The filesystem and EFI (capsule and secure boot) test setups try to use
guestmount and virt-make-fs respectively to prepare disk images to run
tests on. However, these libguestfs tools need a kernel image and fail
with the following message (revealed in debug/trace mode) if it can't
find one:
supermin: failed to find a suitable kernel (host_cpu=x86_64).
I looked for kernels in /boot and modules in /lib/modules.
If this is a Xen guest, and you only have Xen domU kernels
installed, try installing a fullvirt kernel (only for
supermin use, you shouldn't boot the Xen guest with it).
This failure then causes these tests to be skipped in CIs. Install a
kernel package in the Docker containers so the CIs can run these
tests with libguestfs tools again (assuming the container is run with
necessary host devices and privileges). As this kernel would be only
used for virtualization, we can use the kernel package specialized for
that. On Ubuntu systems kernel images are not readable by non-root
users, so explicitly add read permissions with chmod as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add DM (device manager) firmware image to the fit image that is loaded by
R5 SPL. This is needed with the HSM rearch where the firmware allocation
has been changed slightly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>
Add support for providing ATF load address with a Kconfig symbol.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210604163043.12811-2-a-govindraju@ti.com
For scenarios like OF_BOARD or OF_PRIOR_STAGE, no device tree blob is
provided in the U-Boot build phase hence the binman node information
is not available. In order to support such use case, a new Kconfig
option BINMAN_STANDALONE_FDT is introduced, to tell the build system
that a device tree blob containing binman node is explicitly required
when using binman to package U-Boot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add an entry for RISC-V OpenSBI's 'fw_dynamic' firmware payload.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Currently there are 2 binman test cases using the same 172 number.
It seems that 172_fit_fdt.dts was originally named as 170_, but
commit c0f1ebe9c1 ("binman: Allow selecting default FIT configuration")
changed its name to 172_ for no reason. Let's change it back.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
It needs a space around '-a'.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
At present we sometimes see problems in gitlab where the environment has
0x80 characters or sequences which are not valid UTF-8.
Avoid this by using bytes for the environment, both internal to buildman
and when writing out the 'env' file. Add a test to make sure this works
as expected.
Reported-by: Marek Vasut <marex@denx.de>
Fixes: e5fc79ea71 ("buildman: Write the environment out to an 'env' file")
Signed-off-by: Simon Glass <sjg@chromium.org>
There have been at least a few cases where an exception has occurred in a
thread and resulted in buildman hanging: running out of disk space and
getting a unicode error.
Handle these by collecting a list of exceptions, printing them out and
reporting failure if any are found. Add a test for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
When used with hierarchical images, use the Chromium OS convention of
adding a section before all the subentries it contains.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use an interator in two of the fmap tests so it is easier to add new
items. Also check the name first since that is the first indication
that something is wrong. Use a variable for the expected size of the
fmap to avoid repeating the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Parse each empty-line-delimited message separately. This saves having to
deal with all the different line content styles, we only care about the
header ERROR | WARNING | NOTE...
Also make checkpatch print line information for a uboot specific
warning.
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Given that we have tests that require pygit2 and it can be installed
like any other python module, fail much more loudly if it is missing.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
At present each invocation of run_steps() updates OUTPUT_FILES_COMMON,
since it does not make a copy of the dict. This is fine for a single
invocation, but for tests, run_steps() is invoked many times.
As a result it may include unwanted items from the previous run, if it
happens that a test runs twice on the same CPU. The problem has not been
noticied previously, as there are few enough tests and enough CPUs that
is is rare for the 'wrong' combination of tests to run together.
Fix this by making a copy of the dict, before updating it. Update the
tests to suit, taking account of the files that are no-longer generated.
With this fix, we no-longer generate files which are not needed for a
particular state of OF_PLATDATA_INST, so the check_instantiate() function
is not needed anymore. It has become dead code and so fails the
code-coverage test (dtoc -T). Remove it.
Signed-off-by: Simon Glass <sjg@chromium.org>
These two tests require an ELF image so that symbol information can be
written into the SPL/TPL binary. At present they rely on other tests
having set it up first, but every test must run independently. This can
cause occasional errors in CI.
Fix this by setting up the required files, as other tests do.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
It's not always desirable to use 'keydir' and some ad-hoc heuristics
to get the filename of the signing key. More often, just passing the
filename is the simpler, easier, and logical thing to do.
Since mkimage doesn't use long options, we're slowly running out of
letters. I've chosen '-G' because it was available.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
mkimage supports rsa2048, and rsa4096 signatures. With newer silicon
now supporting hardware-accelerated ECDSA, it makes sense to expand
signing support to elliptic curves.
Implement host-side ECDSA signing and verification with libcrypto.
Device-side implementation of signature verification is beyond the
scope of this patch.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
fdt_add_bignum() is useful for algorithms other than just RSA. To
allow its use for ECDSA, move it to a common file under lib/.
The new file is suffixed with '-libcrypto' because it has a direct
dependency on openssl. This is due to the use of the "BIGNUM *" type.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
rsa-checksum.c sontains the hash_calculate() implementations. Despite
the "rsa-" file prefix, this function is useful for other algorithms.
To prevent confusion, move this file to lib/, and rename it to
hash-checksum.c, to give it a more "generic" feel.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Skip the processing of *.aml and *.dat files while iterating through the
source in order to process header files.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
strn(cat|cpy) has a bad habit of not nul-terminating the destination,
resulting in constructions like
strncpy(foo, bar, sizeof(foo) - 1);
foo[sizeof(foo) - 1] = '\0';
However, it is very easy to forget about this behavior and accidentally
leave a string unterminated. This has shown up in some recent coverity
scans [1, 2] (including code recently touched by yours truly).
Fortunately, the guys at OpenBSD came up with strl(cat|cpy), which always
nul-terminate strings. These functions are already in U-Boot, so we should
encourage new code to use them instead of strn(cat|cpy).
[1] https://lists.denx.de/pipermail/u-boot/2021-March/442888.html
[2] https://lists.denx.de/pipermail/u-boot/2021-January/438073.html
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Show short arguments along with long arguments in online help:
$ tools/mkeficapsule -h
Usage: mkeficapsule [options] <output file>
Options:
-f, --fit <fit image> new FIT image file
-r, --raw <raw image> new raw image file
-i, --index <index> update image index
-I, --instance <instance> update hardware instance
-K, --public-key <key file> public key esl file
-D, --dtb <dtb file> dtb file
-O, --overlay the dtb file is an overlay
-h, --help print a help message
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Bitmap files should not be executable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Fix the warning by set the variable zero to uint64_t
"warning: ‘write’ reading 5 bytes from a region of size 4"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Integrate the Dockerfile from
https://source.denx.de/u-boot/gitlab-ci-runner.git as of
commit bc6130d572f1 ("Dockerfile: Remove high UID/GID") and introduce a
short rST on how to build the container.
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
This existing code assumes that a reg property is larger than one cell,
but this is not always the case. Fix this assumption.
Also if a node's parent is missing the #address-cells and #size-cells
properties we use 2 as a default for each. But this should not happen in
practice. More likely the properties were removed for SPL due to there
being no 'u-boot,dm-pre-reloc' property, or similar. Add a warning for
this as the failure can be very confusing.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present an empty size is considered to be a 64-bit value. This does not
seem useful and wastes space. Limit the 64-bit detection to where one or
both of the addr/size is two cells or more.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present warnings are shown as soon as they are discovered in the
source scannner. But the function that detects them may be called multiple
times.
Collect all the warnings and show them at the end.
Signed-off-by: Simon Glass <sjg@chromium.org>
The environment may contain some unicode characters. At least that is what
seemed to happen on one commit:
Building current source for 1 boards (0 threads, 64 jobs per thread)
0 0 0 /1 -1 (starting)
Traceback (most recent call last):
File ".../tools/buildman/buildman", line 64, in <module>
ret_code = control.DoBuildman(options, args)
File "tools/buildman/control.py", line 372, in DoBuildman
options.keep_outputs, options.verbose)
File ".../tools/buildman/builder.py", line 1704, in BuildBoards
results = self._single_builder.RunJob(job)
File ".../tools/buildman/builderthread.py", line 526, in RunJob
self._WriteResult(result, job.keep_outputs, job.work_in_output)
File ".../tools//buildman/builderthread.py", line 349, in _WriteResult
print('%s="%s"' % (var, env[var]), file=fd)
UnicodeEncodeError: 'ascii' codec can't encode characters in position
311-312: ordinal not in range(128)
The problem defies repetition with any change at all to buildman. But
let's set an encoding in any case.
Signed-off-by: Simon Glass <sjg@chromium.org>
While we cannot know which commit the warning relates to, this should not
be fatal. Print the warning and carry on.
Signed-off-by: Simon Glass <sjg@chromium.org>
On Arm-based Macs, -no_pie is ignored and gives a linker warning.
Moreover, the build falls over with:
ld: Absolute addressing not allowed in arm64 code but used in '_image_type_ptr_aisimage' referencing '_image_type_aisimage'
for dumpimage and mkimage, since we put data structs in text sections
not data sections and so cannot have dynamic relocations. Instead, move
the sections to __DATA and drop disabling PIE.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add a few more internal checks to make sure offsets are correct, before
updating the dtb.
To make this easier, update the functions which add a property to return
that property,.
Signed-off-by: Simon Glass <sjg@chromium.org>
So far we have only needed to add subnodes to empty notds, so have not
had to deal with ordering. However this feature is needed for binman's
expanded nodes, since there may be another node in the same section.
While libfdt adds new properties after existing properties, it adds new
subnodes before existing subnodes. This means that we must reorder the
nodes in the cached version, so that the ordering remains consistent.
Update the sync implementation to sync existing subnodes first, then
add new ones, then tidy up the ordering in the cached version. Update the
test to cover this behaviour.
Also improve the comment about property syncing while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new test that adds a subnode alongside an existing one, as well as
adding properties to a subnode. This will expand to adding multiple
subnodes in future patches. Put a node after the one we are adding to so
we can check that things sync correctly.
The testAddNode() test should be in the TestNode class since it is a node
test, so move it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Once the tree has been synced, thus potentially moving things around in the
fdt, we set _cached_offsets to False so that a refresh will happen next
time a property is accessed.
This 'lazy' refresh doesn't really save much time, since refresh is a very
fast operation, just a single walk of the tree. Also, having the refresh
happen in the bowels of property access it makes it harder to figure out
what is going on.
Simplify the code by always doing a refresh before and after a sync. Set
_cached_offsets to True immediately after this, in the Refresh() function,
since this makes more sense than doing it in the caller.
Signed-off-by: Simon Glass <sjg@chromium.org>
If a property does not yet have an offset, then that means it exists in
the cache'd fdt but has not yet been synced back to the flat tree. Use
the dirty flag for this so we don't need to check the offset too. Improve
the comments for Prop and Node to make it clear what an offset of None
means.
Also clear the dirty flag after the property is synced.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sometimes it is useful to specify the default alignment for all entries
in a section, such as when word-alignment is necessary, for example. It
is tedious and error-prone to specify this individually for each section.
Add a property to control this for a section.
Signed-off-by: Simon Glass <sjg@chromium.org>
Generally the content of sections is not built until the final assembly
of the image. This is partly to avoid wasting time, since the entries
within sections may change multiple times as binman works through its
various stages. This works quite well since sections exist in a strict
hierarchy, so they can be processed in a depth-first manner.
However the 'collection' entry type does not have this luxury. If it
contains a section within its 'content' list, then it must produce the
section contents, if available. That section is typically a sibling
node, i.e. not part oc the collection's hierarchy.
Add a new 'required' argument to section.GetData() to support this. When
required is True, any referenced sections are immediately built. If this
is not possible (because one of the subentries does not have its data yet)
then an error is produced.
The test for this uses a 'collection' entry type, referencing a section as
its first member. This forces a call to _BuildSectionData() with required
set to False, at first, then True later, when the image is assembled.
Signed-off-by: Simon Glass <sjg@chromium.org>
The vblock entry type includes code to collect the data from a number of
other entries (not necessarily subentries) and concatenating it. This is
a useful feature for other entry types.
Make it a base class, so that vblock can use it, along with other entry
types.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present there is a command-line flag to disable substitution of expanded
entries. Add an option to the entry node as well, so it can be controlled
at the node level.
Add a test to cover this. Fix up the comment to the checkSymbols() function
it uses, while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Many entries start 'Entry containing a'. This looks fine in the source
code but is annoying when viewed in the htmldocs table of contents. Drop
these unnecessary words.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a link to binman's documentation and adjust the files so that it is
accessible. Use the name README.rst so it is easy to discover when binman
is installed without U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
When creating an entry, check for an expanded version of that entry, then
use it instead. This allows, for example use of:
u-boot {
};
instead of having to write out in full:
u-boot {
type = "section";
u-boot-nodtb {
};
u-boot-dtb {
};
};
Add an implementaion of this and associated documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for this feature in the control, image and section modules, so
that expanded entries will be selected by default. So far there are no
expanded entry types, so this is a nop.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new command-line option to disable expanded entries. This is needed
for most tests, since it is much easier to 'factor out' this function into
a separate test and keep the existing packing tests simple.
Add the option and select it by default from tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
As the first step in supporting expanded entries, add a way for binman to
automatically select an 'expanded' version of an entry type, if requested.
This is controlled by a class method.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present, before any entry expansion is done (such as a 'files' entry
expanding out to individual entries for each file it contains), we check
the binman definition (i.e. '/binman' node) to find out what devicetree
files are used in the images.
