Commit graph

28 commits

Author SHA1 Message Date
Lokesh Vutla
e497876343 arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
Sync all AM65 related v5.11-rc6 Linux kernel dts into U-Boot.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-04 20:37:57 +05:30
Faiz Abbas
2121c7e2d5 arm: dts: k3-am65: Fix mmc nodes
Because of fundamental interface issues in am65x pg1, only the
initial sdhci1 node at 25 MHz was added in the u-boot.dtsi
from which both the base-board.dts and r5-base-board.dts
inherit the node. Move the node out to k3-am65-main.dtsi
where it belongs and add the board specific properties
in base-board.dts and r5-base-board.dts

This ensures dts compatibility with the kernel dts in the
base-board.dts and enables the SD card interface at 50 MHz
and High Speed mode

While we are here, also fix the main_mmc0_pins_default
property to be included and inherit from the base-board.dts
instead of the u-boot.dtsi

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-02-04 20:37:57 +05:30
Aswath Govindraju
62be2367f5 arm: dts: am654-base-board-uboot: Add aliases for USB subsystems
The sequence number assigned for USB subsystem in a uclass is dependent on
the order of occurrence in the device tree. If the dr_mode of USB3SS0
controller is varied then the sequence number of USB3SS1 controller also
changes. If aliases are added then sequence numbers are assigned using the
alias number. This makes the sequence number of USB3SS1 controller
independent of USB3SS0 controller's dr_mode.

Therefore, add aliases to fix the sequence number assigned to the USB
subsystems.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-01-12 10:21:40 +05:30
Aswath Govindraju
d3af9e3772 arm: dts: am654-base-board-uboot: Set USB0 dr_mode to host
USB3SS0 controller is to be used as a host in U-boot. Fix it by changing
the dr_mode to host.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-01-12 10:21:40 +05:30
Faiz Abbas
c20aee3e28 arm: dts: k3-am654-base-board: Add support for USB0 in SPL
Add nodes for USB0 in SPL to enable USB host boot mode

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Dave Gerlach
bec8b94e08 arm: dts: k3-am65-wakeup: Introduce chipid node
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3
SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Tom Rini
7208396bbf Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"
This reverts commit 5d3a21df66, reversing
changes made to 56d37f1c56.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 08:42:06 -04:00
Dave Gerlach
30402cadb3 arm: dts: k3-am65-wakeup: Introduce chipid node
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3
SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20 11:37:47 -06:00
Vignesh Raghavendra
3f09ebfbde arm: dts: k3-am65: Sync CPSW DT node from kernel
Sync CPSW DT node from kernel and move it out of -u-boot.dtsi file.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13 20:58:34 +05:30
Vignesh Raghavendra
99faf0df04 arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT
Sync DT bindings from kernel DT and move them to out of -u-boot.dtsi
files.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-07-13 20:58:34 +05:30
Tom Rini
2738f0edea Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next
K3 J721E:
* OSPI boot support
* Support for loading remote cores in R5 SPL
* PMIC ESM Support
* Minor fixes for R5F and C7x remoteproc drivers

K3 AM654:
* Update AVS class 0 voltages.
* Add I2C nodes

DRA7xx/AM57xx:
* Fixed Android boot on AM57xx

AM33/AM43/Davinci:
* switch to driver model for the net and mdio driver for baltos
* Add DM/DTS support for omap video driver
* Enable fastboot on am335x-evm
2020-03-17 11:59:58 -04:00
Faiz Abbas
c7d106b4eb mmc: am654_sdhci: Update output tap delay writes
With the latest RIOT, there is a different otap delay value for each
speed mode. Add a new binding with every supported speed mode. Also
disable a given speed mode in the host caps if its corresponding
otap-del-sel is not present.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09 08:33:16 +08:00
Vignesh Raghavendra
9e9dfc1fc4 ARM: dts: k3-am65: Add OSPI DT nodes
Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support
OSPI boot.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-03 13:08:13 +05:30
Vignesh Raghavendra
60120071da arm: dts: k3-am654-base-board: enable USB1
Add pinmux for USB1 and enable it as a peripheral port in U-Boot
specific dtsi since U-Boot does not support OTG.
Disable USB0 as its not available on the baseboard.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:29 +05:30
Faiz Abbas
fe0e30c7ba mmc: am654_sdhci: Get Xin clock by name
Get clk_xin by name instead of by index to avoid having to put clocks in
the same order in all devices.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Grygorii Strashko
5efb69298b arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid
The AM654 SoC doesn't allow to disabling RGMII TX internal delay in CPSW2G
MAC. Hence, change CPSW2G interface mode to "rgmii-rxid" - RGMII with
internal RX delay provided by the PHY, the MAC will add an TX delay in this
case.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09 09:47:42 -06:00
Suman Anna
dcddf0fd83 arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains property
The commit 355be915ed ("arm: dts: k3-am654: Update power-domains
property for each node") has updated the power-domain cells value
and updated power-domains property in various existing dts nodes but
missed updating the cpsw_nuss node. This results in the following
build warning, fix this.

