Commit graph

11859 commits

Author SHA1 Message Date
Tom Rini
560eeee8c2 block: Migrate SystemACE chip to Kconfig
Migrate the base and sub-options to Kconfig.  Note that we only enable
this in the base sandbox config now.

Cc: Alexey Brodkin <alexey.brodkin@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Is this driver still used anywhere?  It's fishy that it's only enabled
in sandbox anymore.
2018-02-08 19:08:41 -05:00
Adam Ford
a5a37567c4 Convert CONFIG LIB_HW_RAND to Kconfig
config_fallbacks.h had some logic to automatically select
LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't
already selected.  By migrating LIB_HW_RAND to Kconfig, we can
remove this check from config_fallbacks.h and put it into Kconfig

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
[trini: Turn into a choice, add NET_RANDOM_ETHADDR]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08 12:48:22 -05:00
Adam Ford
99bec1aead Convert CONFIG_APBH_DMA et al to Kconfig
This converts the following to Kconfig:
   CONFIG_APBH_DMA
   CONFIG_APBH_DMA_BURST
   CONFIG_APBH_DMA_BURST8

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
[trini: Add in MMC as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08 12:48:11 -05:00
Patrice Chotard
4c82b03c12 configs: stm32: Enable CONFIG_ENV_VARS_UBOOT_CONFIG
Enable CONFIG_ENV_VARS_UBOOT_CONFIG for all STM32 boards
It allows to retrieve the SoC name into the "soc" environment
variable.

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-02-08 10:17:17 -05:00
Stefan Agner
c87c81186c Convert CONFIG_NAND_MXS to Kconfig
This converts CONFIG_NAND_MXS to Kconfig.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08 10:17:17 -05:00
Stefan Agner
25c5b4e1bf arm: imx: mx28: Move MX28 selection to Kconfig
The motivation for moving MX28 selection to Kconfig is to be able
to better handle NAND MXS selection through Kconfig.

This selection method also aligns with the way other i.MX SoCs are
selected in U-Boot.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08 10:17:17 -05:00
Stefan Agner
c5343d4e11 arm: imx: mx23: Move MX23 selection to Kconfig
The motivation for moving MX23 selection to Kconfig is to be able
to better handle NAND MXS selection through Kconfig.

This selection method also aligns with the way other i.MX SoCs are
selected in U-Boot.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08 10:17:16 -05:00
Adam Ford
8bbff6a70e Convert CONFIG_MXC_GPIO to Kconfig
This converts the following to Kconfig:
   CONFIG_MXC_GPIO

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08 10:17:16 -05:00
Adam Ford
f1754f0810 configs: imx6q_logic: Move CONFIG_PHY_SMSC to defconfig
Since CONFIG_PHY_SMSC was already in Kconfig, move this from
header file to defconfig

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08 10:16:54 -05:00
Adam Ford
71abe5ac00 configs: imx6q_logic: Move CONFIG_MXC_UART to Kconfig
Since CONFIG_MXC_UART is already in Kconfig, move this from
the header to imx6q_logic_defconfig

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-08 07:27:52 -05:00
Derald D. Woods
cbebe7a0f5 ARM: omap3: evm: Remove CONFIG_SYS_NS16550_REG_SIZE undefine
This commit removes an attempt to workaround a previous compilation
warning that is is now fixed in "include/configs/ti_omap3_common.h".

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-07 22:06:19 -05:00
Derald D. Woods
313ed5d505 ARM: omap3: ti_omap3_common: Fix CONFIG_SYS_NS16550_REG_SIZE compiler warning
This commit fixes the following compiler warnings when DM_SERIAL is
enabled.

---8<-------------------------------------------------------------------
...

  CC      spl/board/ti/evm/evm.o
In file included from /solution/scm/u-boot-master/board/ti/evm/evm.c:16:0:
/solution/scm/u-boot-master/include/ns16550.h:31:0: warning: "CONFIG_SYS_NS16550_REG_SIZE" redefined
 #define CONFIG_SYS_NS16550_REG_SIZE (-1)

In file included from /solution/scm/u-boot-master/include/configs/omap3_evm.h:22:0,
                 from include/config.h:5,
                 from /solution/scm/u-boot-master/include/common.h:21,
                 from /solution/scm/u-boot-master/board/ti/evm/evm.c:14:
/solution/scm/u-boot-master/include/configs/ti_omap3_common.h:33:0: note: this is the location of the previous definition
 # define CONFIG_SYS_NS16550_REG_SIZE (-4)

  LD      spl/board/ti/evm/built-in.o

...

  CC      spl/drivers/serial/ns16550.o
In file included from /solution/scm/u-boot-master/drivers/serial/ns16550.c:11:0:
/solution/scm/u-boot-master/include/ns16550.h:31:0: warning: "CONFIG_SYS_NS16550_REG_SIZE" redefined
 #define CONFIG_SYS_NS16550_REG_SIZE (-1)

In file included from /solution/scm/u-boot-master/include/configs/omap3_evm.h:22:0,
                 from include/config.h:5,
                 from /solution/scm/u-boot-master/include/common.h:21,
                 from /solution/scm/u-boot-master/drivers/serial/ns16550.c:7:
/solution/scm/u-boot-master/include/configs/ti_omap3_common.h:33:0: note: this is the location of the previous definition
 # define CONFIG_SYS_NS16550_REG_SIZE (-4)

  LD      spl/drivers/serial/built-in.o

...
---8<-------------------------------------------------------------------

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-07 22:06:18 -05:00
Tuomas Tynkkynen
86c2f1e75b fpga: Resync various CONFIG_FPGA_* symbols
These are declared in Kconfig, but some #defines have crept in.

CONFIG_FPGA
CONFIG_FPGA_ALTERA
CONFIG_FPGA_CYCLON2
CONFIG_FPGA_SOCFPGA
CONFIG_FPGA_XILINX
CONFIG_FPGA_ZYNQMPPL

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-02-05 20:58:11 -05:00
Fabio Estevam
11f3090532 mx6sabresd: Select CONFIG_CMD_USB_MASS_STORAGE
Select CONFIG_CMD_USB_MASS_STORAGE so that the 'ums' can be used.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04 12:14:04 +01:00
Fabio Estevam
e705e2cd5b mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGE
Selecting CONFIG_USB_FUNCTION_MASS_STORAGE=y in the defconfig leads to
the following error:

cmd/built-in.o: In function `do_usb_mass_storage':
cmd/usb_mass_storage.c:217: undefined reference to `fsg_main_thread'
cmd/usb_mass_storage.c:170: undefined reference to `fsg_init'

CONFIG_USB_FUNCTION_MASS_STORAGE option is built only for
the non-SPL case as per the logic in drivers/usb/gadget/Makefile,
so remove the incorrect CONFIG_SPL ifdefery to fix the build
failure.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-04 12:02:35 +01:00
Eric Nelson
d8acc9deec mx6memcal: fix comment in board header file
The board header file included a reference to the starting point
from nitrogen6x.h, but since so much changed, the file bears
little resemblance to that file.

Signed-off-by: Eric Nelson <eric@nelint.com>
2018-02-04 12:00:58 +01:00
Eric Nelson
0093b3fcd8 mx6memcal: enable SDP support
The initial implementation of mx6memcal reset the CPU after
running the memory calibration procedure because the generic
board has no information about which boot devices are available.

Now that we have SDP support in SPL, use it to allow a full
U-Boot to be uploaded (i.e. to use "mtest").

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04 12:00:58 +01:00
Nandor Han
886678fcf7 board,ge,bx50v3 - rtc time validation
Validate the time at startup:
 - in case rtc error add to kernel command line RTC_ERROR
 - clamp date to 1-Jan-2036

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Ian Ray
9e41b54a2e configs: ge_bx50v3: automatic partition selection and video output failure message
The exact definition of a successful boot is defined by user-space.
Determine the boot partition automatically.  A partition is selected if
file `/boot/bootcause/firstboot' exists (meaning that the partition has
freshly installed software) OR if file `/boot/fitImage' exists.

When userspace determines that new software was successfully installed,
it must (1) delete `/boot/fitImage' on the _inactive_ partition and (2)
remove `/boot/bootcause/firstboot'.

Enable video, but do not display logos or other version information.
Silence kernel console logging by default.

Print a message to VGA screen in case of boot failure and reset bootcount
to allow the user to attempt boot again.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Hannu Lounento
f41a45830b board: ge: bx50v3: mount rootfs read-only
Change the kernel command line to mount the root filesystem read-only in
order to be able to run filesystem check on it on boot.

Signed-off-by: Hannu Lounento <hannu.lounento@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Ian Ray
44395c8504 configs: ge_bx50v3: enable bootcount
Enable bootcount using an EXT file.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Ian Ray
78ca33508d config: ge_bx50v3: read boot script
Read boot script from shared partition, if available.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Ian Ray
f07b3148d7 board: ge: bx50v3: Support FIT and select configuration based on VPD
Modify configuration to support FIT. Set variable `confidx' from VPD,
in order to load the correct device tree. Modify/simplify U-Boot
environment to support loading FIT image.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Martyn Welch
6d6564957c board: ge: bx50v3: Enable hardware watchdog
Enable the hardware watchdog on bx50v3 to cause it to reset in the event
the board hangs.

Configure GPIO_9 pin as WDOG1_B so that a watchdog timeout results in a
full system reset.

The watchdog is used and reconfigured by systemd approximately 1.7 seconds
into boot. Adding a few seconds for U-Boot and a few more seconds as a
safety margin.

Note that the PCIe controller is _not_ put back into a safe state prior
to board reset.  This is a problem if board reset is implemented as CPU
reset.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Martyn Welch
cf678b31ac board: ge: bx50v3: move FEC MAC address programming to driver
Instead of programming the hardware directly in the board
implementation, follow the flow documented in doc/README.enetaddr: set
the enet[0-9]*addr environment variable and let the driver program the
hardware.

This avoids duplicating the implementation as it already exists in the
driver (drivers/net/fec_mxc.c: fec_set_hwaddr).

The mapping from the driver's index to the environment variable's name
is documented in README: Note for Redundant Ethernet Interfaces. It is
assumed that eth_devices for the controllers on the board are always
indexed in the same order, i.e. FEC always has the index 2.

The FEC driver does *not* set the flag Set MAC Address on Transmit (bit
set_eth0_mac_address used to do but this is unnecessary as the Linux
networking stack fills in the MAC address.

Signed-off-by: Hannu Lounento <hannu.lounento@ge.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Ian Ray
3414913c24 configs: Add network device support for bx50v3 products
Modify b450v3, b650v3 and b850v3 defconfigs to enable the network devices
found in these products.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Martyn Welch
87da89e803 board: ge: Enable access to i2c bus 1 and 2
The change in i2c configuration added to support access to the VPD has
inadvertantly caused access to i2c buses 1 & 2 to be lost. This has
resulted in the configuration for the PMIC to be attempted on the wrong
bus and thus isn't taking effect.

Add the required configuration to return access to buses 1 & 2. In order
to ensure that any users of the bus numbering prior to addition in VPD
patches work, add buses before configuration related to mux on bus 0 and
tweak VPD bus usage to fit new numbering scheme.

Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
Jagan Teki
c282eae07c configs: enable spl support wrt env device
nand device needed for mmc config to access nand
for write and update so enabling SPL_SUPPORT to mmc
or nand is wrt to env device rather nand driver check.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-02-04 12:00:58 +01:00
Anson Huang
0ec3d98f76 mx7_common: use psci 1.0 instead of 0.1
Use PSCI 1.0 instead of 0.1 to support more power
management feature like system reset, power off etc..

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-02-04 12:00:58 +01:00
Lukasz Majewski
4f60e5d3a8 Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
This commit moves USB_FUNCTION_MASS_STORAGE config to Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-02 07:13:48 -05:00
Lukasz Majewski
c6c1ca100f Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig
This commit moves USB_FUNCTION_THOR config to Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-02 07:13:48 -05:00
Tom Rini
ab21ecef7a Xilinx changes for v2018.03
- Several Kconfig fixes (also moving configs to defconfigs)
 - Some DTS updates
 - ZynqMP psu rework based on Zynq concept
 - Add low level initialization for zc770 and zcu102
 - Add support for Zynq zc770 x16 nand configuration
 - Add mini nand/emmc ZynqMP targets
 - Some arasan nand changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlpxesoACgkQykllyylKDCFwngCfZfk2S+c9uJCLh1drA7a+J4Ch
 G+MAnA/iRu6/Ihd5UMe4tMK8BU51h0GQ
 =Ylul
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.03' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.03

- Several Kconfig fixes (also moving configs to defconfigs)
- Some DTS updates
- ZynqMP psu rework based on Zynq concept
- Add low level initialization for zc770 and zcu102
- Add support for Zynq zc770 x16 nand configuration
- Add mini nand/emmc ZynqMP targets
- Some arasan nand changes
2018-01-31 07:10:55 -05:00
Adam Ford
11d2e98d7e Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_OMAP24_I2C_SLAVE
   CONFIG_SYS_OMAP24_I2C_SPEED

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
2018-01-30 14:59:32 -05:00
Adam Ford
76e22222d3 Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_DV_CLKMODE
   CONFIG_SYS_DA850_PLL0_POSTDIV
   CONFIG_SYS_DA850_PLL0_PLLDIV1
   CONFIG_SYS_DA850_PLL0_PLLDIV2
   CONFIG_SYS_DA850_PLL0_PLLDIV3
   CONFIG_SYS_DA850_PLL0_PLLDIV4
   CONFIG_SYS_DA850_PLL0_PLLDIV5
   CONFIG_SYS_DA850_PLL0_PLLDIV6
   CONFIG_SYS_DA850_PLL0_PLLDIV7
   CONFIG_SYS_DA850_PLL1_POSTDIV
   CONFIG_SYS_DA850_PLL1_PLLDIV1
   CONFIG_SYS_DA850_PLL1_PLLDIV2
   CONFIG_SYS_DA850_PLL1_PLLDIV3

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-30 12:52:57 -05:00
Vipul Kumar
aae7422b45 arm64: zynqmp: Moved ethernet PHY configs of ZynqMP boards to defconfig
This patch moved ethernet PHY configs of ZynqMP boards
to respective defconfig.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:52 +01:00
Vipul Kumar
bd5a8e5850 microblaze: Moved ethernet PHY configs of Microblaze board to defconfig
This patch moved ethernet PHY configs of Microblaze board to
respective defconfig.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:52 +01:00
Vipul Kumar
77217c4b5f arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfig
This patch moved ethernet PHY configs of Zynq boards
to respective defconfig.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:48 +01:00
Michal Simek
3e1b61de58 arm: zynq: Update years in copyright to reflect latest changes
Updating year in zynq files. Also add missing Copyright to board.c.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:32 +01:00
Michal Simek
88f05a926d arm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INIT_ENABLED
Remove SPL_BUILD dependency from zynqmp.c and move it to header file.
Use only one symbol for including psu_init.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:12 +01:00
Ezequiel Garcia
d55c8159bd nand: arasan: Select CONFIG_SYS_NAND_SELF_INIT
The Arasan NFC driver requires the self-init mode,
so it should select it.