This is a pain, since the definition may change during expansion. For
example if there is no u-boot-spl-dtb entry in the definition at the start,
we assume that the SPL devicetree is not used. But if an entry later
expands to include this, then we don't notice.
In fact the flexibility provided by the current approach of checking the
definition is not really useful. We know that we can have SPL and TPL
devicetrees. We know the pathname to each, so we can simply check if the
files are present. If they are present, we can prepare them and update
them regardless of whether they are actually used. If they are not present,
we cannot prepare/update them anyway, i.e. an error will be generated.
Simplify state.Prepare() so it uses a hard-coded list of devicetree files.
Note that state.PrepareFromLoadedData() is left untouched, since in that
case we have a complete definition from the loaded file, but cannot of
course rely on the devicetree files that created it still being present.
So in that case we still check the image defitions.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we store an entry as the third field in output_fdt_info[].
This is only used to get the type of the entry. Of course multiple entries
may have this same type. Also the entry type is the key to this dict, so
we can use that instead.
Drop the field and update GetUpdateNodes() to suit. Improve the comment for
output_fdt_info a little while here.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we always use the main devicetree for SPL/TPL as well when
setting up the state. But this it not needed if there is a real devicetree
for SPL or TPL. In fact it confuses things since we cannot distinguish
between one being provided and using the fake one.
Update the code to create the fakes only when requested. Put the mapping
in a constant so we can use it elsewhere.
Rename 'other_fname' to 'fname' while we are here since there is nothing
'other' about it.
Signed-off-by: Simon Glass <sjg@chromium.org>
A few tests declare a type when this can be inferred from the node name.
Drop these lines, since it might cause confusion.
Signed-off-by: Simon Glass <sjg@chromium.org>
This entry holds the padding between the end of of TPL binary and the
end of BSS. This region must be left empty so that the devicetree can be
appended correctly and remain accessible without interfering with BSS.
Signed-off-by: Simon Glass <sjg@chromium.org>
Since this is an execuable we should be able insert symbol values into it.
Add support for this.
Use common code for this test and the original testSymbols. Use hex
consistently for the values and add some more comments.
Signed-off-by: Simon Glass <sjg@chromium.org>
The documentation for this entry indicates that the SPL binary is included
along with the padding. It is not, so update it to correct the error.
Signed-off-by: Simon Glass <sjg@chromium.org>
Several entries currently use an underscore in the entry-type name, but in
fact a hyphen is used. Update the docs to fix this as it might be
confusing.
Also simplify the 'filename' comment and fix the 'operation' typo.
Signed-off-by: Simon Glass <sjg@chromium.org>
Regenerate the entry documentation, which step was missed when the
files-align feature was added.
Fixes: 6eb9932668 ("binman: Support alignment of files")
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the documentation to the base method as it is with other methods.
Also update it a little while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Extracting files to the current directory is not normally a very friendly
thing to do, but it can be warranted, e.g. in a new temporary dir. At
present binman reports an error when such an attempt is made. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present all possible files are generated, even if some of them just
have a header and an empty body. It is better to generate only the files
that are needed, so that the two types of build (based on the setting of
OF_PLATDATA_INST) can be mutually exclusive.
This is intended to fix a strange problem sometimes found with CI:
Building current source for 1 boards (1 thread, 40 jobs per thread)
sandbox: + sandbox_spl
+drivers/built-in.o: In function `dm_setup_inst':
+drivers/core/root.c:135: undefined reference to
`_u_boot_list_2_udevice_2_root'
+dts/dt-uclass.o:(.u_boot_list_2_uclass_2_serial+0x10): undefined
reference to `_u_boot_list_2_udevice_2_serial'
...
This likely happens when switching from !OF_PLATDATA_INST to
OF_PLATDATA_INST since running 'make xxx_defconfig" does not currently
cause any change in which files are generated. With !OF_PLATDATA_INST
the dt-device.c file has no declarations and this is assumed to be the
starting state. The error above seems to indicate that, after changing
to OF_PLATDATA_INST, the dt-uclass.c file is regenerated but the
dt-device.c files is not. This does not seem possible from the relevant
Makefile.spl rule:
u-boot-spl-platdata := $(obj)/dts/dt-plat.o $(obj)/dts/dt-uclass.o
$(obj)/dts/dt-device.o
cmd_dtoc = $(DTOC_ARGS) -c $(obj)/dts -C include/generated all
include/generated/dt-structs-gen.h $(u-boot-spl-platdata_c) &: \
$(obj)/$(SPL_BIN).dtb
@[ -d $(obj)/dts ] || mkdir -p $(obj)/dts
$(call if_changed,dtoc)
It seems that this cannot regenerate dt-uclass.c without dt-device.c since
'dtoc all' is used. So here the trail ends for now.
In any case it seems better to generate files that are uses and not bother
with those that serve no purpose. So update dtoc to do this automatically.
Signed-off-by: Simon Glass <sjg@chromium.org>
We can use extern instead, so let's drop these macros. It adds one more
thing to learn about and doesn't make the code any clearer.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for generating a file containing udevice instances. This
avoids the need to create these at run time.
Update a test uclass to include a 'per_device_plat_auto' member, to
increase test coverage.
Add another tab to the driver_info output so it lines up nicely like the
device-instance output.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for generating a file containing uclass instances. This avoids
the need to create these at run time.
Update a test uclass to include a 'priv_auto' member, to increase test
coverage.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a summary to the top of the generated code, to make it easier to see
what the file contains.
Also add a tab to .plat so that its value lines up with the others.
Signed-off-by: Simon Glass <sjg@chromium.org>
For now dtoc only supports a hard-coded list of phandle properties, to
avoid any situation where it makes a mistake in its determination.
Make this into a constant dict, recording both the phandle property name
and the associated #cells property in the target node. This makes it
easier to find and modify.
Signed-off-by: Simon Glass <sjg@chromium.org>
This file is not used when instantiating devices. Update dtoc to skip
generating its contents and just add a comment instead.
Also it is useful to see the driver name and parent for each device.
Update the file to show that information, to avoid updating the same
tests twice.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add an option to generate the declaration file, which declares all
drivers and uclasses, so references can be used in the code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add an option to instantiate devices at build time. For now this just
parses the option and sets up a few parameters.
Signed-off-by: Simon Glass <sjg@chromium.org>
The device for the root node is normally bound by driver model on init.
With devices being instantiated at build time, we must handle the root
device also.
Add support for processing the root node, which may not have a compatible
string.
Signed-off-by: Simon Glass <sjg@chromium.org>
We only care about uclasses that are actually used. This is determined by
the drivers that use them. Check all the used drivers and build a list of
'valid' uclasses.
Also add references to the uclasses so we can generate C code that uses
them. Attach a uclass to each valid driver.
For the tests, now that we have uclasses we must create an explicit test
for the case where a node does not have one. This should only happen if
the source code does not build, or the source-code scanning fails to find
it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that we have the alias information we can assign a sequence number
to each device in the uclass. Store this in the node associated with each
device.
This requires renaming the sandbox test drivers to have the right name.
Note that test coverage is broken with this patch, but fixed in the next
one.
Signed-off-by: Simon Glass <sjg@chromium.org>
If a driver declaration is included in a comment, dtoc currently gets
confused. Update the parser to only consider declarations that begin at
the start of a line. Since multi-line comments begin with an asterisk,
this avoids the problem.
Signed-off-by: Simon Glass <sjg@chromium.org>
Scan the aliases in the device tree to establish the number of devices
within each uclass, and the sequence number of each.
Signed-off-by: Simon Glass <sjg@chromium.org>
If drivers have the same name then we cannot distinguish them. This only
matters if the driver is actually used by dtoc, but in that case, issue
a warning.
Signed-off-by: Simon Glass <sjg@chromium.org>
Instead of using a separate step for this processing, handle it while
scanning its associated driver. This allows us to drop the code coverage
exception in this case.
Note that only files containing drivers are scanned by dtoc, so aliases
declared in a file that doesn't hold a driver will not be noticed. It
would be confusing to put them anywhere other than in the driver that they
relate to, but update the documentation to say this explicitly, just in
case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Typically dtoc can detect the header file needed for a driver by looking
for the structs that it uses. For example, if a driver as a .priv_auto
that uses 'struct serial_priv', then dtoc can search header files for the
definition of that struct and use the file.
In some cases, enums are used in drivers, typically with the .data field
of struct udevice_id. Since dtoc does not support searching for these,
add a way to tell dtoc which header to use. This works as a macro included
in the driver definition.
Signed-off-by: Simon Glass <sjg@chromium.org>
U-Boot operates in several phases, typically TPL, SPL and U-Boot proper.
The latter does not use dtoc.
In some rare cases different drivers are used for two phases. For example,
in TPL it may not be necessary to use the full PCI subsystem, so a simple
driver can be used instead.
This works in the build system simply by compiling in one driver or the
other (e.g. PCI driver + uclass for SPL; simple_bus for TPL). But dtoc has
no way of knowing which code is compiled in for which phase, since it does
not inspect Makefiles or dependency graphs.
So to make this work for dtoc, we need to be able to explicitly mark
drivers with their phase. This is done by adding an empty macro to the
driver. Add support for this in dtoc.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add logic to assign property values to nodes as required by dtoc. The
references allow nodes to refer to each other in C code. The macros used
by dtoc are not yet defined in driver model. They will be added along
with the actual driver model implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is convenient to attach drivers, etc. to nodes so that we can use the
Node object as the main data structure in this module.
Add a function which adds the new properties, along with documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
These have '_test' suffixes which are not present on the drivers in the
source code. Drop the suffixes to avoid a mismatch when scanning.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is confusing to have the test files in the same places as the
implementation. Move them into a separate directory.
Add a helper function for test_dtoc, to avoid repeating the same
path.
Signed-off-by: Simon Glass <sjg@chromium.org>
Drivers can have private / platform data contained in structs and these
struct definitions are generally kept in header files. In order to
generate build-time devices, dtoc needs to generate code that declares
the data contained in those structs. This generated code must include the
relevant header file, to avoid a build error.
We need a way for dtoc to scan header files for struct definitions. Then,
when it wants to generate code that uses a struct, it can make sure it
includes the correct header file, first.
Add a parser for struct information, similar to drivers. Keep a dict of
the structs that were found.
Signed-off-by: Simon Glass <sjg@chromium.org>
Uclasses can have per-device private / platform data so dtoc needs to
scan these drivers. This allows it to find out the size of this data so
it can be allocated a build time.
Add a parser for uclass information, similar to drivers. Keep a dict of
the uclasses that were found.
Signed-off-by: Simon Glass <sjg@chromium.org>
In order to output variables to hold the priv/plat information used by
each device, dtoc needs to know the struct for each. With this, it can
declare this at build time:
u8 xxx_priv [sizeof(struct <name>)];
Collect the various struct names from the drivers.
Signed-off-by: Simon Glass <sjg@chromium.org>
We should ignore anything in the .git directory or any of the
build-sandbox, etc. directories created by 'make check'. These can confuse
dtoc. Update the code to ignore these.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present most of the tests scan the U-Boot source tree as part of their
run. This information does not change across tests, so we can save time
by remembering it.
Add a way to set up this information and use it for each test, taking a
copy first, so as not to mess up the original.
This reduces the run time from about 1.6 seconds to 1.5 seconds on my
machine. For code coverage (which cannot run in parallel), it reduces from
33 seconds to 5.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we simply record the name of a driver parsed from its
implementation file. We also need to get the uclass and a few other
things so we can instantiate devices at build time. Add support for
collecting this information. This requires parsing each driver file.
Signed-off-by: Simon Glass <sjg@chromium.org>
It's convenient to be able to scroll up in `patman -H`.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Otherwise, values over 127 end up prefixed with ffffff.
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
When a tag is used in a patch subject (e.g. "tag: rest of message") and
it cannot be found as an alias, patman currently reports a fatal error,
unless -t is provided, in which case it reports a warning.
Experience suggest that the fatal error is not very useful. Instead,
default to reporting a warning, with -t tell patman to ignore it
altogether.
Signed-off-by: Simon Glass <sjg@chromium.org>
With the subcommands some of the documentation examples are no-longer
correct. Fix all of them, so it is consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
This patch adds an option which allows setting the device header offset.
This is useful if this tool is used to generate ATF BL2 image of mt7622 for
SD cards.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Use %z when printing size_t values. This avoids errors on 32-bit
machines.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use a conversion to size_t for printing stat.st_size.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Config option ARMADA_39X is never set so remove all dead code hidden under
ifdef CONFIG_ARMADA_39X blocks.
Also remove useless checks for CONFIG_ARMADA_38X define as this macro is
always defined for a38x code path.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
At present even if only a single thread is in use, buildman still uses
threading.
For some debugging it is helpful to do everything in the main process.
Allow -T0 to support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
patman's --limit-cc option parses its argument to an integer and uses
that to trim the list of CC recipients to a particular maximum. but that
only works if the cc variable is a list, which it is not.
Signed-off-by: Bernhard Kirchen <bernhard.kirchen@mbconnectline.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add notes about how to make binman produce verbose logging when building.
Add a comment on how to do this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Since commit c738adb8db ("tool: Move ALIGN_MASK to header as common MACRO")
the i.MX8MQ EVK board no longer boots.
The reason is that imx8mimage.c used a custom __ALIGN_MASK() macro, so
restore the original macro to fix the boot and rename it accordingly.
