Commit graph

15 commits

Author SHA1 Message Date
Tom Rini
2738f0edea Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next
K3 J721E:
* OSPI boot support
* Support for loading remote cores in R5 SPL
* PMIC ESM Support
* Minor fixes for R5F and C7x remoteproc drivers

K3 AM654:
* Update AVS class 0 voltages.
* Add I2C nodes

DRA7xx/AM57xx:
* Fixed Android boot on AM57xx

AM33/AM43/Davinci:
* switch to driver model for the net and mdio driver for baltos
* Add DM/DTS support for omap video driver
* Enable fastboot on am335x-evm
2020-03-17 11:59:58 -04:00
Lokesh Vutla
6e44aebdbb arm: mach-k3: Add a separate function for printing sysfw version
Add a separate function for printing sysfw version so that it can be
called independently of k3_sysfw_loader.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-11 08:56:49 +05:30
Faiz Abbas
d45ffb7937 arm: K3: sysfw-loader: Add a config_pm_pre_callback()
System firmware does not guarantee that clocks going out of the device
will be stable during power management configuration. There are some
DCRC errors when SPL tries to get the next stage during eMMC boot after
sysfw pm configuration.

Therefore add a config_pm_pre_callback() to switch off the eMMC clock
before power management and restart it after it is done.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09 08:33:16 +08:00
Keerthy
3ab34bc028 arm: k3: Add support for loading non linux remote cores
Add MAIN domain R5FSS0 remoteproc support from spl. This enables
loading the elf firmware in SPL and starting the remotecore.

In order to start the core, there should be a file with path
"/lib/firmware/j7-main-r5f0_0-fw" under filesystem
of respective boot mode.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[Guard start_non_linux_remote_cores under CONFIG_FS_LOADER]
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2020-03-03 13:08:14 +05:30
Andrew F. Davis
ea70da142c arm: K3: Disable ROM configured firewalls
ROM configures certain firewalls based on its usage, which includes
the one in front of boot peripherals. In specific case of boot
peripherals, ROM does not open up the full address space corresponding
to the peripherals. Like in OSPI, ROM only configures the firewall region
for 32 bit address space and mark 64bit address space flash regions
as in-accessible.

When security-cfg is initialized by sysfw, all the non-configured
firewalls are kept in bypass state using a global setting. Since ROM
configured firewalls for certain peripherals, these will not be touched.
So when bootloader touches any of the address space that ROM marked as
in-accessible, system raises a firewall exception causing boot hang.

It would have been ideal if sysfw cleans up the ROM configured boot
peripheral firewalls. Given the memory overhead to store this
information provided by ROM and the boot time increase in re configuring
the firewalls, it is concluded to clean this up in bootloaders.

So disable all the firewalls that ROM doesn't open up the full address
space.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Venkateswara Rao Mandela <venkat.mandela@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Andreas Dannenberg
643eb6ea07 board: ti: j721e: Use EEPROM-based board detection
The TI J721E EVM system on module (SOM), the common processor board, and
the associated daughtercards have on-board I2C-based EEPROMs containing
board config data. Use the board detection infrastructure to do the
following:

1) Parse the J721E SOM EEPROM and populate items like board name, board
   HW and SW revision as well as board serial number into the TI common
   EEPROM data structure residing in SRAM scratch space
2) Check for presence of daughter card(s) by probing associated I2C
   addresses used for on-board EEPROMs containing daughter card-specific
   data. If such a card is found, parse the EEPROM data such as for
   additional Ethernet MAC addresses and populate those into U-Boot
   accordingly
3) Dynamically apply daughter card DTB overlays to the U-Boot (proper)
   DTB during SPL execution
4) Dynamically create an U-Boot ENV variable called name_overlays
   during U-Boot execution containing a list of daugherboard-specific
   DTB overlays based on daughercards found to be used during Kernel
   boot.

This patch adds support for the J721E system on module boards containing
the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS),
the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet
Expansion Board ("J7X-VSC8514-ETH"), the infotainment board
("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial
expansion board ("J7X-GESI-EXP").