arch/arm/dts/k3-am654-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2
arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2

Fixes: 355be915ed ("arm: dts: k3-am654: Update power-domains property for each node")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-31 13:08:07 -04:00
Lokesh Vutla
355be915ed arm: dts: k3-am654: Update power-domains property for each node
Update the power-domain-cells to 2 and add the permissions
to each node. Mark the following nodes accessed by r5 as shared:
- DDR node
- main uart 0

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:23 -04:00
Andreas Dannenberg
7e0363b285 arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages
To enable the use of an EEPROM-based board detection scheme we need to
be able to access the I2C bus associated with the EEPROMs across all
3 stages of U-Boot: R5 SPL, A53 SPL, and A53 U-Boot (proper). So go
ahead and add/update the wkup_i2c0 peripheral module DTS definitions
and its associated pinmux node accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
9bbdfdf209 arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi
Only U-Boot specifc DT properties or overrides, must be in -u-boot.dtsi.
Pinctrl nodes does not belong here. Now that pinctrl nodes are in kernel
DT, there is no reason to be keep these in -u-boot.dtsi. Move them to
proper places so that it would ease copying DT entries from kernel DT.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:12:54 -04:00
Faiz Abbas
bbcfaad59f arm: dts: k3: Add phy specific properties to SD card node
With changes in the driver requiring phy related properties,
add the same for the SD card node to prevent breaking boot with
the driver update.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
3a1a0dfc39 arm64: dts: k3: Sync sdhci0 node from kernel and change driver name
Sync the sdhci0 node from kernel. This changes the compatible that is
required to be there in the driver. Change the same for the SD card node
which is not yet supported in kernel. This also syncs the main_pmx0 node
as a side effect.

Also change the name of the driver to match the compatible in kernel.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Grygorii Strashko
6f2929d8b7 arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Add mcu cpsw nuss pinmux and phy defs required by cpsw.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15 13:32:26 -05:00
Grygorii Strashko
5195c10fbb arm64: dts: ti: k3-am65: add mcu cpsw node
Add mcu cpsw and its components along with scm_conf node
to have ethernet functional.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15 13:32:25 -05:00
Andreas Dannenberg
7202af927b arm: dts: k3-am654: Sync IOPAD macros with Linux
Transition to the IOPAD macros as used in Linux in which the pin mux
mode is specified using a dedicated parameter while also dropping the
related MUX_MODEx macros that are no longer needed. This transition
will allow us to keep both Linux and U-Boot DTS in sync more easily.
While at it also align the file name of the include file itself and
update any references accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03 07:30:31 -04:00
Grygorii Strashko
736b6c3f87 arm64: dts: ti: k3-am65: add mcu navss nodes
Add DT node for MCU NAVSS its components to get DMA working on AM654
SoC.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-11 20:07:12 -04:00
Lokesh Vutla
2d0eba3a45 arm: dts: k3: Sync dts from Linux
Sync the k3-am654 specific dts files from Linux next with tag
20181019. This changes are in queue for Linux v4.20-rc1

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-11-16 16:51:59 -05:00
Lokesh Vutla
853f7f5018 arm64: dts: k3: Add u-boot specific nodes
Add the minimum dt nodes required to boot. These nodes
will get deleted as kernel gets these nodes added in the
main dts files.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00