Reported-by: Lukas Rusak <lorusak@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Ye Li <ye.li@nxp.com>
Fix a missing comma sign (,) from a printf(), that is only
reachable if DEBUG is defined, in which case the build fails with:
tools/mkeficapsule.c:266:36: error: expected ‘)’ before ‘bin’
266 | printf("\tbin: %s\n\ttype: %pUl\n" bin, guid);
| ^~~~
| )
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
At present this function does not accept a size for the FIT. This means
that it must be read from the FIT itself, introducing potential security
risk. Update the function to include a size parameter, which can be
invalid, in which case fit_check_format() calculates it.
For now no callers pass the size, but this can be updated later.
Also adjust the return value to an error code so that all the different
types of problems can be distinguished by the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Bruce Monroe <bruce.monroe@intel.com>
Reported-by: Arie Haenel <arie.haenel@intel.com>
Reported-by: Julien Lenoir <julien.lenoir@intel.com>
The isAlive() method was deprecated in Python 3.8 and has been removed in
Python 3.9. See https://bugs.python.org/issue37804. Use is_alive() instead.
Since Python 2.6 is_alive() has been a synonym for isAlive(). So there
should be no problems for users using elder Python 3 versions.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
binman fixes support for symbols in sub-sections
support for additional cros_ec commands
various minor fixes / tweaks
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmAV6K8RHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreYERgf/QbwOL87yPbf9SyXBQ0EMTmn1ve9HCiv9
yeXrijvA0/wtTVoM44d/z7THb+7Zqw6LbsVOXUSicdGqaogy10xIuz5we0CoGJm6
iwYWV6kaAqjCxDTlSToGnR/TCjiOVgXC6u5QPCZC0LGbAmDbAl4jyCuQxxq2eXYD
hrLSzZPHDe0s2BeWZKRQJ26qyPfWIribXNJXG78/FsvDrdWPPc5K+/ZEb2IWawWR
nEZ8GTEYZpik/niEJ3gFozwCwpJQi3PyukjZvzTGn6tBqg12YXE4dbSzcj48Uj4o
prwUFAGKRR97zFB6c4+NUvd3VBUgPtPdZrtzZ1nNCppiMq1E4BKiDg==
=kijh
-----END PGP SIGNATURE-----
Merge tag 'dm-pull-30jan21' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm
tpm fixes for coral
binman fixes support for symbols in sub-sections
support for additional cros_ec commands
various minor fixes / tweaks
The offset of an entry needs to be adjusted by its skip-at-start value.
This is currently missing when reading entry data. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
When packing files it is sometimes useful to align the start of each file,
e.g. if the flash driver can only access 32-bit-aligned data. Provides a
new property to support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present if a devicetree blob is included in a vblock it does not deal
with updates. This is because the vblock is created once at the start and
does not have a method to update itself later, after all the entry
contents are finalised.
Fix this by adjusting how the vblock is created.
Also simplify Image.ProcessEntryContents() since it effectively duplicates
the code in Section.ProcessContents().
Signed-off-by: Simon Glass <sjg@chromium.org>
Normally when an entry is created, any entry arguments it has are required
to be provided, so it can actually generate its contents correctly.
However when an existing image is read, Entry objects are created for each
of the entries in the image. This happens as part of the process of
reading the image into binman.
In this case we don't need the entry arguments, since we do not intend to
regenerate the entries, or at least not unless requested. So there is no
sense in reporting an error for missing entry arguments.
Add a new property for the Image to handle this case. Update the error
reporting to be conditional on this property.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present binman only supports resolving symbols in the same section as
the binary that uses it. This is quite limited because we often need to
group entries into different sections.
Enhance the algorithm to search the entire image for symbols.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present on large files, lz4 uses a larger block size (e.g. 256KB) than
the 64KB supported by the U-Boot decompression implementation. Also it is
optimised for maximum compression speed, producing larger output than we
would like.
Update the parameters to correct these problems.
Signed-off-by: Simon Glass <sjg@chromium.org>
Miscellaneous fixes in the mkeficapsule utility -- these include a few
resource leak issues flagged by Coverity along with some additional
code improvements suggested by Heinrich during code review.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Fill reserved members of efi_firmware_management_capsule_image_header
structure with zero's for safety.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Fixes: CID 316354
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The UBI_IOCVOLUP ioctl can fail if exclusive access to the volume isn't
obtained. If this happens, the flush operation doesn't return error,
leaving the caller without knowledge of missing flush.
Fix this by forwarding the error (-1) from ubi_update_start().
Fixes: 34255b92e6 ("tools: env: Add support for direct read/write UBI volumes")
Signed-off-by: Martin Hundebøll <martin@geanix.com>
These commands were disabled when CONFIG_FIT_SIGNATURE is disabled, but
they do not depend on crypto support so they can be unconditionally
enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
If CONFIG_FIT_CIPHER is enabled without CONFIG_FIT_SIGNATURE then
mkimage/dumpimage will fail to link:
/usr/bin/ld: tools/common/image-cipher.o: in function `fit_image_decrypt_data':
image-cipher.c:(.text+0x9a): undefined reference to `image_get_host_blob'
/usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x10): undefined reference to `EVP_aes_128_cbc'
/usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x40): undefined reference to `EVP_aes_192_cbc'
/usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x70): undefined reference to `EVP_aes_256_cbc'
/usr/bin/ld: tools/lib/aes/aes-encrypt.o: in function `image_aes_encrypt':
aes-encrypt.c:(.text+0x22): undefined reference to `EVP_CIPHER_CTX_new'
/usr/bin/ld: aes-encrypt.c:(.text+0x6f): undefined reference to `EVP_EncryptInit_ex'
/usr/bin/ld: aes-encrypt.c:(.text+0x8d): undefined reference to `EVP_EncryptUpdate'
/usr/bin/ld: aes-encrypt.c:(.text+0xac): undefined reference to `EVP_CIPHER_CTX_free'
/usr/bin/ld: aes-encrypt.c:(.text+0xf2): undefined reference to `EVP_EncryptFinal_ex'
collect2: error: ld returned 1 exit status
Signed-off-by: Joel Stanley <joel@jms.id.au>
The propoerty sign-images points to images in the configuration
node. But thoses images may references severals "sub-images" (for
example for images loadable). This commit adds the support of
severals sub-images.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
This commit creates a function fit_config_add_hash that will be
used in the next commit to support several 'sub-images'.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
mkimage is only able to package aarch32 binaries. Add support for
AArch64 images.
One can create a ARM64 image using the following command line:
mkimage -T mtk_image -a 0x201000 -e 0x201000 -n "media=emmc;arm64=1"
-d bl2.bin bl2.img
Signed-off-by: Fabien Parent <fparent@baylibre.com>
The existing socfpgaimage always pads the image to the maximum size of
OCRAM size. This will break in the encryption flow where it expects the
image to be un-padded. The encryption tool will do the encryption for
the whole image and append the signature key at end of the image.
The signature key will append to beyond the size of OCRAM if the image
is padded with the maximum size before encryption.
Move the padding step from socfpgaimage to Makefile and pads with objcopy
command.
socfpgaimage will pad the image with 16 bytes aligned (including CRC word),
this is a requirement in encryption flow.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Print image header information if the header is verified.
Example output from mkimage "-l" option:
$ ./tools/mkimage -l spl/u-boot-spl.sfp
Image Type : Cyclone V / Arria V SoC Image
Validation word : 0x31305341
Version : 0x00000000
Flags : 0x00000000
Program length : 0x00003a59
Header checksum : 0x00000188
$ ./tools/mkimage -l spl/u-boot-spl.sfp
Image Type : Arria 10 SoC Image
Validation word : 0x31305341
Version : 0x00000001
Flags : 0x00000000
Header length : 0x00000014
Program length : 0x000138e0
Program entry : 0x00000014
Header checksum : 0x00000237
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
When deleting a variable we must check that the GUID provided by the
user matches the GUID of the variable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
According to https://pep8.org/#indentation we should use 4 spaces per
indentation level.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
When tools: efivar.py is called without arguments an error occurs:
Traceback (most recent call last):
File "tools/efivar.py", line 380, in <module>
main()
File "tools/efivar.py", line 360, in main
args.func(args)
AttributeError: 'Namespace' object has no attribute 'func'
Show the online help if the arguments do not specify a function.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
So far we used the separate mksunxiboot tool for generating a bootable
image for Allwinner SPLs, probably just for historical reasons.
Use the mkimage framework to generate a so called eGON image the
Allwinner BROM expects.
The new image type is called "sunxi_egon", to differentiate it
from the (still to be implemented) secure boot TOC0 image.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
arm64:
- DT updates
microblaze:
- Add support for NOR device support
spi:
- Fix unaligned data write issue
nand:
- Minor code change
xilinx:
- Fru fix in limit calculation
- Fill git repo link for all Xilinx boards
video:
- Add support for seps525 spi display
tools:
- Minor Vitis file support
cmd/common
- Minor code indentation fixes
serial:
- Uartlite debug uart initialization fix
-----BEGIN PGP SIGNATURE-----
iFsEABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX/ROlgAKCRDKSWXLKUoM
IRC5AIkBzg4Sz8fQgdCiOK89k7tdFKMAnA9SYhgm4TSCzffZCJwnm78QoGAC
=4FnY
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2021.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next
Xilinx changes for v2021.04
arm64:
- DT updates
microblaze:
- Add support for NOR device support
spi:
- Fix unaligned data write issue
nand:
- Minor code change
xilinx:
- Fru fix in limit calculation
- Fill git repo link for all Xilinx boards
video:
- Add support for seps525 spi display
tools:
- Minor Vitis file support
cmd/common
- Minor code indentation fixes
serial:
- Uartlite debug uart initialization fix
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
=9kN3
-----END PGP SIGNATURE-----
Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next
Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
Some of these tests don't actually check anything. Add a few more checks
to complete the tests.
Also add a simple scan test that does the basics.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the tests related to scanning into their own class, updating them
to avoid using dtb_platdata as a pass-through.
Signed-off-by: Simon Glass <sjg@chromium.org>
Before expanding the scanning features any more, move this into a separate
file. This will make it easier to maintain in the future. In particular,
it reduces the size of dtb_platdata.py and allows us to add tests
specifically for scanning, without going through that file.
The pieces moved are the Driver class, the scanning code and the various
naming functions, since they mostly depend on the scanning results.
So far there is are no separate tests for src_scan. These will be added
as new functionality appears.
This introduces no functional change.
Signed-off-by: Simon Glass <sjg@chromium.org>
This has not been needed since parent information was added and we started
using indicies for references to other drivers instead of pointers. It was
kept around in the expectation that it might be needed later.
However with the latest updates, it doesn't seem likely that we'll need
this in the foreseeable future.
Drop dm_populate_phandle_data() from dtoc and driver model.
Signed-off-by: Simon Glass <sjg@chromium.org>
Previously we had to worry about nodes being output before those that they
depended on, thus causing build errors. So the current algorithm is
careful to output nodes in the right order.
We now use a different method for outputting phandles that does not
involve pointers. Also we plan to add a 'declarations' header file to
declare all drivers as 'extern'.
Update the code to drop the dependency checking and output in a simple
loop. This makes the output easier to follow since drivers are in order of
thier indices (0, 1, ...), which is also the order it appears in in the
linker list.
Signed-off-by: Simon Glass <sjg@chromium.org>
The base directory of U-Boot, where the source is, it currently calculated
from the directory of the dtb_platdata.py script. If this is installed
elsewhere that will not work. Also it is inconvenient for tests.
Add a parameter to allow specifying this base directory.
To test this, pass a temporary directory with some files in it and check
that they are passed to scan_driver().
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than the if/else construct, update OutputFile with the method to
call to process each command. This is easier to maintain as the number of
commands increases.
Rename generate_tables to generate_plat since it better describes what is
being generated ('plat' is the U-Boot name for platform data).
With this, each output method needs to have the same signature. Store the
output structures in a member variable instead of using parameters, to
accomplish this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use this new name to be consistent with the rest of U-Boot, which talks
about 'plat' for the platform data, which is what this file holds.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is currently fairly obvious what the two generated files are for, but
this will change as more are added. It is helpful for readers to describe
the purpose of each file.
Add a header commment field to OutputFile and use it to generate a comment
at the top of each file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the standard function for running tests and reported results. This
allows the tests to run in parallel, which is a significant speed-up on
most machines (e.g. 4.5 seconds -> 1.5s on mine).
Signed-off-by: Simon Glass <sjg@chromium.org>
This gives a warning in some situations:
File "tools/dtoc/../concurrencytest/concurrencytest.py", line 95,
in do_fork
stream = os.fdopen(c2pread, 'rb', 1)
File "/usr/lib/python3.8/os.py", line 1023, in fdopen
return io.open(fd, *args, **kwargs)
RuntimeWarning: line buffering (buffering=1) isn't supported in binary
mode, the default buffer size will be used
Fix this by dropping the line-buffer parameter.
Signed-off-by: Simon Glass <sjg@chromium.org>
We use the U_BOOT_ prefix (i.e. U_BOOT_DRIVER) to declare a driver but
in every other case we just use DM_. Update the alias macros to use the
DM_ prefix.
We could perhaps rename U_BOOT_DRIVER() to DM_DRIVER(), but this macro
is widely used and there is at least some benefit to indicating it us a
U-Boot driver, particularly for code ported from Linux. So for now, let's
keep that name.
Signed-off-by: Simon Glass <sjg@chromium.org>
This does not get a device (struct udevice *) but a struct driver_info *
so the name is confusing.