Instead of having the config header define the macro,
it's cleaner to select the option at the Kconfig level.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:07 +01:00
Siva Durga Prasad Paladugu
2678059ec8 xilinx: zynqmp: Add new target with only emmc enabled
This patch adds new target which is called as mini configuration
with only emmc functionality and other required basic features enabled.
This will be used to run in system with small footprint and needs
emmc support.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:07 +01:00
Siva Durga Prasad Paladugu
c8a6bade5b xilinx: zynqmp: Add new target with only nand enabled
This patch adds new target which is called as mini configuration
with only nand functionality and other required basic features enabled.
This will be used to run in system with small footprint and needs
nand support.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:07 +01:00
Michal Simek
83144cd336 arm: zynq: Move bootcommand to defconfig
It will cleanup generic config and enable option to change it for every
board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:28:45 +01:00
Heinrich Schuchardt
368e86d983 configs: x86: allow to override CONFIG_BOOTCOMMAND
Allow to override CONFIG_BOOTCOMMAND in .config.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-01-30 14:29:07 +08:00
Patrice Chotard
a70c05f10a board: stm32: Fix stm32f746-disco boot
Since 'commit af2f44267 ("fdc spl: use different BOARD_INIT MACRO for spl and tpl")'
board stm32f746-disco can't boot.

The macro CONFIG_IS_ENABLED() can't evaluate the value of
CONFIG_SPL_BOARD_INIT as it was defined in include/configs/stm32f746-disco.h
without attributed value.

Moving CONFIG_SPL_BOARD_INIT from stm32f746-disco.h to mach-stm32/Kconfig
fixes this issue.

Fixes: af2f44267 ("fdc spl: use different BOARD_INIT MACRO for spl and tpl")
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-29 12:48:30 -05:00
Alexander Graf
fa4875942a bcm2835_mu_serial: Convert to Kconfig
Setting config options using headers is deprecated. This patch converts
the BCM2835 Mini-UART to Kconfig.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:36 -05:00
Alexander Graf
cf2c7784bd pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig
We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.

This round goes to pl01x.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:35 -05:00
Alexander Graf
d10fc50f78 pl011: Convert CONFIG_PL011_SERIAL to Kconfig
We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.

This round goes to pl011.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:35 -05:00
Alexander Graf
884f901368 pl010: Convert CONFIG_PL010_SERIAL to Kconfig
We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.

This round goes to pl010.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:35 -05:00
Alexander Graf
71fc2e1459 rpi: Determine PL011/Mini-UART availability at runtime
Firmware on the Raspberry Pi family of devices can dynamically configure either
the PL011, Mini-UART or no device at all to be routed to the user accessible
UART pins.

That means we need to always include both drivers, because we can never be sure
which of the two serial devices firmware actually chooses to use.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:33 -05:00
Felix Brack
85ab0452fe arm: add support for PDU001
This patch adds support for the PDU001 board.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-28 12:27:32 -05:00
Derald D. Woods
56d1dded62 ARM: omap3: evm: Fix distro bootcmd UBIFS and MMC support
The omap3_evm board does not boot when commit:
    a47ca2cf67 ("ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4")
is applied after commit:
    3dde8f2037 ("Merge git://git.denx.de/u-boot-mmc")

This commit reduces the CONFIG_EXTRA_ENV_SETTINGS size and better
leverages the existing distro bootcmd infrastructure.

- Use updated UBIFS support from config_distro_bootcmd.h
- Use LEGACY_MMC naming found in am335x_evm.h and ti_omap4_common.h
- Remove extra environment content that is no longer needed

[MMC(0:1)/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-evm-mmc-fat
label omap3-evm-mmc-fat
	kernel /zImage
	fdt /omap3-evm.dtb
	append console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
---8<-------------------------------------------------------------------

[MMC(0:2)/boot/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-evm-mmc-ext4
label omap3-evm-mmc-ext4
	kernel /boot/zImage
	fdt /boot/omap3-evm.dtb
	append console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
---8<-------------------------------------------------------------------

[NAND(ubi0:rootfs)/boot/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-evm-nand-ubifs
label omap3-evm-nand-ubifs
	kernel /boot/zImage
	fdt /boot/omap3-evm.dtb
	append console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=rootfs noinitrd rootfstype=ubifs rootwait
---8<-------------------------------------------------------------------

Fixes: a47ca2cf67 ("ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4")
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-28 12:27:30 -05:00
Faiz Abbas
ded509b44c configs: Replace CONFIG_ISW_ENTRY_ADDR with CONFIG_SYS_TEXT_BASE
Since 7e0ed13 ("Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to
Kconfig"), a default SYS_TEXT_BASE was set for all ARCH_OMAP2PLUS devices.
CONFIG_ISW_ENTRY_ADDR is used to set SYS_TEXT_BASE in qspi boot.

Simplify this by directly assigning SYS_TEXT_BASE in the defconfig.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-01-28 09:39:15 -05:00
Patrice Chotard
e23b19f4a8 board: stm32: Add stm32f429-evaluation board support
Add stm32f429-evaluation board support.
For more information, please visit:
http://www.st.com/en/evaluation-tools/stm32429i-eval.html

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28 09:39:05 -05:00
Patrice Chotard
09b9f649d0 configs: stm32f: Remove STM32_HSE_HZ for all STM32F series
As clk_stm32f driver is able to retrieve HSE frequency from DT,
CONFIG_STM32_HSE_HZ becomes useless.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28 09:39:05 -05:00
Tom Rini
9c486e7cb0 Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh 2018-01-27 18:25:00 -05:00
Tom Rini
d61639e39a Merge git://git.denx.de/u-boot-socfpga 2018-01-27 14:48:41 -05:00
Marek Vasut
789edf694c ARM: rmobile: Convert R8A7791 Porter board to DM and DT
Convert the R8A7791 Porter board to DM and DT. This implies mostly
enabling the necessary configuration options and plucking out the
ad-hoc configuration from the board file. Moreover, the pre-reloc
malloc size was increased to allow the clock driver to start up
early without running out of malloc space and the early stack was
moved further up in the DRAM to avoid rewriting U-Boot itself.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-27 20:38:54 +01:00
Tom Rini
748277c415 Merge git://git.denx.de/u-boot-sunxi 2018-01-26 13:22:40 -05:00
Maxime Ripard
9921966408 sunxi: Add limit with the MMC environment
The MMC environment offset is getting very close to the end of the U-Boot
binary now. Since we want to make sure this will not overflow, add a size
limit in the board for arm64. arm32 has already that limit enforced in our
custom image generation.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-26 20:02:33 +05:30
Tom Rini
fc04bd84b3 Merge git://git.denx.de/u-boot-mips 2018-01-26 07:46:47 -05:00
Tom Rini
1d12a7c8cd Merge git://git.denx.de/u-boot-spi 2018-01-26 07:46:34 -05:00
Álvaro Fernández Rojas
664ec31db7 MIPS: add BMIPS Comtrend AR-5315u board
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-26 12:38:13 +01:00
Álvaro Fernández Rojas
3483f28ebf MIPS: add support for Broadcom MIPS BCM6318 SoC family
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-26 12:38:13 +01:00
Álvaro Fernández Rojas
c320b923f5 MIPS: add BMIPS Comtrend WAP-5813n board
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-26 12:35:22 +01:00
Álvaro Fernández Rojas
43b7ab99ec MIPS: add support for Broadcom MIPS BCM6368 SoC family
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-26 12:35:22 +01:00
Simon Goldschmidt
1c7fa79314 arm: socfpga: allow configs without network support
Currently, socfpga_common.h does not allow configurations without
network support. This is because CONFIG_CMD_PXE is defined in this
file and distro mode has DHCP hard-coded as available.

Fix this by moving CONFIG_CMD_PXE and CONFIG_MENU to the defconfigs
and by making DHCP optional in BOOT_TARGET_DEVICES(func).

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
2018-01-25 09:59:37 +01:00
Marek Vasut
b606e1bbc3 ARM: rmobile: Convert CONFIG_R8A77xx to Kconfig
Convert these configuration options to Kconfig, update board defconfigs
and drop them from whitelist.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24 23:27:21 +01:00
Vignesh R
a743e2ba38 Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible"
This reverts commit 57897c13de.

Using bounce_buf.c to handle non-DMA alignment problems is bad as
bounce_buf.c does cache manipulations which is not required. Therefore
revert this patch in favour of local bounce buffer solution in the next
patch.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Reviewed-by: Jason Rush <jarush@gmail.com>
Acked-by: Jason Rush <jarush@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24 12:11:36 +05:30
Jason Rush
5a15ec19c8 config: cadence_spi: Remove defines read from DT
Cleanup unused #define values that are read from the DT.

Tested on TI K2G platform:
Tested-by: Vignesh R <vigneshr@ti.com>

Tested on a socfpga-cyclonev board:
Tested-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>

Signed-off-by: Jason Rush <jarush@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Acked-by: Marek Vasut <marex@denx.de>
2018-01-24 12:07:50 +05:30
Tom Rini
1612128018 Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-23 21:48:53 -05:00
Ashish Kumar
6c8945ec41 armv8: ls1088a: Add IFC and eMMC as qixis boot sources
Add macro QIXIS_LBMAP_EMMC, QIXIS_LBMAP_IFC, QIXIS_RCW_SRC_IFC,
QIXIS_RCW_SRC_EMMC to enable IFC and eMMC as boot sources for
qixis commands.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
[YS: Modify subject and add commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:26:21 -08:00
Rajesh Bhagat
ef0789b7c6 ls1088a: Add VID support for QDS and RDB platforms
This patch adds the support for VID on LS1088AQDS and LS1088ARDB systems.
It reads the fusesr register and changes the VDD accordingly by adjusting
the voltage via LTC3882 regulator.

This patch also takes care of the special case of 0.9V VDD is present in
fusesr register. In that case,it also changes the SERDES voltage by
disabling the SERDES, changing the SVDD and then re-enabling SERDES.

Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:20:53 -08:00
Rajesh Bhagat
23a12cb3d0 board: common: vid: Add support for LTC3882 voltage regulator chip
Restructures common driver to support LTC3882 voltage regulator
chip.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:19:56 -08:00
Adam Ford
6aa4ad8e38 Convert CONFIG_SOC_DA8XX et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SOC_DA8XX
   CONFIG_SOC_DA850
   CONFIG_DA850_LOWLEVEL
   CONFIG_MACH_DAVINCI_DA850_EVM
   CONFIG_SYS_DA850_PLL_INIT
   CONFIG_SYS_DA850_DDR_INIT

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: David Lechner <david@lechnology.com>
[trini: Rework CONFIG_SYS_DA850_PLL_INIT so it's selected on SOC_DA8XX]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-22 20:09:26 -05:00
Tuomas Tynkkynen
8bad6cb176 fs: fat: Drop CONFIG_SUPPORT_VFAT
fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since
2003), so as a result VFAT support is always enabled regardless of
whether a board config defines it or not. Drop this unnecessary option.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:31 -05:00
Tuomas Tynkkynen
f1698a8cf5 ARM: poplar: Use Kconfig to enable CONFIG_FAT_WRITE
The symbol's been converted to Kconfig for a while, poplar is the only
one #defining it.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:31 -05:00
Tuomas Tynkkynen
3d22bae57f fs: Migrate ext4 to Kconfig
Migrate the following symbols to Kconfig:

CONFIG_FS_EXT4
CONFIG_EXT4_WRITE

The definitions in config_fallbacks.h can now be expressed in Kconfig.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:30 -05:00
Adam Ford
6574864df8 Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_ROCKCHIP_USB2_PHY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
b9b500b0f9 Convert CONFIG_OMAP_USB_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_OMAP_USB_PHY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
3b9e2a2520 Convert CONFIG_TWL4030_USB to Kconfig
This converts the following to Kconfig:
   CONFIG_TWL4030_USB

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
26410c1517 Convert CONFIG_DAVINCI_SPI to Kconfig
This converts the following to Kconfig:
   CONFIG_DAVINCI_SPI

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
e13a9dc370 Convert CONFIG_USB_MUSB_HCD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MUSB_HCD
   CONFIG_USB_MUSB_UDC
   CONFIG_USB_DAVINCI
   CONFIG_USB_OMAP3
   CONFIG_USB_DA8XX
   CONFIG_USB_AM35X

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:29 -05:00
Adam Ford
86362221fc Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MUSB_OMAP2PLUS
   CONFIG_USB_MUSB_AM35X
   CONFIG_USB_MUSB_DSPS
   CONFIG_USB_MUSB_PIO_ONLY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:29 -05:00
Tom Rini
c4cb6e64bf Merge git://git.denx.de/u-boot-arc 2018-01-19 16:07:36 -05:00
Faiz Abbas
e8b9fdced6 configs: keystone2: env: Fix burn_uboot_spi command
Now the u-boot spi image is greater than 0x90000, increase the same in
env during spi erase.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:33 -05:00
Tuomas Tynkkynen
7dd97af523 powerpc: Drop unreferenced CONFIG_* defines
The following config symbols are only defined once and never referenced
anywhere else:

CONFIG_CYRUS
CONFIG_IDS8313
CONFIG_MPC8308_P1M
CONFIG_MPC8308RDB
CONFIG_MPC8349EMDS
CONFIG_MPC8349ITXGP
CONFIG_SBC8349
CONFIG_SBC8548
CONFIG_SBC8641D
CONFIG_TQM834X
CONFIG_VE8313
CONFIG_XPEDITE5140
CONFIG_XPEDITE5200
CONFIG_XPEDITE550X

Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Acked-by: Mario Six <mario.six@gdsys.cc>
2018-01-19 15:49:32 -05:00
Tuomas Tynkkynen
e6e5ecc5e2 m68k: Drop unreferenced CONFIG_* defines
The following config symbols are only defined once and never referenced
anywhere else:

CONFIG_AMCORE
CONFIG_ASTRO5373L
CONFIG_M52277EVB
CONFIG_M5253DEMO
CONFIG_M5253EVBE
CONFIG_M5275EVB
CONFIG_M54418TWR
CONFIG_STMARK2

Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-19 15:49:32 -05:00
Tuomas Tynkkynen
557017386b nds32: Drop unreferenced CONFIG_ADP_AG101P
Seems to be again one of those CONFIG_ symbols named after a board, with
nothing referencing it.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-19 15:49:31 -05:00
Derald D. Woods
a47ca2cf67 ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4
This commit adds UBIFS_NAND to BOOT_TARGET_DEVICES. This will
allow the kernel zImage to be loaded from '/boot/zImage' in UBIFS
(ubi0:rootfs).

