in the system. Firstly,
the return value is 32-bit, so the function will effectively return
zero. Secondly, the MX6 cannot address the full 4GiB, but only 3840MiB
of all that. Thus, clamp the returned size to 3840MiB in such case.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:21:57 +02:00
Fabio Estevam
05d54b827f mx6: Add support for the mx6solox variant
mx6solox is the newest member of the mx6 family.

Some of the new features on this variants are:
- Cortex M4 microcontroller (besides the CortexA9)
- Dual Gigabit Ethernet

Add the initial support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-07-10 15:29:16 +02:00
Tim Harvey
b07161c321 imx: add comments and remove unused struct fields
Add comment block for the imx_ddr_size function and remove the extra unused
fields from struct esd_mmdc_regs which are also not common between IMX53 and
IMX6.

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2014-06-06 10:07:25 +02:00
Fabio Estevam
94db665579 mx6: Distinguish mx6dual from mx6quad
Currently when we boot a mx6dual U-boot reports that it is a mx6quad.

Report it as MX6D instead:

CPU:   Freescale i.MX6D rev1.2 at 792 MHz

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano babic <sbabic@denx.de>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2014-02-11 11:24:12 +01:00
Eric Nelson
3e9cbbbb2b imx-common: remove extraneous semicolon from macro
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-11-27 09:39:21 +01:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Troy Kisky
abbab70363 mx31/mx35/mx51/mx53/mx6: add watchdog
Use a common watchdog driver for all these cpus.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-01-13 11:39:57 +01:00
Troy Kisky
eb0344d974 imx-common: cpu: add imx_ddr_size
Read memory setup registers to determine size
of available ram. This routine works for mx53/mx6x

I need this because when mx6solo called get_ram_size
with a too large maximum size, the system hanged.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-11-10 08:15:40 +01:00
Troy Kisky
20332a066a mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
Previously, the same value was returned for both mx6dl and mx6solo.
Check number of processors to differeniate.
Also, a freescale patch says that sololite has its cpu/rev
stored at 0x280 instead of 0x260.
I don't have a sololite to verify.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-11-10 08:15:40 +01:00
Eric Nelson
e1eb75b535 i.MX: shut down video before launch of O/S
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2012-09-24 10:48:58 +02:00
Stefano Babic
ea00e59be0 MX: set a common place to share code for Freescale i.MX
Up now only MX5 and MX6 can share code, because they have
a common source directory in cpu/armv7. Other not armv7
i.MX can profit of the same shared code. Move these files
into a directory accessible for all, similar to plat-mxc
in linux.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-09-10 14:24:29 +02:00
Renamed from arch/arm/cpu/armv7/imx-common/cpu.c (Browse further)