Rename it accordingly. Since we plan to have several various of these
macros, put GET at the end instead of the middle, so it is easier to spot
the related macros.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current macro is a misnomer since it does not declare a device
directly. Instead, it declares driver_info record which U-Boot uses at
runtime to create a device.
The distinction seems somewhat minor most of the time, but is becomes
quite confusing when we actually want to declare a device, with
of-platdata. We are left trying to distinguish between a device which
isn't actually device, and a device that is (perhaps an 'instance'?)
It seems better to rename this macro to describe what it actually is. The
macros is not widely used, since boards should use devicetree to declare
devices.
Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is
declaring a new driver_info record, not a device.
Signed-off-by: Simon Glass <sjg@chromium.org>
With upcoming changes, dtoc will output several files for different
of-platdata components.
Add a way to output all ava!ilable files at once ('all'), to the
appropriate directories, without needing to specify each one invidually.
This puts the commands in alphabetical order, so update the tests
accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Implement the 'output directory' feature, allowing dtoc to write the
output files separately to the supplied directories. This allows us to
handle the struct and platdata output in one run of dtoc.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present dtoc writes only a single file on each invocation. U-Boot
writes the two files it needs by separate invocations of dtoc. Since dtoc
now scans all U-Boot driver source, this is fairly slow (about 1 second
per file).
It would be better if dtoc could write all the files at once.
In preparation for this, add a way to specify an output directory for the
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Normally dtoc outputs to a file but it also offers a way to write output
to stdout. At present the test for that does not actually check that the
output is correct. Add this to the test.
This uses a member variable to hold the expected text, so it can be used
in muitiple places.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present dtoc uses '-' internally to mean that output should go to
stdout. This is not necessary and None is more convenient. Update it.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this member holds a simple list of driver names. Update it to
be a dict of DriverInfo, with the name being the key. This will allow more
information to be added about each driver, in future patches.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reduce the length of output_node() futher by moving the struct-output
functionality into a two separate functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is annoying to have this function inside its parent since it makes the
parent longer and hard to read. Move it to the top level.
Signed-off-by: Simon Glass <sjg@chromium.org>
These have crept in again. Update the file to fix all but these ones:
dtb_platdata.py:143:0: R0902: Too many instance attributes (10/7)
(too-many-instance-attributes)
dtb_platdata.py:713:0: R0913: Too many arguments (6/5)
(too-many-arguments)
Signed-off-by: Simon Glass <sjg@chromium.org>
The spl-test4 node deliberately has an invalid compatible string. This
causes a warning from dtoc and the check it does is not really necessary.
Drop it, to avoid the warning and associated confusion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add options for embedding the public key esl(efi signature list) file
to the platform's dtb. The esl file is then retrieved and used for
authenticating the capsule to be used for updating firmare components
on the platform.
The esl file can now be embedded in the dtb by invoking the following
command
mkeficapsule -K <pub_key.esl> -D <dtb>
In the scenario where the esl file is to be embedded in an overlay,
this can be done through the following command
mkeficapsule -O -K <pub_key.esl> -D <dtb>
This will create a node named 'signature' in the dtb, and the esl file
will be stored as 'capsule-key'
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Buildman reuses build directories from previous builds to avoid the cost
of 'make mrproper' for every build. If the previous build produced an SPL
image but the current one does not, the SPL image will remain and buildman
will think it is a result of building the current board.
Remove these files before building, to avoid this problem.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add defaults for FSF/GNU projects, such as gcc, that provide sensible
settings for those projects.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
To enable use of patman with FSF/GNU projects, such as GCC or
Binutils, no Signed-off-by may be added. This adds a command
line flag '--no-signoff' to suppress adding signoffs in patman
when processing commits.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fix patman testBranch() test:
Signed-off-by: Simon Glass <sjg@chromium.org>
As a way of keeping the driver declarations more consistent, add a warning
if the struct used does not end with _priv or _plat.
Signed-off-by: Simon Glass <sjg@chromium.org>
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).
Rename some of the latter variables to end with 'plat' for consistency.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update this file to reduce the number of pylint warnings. Also add a few
missing comments while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update this, mostly to add comments for argument and return types. It is
probably still too early to use type hinting since it was introduced in
3.5.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is useful anymore, since we always want to call chr() in Python 3.
Drop it and adjust callers to use chr().
Also drop ToChars() which is no-longer used.
Signed-off-by: Simon Glass <sjg@chromium.org>
We don't need these now that everything uses Python 3. Remove them and
the extra code in GetBytes() and ToBytes() too.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use an Enum instead of the current ad-hoc constants, so that there is a
data type associated with each 'type' value.
Signed-off-by: Simon Glass <sjg@chromium.org>
The test can run on sandbox build and it attempts to execute a firmware
update via a capsule-on-disk, using a FIT image capsule,
CONFIG_EFI_CAPSULE_FIT.
To run this test successfully, you need configure U-Boot specifically;
See test_capsule_firmware.py for requirements, and hence it won't run
on Travis CI, at least, for now.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
This is a utility mainly for test purpose.
mkeficapsule -f: create a test capsule file for FIT image firmware
Having said that, you will be able to customize the code to fit
your specific requirements for your platform.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
At present if CROSS_COMPILE contains a tilde, such as
~/.buildman-toolchains/gcc-7.3.0-nolibc/i386-linux/bin/i386-linux-gcc
then binman gives a confusing error:
binman: Error 255 running '~/..buildman-toolchains/gcc-7.3.0- ...
Fix this by expanding it out before running the tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a tool to update or insert an Octeon specific header into the U-Boot
image. This is needed e.g. for booting via SPI NOR, eMMC and NAND.
While working on this, move enum cvmx_board_types_enum and
cvmx_board_type_to_string() to cvmx-bootloader.h and remove the
unreferenced (unsupported) board definition.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
The -i option of the dumpimage tool has been removed so it should no
longer be documented in the README file. Refer readers to the tool's
help output rather than maintain a copy of the usage in the README.
Finally, adjust the example dumpfile invocation in imagetool.h to use
the -o option instead of the removed -i option.
Fixes: 12b831879a ("tools: dumpimage: Simplify arguments")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Martyn Welch <martyn.welch@collabora.com>
In the function get_random_data, strerrno is called with
the variable ret (which is the return of the function
clock_gettime). It should be called with errnor. This
commit fixes this mistake.
Reported-by: Coverity (CID: 312956)
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
According to the manpage of rand, it is recommended
to use random instead of rand. This commit updates
the function get_random_data to use random.
Reported-by: Coverity (CID: 312953)
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a commit tag to allow the Patchwork URL to be specified in a commit.
This can be handy for when you submit code to multiple projects but don't
want to use the -p option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add an argument to allow specifying the the patchwork URL. This also adds
this feature to the settings file, either globally, or on a per-project
basis.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new argument to allow the URL of the patchwork server to be
speciified. For now this is hard-coded in the main file, but future
patches will move it to the settings file.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present values from the settings file are only applied to the main
parser. With the new parser structure this means that some settings are
ignored.
Update the implementation to set defaults across the main parser and all
subparsers. Also fix up the comments, since ArgumentParser is being used
now.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present patman tries to assume a default subcommand of 'send', to
maintain backwards compatibility. However it does not cope with
arguments added to the default command, so for example 'patman -t'
does not work.
Update the logic to handle this. Also update the CC command to use 'send'
explicitly, since otherwise patman gets confused with the patch-filename
argument.
Signed-off-by: Simon Glass <sjg@chromium.org>
While reviewing feedback it is helpful to see the review comments on the
command line to check that each has been addressed. Add an option to
support that.
Update the workflow documentation to describe the new features.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for parsing the contents of a patchwork 'patch' web page
containing comments received from reviewers. This allows patman to show
these comments in a simple 'snippets' format.
A snippet is some quoted code plus some unquoted comments below it. Each
review is from a unique person/email and can produce multiple snippets,
one for each part of the code that attracts a comment.
Show the file and line-number info at the top of each snippet if
available.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is tedious to add review tags into the local branch and errors can
sometimes be made. Add an option to create a new branch with the review
tags obtained from patchwork.
Signed-off-by: Simon Glass <sjg@chromium.org>
Before sending out a new version of a series for review, it is important
to add any review tags (e.g. Reviewed-by, Acked-by) collected by
patchwork. Otherwise people waste time reviewing the same patch
repeatedly, become frustrated and stop reviewing your patches.
To help with this, add a new 'status' subcommand that checks patchwork
for review tags, showing those which are not present in the local branch.
This allows users to see what new review tags have been received and then
add them.
Sample output:
$ patman status
1 Subject 1
Reviewed-by: Joe Bloggs <joe@napierwallies.co.nz>
2 Subject 2
Tested-by: Lord Edmund Blackaddër <weasel@blackadder.org>
Reviewed-by: Fred Bloggs <f.bloggs@napier.net>
+ Reviewed-by: Mary Bloggs <mary@napierwallies.co.nz>
1 new response available in patchwork
The '+' indicates a new tag. Colours are used to make it easier to read.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present if we fail to find the upstream then the error output is piped
to wc, resulting in bogus results. Avoid the pipe and check the output
directly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sometimes warnings are associated with a file and sometimes with the
patch as a whole. Update the regular expression to handle both cases,
even in emacs mode. Also add support for detecting new files.
Signed-off-by: Simon Glass <sjg@chromium.org>
These lines can indicate a continuation of an error and should not be
ignored. Fix this.
Fixes: 666eb15e92 ("patman: Handle checkpatch output with notes and code")
Signed-off-by: Simon Glass <sjg@chromium.org>
On balance it is easier to use an iterator here, particularly if we need
to insert lines due to new functionality. The only niggle is the need to
keep the previous iterator value around in one case.
Convert this test to use iter().
Signed-off-by: Simon Glass <sjg@chromium.org>
The current functional tests run most of patman. Add a smaller test that
just checks tag handling with the PatchStream class.
Signed-off-by: Simon Glass <sjg@chromium.org>
If the Series-xxx tag is not recognised patman currently reports a fatal
error. This is inconvenient if a new feature is later added to patman that
an earlier version does not support.
Report a warning instead, to allow the user to take action if needed, but
still allow operation to proceed.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present warnings are produced across the whole set of patches when
parsing them. It is more useful to associate each warning with the patch
(or commit) that generated it.
Attach warnings to the Commit object and move them out of PatchStream.
Also avoid generating duplicate warnings for the same commit.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new function in PatchStream to collect the warnings generated while
parsing the stream. This will allow us to adjust the logic, such as
dealing with per-commit warnings.
Two of the warnings are in fact internal errors, so change them to raise
and exception.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new Series-links tag to tell patman how to find the series in
patchwork. Each item is the series ID optionally preceded by the series
version that the link refers to. An empty version indicates this is the
latest series.
For example:
Series-links: 209816 1:203302
Documentation is added in a later patch.
Signed-off-by: Simon Glass <sjg@chromium.org>
One test still uses its own function for capturing output. Modify it to
use the standard one in test_util
Signed-off-by: Simon Glass <sjg@chromium.org>
This operation was unfortunately broken by a recent change. It is now
necessary to use -i in addition to -n, if there are errors or warnings in
the patches.
Correct this by always showing the summary information.
Fixes: f365375975 ("patman: Move main code out to a control module")
Signed-off-by: Simon Glass <sjg@chromium.org>
A recent change removed the base offset from the calculation. This is
used on coral to find the FSP-S binary. Fix it.
Fixes: a9fad07d4b ("binman: Avoid reporting image-pos with compression")
Signed-off-by: Simon Glass <sjg@chromium.org>
With a recent change this entry stores only part of the section data,
leaving out the padding at the end. Fix this by using GetPaddedData() to
get the data. Add this function to the base Entry class also.
Fixes: d1d3ad7d1f ("binman: Move section padding to the parent")
Signed-off-by: Simon Glass <sjg@chromium.org>
- New PX30 board: Engicam PX30.Core;
- Fix USB HID support for rock960;
- Remove host endianness dependency for rockchip mkimage;
- dts update for rk3288-tinker;
- Enable console MUX for some ROCKPi boards;
- Add config-based ddr selection for px30;
The Rockchip boot ROM expects little-endian values in the image header.
When running mkimage on a big-endian machine, these values need to be
byteswapped before writing or verifying the header.
This change fixes cross-compiling U-Boot SPL for the RK3399 SoC from a
big-endian ppc64 host machine.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Refactor the implementation slightly so that section data is not
rebuilt when it is already available.
We still have GetData() set up to rebuild the section, since we don't
currently track when things change that might affect a section. For
example, if a blob is updated within a section, we must rebuild it.
Tracking that would be possible but is more complex, so it left for
another time.
Signed-off-by: Simon Glass <sjg@chromium.org>
With the previous changes, it is now possible to compress entire
sections. Add some tests to check that compression works correctly,
including updating the metadata.
Also update the documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this function adds up the total size of entries to work out the
size of a section's contents. With compression this is no-longer enough.
We may as well bite the bullet and build the section contents instead.
Call _BuildSectionData() to get the (possibly compressed) contents and
GetPaddedData() to get the same but with padding added.
Note that this is inefficient since the section contents is calculated
twice. Future work will improve this.
This affects testPackOverlapMap() since the error is reported with a
different section size now (enough to hold the contents). Update that at
the same time.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this function assumes that the size of a section is at least as
large as its contents. With compression this is often not the case. Relax
this constraint by using the uncompressed size, if available.
Signed-off-by: Simon Glass <sjg@chromium.org>
This method introduces a separation between packing and checking that is
different for sections. In order to handle compression properly, we need
to be able to deal with a section's size being smaller than the
uncompressed size of its contents. It is easier to make this work if
everything happens in the Pack() method.