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Lokesh Vutla
40109f4d7e arm: mach-k3: Enable WA for R5F deadlock
On K3 devices there are 2 conditions where R5F can deadlock:
1.When software is performing series of store operations to
  cacheable write back/write allocate memory region and later
  on software execute barrier operation (DSB or DMB). R5F may
  hang at the barrier instruction.
2.When software is performing a mix of load and store operations
  within a tight loop and store operations are all writing to
  cacheable write back/write allocates memory regions, R5F may
  hang at one of the load instruction.

To avoid the above two conditions disable linefill optimization
inside Cortex R5F which will make R5F to only issue up to 2 cache
line fills at any point of time.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-03 09:47:11 -05:00
Keerthy
7b13493088 arm: mach-k3: j721e_init: Initialize avs class 0
Initialize avs class 0

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Lokesh Vutla
22b548044b armv7R: K3: j721e: Add support for triggering ddr init from SPL
In SPL, DDR should be made available by the end of board_init_f()
so that apis in board_init_r() can use ddr. Adding support for
triggering DDR initialization from board_init_f().

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25 17:33:21 -04:00
Andreas Dannenberg
9d1303b38b armv7R: K3: j721e: Load SYSFW binary and config from boot media
Use the System Firmware (SYSFW) loader framework to load and start
the SYSFW as part of the J721E early initialization sequence. While
at it also initialize the MCU_UART0 pinmux as it is used by SYSFW
to print diagnostic messages.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:27 -04:00
Lokesh Vutla
9c0ff866b3 armv7R: K3: j721e: Shut down R5 core after ATF startup on A72
Populate the release_resources_for_core_shutdown() api with
shutting down r5 cores so that it will by called just after
jumping to ATF.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:26 -04:00
Andreas Dannenberg
f94a07c8a1 armv7R: K3: j721e: Store boot index from ROM
Obtain the boot index as left behind by the device boot ROM and store
it in scratch pad SRAM for later use before it may get overwritten.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26 21:49:26 -04:00
Andreas Dannenberg
b73fcbced9 armv7R: K3: j721e: Unlock all applicable control MMR registers
To access various control MMR functionality the registers need to
be unlocked. Do that for all control MMR regions in the MCU and MAIN
domains. We may want to go back later and limit the unlocking that's
being done.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26 21:49:26 -04:00
Lokesh Vutla
0a704924f3 armv7R: K3: j721e: Add support for boot device detection
J721E allows for booting from primary or backup boot media.
Both media can be chosen individually based on switch settings.
ROM looks for a valid image in primary boot media, if not found
then looks in backup boot media. In order to pass this boot media
information to boot loader, ROM stores a value at a particular
address. Add support for reading this information and determining
the boot media correctly.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26 21:49:26 -04:00
Lokesh Vutla
c2562d7c9e arm: K3: j721e: Add basic support for J721E SoC definition
The J721E SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration to enable lower system costs
of automotive applications such as infotainment, cluster, premium
Audio, Gateway, industrial and a range of broad market applications.
This SoC is designed around reducing the system cost by eliminating
the need of an external system MCU and is targeted towards ASIL-B/C
certification/requirements in addition to allowing complex software
and system use-cases.

Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, three clusters of lockstep
  capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA),
  C7x floating point Vector DSP, Two C66x floating point DSPs.
* 3D GPU PowerVR Rogue 8XE GE8430
* Vision Processing Accelerator (VPAC) with image signal processor and Depth
  and Motion Processing Accelerator (DMPAC)
* Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual
  PRUs and dual RTUs
* Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and
  up to two DPI interfaces.
* Integrated Ethernet switch supporting up to a total of 8 external ports in
  addition to legacy Ethernet switch of up to 2 ports.
* System MMU (SMMU) Version 3.0 and advanced virtualisation
  capabilities.
* Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems,
  16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI,
  I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals.
* Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
  management.
* Configurable L3 Cache and IO-coherent architecture with high data throughput
  capable distributed DMA architecture under NAVSS
* Centralized System Controller for Security, Power, and Resource
  Management (DMSC)

See J721E Technical Reference Manual (SPRUIL1, May 2019)
for further details: http://www.ti.com/lit/pdf/spruil1

Add base support for J721E SoC

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2019-07-26 21:49:25 -04:00