Additionally update the *_MMC devices to also load kernel image from
the MMC 0:2 EXT4 file system.

DISTRO_DEFAULTS Setup

=====================

[primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot
[fallback 1] Check MMC 0:2 /boot/zImage and run mmcbootz
[fallback 2] Check MMC 0:2 /boot/uImage and run mmcboot
[fallback 3] Check NAND UBIFS /boot/zImage and run nandbootubifs
[fallback 4] Check NAND partitions and run nandboot

The following "extlinux.conf" can be used to load images in the
top-level of the MMC 0:1 FAT partition.

[MMC(0:1)/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-evm
label omap3-evm
	kernel /zImage
	fdt /omap3-evm.dtb
	append console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
---8<-------------------------------------------------------------------

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-19 15:49:30 -05:00
Adam Ford
3cf0061ab5 DA850evm: Remove dead code
There is an #ifdef and #endif with nothing in between.  This patch simply
removes this dead/useless code.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-19 15:49:28 -05:00
Derald D. Woods
4b37928d35 ARM: dts: omap3-beagle{-xm}: Enable DM and devicetree for BeagleBoard
This commit updates the configuration files needed to support OF_CONTROL
on the OMAP3 BeagleBoard(s).
2018-01-19 15:49:28 -05:00
Rex Chang
4849d95407 board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support
Added support for K2G EVM with FlipChip SoC of which
ARM/DDR3 runs at 1GHz/1066 MT/s. The patch is also
backward compatible with old revision EVM and EVM
with WireBond SoC. Their ARM/DDR3 run at 600MHz/800 MT/s.

The new SoC supports 2 different speeds at 1GHz and 600MHz.
Modyfied the CPU Name to show which SoC is used in the EVM.
Modified the DDR3 configuration to reflect New SoC supports
2 different CPU and DDR3 speeds, 1GHz/1066MT and 600MHz/800MT.

Added new inline function board_it_k2g_g1() for the new FlipChip 1GHz,
and set the u-boot env variable board_name accordingly.

Modified findfdt script in u-boot environment variable to include new k2g board type.

Signed-off-by: Rex Chang <rchang@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19 15:49:24 -05:00
Lokesh Vutla
19f3feaed1 configs: k2g_evm: Allocate more space for u-boot
Now that we have multi dtb enabled in u-boot allocate
128K space for u-boot.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19 15:49:24 -05:00
Alexey Brodkin
8f44e1ee79 ARC: devboards: Allow huge uImages (up to 128 MiB)
Even though in production uImage usually is quite small as
it contains just Linux kernel image during development it might
be pretty convenient to have root-FS built into the same image.

That makes uImage much larger but given on our dev platforms we have
quite a lot of DDR (> 512 MiB) we may afford loading huge uImages.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:35 +03:00
Tom Rini
086ebcd40e Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-17 13:48:35 -05:00
Ashish Kumar
2eb2dbd457 armv8: ls1088ardb: Add environment variable address location for QSPI-NOR
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Yuantian Tang
ae02cf03bc arm64: ls1012a: Add sata distro boot support
Sata is equipped on ls1012a and can be a boot source. Add sata boot
support as an option if available.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Yuantian Tang
f216ef252e arm64: ls1046a: Add sata distro boot support
Sata is equipped on ls1046a and can be a boot source. Add sata boot
support as an option if available.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Tom Rini
fdb6c3232f Merge git://git.denx.de/u-boot-net 2018-01-15 19:01:23 -05:00
Tom Rini
8e9801c283 Merge git://git.denx.de/u-boot-imx 2018-01-15 16:44:18 -05:00
Rob Clark
a970ee2257 db410c: on aarch64 the fdtfile is in per-vendor subdirectory
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-15 16:29:04 -05:00
Jorge Ramirez-Ortiz
5bef39982a db410c: configs: increase gunzip buffer size for the kernel
the kernel fails to boot when it goes over the limit.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:03 -05:00
Jorge Ramirez-Ortiz
100fb0bd99 db820c: stop autoboot when vol- pressed
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Jorge Ramirez-Ortiz
4b684a6b82 db820c: add qualcomm dragonboard 820C support
This commit adds support for 96Boards Dragonboard820C.

The board is based on APQ8086 Qualcomm Soc, complying with the
96Boards specification.

Features
 - 4x Kyro CPU (64 bit) up to 2.15GHz
 - USB2.0
 - USB3.0
 - ISP
 - Qualcomm Hexagon DSP
 - SD 3.0 (UHS-I)
 - UFS 2.0
 - Qualcomm Adreno 530 GPU
 - GPS
 - BT 4.2
 - Wi-Fi 2.4GHz, 5GHz (802.11ac)
 - PCIe 2.0
 - MIPI-CSI, MIPI-DSI
 - I2S

U-Boot boots chained from LK (LK implements the fastboot protocol) in
64-bit mode.

For detailed build instructions see readme.txt in the board directory.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Bhaskar Upadhaya
b0ce187b1f board: ls1012a: LS1012A-2G5RDB board support
LS1012A-2G5RDB belongs to LS1012A family with features 2 2.5G SGMII
PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 11:56:33 -08:00
Nobuhiro Iwamatsu
dcd18eaf61 net: sh-eth: Add to Kconfig and convert
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:26 -06:00
Jorge Ramirez-Ortiz
42091fa9e8 poplar: configs: increase gunzip buffer size for the kernel
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 11:35:37 -05:00
Tom Rini
18af965798 Merge git://git.denx.de/u-boot-tegra 2018-01-12 14:18:34 -05:00
Stephen Warren
e43effc1d8 ARM: Tegra: p2771-0000: use calculate env var feature
Request that all environment variables containing hard-coded address be
calculated at boot time instead.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-01-12 10:12:32 -07:00
Stephen Warren
a9819b9e33 ARM: tegra: p2771-000: increase max DRAM bank count
On this platform, there may be up to 1024 unusable chunks of memory.
Increase CONFIG_NR_DRAM_BANKS so that U-Boot can remember all the banks
required to represent such fragmented memory.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-01-12 10:12:31 -07:00
Stephen Warren
f097532d27 ARM: tegra: use CONFIG_SYS_INIT_SP_BSS_OFFSET
Enable CONFIG_SYS_INIT_SP_BSS_OFFSET for all 64-bit Tegra boards. Place
the stack/... 512KiB from the end of the U-Boot binary. This should be
plenty to accommodate the current DTBs (max 64 KiB), early malloc region
(6KiB), stack usage, and plenty of slack, while still not placing it too
far away from the U-Boot binary.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-01-12 09:52:11 -07:00
Stephen Warren
0d1bd150f0 ARM: tegra: remove SPL config for non-SPL SoCs
No 64-bit Tegra uses SPL. Remove various unused definitions from config
headers.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-01-12 09:52:10 -07:00
Christopher Spinrath
edc57f1df8 ARM: imx: cm_fx6: env: try to determine dtb to use
Some distributions like Fedora expect U-Boot to select a proper
devicetree. Since there are several variants of the cm-fx6 module
featuring different SoC variants and the module can be paired with
several baseboards, it is not viable to hardcode a filename.

Instead, follow the lead of other i.MX6 based devices and try to
determine the devicetree to use with the help of the board name
and the SoC variant exported by the board code, before calling the
distro bootcommand.

For now, only for the Utilite Pro a proper devicetree filename is
known but further variants of the Utilite Computer or other devices
based on the cm-fx6 module may be added in the future.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
2018-01-12 14:28:04 +01:00
Christopher Spinrath
dbeaa1d131 ARM: imx: cm_fx6: export board and soc info to env
Like many other i.MX6 based boards, there are multiple variants of
the cm-fx6 module featuring different SoC variants. Furthermore, the
module can be paired with multiple baseboards.

At the same time modern distribution like Fedora require U-Boot to
select a proper devicetree which depends on the SoC variant and the
baseboard.

Thus, export the SoC variant and the actual board to the environment
following the conventions of other i.MX6 devices (e.g. the NXP boards)
such that the environment can select a devicetree file to load.

For now, we only know for sure that the cm-fx6 module and the SB-fx6m
baseboard amount to a Utilite Computer variant (depending on the SoC).
Further combinations may be added in the future; e.g. CompuLab's
evaluation board once someone can verify the identification string
stored in its eeprom.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-01-12 14:28:04 +01:00
Peng Fan
a3cc43551f imx: mx6ull-14x14-evk: enable DM QSPI driver
To support QSPI DM driver
 - Add spi0 alias for qspi node. Which is used for bus number 0.
 - Modify the n25q256a@0 compatible property to "spi-flash".
 - Modify spi4 (gpio_spi) node to spi5
 - Define DM SPI/QSPI related config to enable QSPI

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-12 14:28:04 +01:00
Peng Fan
d9523fdd11 imx: mx6sxsabresd: enlarge ENV offset
The u-boot-dtb.imx size is about 519KB, so 8 * 64KB conflicts
with u-boot-dtb.imx. Enlarge the offset to 14 * 64KB to fix it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Peng Fan
5dfc9d3766 imx: mx6sxsabresd: Enable DM driver
Enable I2C/MMC/GPIO/REGUALTOR/PMIC/USB DM drivers.
There are some dependency, such as when DM MMC enabled, USB compile error.
Also the i.MX I2C MMC DM driver does not support legacy GPIO interface.
So enable them all together.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Stefano Babic
fb8cac9366 mx6: Support SKS-Kinkel sksimx6 Board
Board  has 1GB RAM and boots from SD Card

U-Boot SPL 2018.01-rc3-00005-ga1898b8 (Jan 02 2018 - 13:48:54)
BT_FUSE_SEL already fused, will do nothing
Trying to boot from MMC1

U-Boot 2018.01-rc3-00005-ga1898b8 (Jan 02 2018 - 13:48:54 +0100)

CPU:   Freescale i.MX6DL rev1.2 996 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 40C
Reset cause: POR
I2C:   ready
DRAM:  1 GiB
MMC:   FSL_SDHC: 0
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]

Signed-off-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Rick Chen
56a4ca8f72 riscv: configs: Add nx25-ae250.h to support RISC-V
Add nx25-ae250 board configuartion options for RISC-V

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>
2018-01-12 08:05:12 -05:00
Tom Rini
6bf634223a Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-11 11:18:49 -05:00
Tom Rini
e38c66edae Merge git://git.denx.de/u-boot-usb 2018-01-11 11:18:29 -05:00
Sumit Garg
1cabeb88eb ls1088ardb: Add SD Secure boot target support
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
[YS: run moveconfig.py -s]
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:32:45 -08:00
Sumit Garg
10e7eaf04a armv8: ls1088a: SPL size reduction
Using changes in this patch we were able to reduce approx 8k
size of u-boot-spl.bin image. Following is breif description of
changes to reduce SPL size:
1. Changes in board/freescale/ls1088a/Makefile to remove
   compilation of eth.c and cpld.c in case of SPL build.
2. Changes in board/freescale/ls1088a/ls1088a.c to keep
   board_early_init_f funcations in case of SPL build.
3. Changes in ls1088a_common.h & ls1088ardb.h to remove driver
   specific macros due to which static data was being compiled in
   case of SPL build.

Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:31:31 -08:00
Bao Xiaowei
7abcd0c018 Powerpc: T208xQDS: Modify the comment of the CONFIG_FSL_PCIE_RESET macro
Remove duplicate macro CONFIG_FSL_PCIE_RESET and update its comment.
It enables PCIe reset to fix link width 2x - 4x.

Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:30:50 -08:00
Ahmed Mansour
541d57663f configs: Move SYS_DPAA_QBMAN to Kconfig
The CONFIG_SYS_DPAA_QBMAN define is used by DPAA1 freescale SOCs to
add device tree fixups that allow deep sleep in Linux. The define was
placed in header files included by a number of boards, but was not
explicitly documented in any of the Kconfigs. A description was added
to the drivers/networking menuconfig and default selection for
current SOCs that have this part

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:58 -08:00
Ahmed Mansour
44262327aa drivers/misc: Share qbman init between archs
This patch adds changes necessary to move functionality present in
PowerPC folders with ARM architectures that have DPAA1 QBMan hardware

- Create new board/freescale/common/fsl_portals.c to house shared
  device tree fixups for DPAA1 devices with ARM and PowerPC cores
- Add new header file to top includes directory to allow files in
  both architectures to grab the function prototypes
- Port inhibit_portals() from PowerPC to ARM. This function is used in
  setup to disable interrupts on all QMan and BMan portals. It is
  needed because the interrupts are enabled by default for all portals
  including unused/uninitialised portals. When the kernel attempts to
  go to deep sleep the unused portals prevent it from doing so

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:47 -08:00
Tom Rini
084edbb689 Merge git://git.denx.de/u-boot-marvell 2018-01-10 08:05:57 -05:00
Tuomas Tynkkynen
e7dd4f9b0c sh: Drop unreferenced CONFIG_* defines
The following config symbols are only defined once and never referenced
anywhere else:

CONFIG_AP325RXA
CONFIG_AP_SH4A_4A
CONFIG_CPU_SH_TYPE_R
CONFIG_ECOVEC
CONFIG_ESPT
CONFIG_MIGO_R
CONFIG_MPR2
CONFIG_MS7720SE
CONFIG_MS7722SE
CONFIG_MS7750SE
CONFIG_R0P7734
CONFIG_R2DPLUS
CONFIG_RSK7203
CONFIG_RSK7264
CONFIG_RSK7269
CONFIG_SH7752EVB
CONFIG_SH7753EVB
CONFIG_SH7757LCR
CONFIG_SH7763RDP
CONFIG_SH7785LCR

Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-10 08:05:51 -05:00
Tuomas Tynkkynen
cfb8462aae ARM: Drop unreferenced CONFIG_MACH_* defines
These macros are all defined once and never checked or used anywhere:

CONFIG_MACH_ASPENITE
CONFIG_MACH_DAVINCI_CALIMAIN
CONFIG_MACH_DOCKSTAR
CONFIG_MACH_EDMINIV2
CONFIG_MACH_GOFLEXHOME
CONFIG_MACH_GONI
CONFIG_MACH_GURUPLUG
CONFIG_MACH_KM_KIRKWOOD
CONFIG_MACH_OPENRD_BASE
CONFIG_MACH_SHEEVAPLUG

Almost all of them were only used for the mach_is_foo() logic in
arch/arm/asm/mach-types.h that were dropped in
commit f9dadaef8b ("arm: Re-sync asm/mach-types.h with
Linux Kernel v4.9")

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-10 08:05:50 -05:00
Patrice Chotard
c0cdd5adc8 board: stm32: add stm32f469-discovery board support
This board offers :

 _ STM32F469NIH6 microcontroller featuring 2 Mbytes of Flash memory
   and 324 Kbytes of RAM in BGA216 package
 _ On-board ST-LINK/V2-1 SWD debugger, supporting USB reenumeration capability:
     _ Mbed-enabled (mbed.org)
     _ USB functions: USB virtual COM port, mass storage, debug port
 _ 4 inches 800x480 pixel TFT color LCD with MIPI DSI interface and capacitive
   touch screen
 _ SAI Audio DAC, with a stereo headphone output jack
 _ 3 MEMS microphones
 _ MicroSD card connector
 _ I2C extension connector
 _ 4Mx32bit SDRAM
 _ 128-Mbit Quad-SPI NOR Flash
 _ Reset and wake-up buttons
 _ 4 color user LEDs
 _ USB OTG FS with Micro-AB connector
 _ Three power supply options:
 _ Expansion connectors and Arduino™ UNO V3 connectors

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:47 -05:00
Patrice Chotard
c8f787760e board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driver
Use available DM stm32f7_gpio.c and pinctrl_stm32.c drivers
instead of board GPIO initialization.

Remove stm32_gpio.c which is no more used and migrate
structs stm32_gpio_regs and stm32_gpio_priv into
arch-stm32f4/gpio.h to not break compilation.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
2d18d72858 board: stm32f429-disco: switch to DM STM32 serial driver
Remove serial_stm32.c driver and uart init from board file,
use available DM serial_stm32x7.c driver compatible for
STM32F4/F7 and H7 SoCs.

The serial_stm32x7.c driver will be renamed later with a more
generic name as it's shared with all STM32 Socs.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
7fd65ef552 board: stm32f429-discovery: switch to DM STM32 sdram driver
Use available DM stm32_sdram.c driver instead of board
SDRAM initialization.
For that, enable OF_CONTROL, OF_EMBED and STM32_SDRAM flags.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:45 -05:00
Andre Heider
6779d65b9f arm64: a37xx: use distro bootcmd
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Andre Heider
e1489ba89d arm64: a37xx: add distro compatible env vars
the values of dt_addr_r/kernel_addr_r/ramdisk_addr_r are taken from
the downstream 'u-boot-2017.03-armada-17.10' release.

the chosen values of scriptaddr and pxefile_addr_r are below fdt_addr_r,
in 1MB steps.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Andre Heider
d7da570770 arm64: a37xx: use disto defaults
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Masahiro Yamada
a322eb9ff6 ARM: uniphier: hide memory top by platform hook instead of CONFIG
I do not see a good reason to do this by a CONFIG option that affects
all SoCs.  The ram_size can be adjusted by dram_init() at run-time.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-09 21:58:19 +09:00
Ran Wang
91f4fb9b89 arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig
Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Stefan Agner
46718353b2 imx: initialize and use generic timer on i.MX 6UL/ULL
The i.MX 6UL/ULL feature a Cortex-A7 CPU which suppor the ARM
generic timer. This change makes use of the ARM generic timer in
U-Boot.

This is crucial to make the ARM generic timers usable in Linux since
timer_init() initalizes the system counter module, which is necessary
to use the generic timers CP15 registers.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-08 17:33:06 +01:00
Stefan Agner
616aa55d17 imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-08 17:33:06 +01:00
Fabio Estevam
290e7cfdbf mx6ull: Handle the CONFIG_MX6ULL cases correctly
Since commit 051ba9e082 ("Kconfig: mx6ull: Deselect MX6UL from
CONFIG_MX6ULL") CONFIG_MX6ULL does not select CONFIG_MX6UL anymore, so
take this into consideration in all the checks for CONFIG_MX6UL.

This fixes a boot regression.

Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Breno Lima <breno.lima@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
2018-01-04 16:29:04 +01:00
Christopher Spinrath
5a6440cac7 ARM: imx: cm_fx6: env: don't run boot scripts twice
Boot scripts located in the root directory of the first partition of
USB, mmc, and SATA drives are executed twice: first by the distro boot
command and then by the legacy boot command. This may have weird side
effects if those scripts only change or extend the environment
(including parts of the boot command itself).

Removing the script execution from the legacy boot command has its own
caveats. For instance, the distro boot command may execute the boot.scr
on the mmc drive, then the boot.scr on the SATA drive, before the
legacy boot command actually boots from the mmc drive. However, the
current behavior would only execute the boot.scr once more before the
actual boot, but it does not prevent the script located on the SATA
drive from being executed, and thus, both scripts from being mixed up.

Considering that the legacy boot command is only in place to boot old
(standard) installations, let's go with the resolution having less
custom code and remove the script execution from the legacy boot
command.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-03 14:29:04 +01:00
Christopher Spinrath
3ef5f6714a ARM: imx: cm_fx6: env: support distro boot command
The current default environment of the cm_fx6 is not suitable for
booting modern distributions.

Instead of extending the custom environment, let's use the distro
boot command, which has been developed for precisely this use case.

If the distro boot command fails, fall back to the old behavior
(except for USB drives where the old behaviour is completely covered
by the distro boot command). That way it is still possible to create
"rescue SD cards" for old installations (e.g. if one messes up the
on-flash environment).

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-03 14:28:49 +01:00
Christopher Spinrath
6b79f71c8e ARM: imx: cm_fx6: env: use standard variables
In preparation for supporting the distro boot command, introduce the
standard variables for specifying load addresses, which are documented
in README and doc/README.distro, and replace the custom variables
used so far with them.

Since the current address layout disregards an address for an initramfs,
also switch to the load addresses used and proven by other imx6 boards
(e.g. the wandboard and nitrogen6x), instead of going on with our own
way.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-03 14:27:12 +01:00
Eric Nelson
baefb63a13 mx6: Add board mx6memcal for use in validating DDR
This is a virtual "board" that uses configuration files and
Kconfig to define the memory layout used by a real board during
the board bring-up process.

It generates an SPL image that can be loaded using imx_usb or
SB_LOADER.exe.

When run, it will generate a set of calibration constants for
use in either or both a DCD configuration file for boards that
use u-boot.imx or struct mx6_mmdc_calibration for boards that
boot via SPL.

In essence, it is a configurable, open-source variant of the
Freescale ddr-stress tool.

	https://community.nxp.com/docs/DOC-105652

File mx6memcal_defconfig configures the board for use with
mx6sabresd or mx6qsabreauto.

Signed-off-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-03 13:58:51 +01:00
Derald D. Woods
c2900f595e ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530, 3730}
This commit updates the configuration files needed to support OF_CONTROL
on the OMAP3 EVM baseboard.

Additionally:
- CONFIG_SYS_THUMB_BUILD is enabled
- CONFIG_SPL_ENV_SUPPORT is enabled

Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb].

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-01 09:04:19 -05:00
Derald D. Woods
2d28ba18b5 ARM: omap3: evm: Do not relocate FDT address
This commit keeps the 'fdtaddr' as provided by DEFAULT_LINUX_BOOT_ENV.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-01 09:04:19 -05:00
Tom Rini
3bb6dc04a9 Merge git://git.denx.de/u-boot-imx 2017-12-29 09:27:04 -05:00
Fabio Estevam
6ca03f0dfb mx6sxsabresd: Load the correct dtb for revA board
Currently only imx6sx-sdb.dtb is loaded, but if revA board is used the
correct dtb is imx6sx-sdb-reva.dtb, so make this possible.

While at it, remove an extra 'mmc dev'.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29 11:18:59 +01:00
Adam Ford
1b25f2d9d7 mx6_common: remove dead code
There is an #ifdef and #endif with nothing in between.  This patch simply
removes this dead/useless code.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29 11:17:22 +01:00
Tom Rini
8e5f0497c8 Merge git://git.denx.de/u-boot-dm 2017-12-27 08:17:05 -05:00
Masahiro Yamada
7e3caa81e0 Move CONFIG_PANIC_HANG to Kconfig
Freescale (NXP) boards have lots of defconfig files per board.
I used "imply PANIC_HANG" for them.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-26 13:10:24 -05:00
Prabhakar Kushwaha
4ace304062 boards: ls1046ardb: disable unavailable "ethernet" node in dts
Linux device tree contains "ethernet" node for all possible
interface supported by SoC i.e. LS1046A.

It is not necessary for a SerDes protocol to support all possible
interface. So disable unavailable "ethernet" node in device tree.

Also, enable FDT_SEQ_MACADDR_FROM_ENV to fetch MAC address
sequentially from environment variables

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-24 12:42:50 -07:00
Tom Rini
76cc372879 Merge git://git.denx.de/u-boot-sunxi 2017-12-19 07:57:33 -05:00
Jagan Teki
e628f00828 sunxi: arm64: Increase CONFIG_SYS_BOOTM_LEN to 32MB
The default value of CONFIG_SYS_BOOTM_LEN, 0x800000, causes error
when uncompressing Image.gz out of FIT image.

  Uncompressing Kernel Image ... Error: inflate() returned -5
Image too large: increase CONFIG_SYS_BOOTM_LEN

and loading Image out of FIT image.
   Loading Kernel Image ... Image too large: increase CONFIG_SYS_BOOTM_LEN
Must RESET board to recover

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-19 16:26:20 +05:30
Tom Rini
eeab579aa8 Merge git://git.denx.de/u-boot-rockchip 2017-12-18 18:39:18 -05:00
Tom Rini
1a3fc354b5 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-12-18 18:39:00 -05:00
Sam Protsenko
dd0829f6c3 am335x_evm: Fix DFU for eMMC
Use dfu_alt_info_emmc variable from include/environment/ti/dfu.h file.
It was probably overlooked when extracting DFU variables to mentioned
file.

This patch fixes DFU on BeagleBone Black, so that we can use commands
like ones below to upgrade various images on eMMC:

    => setenv dfu_alt_info $dfu_alt_info_emmc
    => dfu 0 mmc 1

    $ dfu-util -D MLO -a MLO.raw
    $ dfu-util -D u-boot.img -a u-boot.img.raw

Without this patch, the  user is forced to assign the value to
dfu_alt_info_emmc manually, which contradicts with instructions [1].

[1] http://processors.wiki.ti.com/index.php/Linux_Core_U-Boot_User%27s_Guide

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-12-18 13:06:30 -05:00
Tom Rini
90d75d2efc Xilinx changes for v2018.01-rc2-v2
fpga:
 - Enable loading bitstream via fit image for !xilinx platforms
 
 zynq:
 - Fix SPL SD boot mode
 
 zynqmp:
 - Not not reset in panic
 - Do not use simple allocator because of fat changes
 - Various dt chagnes
 - modeboot variable setup
 - Fix fpga loading on automotive devices
 - Fix coverity issues
 
 test:
 - Fix env test for !hush case - Stephen's patch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlo3tMgACgkQykllyylKDCFQvQCfeFgaC/95gx9orLrHxpDx7s46
 wwYAmwSoXn6hc9bEzgKIppQHblzfqGU6
 =mscK
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.01-rc2-v2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.01-rc2-v2

fpga:
- Enable loading bitstream via fit image for !xilinx platforms

zynq:
- Fix SPL SD boot mode

zynqmp:
- Not not reset in panic
- Do not use simple allocator because of fat changes
- Various dt chagnes
- modeboot variable setup
- Fix fpga loading on automotive devices
- Fix coverity issues

test:
- Fix env test for !hush case - Stephen's patch
2017-12-18 12:23:27 -05:00
York Sun
1b7910a37c armv8: ls1046aqds: Adjust IFC timing for NOR flash
Increase setup, assertion and hold time related to chip-select signal.
Additional delay is needed for the signal to propogate through FPGA.
This adjustment slightly increase the read and write cycle but has no
impact on burst read or write.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-12-18 08:25:07 -08:00
York Sun
63143a5f92 armv8: ls2080a: Increase load image len for NAND boot
Again the image size increases and the length needs to be adjusted.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-12-18 08:24:55 -08:00
Klaus Goger
81f53b0daf rockchip: move CONFIG_ENV_SIZE and CONFIG_ENV_OFFSET to Kconfig
This commit adds ENV_SIZE and ENV_OFFSET configuration items for
ARCH_ROCKCHIP, but keeps these non-visible (i.e. not prompt is given).
With these new items present, the configuration from the header files
is moved to Kconfig.