The only real user of CheckEntries() is entry_Section and it can call it
directly. Drop the call from 'control' and handle it locally.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present CheckSize() is called from the function that packs the entries.
Move it up to the main Pack() function so that _PackEntries() can just
do the packing.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is only used by entry_Section and that class already calls it. Avoid
calling it twice. Also drop it from the documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present sorting and expanding entries are side-effects of the
CheckEntries() function. This is a bit confusing, as 'checking' would
not normally involve making changes.
Move these steps into the Pack() function instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function just calls CheckEntries() in the only non-trivial
implementation. Drop it and use CheckEntries() directly.
Signed-off-by: Simon Glass <sjg@chromium.org>
When a section is compressed, all entries within it are grouped together
into a compressed block of data. This obscures the start of each
individual child entry.
Avoid reporting bogus 'image-pos' properties in this case, since it is
not possible to access the entry at the location provided. The entire
section must be decompressed first.
CBFS does not support compressing whole sections, only individual files,
so needs no special handling here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Section contents is not set up when ObtainContents() is called, since
packing often changes the layout of the contents. Ensure that the contents
are correctly recorded by making this function regenerate the section. It
is normally only called by the parent section (when packing) or by the
top-level image code, when writing out the image. So the performance
impact is fairly small.
Now that sections have their contents in their 'data' property, update
testSkipAtStartSectionPad() to check it.
Signed-off-by: Simon Glass <sjg@chromium.org>
When compressing an entry, the original uncompressed data is overwritten.
Store it so it is available if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present padding of sections is inconsistent with other entry types, in
that different pad bytes are used.
When a normal entry is padded by its parent, the parent's pad byte is
used. But for sections, the section's pad byte is used.
Adjust logic to always do this the same way.
Note there is still a special case in entry_Section.GetPaddedData() where
an image is padded with the pad byte of the top-level section. This is
necessary since otherwise there would be no way to set the pad byte of
the image, without adding a top-level section to every image.
Signed-off-by: Simon Glass <sjg@chromium.org>
Each section is padded up to its size, if the contents are not large
enough. Move this logic from _BuildSectionData() to
GetPaddedDataForEntry() so that all the padding is in one place.
With this, the testDual test is working again, so enable it.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this function does the padding needed around an entry. It is
easier to understand what is going on if we have a function that returns
the contents of an entry, with padding included.
Refactor the code accordingly, adding a new GetPaddedData() method.
Signed-off-by: Simon Glass <sjg@chromium.org>
Create a new _BuildSectionData() to hold the code that is now in
GetData(), so that it is clearly separated from entry.GetData() base
function.
Separate out the 'pad-before' processing to make this easier to
understand.
Unfortunately this breaks the testDual test. Rather than squash several
patches into an un-reviewable glob, disable the test for now.
This also affects testSkipAtStartSectionPad(), although it still not
quite what it should be. Update that temporarily for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Alignment does form part of the entry once the image is written out, but
within binman the entry contents does not include the padding. Add
documentation to make this clear, as well as a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Padding becomes part of the entry once the image is written out, but
within binman the entry contents does not include the padding. Add
documentation to make this clear, as well as a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Check the contents of each section to make sure it is actually in the
right place.
Also fix a whitespace error in the .dts file.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we use 'compress' as the property to set the compression of
a 'files' entry. But this conflicts with the same property for entries,
of which Entry_section is a subclass.
Strictly speaking, since Entry_files is in fact a subclass of
Entry_section, the files can be compressed individually but also the
section (that contains all the files) can itself be compressed. With this
change, it is possible to express that.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this is only used by blobs. To allow it to be used by other
entry types (such as sections), move it into the base class.
Also read the compression type in the base class.
Signed-off-by: Simon Glass <sjg@chromium.org>
While a section is the base class of Image, it is more correct to refer
to sections in most places in this file. Fix these comments.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present if 'binman' is typed on the command line, a strange error about
a missing argument is displayed. Fix this.
These does not seem to be standard way to add the 'required' argument in
all recent Python versions, so set it manually.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this feature is tested view the end-at-4gb feature. Add some
tests of its own, including the operation of padding.
The third test here shows binman's current, inconsistent approach to
padding in the top-level section. Future patches in this series will
address this.
Signed-off-by: Simon Glass <sjg@chromium.org>
With of-platdata, the devicetree is supposed to specify all the devices
in the system. So far this hasn't really mattered since of-platdata still
works correctly.
However, new of-platdata features rely on numbering the devices in a
particular order so that they can be referenced by a single integer. It is
tricky to implement this efficiently when other devices are present in the
build.
To address this, disable use of U_BOOT_DEVICE() when of-platdata is
enabled. This seems acceptable as it is not supposed to be used at all,
except in SPL/TPL, where of-platdata is the recommended approach.
This breaks one non-compliant boards at present: mx6cuboxi
Signed-off-by: Simon Glass <sjg@chromium.org>
(disable CONFIG_IMX_THERMAL for mx6cuboxi to avoid a build error)
At present we use a 'node' pointer in the of-platadata phandle_n_arg
structs. This is a pointer to the struct driver_info for a particular
device, and we can use it to obtain the struct udevice pointer itself.
Since we don't know the struct udevice pointer until it is allocated in
memory, we have to fix up the phandle_n_arg.node at runtime. This is
annoying since it requires that SPL's data is writable and adds a small
amount of extra (generated) code in the dm_populate_phandle_data()
function.
Now that we can find a driver_info by its index, it is easier to put the
index in the phandle_n_arg structures.
Update dtoc to do this, add a new device_get_by_driver_info_idx() to look
up a device by drive_info index and update the tests to match.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present of-platdata does not provide parent information. But this is
useful for I2C devices, for example, since it allows them to determine
which bus they are on.
Add support for setting the parent correctly, by storing the parent
driver_info index in dtoc and reading this in lists_bind_drivers(). This
needs multiple passes since we must process children after their parents
already have been bound.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present an integer is converted to bytes incorrectly. The whole 32-bit
integer is inserted as the first element of the byte array, and the other
three bytes are skipped. This was not noticed because the unit test did
not check it, and the functional test was checking for wrong values.
Update the code to handle this as a special case. Add one more test to
cover all code paths.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the structures are written in name order, but parents have to
be written before their children, so the file does not end up being in
order. The order of nodes in _valid_nodes matches the order of the
devicetree.
Update the code so that _valid_nodes is in sorted order, by C name of
the structure. This allows us to assign a sequential ordering to each
U_BOOT_DEVICE() declaration.
U-Boot's linker lists are also ordered alphabetically, which means that
the order in the driver_info list will match the order used by dtoc. This
defines an index ('idx') for the U_BOOT_DEVICE declarations. They appear
in alphabetical order, numbered from 0 in _valid_nodes and in the
driver_info linker list.
Add a comment against each declaration, showing the idx value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add documentation to this function as well as generate_structs(), where
the return value is ultimately passed in.
Signed-off-by: Simon Glass <sjg@chromium.org>
When building on a 32bit host the following warning occurs:
tools/image-host.c: In function ‘fit_image_read_data’:
tools/image-host.c:296:56: warning: format ‘%ld’ expects argument of
type ‘long int’, but argument 3 has type ‘__off64_t’
{aka ‘long long int’} [-Wformat=]
printf("File %s don't have the expected size (size=%ld, expected=%d)\n",
~~^
%lld
filename, sbuf.st_size, expected_size);
~~~~~~~~~~~~
tools/image-host.c:311:62: warning: format ‘%ld’ expects argument of
type ‘long int’, but argument 4 has type ‘__off64_t’
{aka ‘long long int’} [-Wformat=]
printf("Can't read all file %s (read %zd bytes, expexted %ld)\n",
~~^
%lld
filename, n, sbuf.st_size);
~~~~~~~~~~~~
Fix the format strings.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
In show_valid_options(), this patch introduces checking whether
a category has an entry ID. If not, adding it to a list for output
is skipped before calling qsort().
This patch will affect all kinds of image header categories
(-A, -C, -O and -T flags).
Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a
System Control Processor, or SCP. ARM Trusted Firmware (ATF)
communicates with the SCP over SCPI to implement the PSCI system
suspend, shutdown and reset functionality. Currently, SCP firmware is
optional; the system will boot and run without it, but system suspend
will be unavailable.
Since all communication with the SCP is mediated by ATF, the only thing
U-Boot needs to do is load the firmware into SRAM. The SCP firmware
occupies the last 16KiB of SRAM A2, immediately following ATF.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Add an entry type for a firmware blob for a System Control Processor,
given by an entry arg. This firmware is a raw binary blob.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Since commit d879616e9e ("spl: fit: simplify logic for FDT loading for
non-OS boots"), the SPL looks at the "os" properties of FIT images to
determine where to append the FDT.
The "os" property of the "firmware" image also determines how to execute
the next stage of the boot process, as in 1d3790905d ("spl: atf:
introduce spl_invoke_atf and make bl31_entry private"). For this reason,
the next stage must be specified in "firmware", not in "loadables".
To support this additional functionality, and to properly model the boot
process, where ATF runs before U-Boot, add the "os" properties and swap
the firmware/loadable images in the FIT image.
Since this description was copied as an example in commit 70248d6a2916
("binman: Support generating FITs with multiple dtbs"), update those
examples as well for correctness and consistency.
Acked-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Due to an extra level of indentation, the "data" property containing the
FDT was being written repeatedly after every other property in the node.
This caused the generated FIT image to be invalid.
Move the block up one level, so the property is added exactly once.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
CONFIG_IS_ENABLED() takes the kconfig name without the CONFIG_ prefix,
e.g. CONFIG_IS_ENABLED(CLK) for CONFIG_CLK. Make including the prefix
an error in checkpatch.pl so calls in the wrong format aren't
accidentally reintroduced.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Binaries may be encrypted in a FIT image with AES. This
algo needs a key and an IV (Initialization Vector). The
IV is provided in a file (pointer by iv-name-hint in the
ITS file) when building the ITB file.
This commits adds provide an alternative way to manage
the IV. If the property iv-name-hint is not provided in
the ITS file, the tool mkimage will generate an random
IV and store it in the FIT image.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
At present MKIMAGE_DTC_PATH is in the devicetree menu but not within
'devicetree control' since it does not relate to that. As a result it
shows up in the top menu.
It actually relates to the mkimage tool, so create a new tools menu for it
and move it there.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add param entry point (ep) support for Arria 10 header. User can pass in
'e' option to mkimage to set the entry point. This is an optional option.
If not specified, default is 0x14.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
In some cases it is useful to include a U-Boot environment region in an
image. This allows the board to start up with an environment ready to go.
Add a new entry type for this. The input is a text file containing the
environment entries, one per line, in the format:
var=value
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The recent support for missing external binaries does not show an error
message when a file is genuinely missing (i.e. it is missing but not
marked as 'external'). This means that when -m is passed to binman, it
will never report a missing file.
Fix this and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When an external blob is missing it can be quite confusing for the user.
Add a way to provide a help message that is shown.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Add a new entry argument to the fit entry which allows selection of the
default configuration to use. This is the 'default' property in the
'configurations' node.
Update the Makefile to pass in the value of DEVICE_TREE or
CONFIG_DEFAULT_DEVICE_TREE to provide this information.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Michal Simek <michal.simek@xilinx.com>
Explain that binman interprets these environment variables in the
"External tools" section to run target/host specific versions of the
tools, and add a new section on how to use CROSS_COMPILE to run the
tests on non-x86 machines.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This patch lets tools.Run() use host-specific versions with the
for_host keyword argument, based on the host-specific environment
variables (HOSTCC, HOSTOBJCOPY, HOSTSTRIP, etc.).
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently, binman always runs the compile tools like cc, objcopy, strip,
etc. using their literal name. Instead, this patch makes it use the
target-specific versions by default, derived from the tool-specific
environment variables (CC, OBJCOPY, STRIP, etc.) or from the
CROSS_COMPILE environment variable.
For example, the u-boot-elf etype directly uses 'strip'. Trying to run
the tests with 'CROSS_COMPILE=i686-linux-gnu- binman test' on an arm64
host results in the '097_elf_strip.dts' test to fail as the arm64
version of 'strip' can't understand the format of the x86 ELF file.
This also adjusts some command.Output() calls that caused test errors or
failures to use the target versions of the tools they call. After this,
patch, an arm64 host can run all tests with no errors or failures using
a correct CROSS_COMPILE value.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
These test files are currently "intended for use on x86 hosts", but most
of the tests using them can still pass when cross-compiled to x86 on an
arm64 host.
This patch enables non-x86 hosts to run the tests by specifying a
cross-compiler via CROSS_COMPILE. The list of variables it sets is taken
from the top-level Makefile. It would be possible to automatically set
an x86 cross-compiler with a few blocks like:
ifneq ($(shell i386-linux-gnu-gcc --version 2> /dev/null),)
CROSS_COMPILE = i386-linux-gnu-
endif
But it wouldn't propagate to the binman process calling this Makefile,
so it's better just raise an error and expect 'binman test' to be run
with a correct CROSS_COMPILE.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This patch makes buildman create linked working trees instead of clones
of the source repository, but keeps updating the older clones of the
repository that might already exist. These worktrees share "everything
except working directory specific files such as HEAD, index, etc." with
the source repository. See the git-worktree(1) manual page for more
information.
