Commit graph

16 commits

Author SHA1 Message Date
Rob Herring
5a20397b00 mmc: remove the MMC_MODE_HC flag
High capacity support is not a host capability, but a device capability
that is queried via the OCR. The flag in the operating conditions
request argument can just be set unconditionally. This matches the Linux
implementation.

[panto] Hand merged and renumbering MMC_MODE_DDR_52MHz.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
2015-05-05 12:29:36 +03:00
Matt Reimer
8ebde4f0b3 mmc: s5p: properly mask SELBASECLK
Properly mask SELBASECLK by using an actual mask rather than the
number of bits to shift in order to create the mask.

Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-03-18 09:51:56 +02:00
Simon Glass
0347960b87 dm: mmc: Remove use of fdtdec GPIO support
These functions are going away, so use the new uclass support instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:52 -07:00
Przemyslaw Marczak
3f3c13a513 mmc: s5p: set SD detection pin as input
The SD Card slot detection pin should be configured as input.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27 19:20:51 -06:00
Simon Glass
7f1961018c dm: exynos: Make sure that GPIOs are requested
With driver model GPIOs must be requested before use. Make sure this is
done correctly.

(Note that the soft SPI part of universal is omitted, since this driver
is about to be replaced with a driver-model-aware version)

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:33 -06:00
Simon Glass
311757be27 samsung: Enable device tree for s5p_goni
Change this board to add a device tree.

This also adds a pinmux header file although it is not used as yet.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-08 17:25:47 +09:00
Jaehoon Chung
9b8c9a3c09 mmc: s5p_sdhci: add the s5p_sdhci_core_init function
To reuse the code, added the s5p_sdhci_core_init function.
Before applied this patch, didn't use the 8-bit mode at exynos baord.
Because it didn't set "MMC_MODE_8BIT".

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-16 14:54:26 +09:00
Piotr Wilczek
3577fe8be9 drivers:mmc:sdhci: enable support for DT
This patch enables support for device tree for sdhci driver.
Non DT case is still supported.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-12 19:54:59 +09:00
Jaehoon Chung
113e5dfcd7 mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoC
Samsung SoC is supported the WIDE8, even if Controller version is v2.0.
So add the SDHCI_QUIRK_USE_WIDE8 for Samsung-SoC.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-17 20:03:43 +03:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Jaehoon Chung
a68aac4947 mmc: sdhci: return error when failed add_sdhci().
If failed the add_host(), it is reasonable that return value of
add_sdhci().

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-06 16:26:24 -05:00
Tushar Behera
13243f2eaf mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
MMC host controller requires a delay between every sdhci_send_cmd()
execution. In s5p_mmc driver (s5p_sdhci replaces this driver), a delay
of 1000us was provided after every mmc_send_cmd() call. Adding a quirk
in current sdhci driver to replicate the behaviour.

Without this delay, MMC initialization on Origen board fails with
following error messages.

Timeout for status update!
mmc fail to send stop cmd

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 02:53:36 -05:00
Jaehoon Chung
b09ed6e4fe mmc: s5p_sdhci: add the set_mmc_clk for cmu control
Samsung SoC use the cmu control to set clock.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-09-05 17:33:26 -05:00
Jaehoon Chung
8458e0283f mmc: s5p_sdhci: fixed wrong function argument
Useless code is removed, and get buswidth value.
buswidth value will be used to choice the 4bit or 8bit.
(Now used 4bit mode in sdhci.c by default)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-09-05 17:33:26 -05:00
Jaehoon Chung
b268660ced mmc: s5p_sdhci: set the SDHCI_QUIRK_BROKEN_R1B
Samsung SoC is broken busy waiting for R1b type.
And clk delay control value is modified the previosuly value.
(that value used at the s5p_mmc.c)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-09-05 17:33:26 -05:00
Jaehoon Chung
442d55685e mmc: support the sdhci instead of s5p_mmc for samsung-soc
In driver mmc, generic s5p_sdhci code is implemented.
s5p_mmc file  is dupulicated.
we are good that use the generic sdhci.
This patch supported the sdhci  for Samsung-SoC.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Lei Wen<leiwen@marvell.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2012-05-08 18:02:22 -05:00