Keeping these non-visible is necessary to have the possibility to
select new default values if CONFIG_IS_IN_* is changed (interactively
or with oldconfig). Otherwise it will always be set to a previous
value if used with a prompt.  As an example if we do a defconfig with
CONFIG_IS_IN_MMC and change it to CONFIG_IS_IN_SPI_FLASH via
menuconfig, ENV_SIZE and ENV_OFFSET will not be changed to the correct
values as defconfig will already have set them to the default values
of CONFIG_IS_IN_MMC in .config.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-18 00:26:16 +01:00
Kever Yang
c5a4141343 rockchip: config: update part table
User do not need to access the reserved part in system, remove them
from partition table.
Rename atf to trust as generic name for armv7 do not use ATF.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-17 16:55:36 +01:00
Yangbo Lu
4a47bf8a2b armv8: ls1012ardb: add more board version information
Add LS1012ARDB RevC/RevC1/RevC2/RevD/RevE information and
detect it when u-boot starts up.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-14 13:08:47 -08:00
Yangbo Lu
481fb01f41 armv8: ls1012ardb: clean up definitions for I2C IO expanders
This patch is to clean up definitions for I2C IO expanders.
The value 0x10 of __SW_BOOT_EMU is wrong. It should be 0x2.
Fixed it in this patch.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-14 13:08:47 -08:00
Michal Simek
24124abe06 arm64: zynqmp: Add support for generic QSPI boot
This patch is enabling support for SPL QSPI boot.

First of all it is necessary to generate atf-spi.ub which is different
format than atf-uboot.ub (this can be made as legacy image too)

ADDR=`arm-xilinx-linux-gnueabi-readelf -a bl31.elf | grep "Entry point
address" | cut -d ':' -f 2 | sed -e 's/^[ \t]*//'`
aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin
./tools/mkimage -f auto -A arm64 -T firmware -C none -O u-boot -a $ADDR
-e $ADDR -n "atf1" -E -b arch/arm/dts/zynqmp-zcu102.dtb -d bl31.bin
atf-uboot.ub
./tools/mkimage -A arm64 -T firmware -C none -O u-boot -a $ADDR -e $ADDR
-n "atf-for-qspi" -E -d bl31.bin atf-spi.ub

This patch is using this QSPI layout with offsets:
0 boot.bin
512k atf-ub
640k u-boot.bin
1280k u-boot.img

Which corresponding by writing these images(read from MMC)
mmcinfo
sf probe
load mmc 0 10000000 boot.bin
sf erase 0 +$filesize
sf write 10000000 0 $filesize
load mmc 0 10000000 atf-spi.ub
sf erase 0x80000 +$filesize
sf write 10000000 0x80000 $filesize
load mmc 0 10000000 u-boot.bin
sf erase 0xa0000 +$filesize
sf write 10000000 0xa0000 $filesize
load mmc 0 10000000 u-boot.img
sf erase 0x140000 +$filesize
sf write 10000000 0x140000 $filesize

For testing u-boot running in EL3 you can break atf-spi.ub like this:
sf probe
sf erase 0x80000 +4

Then u-boot.img is executed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:21 +01:00
Michal Simek
b45c17c723 arm64: zynqmp: Do not use SPL_SYS_MALLOC_SIMPLE allocator
This was caused by: "fs/fat: Reduce stack usage"
 (sha1:2460098cffacd18729262e3ed36656e6943783ed) which converted
fat code to use malloc. But simple malloc is not freeing space
that's why full malloc implementation is needed.
Malloc space is added to RAM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:21 +01:00
Michal Simek
6ee28cb953 arm64: zynqmp: Do not perform reset in case of panic
Do not perform reset when panic happens because in the next reset
panic happens again and logs are overflood by the same errors.
This can be enabled by default and reset can be performed via watchdog.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:21 +01:00
Michal Simek
52b36fd155 arm: zynq: Fix SPL SD boot mode
This patch is fixing two issues:
1. Insufficient stack size for fat fs buffers
2. Insufficient space in malloc area

Tested on zc702 and zc706.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:15 +01:00
Tom Rini
7ef548e600 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2017-12-13 17:58:46 -05:00
Tom Rini
fd12455643 Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh 2017-12-13 17:58:27 -05:00
Rajesh Bhagat
4c616a13de arm64: ls1012afrdm: Add distro boot support
Include common config_distro_defaults.h and config_distro_bootcmd.h
for u-boot enviroments to support automatical distro boot which
scan boot.scr from external storage devices(e.g. SD and USB)
and execute autoboot script.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13 13:40:29 -08:00
Rajesh Bhagat
a81357a264 arm64: ls1012ardb: Add distro boot support
Include common config_distro_defaults.h and config_distro_bootcmd.h
for u-boot enviroments to support automatical distro boot which
scan boot.scr from external storage devices(e.g. SD and USB)
and execute autoboot script.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13 13:40:29 -08:00
Yangbo Lu
44cdb5b6a1 armv8: ls1088ardb: support force SDHC mode by hwconfig
The BRDCFG5[SPISDHC] register field of Qixis device is used
to control SPI and SDHC signal routing.

10 = Force SDHC Mode
  - SPI_CS[0] is routed to CPLD for SDHC_VS use.
  - SPI_CS[1] is unused.
  - SPI_CS[2:3] are routed to the TDMRiser slot.

11 = Force eMMC Mode
  - SPI_CS[0:3] are routed to the eMMC card.

0X = Auto Mode
  - If SDHC_CS_B=0 (SDHC card installed): Use SDHC mode
    described above.
  - Else SDHC_CS_B=1 (no SDHC card installed): Use eMMC
    mode described above.

In default the hardware uses auto mode, but sometimes we need
to use force SDHC mode to support SD card hotplug, or SD sleep
waking up in kernel. This patch is to support force SDHC mode
by hwconfig.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13 13:40:29 -08:00
Adam Ford
157af4f81f ARM: omap3_logic: Unlock NAND automatically in U-Boot
The Micron Flash is locked by default.  This will automaticlly
unlock so manually unlocking is unnecessary in U-Boot.

Signed-off-by: Adam Ford <aford173@gmail.com>
2017-12-12 21:33:38 -05:00
Tuomas Tynkkynen
cf71338ee7 ata: Migrate CONFIG_MVSATA_IDE to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:16:06 -05:00
Tuomas Tynkkynen
b82e667f79 ata: Migrate CONFIG_LIBATA to Kconfig
This symbol enables some library code used by various SATA drivers,
so make this a non-user-visible symbol select'ed by the respective
drivers, and let moveconfig handle the rest.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:16:05 -05:00
Tuomas Tynkkynen
9fd95ef0d3 ata: Migrate CONFIG_SCSI_AHCI to Kconfig
And use 'imply' liberally.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:13:19 -05:00
Tuomas Tynkkynen
477b16a798 ata: Migrate CONFIG_DWC_AHSATA to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:06:46 -05:00
Tuomas Tynkkynen
9920d151c4 ata: Migrate CONFIG_FSL_SATA to Kconfig
Use 'imply' here liberally to avoid the combinatorial explosion of
defconfig changes in the PowerPC boards.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Tuomas Tynkkynen
ad0ac54361 ata: Migrate CONFIG_SATA_MV to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Tuomas Tynkkynen
32f0398ba5 ata: Migrate CONFIG_SATA_SIL3114 to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Tuomas Tynkkynen
c88ecf47bd ata: Migrate CONFIG_SATA_SIL to Kconfig
Use 'imply' here liberally to avoid the combinatorial explosion of
defconfig changes in the PowerPC boards.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 14:05:48 -05:00
Masahiro Yamada
8755ceb5b8 ARM: socfpga: remove unneeded CONFIG_SYS_NAND_USE_FLASH_BBT
Neither denali.c nor denali_spl.c references this option.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-09 13:40:33 +01:00
Masahiro Yamada
c63e22ea40 ARM: socfpga: remove unused CONFIG_NAND_DENALI_ECC_SIZE
This option is no longer used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-09 13:40:33 +01:00
Marek Vasut
7387d4c234 ARM: rmobile: Add R8A77995 D3 Draak board
Add bits to support yet another board, the R8A77995 D3 Draak.
The DT file is from Linux 4.15-rc1 , commit
b35334447513c14a4dd55a67c269a743d4a4824b .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:27 +01:00
Marek Vasut
d21f08ba81 ARM: rmobile: Add R8A77970 V3M Eagle board
Add bits to support yet another board, the R8A77970 V3M Eagle.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:27 +01:00
Marek Vasut
5cb19e7ad5 ARM: rmobile: Add R8A77970 SoC
Add bits to support yet another SoC, the R8A77970 V3M .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09 13:36:25 +01:00
Tom Rini
335f7b1290 Merge git://git.denx.de/u-boot-mpc85xx 2017-12-08 12:02:01 -05:00
Maxime Ripard
c53654fcda sunxi: Add default partition scheme
The partitions variable is especially useful to create a partition table
from U-Boot, either directly from the U-Boot shell, or through flashing
tools like fastboot and its oem format command.

This is especially useful on devices with an eMMC you can't take out to
flash from another system, and booting a Linux system first to flash our
system then is not really practical.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-07 16:24:32 +01:00
Ashish Kumar
d798a6ee64 armv8: ls1088a: Add nand support for ls1088ardb
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:56:31 -08:00
Vinitha Pillai-B57223
9b457cc6d1 SECURE BOOT: Add fall back option
Add fall back option, to boot from NOR/QSPI/SD for LS1043, LS1046,
LS1021 in case of distro boot failure.

For LS1046, add kernel validation in case of secure boot in sd_bootcmd
and qspi_bootcmd. For LS1043 and LS1021, add kernel validation in case
of secure boot in sd_bootcmd, qspi_bootcmdand  nor_bootcmd.

Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Udit Agarwal
30c41d2191 armv8: LS1088A_QSPI: SECURE_BOOT: Images validation
Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC
phase using esbc_validate command.

Enable validation of boot.scr script prior to its execution dependent
on "secureboot" flag in environment

Add header address for PPA to be validated during ESBC phase for
LS1088A platform based on LAyerscape Chasis 3.

Moves sec_init prior to ppa_init as for validation of PPA sec must
be initialised before the PPA is initialised.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Bhaskar Upadhaya
4def378fab armv8: ls1012a: Modify Kernel and Environment offset
Kernel is now located at 0x1000000 instead of 0xa00000
and envirorment variables are located at 3MB offset instead of
2MB in Flash.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Ran Wang
0f2296bab1 powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization
This issue is exposed after commit 9000eddbae ("drivers/usb/ehci:
Use platform-specific accessors"), the wrong endianness of EHCI
controller programing will cause USB function down.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:54:05 -08:00
Ran Wang
e6a727fffe powerpc/T104xRDB: Fix endian access issue on EHCI intinalization
This issue is exposed after commit 9000eddbae ("drivers/usb/ehci:
Use platform-specific accessors"), the wrong endianness of EHCI
controller programing will cause USB function down.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:53:58 -08:00
Derald D. Woods
8a3556edba omap3: evm: Explicitly use DISTRO_DEFAULTS features at startup
[primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot
[fallback 1] Check MMC 0:1 zImage and run mmcbootz
[fallback 2] Check MMC 0:1 uImage and run mmcboot
[fallback 3] Check NAND partitions and run nandboot

If 'extlinux.conf' is not found on MMC 0, the previous boot behavior is
followed.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2017-12-04 10:23:53 -05:00
Neil Armstrong
c7be3e5a79 ARM: arch-meson: build memory banks using reported memory from registers
As discussed at [1], the Amlogic Meson GX SoCs can embed a BL31 firmware
and a secondary BL32 firmware.
Since mid-2017, the reserved memory address of the BL31 firmware was moved
and grown for security reasons.

But mainline U-Boot and Linux has the old address and size fixed.

These SoCs have a register interface to get the two firmware reserved
memory start and sizes.

This patch adds a dynamic reservation of the memory zones in the device tree bootmem
reserved memory zone used by the kernel in early boot.
To be complete, the memory zones are also added to the EFI reserved zones.

Depends on patchset "Add support for Amlogic GXL Based SBCs" at [2].

[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-October/004860.html
[2] http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005410.html

Changes since v1:
- switched the #if to if(IS_ENABLED()) to compile all code paths
- renamed function to meson_board_add_reserved_memory()
- added a mem.h header with comment
- updated all boards ft_board_setup()

Changes since RFC v2:
- reduced preprocessor load
- kept Odroid-C2 static memory mapping as exception

Changes since RFC v1:
- switch to fdt rsv mem table and efi reserve memory
- replaced in_le32 by readl()

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[trini: Fix warning on khadas-vim over missing <asm/arch/mem.h>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04 10:17:29 -05:00
Neil Armstrong
5ff2ee44ee arm: Add Khadas VIM support based on Meson GXL family
This adds platform code for the Khadas VIM board based on a
Meson GXL (S905X) SoC with the Meson GXL configuration.

This initial submission supports UART, MMC/SDCard and Ethernet with the
Internal RMII PHY.

The meson-gxl-s905x-khadas-vim.dts is synchronised from the linux 4.13
stable tree as of 4.13.8.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 09:59:03 -05:00
Neil Armstrong
96e7b5a174 arm: Add LibreTech CC support based on Meson GXL family
This adds platform code for the Libre Computer CC "Le Potato" board based on a
Meson GXL (S905X) SoC with the Meson GXL configuration.

This initial submission supports UART, MMC/SDCard and Ethernet with the
Internal RMII PHY.