If git-worktree isn't available, silently falls back to cloning the
repository.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
In some cases it is useful to generate a FIT which has a number of DTB
images, selectable by configuration. Add support for this in binman,
using a simple iterator and string substitution.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add an entry for ARM Trusted Firmware's 'BL31' payload, which is the
device's main firmware. Typically this is U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we have an Entry_blob_ext which implement a blob which holds an
external binary. We need to support other entry types that hold external
binaries, e.g. Entry_blob_named_by_arg. Move the support into the base
Entry class to allow this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tidy up a few test functions which lack argument comments. Rename one that
has the same name as a different test.
Also fix up the comment for PrepareImagesAndDtbs().
Signed-off-by: Simon Glass <sjg@chromium.org>
If an entry argument is needed by an entry but the entry argument is not
present, then a strange error can occur when trying to read the file.
Fix this by allowing arguments to be required. Select this option for the
cros-ec-rw entry. If a filename is provided in the node, allow that to be
used.
Also tidy up a few related tests to make the error string easier to find,
and fully ignore unused return values.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we look for resources based on the path of the Python module
that wants them. Instead we should use Python's pkg_resources feature
which is designed for this purpose.
Update binman to use this.
Signed-off-by: Simon Glass <sjg@chromium.org>
When reading subentries of each image, the FIT entry type directly
concatenates their contents without padding them according to their
offset, size, align, align-size, align-end, pad-before, pad-after
properties.
This patch makes sure these properties are respected by offloading this
image-data building to the section etype, where each subnode of the
"images" node is processed as a section. Alignments and offsets are
respective to the beginning of each image. For example, the following
fragment can end up having "u-boot-spl" start at 0x88 within the final
FIT binary, while "u-boot" would then end up starting at e.g. 0x20088.
fit {
description = "example";
images {
kernel-1 {
description = "U-Boot with SPL";
type = "kernel";
arch = "arm64";
os = "linux";
compression = "none";
u-boot-spl {
};
u-boot {
align = <0x10000>;
};
};
};
}
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reinstate check in testPadInSections(), squash in
"binman: Allow FIT binaries to have missing external blobs"
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Other relevant properties (pad-after, offset, size, align, align-size,
align-end) already work since Pack() sets correct ranges for subentries'
data (.offset, .size variables), but some padding here is necessary to
align the data within this range to match the pad-before property.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Switch to str.startswith for matching like the FIT etype does since the
current version doesn't ignore 'hash-1', 'hash-2', etc.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
binman fixes for portage
various minor fixes
'bind' command improvements
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl9BbZcRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreZZiQf/UVsriftmxdDz3Lvbz7Jw6UCBXbeM3UN8
KgRxVll3kurZeu8bIcjAPY4YRrbWRqSXmZTXpZWgbyZzHLM4RnkamY3KF3DoxPjc
cbskd/fr4nPjSZVFrkzrvD+D5bhm+VrMtf861AkbAqqpG+Q1FmWHgApqOL1fXn3s
2VoMxRz8Cn9KkSDmxaCtJnLX77GVYYdfgii7RuNWGDqr3eBWrzflV38VbPHLplEg
VLqaLBe3G4zVwElA9Nc2hXpZB84KZEETHcBnmCzNkrSYTN2ofvSeZrWbtRztQFhz
yKur1y7jFsryRkMfxBzgldsKFRNnPT9vr+0qGtrztHjCmvhDkx1YMg==
=iDRJ
-----END PGP SIGNATURE-----
Merge tag 'dm-pull-22aug20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm
replace devfdt_get_addr_ptr() with dev_read_addr_ptr()
binman fixes for portage
various minor fixes
'bind' command improvements
Add a few more file extensions to the list of files that should not be
processed. This avoids unicode errors, for example.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some of these were not converted when binman moved to use absolute paths.
Fix them.
Also drop the import of 'test' which is a directory, not a module.
Signed-off-by: Simon Glass <sjg@chromium.org>
When binman is installed its main program is in a different directory
to its modules. This means that __file__ is different and we cannot use
it to obtain the path to etype/ from main.py
To fix this, move the function to the 'control' module, since it is
installed with all the other modules, including the etype/ directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
The correct order is load address, offset, length. The order was
accidentally switched a while ago; make it match the HAB Blocks output and
what CST expects again.
Fixes: e97bdfa5da ("tools/imximage: share DCD information via Kconfig")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
The external data is located after the mmapped FDT pointed to by
'old_fdt', not in the newly created FDT we are importing into at 'fdt'.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
This patch addresses issue #2 for signed configurations.
-----8<-----
Including the image cipher properties in the configuration signature
prevents an attacker from modifying cipher, key or iv properties.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
Previously, mkimage -F could be run multiple times causing already
ciphered image data to be ciphered again.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
Also replace fdt_delprop/fdt_setprop with fdt_setprop as fdt_setprop can
replace an existing property value.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
Previously mkimage would process any node matching the regex cipher.*
and apply the ciphers to the image data in the order they appeared in
the FDT. This meant that data could be inadvertently ciphered multiple
times.
Switch to processing a single cipher node which exactly matches
FIT_CIPHER_NODENAME.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
The printf() string produces a warning about %d not matching size_t. Fix
it and put the format string on one line to avoid a checkpatch warning.
Signed-off-by: Simon Glass <sjg@chromium.org>
Vagrant Cascadian reported that mx6cuboxi target no longer builds
reproducibility on Debian.
One example of builds mismatches:
00096680: 696e 6700 736f 756e 642d 6461 6900 6465 ing.sound-dai.de
-00096690: 7465 6374 2d67 7069 6f73 0000 tect-gpios..
+00096690: 7465 6374 2d67 7069 6f73 0061 tect-gpios.a
This problem happens because all the buffers in fit_image.c are
allocated via malloc(), which does not zero out the allocated buffer.
Using calloc() fixes this unpredictable behaviour as it guarantees
that the allocated buffer are zero initialized.
Reported-by: Vagrant Cascadian <vagrant@reproducible-builds.org>
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Vagrant Cascadian <vagrant@reproducible-builds.org>
With current implementation of fw_setenv, it is always locks u-boot-env
region if lock interface is implemented for such mtd device. You can
not control lock of this region with fw_setenv, there is no option for
it in config or in application itself. Because of this situation may
happen problems like in this thread on xilinx forum:
https://forums.xilinx.com/t5/Embedded-Linux/Flash-be-locked-after-use-fw-setenv-from-user-space
/td-p/1027851
A short summary of that link is: some person has issue with some spi
chip which has lock interface but doesn't locks properly which leads to
lock of whole flash memory on lock of u-boot-env region. As resulted
solution hack was added into spi-nor.c driver for this chip with lock
disablement.
Instead fix this problem by adding logic to fw_setenv only lock the
flash if it was already locked when we attempted to use it.
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
After latest improvements in dtoc, compatible strings are checked
against driver and driver alias list to get a valid driver name. With
this new feature the list of compatible string aliases seems not
useful any more.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently dtoc checks if the first compatible string in a dtb node
matches either a driver o driver alias name, without taking into account
any other compatible string in the list. In the case that no driver matches
the first compatible string a warning is printed and the U_BOOT_DEVICE is
not being declared correctly.
This patch adds dtoc's support for try all the compatible strings in the
dtb node, in an effort to find the correct driver.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
When binman is in use, most of the targets built by the Makefile are
inputs to binman. We then need a final rule to run binman to produce the
final outputs.
Rename the variable to indicate this, and add a new 'inputs' target.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
It is interesting to note the number of builds completed per second to
track machine performance and build speed. Add a 'rate' value at the end
of the build to show this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This current fails with an error. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 7664b03ffc ("buildman: Remove _of_#_ from results directory paths")
Older versions of this script don't support the -q flag. Since buildman
runs this script from when it starts, we may get the old version.
Fix this in two ways:
1. Use the version from the same tree as buildman is run from, if
available
2. Failing that, allow the -q flag to be missing
Signed-off-by: Simon Glass <sjg@chromium.org>
Add an additional test to dtoc in order improve the coverage,
specifically to take into account the case of unicode error when
scanning drivers.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
With the change to absolute imports the concurrent tests feature
unfortunately broke. Fix it.
We cannot easy add a warning, since the output messes up tests which check
the output.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present testPackX86RomMeNoDesc removes the contents of the
descriptor.bin file and testPackX86RomMeMissingDesc removes the file
completely.
If a test that relies on this file happens to run after it is removed, it
will not work. Since we have no control over the selecting of tests that
run in parallel and series, we must avoid changing the files.
Update this tests to use separate files instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
The user can either count the number of patches, or provide a
tracking branch.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Setting sendemail.suppresscc to all or cccmd leads to --cc-cmd
parameter being ignored, and emails going either nowhere, or
just to the To: line maintainer.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The unsupported Commit-xxx option are silently skipped
and removed as 're_remove=Commit-\w*', this patch adds
warning message in this case to detect misspelled issue
for the 2 supported options:
Commit-notes:
Commit-changes:
For example: the final 's' is missing (Commit-note:)
NB: no issue for Series-xxx option as only the supported
options are accepted (see valid_series in series.py)
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Detect unexpected 'END' line when a section is not detected.
This patch detect issue when tag name for section start is misspelled,
for example 'Commit-note:' for 'Commit-notes:'
Commit-note:
....
END
Then 'Commit-note:' is removed silently by re_remove = "Commit-\w*:"
but 'END' is kept in commit message.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
FIT (Flat Image Tree) is the main image format used by U-Boot. In some
cases scripts are used to create FITs within the U-Boot build system. This
is not ideal for various reasons:
- Each architecture has its own slightly different script
- There are no tests
- Some are written in shell, some in Python
To help address this, add support for FIT generation to binman. This works
by putting the FIT source directly in the binman definition, with the
ability to adjust parameters, etc. The contents of each FIT image come
from sub-entries of the image, as is normal with binman.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a method for adding a property containing arbitrary bytes. Make sure
that the tree can expand as needed in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Normally the FIT timestamp is created the first time mkimage is run on a
FIT, when converting the source .its to the binary .fit file. This
corresponds to using the -f flag. But if the original input to mkimage is
a binary file (already compiled) then the timestamp is assumed to have
been set previously.
Add a -t flag to allow setting the timestamp in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some binary blobs unfortunately obtain their position in the image from
other binary blobs, such as Intel's 'descriptor'. In this case we cannot
rely on packing to work. It is not possible to produce a valid image in
any case, due to the missing blobs.
Allow zero-length overlaps so that this does not cause any problems.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
When warnings and errors are produced by tools they should be written to
stderr. Update the tout implementation to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Sometimes it is useful to build an image even though external binaries are
not present. This allows the build system to continue to function without
these files, albeit not producing valid images.
U-Boot does with with ATF (ARM Trusted Firmware) today.
Add a new flag to binman to request this behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Many of the existing blobs rely on external binaries which may not be
available. Move them over to use blob_ext to indicate this.
Unfortunately cros-ec-rw cannot use this class because it inherits
another. So set the 'external' value for that class.
While we are here, drop the import of Entry since it is not used (and
pylint3 complains).
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to be able to distinguish between ordinary blobs such as
u-boot.bin and external blobs that cannot be build by the U-Boot build
system. If the external blobs are not available for some reason, then we
know that a value image cannot be built.
Introduce a new 'blob-ext' entry type for that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
It is easier and less error-prone to use super() when the parent type is
needed. Update binman to remove the type names.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
As a first step to integrating mkimage into binman, add a new entry type
that feeds data into mkimage for processing and incorporates that output
into the image.
Signed-off-by: Simon Glass <sjg@chromium.org>
When binman is run from 'make check' it is given a toolpath so that the
latest tools (e.g. mkimage) are used. When run manually with no toolpath,
it relies on the system mkimage. But this may be missing or old.
Make some effort to find the built-from-soruce version by looking in the
current directory and in the builds created by 'make check'.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present binman's test coverage runs without a toolpath set. This means
that the system tools will be used. That may not be correct if they are
out of date or missing and this can result in a reduction in test coverage
below 100%.
Provide the toolpath to binman in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that binman uses tools/ as its base directory for importing modules,
the path to the pylibfdt build by U-Boot is incorrect. Fix it with a new
path.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
At present binman outputs errors to stdout which means that fails are
effectively silent when printed by buildman, for example. Fix this by
outputing errors to stderr.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Most users don't want to see traceback errors. Add an option to enable
them for debugging. Disable them by default.
Signed-off-by: Simon Glass <sjg@chromium.org>
Collect response tags such as 'Reviewed-by' while parsing the stream.
This allows us to see what tags are present.
Add a new 'Fixes' tag also, since this is now quite common.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present all text is marked bright, which makes it stand out on the
terminal. Add a way to disable that, as is done with the Color class.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we use --test to indicate that tests should be run. It is
better to use a subcommand for list, like binman. Change it and adjust
the existing code to fit under a 'send' subcommand, the default.
Give this subcommand the same default arguments as the others.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present patman only does one thing so does not have any comments. We
want to add a few more command, so create a sub-parser for the default
command ('send').
Signed-off-by: Simon Glass <sjg@chromium.org>
The -s option allows skipping patches at the top of the branch. Sometimes
there are commits at the bottom that need to be skipped. At present it is
necessary to count the number of commits and then use -c to tell patman
how many to process.
Add a -e option to easily skip a number of commits at the bottom of the
branch.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is convenient to use gitpython to create a real git repo for testing
patman's operation. Add a test for this. So far it just checks that patman
produces the right number of patches for a branch.
Signed-off-by: Simon Glass <sjg@chromium.org>
To make testing easier, move the code out from main into a separate
'control' module and split it into four parts: setup, preparing patches,
checking patches and emailing patches.
Add comments and fix a few code-style issues while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The user can either count the number of patches, or provide a
tracking branch.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Setting sendemail.suppresscc to all or cccmd leads to --cc-cmd
parameter being ignored, and emails going either nowhere, or
just to the To: line maintainer.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The unsupported Commit-xxx option are silently skipped
and removed as 're_remove=Commit-\w*', this patch adds
warning message in this case to detect misspelled issue
for the 2 supported options:
Commit-notes:
Commit-changes:
For example: the final 's' is missing (Commit-note:)
NB: no issue for Series-xxx option as only the supported
options are accepted (see valid_series in series.py)
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Detect unexpected 'END' line when a section is not detected.
This patch detect issue when tag name for section start is misspelled,
for example 'Commit-note:' for 'Commit-notes:'
Commit-note:
....
END
Then 'Commit-note:' is removed silently by re_remove = "Commit-\w*:"
but 'END' is kept in commit message.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
FIT (Flat Image Tree) is the main image format used by U-Boot. In some
cases scripts are used to create FITs within the U-Boot build system. This
is not ideal for various reasons:
- Each architecture has its own slightly different script
- There are no tests
- Some are written in shell, some in Python
To help address this, add support for FIT generation to binman. This works
by putting the FIT source directly in the binman definition, with the
ability to adjust parameters, etc. The contents of each FIT image come
from sub-entries of the image, as is normal with binman.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a method for adding a property containing arbitrary bytes. Make sure
that the tree can expand as needed in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Normally the FIT timestamp is created the first time mkimage is run on a
FIT, when converting the source .its to the binary .fit file. This
corresponds to using the -f flag. But if the original input to mkimage is
a binary file (already compiled) then the timestamp is assumed to have
been set previously.
Add a -t flag to allow setting the timestamp in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some binary blobs unfortunately obtain their position in the image from
other binary blobs, such as Intel's 'descriptor'. In this case we cannot
rely on packing to work. It is not possible to produce a valid image in
any case, due to the missing blobs.
Allow zero-length overlaps so that this does not cause any problems.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
When warnings and errors are produced by tools they should be written to
stderr. Update the tout implementation to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Sometimes it is useful to build an image even though external binaries are
not present. This allows the build system to continue to function without
these files, albeit not producing valid images.
U-Boot does with with ATF (ARM Trusted Firmware) today.
Add a new flag to binman to request this behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Many of the existing blobs rely on external binaries which may not be
available. Move them over to use blob_ext to indicate this.
Unfortunately cros-ec-rw cannot use this class because it inherits
another. So set the 'external' value for that class.
While we are here, drop the import of Entry since it is not used (and
pylint3 complains).
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to be able to distinguish between ordinary blobs such as
u-boot.bin and external blobs that cannot be build by the U-Boot build
system. If the external blobs are not available for some reason, then we
know that a value image cannot be built.
Introduce a new 'blob-ext' entry type for that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
It is easier and less error-prone to use super() when the parent type is
needed. Update binman to remove the type names.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
With the change to absolute imports the concurrent tests feature
unfortunately broke. Fix it.
We cannot easy add a warning, since the output messes up tests which check
the output.
Signed-off-by: Simon Glass <sjg@chromium.org>
As a first step to integrating mkimage into binman, add a new entry type
that feeds data into mkimage for processing and incorporates that output
into the image.
Signed-off-by: Simon Glass <sjg@chromium.org>
When binman is run from 'make check' it is given a toolpath so that the
latest tools (e.g. mkimage) are used. When run manually with no toolpath,
it relies on the system mkimage. But this may be missing or old.
Make some effort to find the built-from-soruce version by looking in the
current directory and in the builds created by 'make check'.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present binman's test coverage runs without a toolpath set. This means
that the system tools will be used. That may not be correct if they are
out of date or missing and this can result in a reduction in test coverage
below 100%.
Provide the toolpath to binman in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that binman uses tools/ as its base directory for importing modules,
the path to the pylibfdt build by U-Boot is incorrect. Fix it with a new
path.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
At present binman outputs errors to stdout which means that fails are
effectively silent when printed by buildman, for example. Fix this by
outputing errors to stderr.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Most users don't want to see traceback errors. Add an option to enable
them for debugging. Disable them by default.
Signed-off-by: Simon Glass <sjg@chromium.org>
Collect response tags such as 'Reviewed-by' while parsing the stream.
This allows us to see what tags are present.
Add a new 'Fixes' tag also, since this is now quite common.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present all text is marked bright, which makes it stand out on the
terminal. Add a way to disable that, as is done with the Color class.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we use --test to indicate that tests should be run. It is
better to use a subcommand for list, like binman. Change it and adjust
the existing code to fit under a 'send' subcommand, the default.
Give this subcommand the same default arguments as the others.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present patman only does one thing so does not have any comments. We
want to add a few more command, so create a sub-parser for the default
command ('send').
Signed-off-by: Simon Glass <sjg@chromium.org>
The -s option allows skipping patches at the top of the branch. Sometimes
there are commits at the bottom that need to be skipped. At present it is
necessary to count the number of commits and then use -c to tell patman
how many to process.
Add a -e option to easily skip a number of commits at the bottom of the
branch.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is convenient to use gitpython to create a real git repo for testing
patman's operation. Add a test for this. So far it just checks that patman
produces the right number of patches for a branch.
Signed-off-by: Simon Glass <sjg@chromium.org>
To make testing easier, move the code out from main into a separate
'control' module and split it into four parts: setup, preparing patches,
checking patches and emailing patches.
Add comments and fix a few code-style issues while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a new error message in case the size of data written
are shorter than the one expected.
Currently, it will lead to the following error message:
"mkimage: Write error on uImage: Success"
This is not explicit when the error is because the device
doesn't have enough space. Let's use a more understandable message:
"mkimage: Write only 4202432/4682240 bytes, probably no space left on the device"
Signed-off-by: Mylène Josserand <mylene.josserand@collabora.com>
Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
The start of an ACPI path typically has backslashes in it. These are not
preserved during the translation from device tree to C code, since dtc
(correctly) uses the first backslash as an escape character, and dtoc
therefore leaves it out of the C string.
Fix this with special-case handling.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a test for dtoc taking into account the cd-gpios property.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently dtoc does not support the property cd-gpios used to declare
the gpios for card detect in mmc.
This patch adds support to cd-gpios property.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
In the current implementation, when dtoc parses a dtb to generate a struct
platdata it converts the information related to linked nodes as pointers
to struct platdata of destination nodes. By doing this, it makes
difficult to get pointer to udevices created based on these
information.
This patch extends dtoc to use struct driver_info when populating
information about linked nodes, which makes it easier to later get
the devices created. In this context, reimplement functions like
clk_get_by_index_platdata() which made use of the previous approach.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
As dtoc now performs checks for valid driver names, when running dtoc
tests several warnings arise as these tests don't use valid driver
names.
This patch adds an option to disable those warning, which is only
intended for running tests.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently dtoc scans dtbs to convert them to struct platdata and
to generate U_BOOT_DEVICE entries. These entries need to be filled
with the driver name, but at this moment the information used is the
compatible name present in the dtb. This causes that only nodes with
a compatible name that matches a driver name generate a working
entry.
In order to improve this behaviour, this patch adds to dtoc the
capability of scan drivers source code to generate a list of valid driver
names and aliases. This allows to generate U_BOOT_DEVICE entries using
valid driver names and rise a warning in the case a name is not valid.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Open files in utf-8 mode:
Signed-off-by: Simon Glass <sjg@chromium.org>
Add missing information about internal class members in order to make
the code easier to follow.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Collect the 'checkpatch type' from each error, warning and check. Provide
this to patman and update the uclass test to use it.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is quite likely that the number of U-Boot-specific tests in
checkpatch.pl will increase over time. We should have tests for these to
avoid undefined behaviour and bugs being introduced, which might cause
people to ignore the warnings.
Add a simple new class that can generate a patch with a single-line
addition in it. Use that to add a test for one of the checkpatch checks.
Signed-off-by: Simon Glass <sjg@chromium.org>
These tests check checkpatch.pl operation and can server as our tests for
the U-Boot-specific updates to that script. Rename the file and update
comments to indicate this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This module doesn't need to import itself. It causes problems on
very old Python 3 (e.g. 3.4.0). Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Pass this module in so that settings does not need to import it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Stefan Bosch <stefan_b@posteo.net>
Adjust the get_maintainer module to accept a list of directories to search
for the script. This avoids needing to import gitutil.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Stefan Bosch <stefan_b@posteo.net>
Only a few members of this class are used and only in a test. To avoid
importing the module, convert the test to use a dict.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Stefan Bosch <stefan_b@posteo.net>
This seems to cause problems in some cases. Split the dependency by
copying the code to command.
Reported-by: Stefan Bosch <stefan_b@posteo.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
A large number of changes have happened upstream since our last sync
in commit 65e05ddc1a ("kconfiglib: Update to the 12.14.0 release").
The big motivation for this sync is support for user defined macros
within Kconfig.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
- Makefile: add rule to build an endian-swapped U-Boot image
used by MIPS Malta EL variants
- CI: add Qemu tests for MIPS Malta
-----BEGIN PGP SIGNATURE-----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=dnTK
-----END PGP SIGNATURE-----
Merge tag 'mips-pull-2020-06-29' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next
- net: pcnet: cleanup and add DM support
- Makefile: add rule to build an endian-swapped U-Boot image
used by MIPS Malta EL variants
- CI: add Qemu tests for MIPS Malta
This can be used to swap the byte endianness of a binary file
from Little-Endian to Big-Endian or vice-versa.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
When authenticating the initial boot binary the ROM will check a debug
type value in the certificate and based on that open JTAG access to that
core. This only effects HS devices as non-HS device ROM allows JTAG
by default.
This can be useful for HS developers working in the early boot stage,
before SYSFW is loaded. After that point the JTAG access can be
changed based on board configurations passed to SYSFW.
This access can also be a large security problem as JTAG access on
HS devices can be used to circumvent the chain-of-trust controls.
Accidentally leaving this open defeats the security on HS, due to this
change the default to disabled.
This should only effect those working on early HS boot code, which
is a limited crowd who will already know how to re-enable this access
as needed.
Signed-off-by: Andrew F. Davis <afd@ti.com>
When authenticating the initial boot binary the ROM will check a debug
type value in the certificate and based on that open JTAG access to that
core.
Make this selectable in the signing tool to allow it to be enabled or
disabled based on user command line input.
This does not change the default behavior.
Signed-off-by: Andrew F. Davis <afd@ti.com>
change to how sequence numbers are assigned to devices
minor fixes and improvements
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl7kQ4kRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreZrvAgAqc/TEj7QHPyW9rQSl8h65MXK93qRsnZo
4segKEtK0Rmv0S2VfmPCwujsDFl5gZUNt+rXD/l7F0a4Wzx4eYgYrEXOYsXs/ZHP
jjGrcbvO4Qkx3QzjMqqoUiQqeCgNQ9XIre8F+1NmZeQ2bFtPKbJXtXKYTcMI1wSW
PhRGbbsTnKNKC0dL0nLFG6+NC/sk6xRqMx28Ip38FTrQL+Uh67LZFpLkY3yuHo/1
CVhCw+7Aov0I6tDrdKrngjFqXRSoTsuOhavSFoW9U6llqDL7FIC6aoRo7x24lSJN
VFTRpXPmNHeslE6NHEOQs9elFpbxXR34te3k4p74rFuX/J/490UaYA==
=172C
-----END PGP SIGNATURE-----
Merge tag 'dm-pull-12jun20' of git://git.denx.de/u-boot-dm into next
patman improvements to allow it to work with Zephyr
change to how sequence numbers are assigned to devices
minor fixes and improvements
The current recommendation for best security practice from the US government
is to use SHA384 for TOP SECRET [1].
This patch adds support for SHA384 and SHA512 in the hash command, and also
allows FIT images to be hashed with these algorithms, and signed with
sha384,rsaXXXX and sha512,rsaXXXX
The SHA implementation is adapted from the linux kernel implementation.
[1] Commercial National Security Algorithm Suite
http://www.iad.gov/iad/programs/iad-initiatives/cnsa-suite.cfm
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
Currently, the following scenario will rebuild the first commit even
though it is not really necessary - the commit sha or the position in the
patchset did not change:
$ git am <local-patch-0001>
$ tools/buildman/buildman -P -E -W -b master mx6
<do some more development work>
$ git am <local-patch-0002>
$ tools/buildman/buildman -P -E -W -b master mx6 <- will rebuild the first
commit as well, even
though nothing has
changed about it.
This is due to the fact that previous results directories get removed
when the number of commits change. By removing the _of_#_ part of the
directory path, the commits will be rebuilt only if the commit sha or the
position in the patchset changes. Also, update the testcase to reflect this
change.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Rather than suffering in silence, output a warning if something about the
checkpatch output cannot be understood.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sometimes checkpatch outputs problems in the patch subject. Add support
for parsing this output and reporting it correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
If checkpatch is configured to output code we should ignore it. Similarly,
notes should be ignored.
Update the logic to handle these situations.
Signed-off-by: Simon Glass <sjg@chromium.org>
Once we have determined what the line refers to there is no point in
processing it further. Update the logic to continue to the next line in
these cases.
Signed-off-by: Simon Glass <sjg@chromium.org>
If checkpatch is run in 'emacs' mode it shows the filename at the
start of each line. Add support for this so that the warnings and errors
are correctly detected.