The meson-gxl-s905x-libretech-cc.dts is synchronised from the linux 4.13
stable tree as of 4.13.8.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 09:59:03 -05:00
Dmitry Korunov
8993056fb3 add support for Raspberry Pi Zero W
Signed-off-by: Dmitry Korunov <dessel.k@gmail.com>
2017-12-04 09:59:02 -05:00
Kever Yang
6074cfaa8e rockchip: rk3128: add evb-rk3128 support
evb-rk3128 is an evb from Rockchip based on rk3128 SoC:
- 2 USB2.0 Host port;
- 1 HDMI port;
- 2 10/100M eth port;
- 2GB ddr;
- 16GB eMMC;
- UART to USB debug port;

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30 22:55:27 +01:00
Kever Yang
daeed1dbb5 rockchip: rk3128: add soc basic support
RK3128 is a SoC from Rockchip with quad-core Cortex-A7 CPU
and mali400 GPU. Support Nand flash, eMMC, SD card, USB 2.0 host
and device, HDMI/LVDS/MIPI display.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30 22:55:26 +01:00
Tom Rini
9804d88630 Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh 2017-11-30 10:39:04 -05:00
Tom Rini
55e76b3c86 Merge git://git.denx.de/u-boot-marvell 2017-11-30 10:38:40 -05:00
Marek Vasut
ab61e17571 ARM: rmobile: Rework the ULCB CPLD driver
Rework the ULCB CPLD driver and make it into a sysreset driver,
since that is what the ULCB CPLD driver is mostly for.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 08:54:18 +01:00
Baruch Siach
f86474e281 arm64: mvebu: armada-7k/8k: drop useless #ifdef
CONFIG_ENV_IS_IN_NAND has been removed in commit 2be296538e (Convert
CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig).
CONFIG_ENV_IS_IN_SPI_FLASH has been removed in commit 91c868fe7c
(Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig). The environment #ifdef
is now empty. Remove it.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-11-30 08:30:27 +01:00
Ben Whitten
b2e01ff543 board: laird: add WB50N CPU module
This board is based on the Atmel sama5d3 eval boards.
Supporting the following features:
 - Boot from NAND Flash
 - Ethernet
 - FIT
 - SPL

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Dan Kephart <dan.kephart@lairdtech.com>
2017-11-29 22:36:59 -05:00
Ben Whitten
5aaef60077 board: laird: add WB45N CPU module
This board is based on the Atmel 9x5 eval board.
Supporting the following features:
 - Boot from NAND Flash
 - Ethernet
 - FIT
 - SPL

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Dan Kephart <dan.kephart@lairdtech.com>
2017-11-29 22:36:59 -05:00
Ludovic Desroches
aaa4ba930c board: atmel: add sama5d2_ptc_ek board
Add the SAMA5D2 PTC EK board and remove the SAMA5D2 PTC ENGI board
which was a prototype.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-11-29 22:30:50 -05:00
Rick Chen
c39b79df43 nds32: board: Support ftsdc010 DM.
AG101P/AE3XX enable ftsdc010 dm flow.

Signed-off-by: Rick Chen <rick@andestech.com>
2017-11-30 10:04:25 +08:00
Marek Vasut
02e80f0c11 ARM: rmobile: Migrate boards to RCar IIC drivers
Stop using the old ad-hoc SH I2C driver and use the new RCar IIC
driver instead. The SH I2C driver should be deprecated and removed
eventually.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:21 +01:00
Marek Vasut
76080d0c15 ARM: rmobile: Remove SCIF configs
Since we use DM and DT, these SCIF configuration options are useless.
Remove them.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:21 +01:00
Marek Vasut
61e2ff8e82 ARM: rmobile: Clean up ad-hoc clock macros
As we have a proper clock framework driver, these macros are not
needed, so drop them and clean up the whitelist.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:20 +01:00
Marek Vasut
8c1b52f4b0 ARM: rmobile: Zap ad-hoc DRAM configuration macros
These macros are no longer needed since the DRAM configuration is parsed
from the DT. Drop them all.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:20 +01:00
Marek Vasut
1bb8ea3beb ARM: rmobile: Zap rmobile_sysinfo on Gen3
Since checkboard() is gone, rmobile_sysinfo is also pointless on Gen3.
Furthermore, nuke ad-hoc CONFIG_RCAR_BOARD_STRING which is also dead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:20 +01:00
Marek Vasut
e23eb942ad ARM: rmobile: Stop using rcar-common/common.c on Gen3
Since the Gen3 clock driver now has a .remove callback, it is no
longer necessary to shut the clock down before booting Linux in the
arch_preboot_os hook. Stop using it and while doing so, remove all
the ad-hoc config options which this hook used.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:20 +01:00
Marek Vasut
7bcdd0c1f8 ARM: rmobile: Clean up GIC macros
Pull out the GIC macros from the board configuration files
into the common Gen3 configuration file since these macros
are the same for all Gen3 systems.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:20 +01:00
Marek Vasut
fab5c41b8e ARM: rmobile: Drop CONFIG_USB_MAX_CONTROLLER_COUNT on Gen3 boards
The USB support has been switched to DM, so this macro is no
longer meaningful, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:20 +01:00
Marek Vasut
fade9f2f16 ARM: rmobile: Enable Micrel KSZ90x1 PHY driver on ULCB
Enable the Micrel KSZ90x1 driver on ULCB, since the board is populated
with KSZ9031 and without this driver, the PHY cannot be operated.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:34:20 +01:00
Tom Rini
b06c46de63 Xilinx changes for v2018.1
Zynq:
 - Add support for Syzygy and cc108 boards
 - Add support for mini u-boot configurations (cse)
 - dts updates
 - config/defconfig updates in connection to Kconfig changes
 - Fix psu_init handling
 
 ZynqMP:
 - SPL fixes
 - Remove slcr.c
 - Fixing r5 startup sequence
 - Add support for external pmufw
 - Add support for new ZynqMP chips
 - dts updates
 - Add support for zcu102 rev1.0 board
 
 Drivers:
 - nand: Support external timing setting and board init
 - ahci: Fix wording
 - axi_emac: Wait for bit, non processor mode, readl/write conversion
 - zynq_gem: Fix SGMII/PCS support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAloeqWoACgkQykllyylKDCHO1wCggsSgQqOPdCo207FqI3yj2p0E
 MYkAoI1wKvQcjGJJY19YEC1r70Op8RNo
 =BqNN
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.1

Zynq:
- Add support for Syzygy and cc108 boards
- Add support for mini u-boot configurations (cse)
- dts updates
- config/defconfig updates in connection to Kconfig changes
- Fix psu_init handling

ZynqMP:
- SPL fixes
- Remove slcr.c
- Fixing r5 startup sequence
- Add support for external pmufw
- Add support for new ZynqMP chips
- dts updates
- Add support for zcu102 rev1.0 board

Drivers:
- nand: Support external timing setting and board init
- ahci: Fix wording
- axi_emac: Wait for bit, non processor mode, readl/write conversion
- zynq_gem: Fix SGMII/PCS support
2017-11-29 08:26:07 -05:00
Michal Simek
d28dc3d3dc arm: zynq: Do not show information from checkboard twice
There is no reason to show information about board twice.
Remove boardinfo late calls.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-29 08:02:40 +01:00
Tom Rini
fcc8250c2f Merge git://git.denx.de/u-boot-mips 2017-11-28 16:54:30 -05:00
Paul Burton
fabcffe930 boston: Set CONFIG_SYS_LOAD_ADDR to 0x88000000
Generally we load Linux kernels on Boston boards in the form of FIT
images containing a compressed kernel binary. Linux is linked at
0x80100000 and so we need to decompress the kernel binary to that
address, however this is our default load address which means that
unless explicitly avoided we hit a decompression error as the
uncompressed kernel binary overwrites its compressed version from the
FIT image.

Avoid this by adjusting CONFIG_SYS_LOAD_ADDR to 0x88000000 (or
0xffffffff88000000 for MIPS64 builds) which avoids the address overlap
between compressed & uncompressed kernel binaries.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: u-boot@lists.denx.de
2017-11-28 21:59:30 +01:00
Masahiro Yamada
a27bcbf815 ARM: uniphier: remove unused NAND CONFIG options
The Denali NAND driver does not use these options any more.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:29:00 +09:00
Michal Simek
dea4d2f01d arm: zynq: Add mini u-boot configuration for zynq
Add configuration files/dtses for mini u-boot configurations which runs
out of OCM.

ram top is calculated from 0 that's why +#define CONFIG_SYS_SDRAM_BASE
0xfffc0000
+#define CONFIG_SYS_SDRAM_SIZE  0x40000
was hardcoded.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-28 16:08:47 +01:00
Michal Simek
809704eb4f arm: zynq: Move ZYNQ_SERIAL to Kconfig
Move cadence/zynq serial driver via Kconfig

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-28 16:08:45 +01:00
Michal Simek
7fad6125e4 arm: zynq: Enable FPGA/FPGA_XILINX via Kconfig
Enabling fpga via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:08:45 +01:00
Michal Simek
bd28e5ca8e arm: zynq: Remove empty ifdef env structures from config file
All these configs were moved to Kconfig that's why this empty ifdef
structure is not needed anymore.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 15:53:08 +01:00
Tom McLeod
413ab5b0e1 arm: zynq: Add support for SYZYGY Hub board
Add the Zynq-based SYZYGY Hub board from Opal Kelly. The board
contains a Xilinx Zynq xc7z012s SoC, 1GB DDR3 RAM, and supports
booting from SD.

Signed-off-by: Tom McLeod <tom.mcleod@opalkelly.com>
Cc: Michal Simek <monstr@monstr.eu>
CC: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 15:53:07 +01:00
Tom Rini
6e6cf015e7 Merge git://www.denx.de/git/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-27 07:22:11 -05:00
Jagan Teki
152038ea18 i.MX6UL: icore: Add SPL_OF_CONTROL support
Add OF_CONTROL support for SPL code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27 10:36:40 +01:00
Jagan Teki
1f6e9bd2a7 i.MX6Q: icore: Add SPL_OF_CONTROL support
Add OF_CONTROL support for SPL code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27 10:36:40 +01:00
Fabio Estevam
f086812acd mx6sxsabresd: Use PARTUUID to specify the rootfs location
mx6sxsabresd can run different kernel versions, such as NXP 4.1 or mainline.

Currently the rootfs location is passed via mmcblk number and the
problem with this approach is that the mmcblk number for the SD
card changes depending on the kernel version.

In order to avoid such issue, use the UUID method to specify the
rootfs location.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-11-27 10:35:19 +01:00
Philipp Tomsich
08790230fe rockchip: remove duplicate CONFIG_ENV_SIZE definitions
A few header files still have a definition of CONFIG_ENV_SIZE, causing
warnings during buildman runs.  This removes the duplicate definitions
from evb_px5.h, geekbox.h and rv1108_common.h.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21 23:57:24 +01:00
Philipp Tomsich
4bbb05bcb5 rockchip: rk3188: move CONFIG_SPL_* entries from rk3188_common.h to Kconfig
There still are a few CONFIG_SPL_* options selected using defines from
rk3188_common.h instead of via Kconfig.  This migrates those over to
Kconfig.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21 23:57:23 +01:00
Philipp Tomsich
4d9253fb76 rockchip: rk3188: use boot0 hook to load up SPL in 2 steps
For the RK3188, the BROM will attempt to load up the first stage
image (SPL for the RK3188) in two steps: first 1KB to offset 0x800
in the SRAM and then the remainder to offset 0xc00 in the SRAM.
It always enters at 0x804, though.

With this changeset, the RK3188 boot removes the TPL (stub) stage and
builds a single SPL binary that utilizes the early back-to-bootrom via
the boot0-hook.

Consequently, the passing of the saved boot params via pmu->os_reg[2]
is also removed.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21 23:57:22 +01:00
Philipp Tomsich
b3a6cdc43c rockchip: rk3036: use aligned address for SPL_TEXT_BASE
With the boot0-hook inserting the additional padding to receive our
SPL magic, the SPL_TEXT_BASE can be aligned again.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21 23:57:21 +01:00
Kever Yang
a33fee154b rockchip: rk3288: use aligned address for SPL_TEXT_BASE
After we use boot0 hook, we can use offset '000' instead of '004' as
SPL_TEXT_BASE.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[Updated tag in commit summary:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21 23:57:21 +01:00
Praneeth Bajjuri
65d87d6cfc dra7x: fastboot: Increase recovery partition size
As per current android recommendation
https://source.android.com/devices/architecture/kernel/modular-kernels

1. Android recovery mode should contain both SOC and ODM
kernel modules in the recovery partition.

2. If a kernel module is required both in recovery and normal boot
mode,  the module has to be located in recovery and vendor
partition seperately.

3. Kernel modules used in recovery mode should be independent
of vendor and odm partition

4. Recovery image should contain atleast
storage, display, keypad, battery and pmic modules.

Due to these requirements, recovery image size has increased
to >10MB.

This patch is to increase recovery partition size for TI devices
so that we dont see such flashing error

log:
sending 'recovery' (12560 KB)...
OKAY [  0.436s]
writing 'recovery'...
FAILED (remote: too large for partition)
finished. total time: 0.458s

Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-11-20 20:18:37 -05:00
Peter Senna Tschudin
6b0071c110 mx53: Add Board support for GE PPD
Create board support for GE PPD, based on mx53loco.

Use mx53ppd_defconfig make target to configure for this board.

Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2017-11-20 09:59:02 +01:00
Fabio Berton
2566c4f698 pico-imx6ul: Use FS_GENERIC load command
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-20 09:54:09 +01:00
Fabio Berton
ebbdeb2a10 pico-imx6ul: Add function to create gpt partitions
Command run setup_emmc will create gpt partitions for mmc 0 device
based on patitions variable.

Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-20 09:54:09 +01:00
Fabio Berton
db430cd479 pico-imx6ul: Define partition layout in the environment
Create layout with a boot 16MiB partition and rootfs with remain
space.

Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-20 09:54:09 +01:00
Fabio Berton
d93ab9b166 pico-imx6ul: Add boot and rootfs dfu_alt_info
Change dfu_alt_info variable to use the following altsetting:

  uboot:                     To flash raw U-Boot
  /zImage: boot:             To copy kernel image
  /imx6ul-pico-hobbit.dtb:   To copy dtb file
  rootfs:                    To copy rootfs

List the currently attached DFU capable USB devices running:
  sudo dfu-util -l

Flash U-Boot:
  sudo dfu-util -D u-boot.imx -a uboot

Copy boot files:
  sudo dfu-util -D zImage -a /zImage
  sudo dfu-util -D imx6ul-pico-hobbit.dtb -a /imx6ul-pico-hobbit.dtb

Flash rootfs:
  sudo dfu-util -D rootfs.ext4 -a rootfs

To copy boot files you need to have a formated mmc 0:1 partition. To
format with ext4 filesystem you can use ums.

Run on target:
  ums 0 mmc 0

and on host:
  sudo mkfs.ext4 /dev/sdx1

Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-20 09:54:09 +01:00
Fabio Berton
65551e389a pico-imx6ul: Use PARTUUID to specify the rootfs location
Currently the rootfs location is passed via mmcblk number and using
the UUID method to specify the rootfs location is a better approach
working even if mmcblk number for the eMMC changes depending on the
kernel versions.

Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-20 09:54:09 +01:00
Fabio Berton
9cc71cfa11 pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable
Create CONFIG_DFU_ENV_SETTINGS to set dfu environment settings to
improve human readable code.

Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-11-20 09:54:09 +01:00
Tom Rini
b6251db8c3 Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND
We first introduce CONFIG_USE_BOOTCOMMAND, similar to
CONFIG_USE_BOOTARGS.  We then migrate CONFIG_BOOTCOMMAND for most
CONFIG_DISTRO_DEFAULT users.  In some cases platforms have a complex
scheme around this usage, and these have been defered for the moment so
that platform maintainers can work on a migration plan.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-11-17 16:37:26 -05:00
Dongjin Kim
232ed3ca53 arm: config: fix default console only to specify the device
Since CONFIG_DEFAULT_CONSOLE is already started with "console=",
the console argument in CONFIG_EXTRA_ENV_SETTINGS is expanded to
"console=console=ttySAC1,115200n8" and this causes the wrong
console device.

  #define CONFIG_DEFAULT_CONSOLE         "console=ttySAC1,115200n8\0"
  ...
  #define CONFIG_EXTRA_ENV_SETTINGS \
		"console=" CONFIG_DEFAULT_CONSOLE

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-17 10:54:32 -05:00
Jorge Ramirez-Ortiz
9a16153834 configs: dragonboard410c: Save environment data on eMMC
Save the environment data at the end of the boot partition on emmc

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2017-11-17 07:44:13 -05:00
Neil Armstrong
ae0d82fc64 arm: amlogic: p212: Add support for Ethernet with Internal PHY
This patch adds support for the Internal RMII Ethernet PHY on the
Amlogic P212 Reference Board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-11-17 07:44:13 -05:00
Neil Armstrong
cade865a43 arm: add initial support for Amlogic P212 based on Meson GXL family
This adds platform code for the Amlogic P212 reference board based on a
Meson GXL (S905X) SoC with the Meson GXL configuration.

This initial submission only supports UART and MMC/SDCard, support for the
internal Ethernet PHY in Work In Progress.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Beniamino Galvani <b.galvani@gmail.com>
2017-11-17 07:43:32 -05:00
Tom Rini
ebca2083d3 Merge git://www.denx.de/git/u-boot-marvell 2017-11-16 09:32:04 -05:00
Jon Nettleton
962b8fef91 arm: mvebu: clearfog: Fix SPI-NOR flash access
The production variant of the SPI flash used by the clearfog
devices are based on winbond chips.  Additionally enable
SPI_FLASH_BAR since some variants will have 16MB of flash
that requires this to be enabled.

Remove the default speed and mode; these values are taken from the
device tree when CONFIG_DM_SPI_FLASH is enabled.

Add default bus, so that 'sf' detects the SPI flash by default.

Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: remove speed/mode; add bus; move winbond to defconfig]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-11-16 11:45:20 +01:00
Shengzhou Liu
bc085549af armv8: ls2080ardb: Add sd_bootcmd for distro fallback in case of sdboot
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15 10:56:35 -08:00
Shengzhou Liu
397a173e9e armv7: ls1021atwr: Add sd_bootcmd for distro fallback in case of sdboot
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15 10:56:29 -08:00
Shengzhou Liu
aab2ef9aa8 armv8: ls1046ardb: Add sd_bootcmd for distro fallback in case of sdboot
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15 10:56:22 -08:00
Shengzhou Liu
1c8263deb6 armv8: ls1043ardb: Add sd_bootcmd for distro fallback in case of sdboot
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15 10:56:08 -08:00
Ashish Kumar
d9195c62fa armv8: ls1088ardb: Add distro boot support
Distro boot support gives flexibility to run distro RFS like Ubuntu
being deployed from SD card or SATA drive. If it fails to detect
external storage, fall back to qspi/sd boot.

Enable this by default in RDB's defconfig by selecting
CONFIG_DISTRO_DEFAULTS

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Zhang Ying <zhangying@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15 10:52:26 -08:00
Ashish Kumar
91fded6200 armv8: ls1088aqds: Add SD boot support for ls1088qds
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15 10:52:19 -08:00
Ashish Kumar
099f4093a5 armv8: ls1088ardb: Add SD boot support for ls1088
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15 10:51:46 -08:00
Ashish Kumar
f65425fb46 armv8: ls1088: Enable SATA for ls1088
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15 10:50:54 -08:00
Ashish Kumar
6447eb0625 armv8: ls1088a: Move CONFIG_SPI_FLASH_SPANSION to defconfig
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-14 08:33:20 -08:00
Jagan Teki
36b6e0cc3c rockchip: configs: vyasa: Update falcon offsets
Update the falcon offsets for args to 16MB and kernel to 17MB
Since the below commit updated U-Boot proper location along
with rockchip boot image offsets
"spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip"
(sha1: 8f4d62b403)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-10 14:08:22 +01:00
Tom Rini
1c4043e532 Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2017-11-09 08:11:40 -05:00
Tom Rini
3c674b7e87 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-11-09 08:11:30 -05:00
Lukasz Majewski
a3eec24ad3 imx:display5: Add support for LWN's DISPLAY5 board
This commit provides support for LWN's IMX6Q based DISPLAY5 board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09 11:32:49 +01:00
Artturi Alm
e286fada9d sunxi: fix CONFIG_SUNXI_EMAC references
fixes CONFIG_SUNXI_EMAC references from drivers/net/Makefile and
include/configs/sunxi-common.h likely forgotten in:
	commit abc3e4df59 ("sunxi: Convert SUNXI_EMAC to Kconfig")

Signed-off-by: Artturi Alm <artturi.alm@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-09 14:39:09 +05:30
Fabio Estevam
07df697e14 mx25: Move MX25 selection to Kconfig
The motivation for moving MX25 selection to Kconfig is to be
able to better handle MX25 specific errata, so that an errata option
can be selected at SoC level instead of board level.

This selection method also aligns with the way other i.MX SoCs are
selected in U-Boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2017-11-07 10:12:50 +01:00
Klaus Goger
b5557ffc0f rockchip: board: puma_rk3399: make env location selectable via Kconfig
The environment storage location is selectable via Kconfig. We support
eMMC, SD and SPI-NOR as location for U-Boot. This adds support to store
the environment in the SPI-NOR additional to the default eMMC location.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07 09:16:57 +01:00
Kever Yang
be942f2e0d rockchip: config: use common CONFIG_ENV_SIZE for all SoCs
All Rockchip SoCs use 32KB as CONFIG_ENV_SIZE.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07 09:16:56 +01:00
Kever Yang
c742043f74 rockchip: config: sync the ENV offset from rockchip legacy U-Boot
Using the ENV offset from rockchip legacy U-Boot for all SoCs,
the offset is 4MB-32KB

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07 09:16:56 +01:00
Kever Yang
5d2f1d8271 rockchip: rock: remove CONFIG_ENV_OFFSET
We use the same default ENV setting in rockchip_common.h for all SoC.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07 09:16:56 +01:00
Patrice Chotard
e36591c350 spear: fix STMicroelectronics copyright
Uniformize STMicroelectronics copyrights headers for SPEAR
related code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06 09:51:01 -05:00
Patrice Chotard
1537d38619 stv0991: fix STMicroelectronics copyright
Uniformize STMicroelectronics copyrights headers for STV0991
related code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06 09:51:01 -05:00
Patrice Chotard
3bc599c956 stm32: fix STMicroelectronics copyright
Uniformize STMicroelectronics copyrights headers for STM32
related code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06 09:51:01 -05:00
Patrice Chotard
fb48bc448c sti: fix STMicroelectronics copyright
Uniformize all STMicroelectronics copyrights headers for STi
related code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06 09:51:01 -05:00
Tom Rini
43ede0bca7 Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT
We move all instances of CONFIG_MTDIDS_DEFAULT and
CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files.
There's a few cases here where we need to expand upon what was in the
header file.

Tested-by: Adam Ford <aford173@gmail.com>  #omap3_logic
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-05 11:21:35 -05:00
Kever Yang
4c1a60c597 rockchip: evb-rk3328: remove CONFIG_ENV_OFFSET
Remove CONFIG_ENV_OFFSET for there already have one in rockchip_common.h

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01 11:21:32 +01:00
Klaus Goger
6e278a8c1c rockchip: configs: only add available BOOT_TARGET_DEVICES
BOOT_TARGET_DEVICES should only be added if the corresponding u-boot
command is enabled.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01 11:21:32 +01:00
Klaus Goger
e3e842f17c rockchip: configs: use rockchip-common.h for rk3368
rockchip-common.h already defines values that are missing from
rk3368_common.h

For example BOOT_TARGET_DEVICES was defined empty and therefore
distroboot had no boot targets.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01 11:21:32 +01:00
Marek Vasut
506abdb4ee ARM: imx6: Enable UMS and DFU on DHCOM i.MX6 PDK
Enable UMS and DFU, so that the eMMC can be accessed via the
USB gadget port on the board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2017-10-31 11:11:10 +01:00
Fabio Estevam
e1f0715f64 wandboard: Add support for the MX6QP variant
Add support for the latest MX6QP wandboard variant.

Based on Richard Hu's work from Technexion's U-Boot tree.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-31 11:01:38 +01:00
Stefan Agner
c0f432c377 configs: vf610: increase maximum size and enforce correct limit
On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB.
Currently 32KiB is reserved for the IMX header. However, this is
not reflected in the size limit. In v2017.11-rc2 the actual size
limit (512KiB-32KiB) has been reached for Colibri VF61, which
lead to a successful build of U-Boot but not a working binary.

The IMX header is much smaller than 32KiB, typically around 1KiB.
Decrease the reserved size to 4KiB and specify the correct U-Boot
size limit. Apply this new base address and limit for all Vybrid
based boards.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-10-31 11:00:54 +01:00
Fabio Estevam
c46305a829 imx: Fix regression with CONFIG_DM_MMC=y
When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the
SD/eMMC card cannot be used.

Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure.

Tested on mx6slevk, mx7dsabresd and mx6ullevk.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Adam Ford <aford173@gmail.com>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-10-30 18:54:38 +01:00
Tom Rini
2d5e6b4aac Merge git://git.denx.de/u-boot-video 2017-10-29 10:11:08 -04:00
Tom Rini
bb3d9ed3a9 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-10-27 21:59:10 -04:00
Ran Wang
90be2fe37e arm: layerscape: Remove CONFIG_USB_MAX_CONTROLLER_COUNT
Because COMFIG_DM_USB has been enabled and will not use it anymore.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:44:31 -07:00
Ran Wang
420b0eba3c usb: host: Move CONFIG_XHCI_FSL to Kconfig
use Kconfig to select xhci accordingly.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:44:06 -07:00
Ran Wang
4417e83495 arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to Kconfig
Use Kconfig to select QE-HDLC and USB pin-mux.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:43:57 -07:00
Yuantian Tang
b584510f07 armv8: configs: ls1012a: correct the generic timer frequency
On ls1012a soc, core clock source frequency is fixed at 100Mhz.
Generic timer frequency is core clock source divided by 4, which
is 25Mhz.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:39:49 -07:00
Ashish Kumar
f89072ab92 armv8: ls1088: Move CONFIG_ENV_IS_IN_SPI_FLASH to defconfig
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:39:34 -07:00
Masahiro Yamada
33fe271278 AT91: remove CONFIG_PMECC_INDEX_TABLE_OFFSET
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
268d05f552 exynos: remove CONFIG_LCD_MENU_BOARD
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
795428fc67 net: remove CONFIG_NET_MULTI
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
a28b90b787 mpc85xx: xpedite550x: remove CONFIG_FDT_FIXUP_PCI_IRQ
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
1c0eece3d8 AM33XX: etamin: remove CONFIG_DFU_MTD
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
eac89575af MX28: remove CONFIG_DEFAULT_SPI_CS
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
00687674a9 exynos: remove CONFIG_CORE_COUNT
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
a0dd989ffb SOCFPGA: remove CONFIG_AUTONEG_TIMEOUT
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
ac47750460 ARC: remove CONFIG_ARC_UART_BASE
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
e5fa2b368c sh7734: remove CONFIG_553MHZ_MODE
This macro only appears in commented-out lines.  It is not referenced
by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
020e701d8d mpc85xx: freescale: remove CONFIG_ADDR_STREAMING
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
8e07bb2b2b omap4: sdp4430: remove CONFIG_4430SDP
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-27 08:52:22 -04:00
Masahiro Yamada
b7e4dadfd9 IMX: novena: remove CONFIG_I2C_MXC
This macro is defined, but not referenced by anyone.

I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Schocher<hs@denx.de>
2017-10-27 08:52:22 -04:00
Icenowy Zheng
f6bdddc92b video: add an option for video simplefb via DT
Add an option to indicate that the video driver should setup a SimpleFB
node that passes the video framebuffer initialized by U-Boot to the
operating system kernel.

Currently only the Allwinner DE driver uses this option, and the
definition of this option in the sunxi-common.h config header is
converted to an imply of this option from CONFIG_VIDEO_SUNXI.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-26 11:53:39 +02:00
Icenowy Zheng
401a3ca0fb sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
The sunxi DE1 video option used to be CONFIG_VIDEO, which has the same
name as the "Enable legacy video support" option in
drivers/video/Kconfig.

Change the option name to CONFIG_VIDEO_SUNXI, which is really used by
Makefile under drivers/video/sunxi/, and defined in sunxi-common.h
when CONFIG_VIDEO is selected before this change. Now CONFIG_VIDEO_SUNXI
selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig and
config headers are all converted to use CONFIG_VIDEO_SUNXI.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2017-10-26 11:48:49 +02:00
Michal Oleszczyk
d17207ea83 chiliboard config: use CONFIG_DEFAULT_FDT_FILE as env variable
Remove hardcoded ftd file name from environment variables.
Use CONFIG_DEFAULT_FDT_FILE macro instead.

Signed-off-by: Michal Oleszczyk <m.oleszczyk@grinn-global.com>
2017-10-23 17:25:40 -04:00
Masahiro Yamada
8b7f4b9cc1 mtd: remove MTDDEBUG() and CONFIG_MTD_DEBUG
All users of this macro have been converted.  Remove MTDDEBUG and
related CONFIG options.

ubifs_dbg_msg_key() is kept.  It is silent unless DEBUG is defined.

I am not touching scripts/config_whitelist.txt.  The deprecated options
will be dropped by the next resync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23 14:07:26 -04:00
Masahiro Yamada
15d0f3538a ARM: uniphier: remove verify=n from environments
If the environment "verify" is set to n, the image verification
is entirely skipped.  Remove it as a preparation for verified boot.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23 01:02:05 +09:00
Masahiro Yamada
571e050b45 ARM: uniphier: increase CONFIG_SYS_BOOTM_LEN to 32MB
The default value of CONFIG_SYS_BOOTM_LEN, 0x800000, causes error
when uncompressing Image.gz out of FIT image.

   Uncompressing Kernel Image ... Error: inflate() returned -5
Image too large: increase CONFIG_SYS_BOOTM_LEN

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23 01:02:05 +09:00
Adam Ford
8daec2d9d3 net: Add SMC911X driver to Kconfig, convert
We add the various SMC91XX symbols to drivers/net/Kconfig and then this
converts the following to Kconfig:
   CONFIG_SMC911X
   CONFIG_SMC911X_BASE
   CONFIG_SMC911X_16_BIT
   CONFIG_SMC911X_32_BIT

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Apply to the rest of the tree, re-squash old and new patch]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-20 21:40:26 -04:00
Adam Ford
0a9ef45158 Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig
This converts the following to Kconfig:
   CONFIG_NAND_MXC
   CONFIG_NAND_OMAP_GPMC
   CONFIG_NAND_OMAP_GPMC_PREFETCH
   CONFIG_NAND_OMAP_ELM
   CONFIG_SPL_NAND_AM33XX_BCH
   CONFIG_SPL_NAND_SIMPLE
   CONFIG_SYS_NAND_BUSWIDTH_16BIT

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
[trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues,
        add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-20 16:44:07 -04:00
Vishal Mahaveer
3f3607ded4 arm: dra7xx: Add vendor partition to Android GPT table for eMMC
Add vendor partition to Android GPT table for eMMC.

A Vendor image contains SoC-specific code and configuration.

Prior to Android 8.0, the vendor partition was optional ;
files belonging to these images were placed in boot.img or system.img
with symlinks (such as /vendor >/system/vendor ) when absent.

Android 8.0 makes the vendor partition mandatory

The goal is to modularize Android partitions with standard interface between
the Android Platform (on system.img ) and vendor-provided code(on vendor.img).

This standard interface enables the Android Platform to be updated
without affecting the SoC partitions. This makes it possible to upgrade a
device system.img from Android 8.0 to Android P while other images (such as
vendor.img) remain at Android 8.0. This modularity enables timely
Android platform upgrades (such as monthly security updates )
without requiring SoC/ODM partners to update SoC- and device-specific code.

Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-16 09:43:34 -04:00
Praneeth Bajjuri
d5a42f6634 arm: am57xx: Add vendor partition to Android GPT table for eMMC
Add vendor partition to Android GPT table for eMMC.

A Vendor image contains SoC-specific code and configuration.

Prior to Android 8.0, the vendor partition was optional ;
files belonging to these images were placed in boot.img or system.img
with symlinks (such as /vendor >/system/vendor ) when absent.

Android 8.0 makes the vendor partition mandatory

The goal is to modularize Android partitions with standard interface between
the Android Platform (on system.img ) and vendor-provided code(on vendor.img).

This standard interface enables the Android Platform to be updated
without affecting the SoC partitions. This makes it possible to upgrade a
device system.img from Android 8.0 to Android P while other images (such as
vendor.img) remain at Android 8.0. This modularity enables timely
Android platform upgrades (such as monthly security updates )
without requiring SoC/ODM partners to update SoC- and device-specific code.

Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-16 09:43:34 -04:00
Tuomas Tynkkynen
0c19efa7e1 ARM: tegra: Remove unused define CONFIG_ARMCORTEXA9
This macro isn't used by anything, and in fact hasn't ever been used
according to the Git logs.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16 09:42:51 -04:00
Tom Rini
26f9184e09 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-10-12 13:36:58 -04:00
Marek Vasut
0a333602df ARM: imx6: Add DHCOM i.MX6 PDK board support
Add support for the DHCOM i.MX6 PDK board. This board has:
- FEC ethernet
- EHCI USB host
- 3x SDMMC

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2017-10-12 18:01:06 +02:00
Uri Mashiach
1a95913979 imx: mx7: spl: remove redundant SATA definitionas
The i.MX7 SOC doesn't include the SATA interface.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 18:00:46 +02:00
Anatolij Gustschin
fe12386c2a i.mx6ul: xpress: update UART init for current board revision
UART pinmux has been changed on the last board revision. Change
board pinmux accordingly. Console is on UART7 now, add pinmux,
base address and update console string in environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12 17:58:42 +02:00
Fabio Estevam
a0046393da mx6slevk: Use PARTUUID to specify the rootfs location
mx6slevk can run different kernel versions, such as NXP 4.1 or mainline.

Currently the rootfs location is passed via mmcblk number and the
problem with this approach is that the mmcblk number for the SD
card changes depending on the kernel version.

In order to avoid such issue, use the UUID method to specify the
rootfs location.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 17:58:15 +02:00
Fabio Estevam
066d97c733 wandboard: Add support for the latest revd1 revision
Latest wandboard hardware revision is revd1, which brings the following
new features:

- PFUZE100 PMIC
- AR8035 Ethernet PHY
- Upgrade Wifi/BT chip to BCM4339/BCM43430.

The detection mechanism is to probe the PMIC and when it is
found, then the revision of the board is revd1.

As the detection is done via PMIC, we need to print the board version
at a later stage via CONFIG_DISPLAY_BOARDINFO_LATE and also need
to disable CONFIG_DISPLAY_BOARDINFO, which is done much earlier.

Make the necessary adjustments for the AR8035 PHY to work on revd1.

Based on Richard Hu's work from Technexion's U-Boot tree.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 17:31:16 +02:00
Ilya Ledvich
6963204c4c arm: imx7d: add support for Compulab cl-som-imx7
Add initial support for Compulab cl-som-imx7 SoM.
The initial support includes:
 - MMC
 - eMMC
 - SPI flash
 - I2C
 - FEC
 - USB
 - Serial console

Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
2017-10-12 17:31:16 +02:00
Uri Mashiach
c5c6f37a04 imx: mx7: SPL support for i.MX7
Add configuration file and spl_boot_device function for the i.MX7 SPL.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12 17:31:16 +02:00
Fabio Estevam
fadcf4811a topic_miami: Remove CONFIG_CMD_BOOTZ undef
CONFIG_CMD_BOOTZ option has been converted to defconfig, so there
is no need to undefine it in board config file anymore.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 17:31:16 +02:00
Fabio Estevam
d26e2c8453 mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
CONFIG_CMD_BOOTZ symbol does not work in board config file
anymore, so fix this by moving it to Kconfig.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2017-10-12 17:31:16 +02:00
Fabio Estevam
54ba383873 mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition
CONFIG_SPL_PAD_TO is already defined inside "imx6_spl.h", so there
is no need to redefine it in the board config files.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2017-10-12 17:31:16 +02:00
Otavio Salvador
baf348fb36 mx25pdk: Remove duplicated define
The CONFIG_SYS_MMC_ENV_DEV is duplicated, drop it.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-12 17:31:16 +02:00
Otavio Salvador
f3652c1888 mx25pdk: Use generic filesystem commands
This rework the board to use the generic filesystem commands instead
of forcing the use of FAT for the boot files.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-12 17:31:16 +02:00
Tom Rini
2ee87b0c1a Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2017-10-10 20:14:38 -04:00
Tuomas Tynkkynen
45c9d96ae4 configs: Re-sync CONFIG_CMD_IMLS with moveconfig
The option is specified in Kconfig, but still a few config header files
are overriding the choice by #undef'ing it. Re-sync the option with
moveconfig to rid of the #undefs.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-10 17:52:07 -04:00
Tom Rini
74d90d17ee Merge git://git.denx.de/u-boot-video 2017-10-09 13:31:33 -04:00
York Sun
23af484b01 armv8: ls1043ardb_sdcard: prepare falcon boot
Due to a conflict with recent Primary Protected Application (PPA),
PPA cannot be loaded for SPL stage, falcon boot is not enabled by
default. With compatible PPA image, to enable falcon boot, activate
these Kconfig options in defconfig
CONFIG_SPL_FIT=y
CONFIG_SPL_FSL_LS_PPA=y
CONFIG_SPL_GZIP=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_OF_LIBFDT=y

Because environment variables are not avaiable during SPL stage for
SD boot, set "boot_os=y" as default.

Signed-off-by: York Sun <york.sun@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-09 08:48:45 -07:00
York Sun
f554411bea armv8: ls1043ardb: Use static DDR setting for SPL boot
This board has soldered DDR chips. To reduce the SPL image size,
use static DDR setting instead of dynamic DDR driver.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-10-09 08:48:45 -07:00
Bogdan Purcareata
c48deb9073 armv8: ls1088a: Update MC boot sequence
The MC boot sequence is contained in mc_env_boot. Update LS1088A
boards to use this function, and hook it to reset_phy so that it's
called late enough, after the ports have been initialized, for
proper DPC / DPL fixup.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09 08:48:44 -07:00
Fabio Estevam
4912551bb0 armv7: ls1021aiot: Move CONFIG_CMD_BOOTZ to Kconfig
CONFIG_CMD_BOOTZ symbol does not work in board config file
anymore, so fix this by moving it to Kconfig.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09 08:48:44 -07:00
Gong Qianyu
752513d8d9 armv8: ls1046aqds: Fix NAND offset for Fman ucode and env
Fix a bug of 'commit 8104deb2d6 ("armv8: layerscape: Adjust memory
mapping for Flash/SD card on LS1046A")' as NAND block size is 256KB
on LS1046AQDS.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09 08:35:58 -07:00
Patrice Chotard
ca4abdcdfa configs: stm32: update SRAM address for STM32H7 disco and eval
As suggested by Vikas Manocha, update embedded SRAM address
to use AXI SRAM available on D1 domain instead of using
AHB SRAM (D2 domain).
On some STM32H743 SoCs, D2 domain SRAM is accessible even if
SRAMxEN bit in AHB2ENR bits are not set whereas on others SoCs
version it's not accessible.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-10-08 16:19:56 -04:00
Lee Jones
b813908354 board: STiH410-B2260: set ramdisk_addr_r to 0x48000000
Add missing ramdisk_addr_r param and set it to 0x48000000

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08 16:19:56 -04:00
Nicolas Le Bayon
7aac4e916e board: STiH410-B2260: fix sdram size
32MB are reserved for TrustZone purpose

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
2017-10-08 16:19:56 -04:00
Patrice Chotard
3ef751ed8c board: STiH410-B2260: update environment variable
Update environment variable by updating:
 _ BOOT_TARGET_DEVICE
 _ CONFIGS_BOOTARGS
 _ kernel_addr_r, fdtfile, fdt_addr_r, scriptaddr, fdt_high, intird_high

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08 16:19:56 -04:00
Tom Rini
83e92f79d3 Merge git://git.denx.de/u-boot-x86 2017-10-07 09:12:04 -04:00
Andy Shevchenko
256df1e1c6 x86: edison: Bring minimal ACPI support to the board
This board is based on Intel Tangier SoC (Intel Merrifield platform)
and may utilize ACPI powerfulness.

Bring minimum support by appending initial DSDT table for it.

Note, the addresses for generated tables are carefully chosen to avoid
any conflicts with existing shadowed BIOS data. The user have somewhat
like ~31 kB available for compiled ACPI tables that ought to be enough.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-10-07 15:07:59 +08:00
Stefan Roese
70e6c8c65a x86: theadorable-x86-common: Move "-generic" into kernel-ver variable
This enables the easier usage of "-custom" kernel versions as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-07 12:06:27 +08:00
Stefan Roese
43c9841042 x86: theadorable-x86-common: Add further pci hotplug cmdline parameters
This is needed for the PCIe hotplug to work correctly on some boards.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-07 12:06:27 +08:00
Tuomas Tynkkynen
32f1182926 ARM: Add a new arch + board for QEMU's 'virt' machine
This board builds an U-Boot binary that is bootable with QEMU's 'virt'
machine on ARM. The minimal QEMU command line is:

    qemu-system-arm -machine virt,highmem=off -bios u-boot.bin

(Note that the 'highmem=off' parameter to the 'virt' machine is required for
PCI to work in U-Boot.) This command line enables the following:
    - u-boot.bin loaded and executing in the emulated flash at address 0x0
    - A generated device tree blob placed at the start of RAM
    - A freely configurable amount of RAM, described by the DTB
    - A PL011 serial port, discoverable via the DTB
    - An ARMv7 architected timer
    - PSCI for rebooting the system
    - A generic ECAM-based PCI host controller, discoverable via the DTB

Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus.
The following ones are supported by both U-Boot and Linux:

- To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.:
    -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0
- To add an Intel E1000 network adapter, pass e.g.:
    -net nic,model=e1000 -net user
- To add an EHCI-compliant USB host controller, pass e.g.:
    -device usb-ehci,id=ehci
- To add a NVMe disk, pass e.g.:
    -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:16 -04:00
Maxime Ripard
de86fc3859 sunxi: Remove the MMC index hack
The current code, if there's both an eMMC and an MMC slot available on the
board, will swap the MMC indices based on whether we booted from the eMMC
or the MMC. This way, the MMC we're supposed to boot on will always have
the index 0.

However, this causes various issues, for example when using other
components that base their behaviour on the MMC index, such as fastboot.

Let's remove that hack, and take the opposite approach. The MMC will always
have the same index, but the bootcmd will pick the same device than the one
we booted from. This is done through the introduction of the mmc_bootdev
environment variable that will be filled by the board code based on the
boot device informations we can get from the SoC.

In order to not introduce regressions, we also need to adjust the fastboot
MMC device and the environment device in order to set it to the eMMC, over
the MMC, like it used to be the case.

Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:06 +02:00
Maxime Ripard
47738acced cmd: Move CONFIG_RANDOM_UUID to Kconfig
CONFIG_RANDOM_UUID is used by the GPT command to generate random UUID when
none are provided.

Move that option to Kconfig.

Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
10ac57fda3 usb: gadget: usb_ether: Move settings to common
The usb_ether gadget duplicates the USB settings for the manufacturer,
product ID and vendor ID.

Make sure we use the common option so that we can expect a single VID/PID
couple for a single device.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00