Signed-off-by: Simon Glass <sjg@chromium.org>
If no warnings are detected due to checkpatch having unexpected options,
patman currently shows an error:
TypeError: unsupported operand type(s) for +=: 'int' and 'property'
Fix this by initing the variable correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
This option currently does not add any sort of hash to the images in the
FIT.
Add a hash node requesting a crc32 checksum, which at least provides some
protection.
The crc32 value is easily ignored (e.g. in SPL) if not needed. and takes
up only about 48 bytes per image, including overhead.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Denk <wd@denx.de>
When using CONFIG_ENV_IS_IN_FAT and the config-file specifies a size
larger than what U-Boot wrote into the env-file, a confusing error
message is shown:
$ fw_printenv
Read error on /boot/uboot.env: Success
Fix this by showing a different error message when read returns too
little data.
Signed-off-by: Harald Seiler <hws@denx.de>
This patch adds or modifies functional tests for the Cover-changes,
Commit-changes, and Series-process-log tags in order to account for new
behavior added in the previous few patches. The '(no changes since v1)'
case is not tested for, since that would need an additional commit to test
in addition to testing the existing code paths.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This patch adds support to multi-line changes. That is, if one has a line
in a changelog like
- Do a thing but
it spans multiple lines
Using Series-process-log sort would sort as if those lines were unrelated.
With this patch, any change line starting with whitespace will be
considered part of the change before it.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
By default patman generates a combined changelog for the cover letter. This
may not always be desirable.
Many patches may have the same changes. These can be coalesced with
"Series-process-log: uniq", but this is imperfect. Similar changes like
"Move foo to patch 7" will not be merged with the similar "Move foo to this
patch from patch 6".
Changes may not make sense outside of the patch they are written for. For
example, a change line of "Add check for bar" does not make sense outside
of the context in which bar might be checked for. Some changes like "New"
or "Lint" may be repeated many times throughout different change logs, but
carry no useful information in a summary.
Lastly, I like to summarize the broad strokes of the changes I have made in
the cover letter, while documenting all the details in the appropriate
patches. I think this makes it easier to get a good feel for what has
changed, without making it difficult to wade through every change in the
whole series.
This patch adds two new tags to add changelog entries which only appear in
the cover letter, or only appear in the commit. Changes documented with
"Commit-changes" will only appear in the commit, and will not appear in the
cover letter. Changes documented with "Cover-changes" will not appear in
any commit, and will only appear in the cover letter.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patman outputs a line for every edition of the series in every patch,
regardless of whether any changes were made. This can result in many
redundant lines in patch changelogs, especially when a patch did not exist
before a certain revision. For example, the existing behaviour could result
in a changelog of
Changes in v7: None
Changes in v6: None
Changes in v5:
- Make a change
Changes in v4: None
Changes in v3:
- New
Changes in v2: None
With this patch applied and with --no-empty-changes, the same patch would
look like
(no changes since v5)
Changes in v5:
- Make a change
Changes in v3:
- New
This is entirely aesthetic, but I think it reduces clutter, especially for
patches added later on in a series.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Some mailing lists have size limits and when we add binary contents
to our patches it's easy to exceed the size limits.
Git supports a command line option "--no-binary" to generate patches
without any binary contents. Add an option in patman to handle this.
Note with this option patches cannot be applied properly, but they
are still useful for code review.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sort the existing command line options by:
- help comes first
- option starts with '-'
- option starts with '--'
Lower case followed by upper case letters, in alphabetical order.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
As reported by Nicolas Carrier on the Buildroot mailing list [1],
there is a new build issue while building a program which interacts with
the u-boot environment. This program uses the headers of the ubootenv
library provided by uboot-tools.
This is a recent change from uboot [2] adding "#include <env.h>" to
fw_env.h. Adding env.h require a board configuration to build since
it also include compiler.h (and others uboot internal includes).
env.h include seems not needed since env_set() is not used in fw_env tool.
Nicolas removed env.h from fw_env tool and fixed it's build issue.
This problem is present since uboot v2019.10.
[1] http://lists.busybox.net/pipermail/buildroot/2020-April/280307.html
[2] 9fb625ce05
Reported-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Building with -Wtype-limits yields
tools/rkcommon.c: In function ‘rkcommon_check_params’:
tools/rkcommon.c:158:27: warning: comparison of
unsigned expression < 0 is always false [-Wtype-limits]
158 | if (spl_params.init_size < 0)
| ^
tools/rkcommon.c:165:28: warning: comparison of
unsigned expression < 0 is always false [-Wtype-limits]
165 | if (spl_params.boot_size < 0)
|
Fix the value checks.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.
Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.
This requires quite a few header-file additions.
Signed-off-by: Simon Glass <sjg@chromium.org>
GCC recognizes /* fallthrough */ if -Wimplicit-fallthrough=3 is enabled.
Let's use it consistently.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
GCC recognizes /* fallthrough */ if -Wimplicit-fallthrough=3 is enabled.
Let's use it consistently.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Have this symbol follow the pattern of all other such symbols.
This patch also removes a TODO from the code.
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
This has been reported to break booting of U-Boot from SPL on a number
of platforms due to a lack of alignment of the external data. The
issues this commit is addressing will need to be resolved another way.
Re-introduce a data leak in the padding for now.
This reverts commit 20a154f95b.
Reported-by: Alex Kiernan <alex.kiernan@gmail.com>
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
There is no reason to tail-pad fitImage with external data to 4-bytes,
while fitImage without external data does not have any such padding and
is often unaligned. DT spec also does not mandate any such padding.
Moreover, the tail-pad fills the last few bytes with uninitialized data,
which could lead to a potential information leak.
$ echo -n xy > /tmp/data ; \
./tools/mkimage -E -f auto -d /tmp/data /tmp/fitImage ; \
hexdump -vC /tmp/fitImage | tail -n 3
before:
00000260 61 2d 6f 66 66 73 65 74 00 64 61 74 61 2d 73 69 |a-offset.data-si|
00000270 7a 65 00 00 78 79 64 64 |ze..xydd|
^^ ^^ ^^
after:
00000260 61 2d 6f 66 66 73 65 74 00 64 61 74 61 2d 73 69 |a-offset.data-si|
00000270 7a 65 00 78 79 |ze.xy|
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Tom Rini <trini@konsulko.com>
The cmdline for calling the dtc was cut-off when using long filenames (e.g.
245 bytes) for output-file and datafile of "-f" parameter.
For FIT-images cmd[MKIMAGE_MAX_DTC_CMDLINE_LEN] is declared (hardcoded 512 bytes),
and contains some static values, the path of a tmpfile and a datafile. tmpfile is
max MKIMAGE_MAX_TMPFILE_LEN (256) and datafile might be also this size. Having two
very long pathname results in a truncation os the executed shell command, as the
truncated datafile path will not be found.
Redefine MKIMAGE_MAX_DTC_CMDLINE_LEN to "2 * MKIMAGE_MAX_TMPFILE_LEN + 35 for the
parameters.
This likely applies to the "-d" parameter, too.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Minor buildman fixes for new features
Make libfdt code more similar to upsteam
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl6mTJMRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreZRmAf/TeHuh9nWXr7jRAyl8YEaXfBablceBYF/
l/bHpIyPy1NH5wRMB1kwGIZUydSM44/FIVnvlo1iVI0DVuO1cSIY98WM2waMP0Tk
WiDg3XR7eMpTMNjG13KP6TrFG5ybfOopRYdpuUfjPTBm8RQyuFMziaQwOrDQdoXt
9yQ8rzM6hB7Gj3LgORond04KZYRUcYC+uhcuDo8WPUjrqS8vSpeAG34n6lT4z9KG
BdmhQuIybvCngdi/t9ovyTfq5UfIsXp0ngUN6My/j0IjykZT4nu6qllge8gcukCM
3iqrqhcjkO9psPdk6NXf2akTdxDH4Mf8PqFbvqmABNQbDSEVinVnrA==
=H2KE
-----END PGP SIGNATURE-----
Merge tag 'dm-pull-27apr20' of git://git.denx.de/u-boot-dm
Move Python tools to use absolute paths
Minor buildman fixes for new features
Make libfdt code more similar to upsteam
We have a board with several revisions. The older ones use a nor flash
with 64k erase size, while the newer have a flash with 4k sectors. The
environment size is 8k.
Currently, we have to put a column containing 0x10000 (64k) in
fw_env.config in order for it to work on the older boards. But that
ends up wasting quite a lot of time on the newer boards that could
just erase the 8k occupied by the environment - strace says the 64k
erase takes 0.405 seconds. With this patch, as expected, that's about
an 8-fold better, at 0.043 seconds.
Having different fw_env.config files for the different revisions is
highly impractical, and the correct information is already available
right at our fingertips. So use the erasesize returned by the
MEMGETINFO ioctl when the fourth and fifth columns (sector size and
#sectors, respectively) are absent or contain 0, a case where the
logic previously used to use the environment size as erase size (and
consequently computed ENVSECTORS(dev) as 1).
As I'm only testing this on a NOR flash, I'm only changing the logic
for that case, though I think it should be possible for the other
types as well.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Now that we are using absolute paths we can remove some of the sys.path
mangling that appears in the tools.
We only need to add the path to 'tools/' so that everything can find
modules relative to that directory.
The special paths for finding pylibfdt remain.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present patman sets the python path on startup so that it can access
the libraries it needs. If we convert to use absolute imports this is not
necessary.
Move patman to use absolute imports. This requires changes in tools which
use the patman libraries (which is most of them).
Signed-off-by: Simon Glass <sjg@chromium.org>
At present binman sets the python path on startup so that it can access
the libraries it needs. If we convert to use absolute imports this is not
necessary.
Move binman to use absolute imports. This enables removable of the path
adjusting in Entry also.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present buildman sets the python path on startup so that it can access
the libraries it needs. If we convert to use absolute imports this is not
necessary.
Move buildman to use absolute imports. Also adjust moveconfig.py too since
it uses some buildman modules and cannot work without this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Python does not like the module name being the same as the module
directory. To allow buildman modules to be used from other tools, rename
it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Python does not like the module name being the same as the module
directory. To allow dtoc modules to be used from other tools, rename
it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Python does not like the module name being the same as the module
directory. To allow buildman modules to be used from other tools, rename
it.
Signed-off-by: Simon Glass <sjg@chromium.org>
This script already works with Python 3. Make it use that by default so
that it can import the patman libraries.
Signed-off-by: Simon Glass <sjg@chromium.org>
Python does not like the module name being the same as the module
directory. To allow patman modules to be used from other tools, rename
it.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present buildman does not write its own output files (err, done, the
environment) when using -w. However this is useful for when the build is
run with -s to check it.
In fact ProduceResultSummary() reads the result from those files rather
than using the 'result' info directly. So ProcessResult() does not work
with -w at present. It does not print any output.
Fix this by writing output files even when -w is used.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the environment used by U-Boot is written to the 'env'
directory. This is fine when the output directory is not the same as the
source directory, but when it is (as with -w) it conflicts with the source
directory of the same name.
Rename 'env' to 'out-env' to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is a bad idea to use the default output directory ('..') with -w since
it does a build in that directory and writes various files these.
Require that -o is given to avoid this problem.
Signed-off-by: Simon Glass <sjg@chromium.org>
fdt_region APIs are not part of libfdt. They are U-Boot extension
for the verified boot. Split the declarations related to fdt_region
out of <fdt_region.h>. This allows <linux/libfdt.h> to become a
simple wrapper file, like Linux does.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
My goal is to sync lib/libfdt/ with scripts/dtc/libfdt/, that is,
make lib/libfdt/ contain only wrapper files.
fdt_region.c was written only for U-Boot to implement the verified
boot. So, this belongs to the same group as common/fdt_support.c,
which is a collection of U-Boot own fdt helpers.
Move lib/libfdt/fdt_region.c to common/fdt_region.c . This is
necessary only when CONFIG_(SPL_TPL_)_FIT_SIGNATURE is enabled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is no essential difference between scripts/dtc/libfdt/fdt_ro.c
and lib/libfdt/fdt_ro.c
Migrate to a simple wrapper like the other files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If given ptr to free() is NULL, no operation is performed.
Hence we can just free buf directly in fit_extract_data().
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Without calling munmap(), the follow-up call to open() the same file
with a flag O_TRUNC seems not to cause any issue on Linux, but it fails
on Windows with error like below:
Can't open kernel_fdt.itb.tmp: Permission denied
Fix this by unmapping the memory before closing fd in fit_import_data().
Signed-off-by: Lihua Zhao <lihua.zhao@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
MinGW build for U-Boot tools has been broken for years. The official
support of Windows build is now MSYS2. Remove the MinGW support codes.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
When building on a 32bit host the following warning occurs:
tools/image-host.c: In function ‘fit_image_read_data’:
tools/image-host.c:310:42: warning: format ‘%ld’ expects argument of type
‘long int’, but argument 3 has type ‘ssize_t’ {aka ‘int’} [-Wformat=]
printf("Can't read all file %s (read %ld bytes, expexted %ld)\n",
~~^
%d
filename, n, sbuf.st_size);
~
n is of type ssize_t so we should use %zd for printing.
Fixes: 7298e42250 ("mkimage: fit: add support to encrypt image with aes")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
The image is usually stored in block device like emmc, SD card, make the
offset of image data aligned to block(512 byte) can avoid data copy
during boot process.
eg. SPL boot from FIT image with external data:
- SPL read the first block of FIT image, and then parse the header;
- SPL read image data separately;
- The first image offset is the base_offset which is the header size;
- The second image offset is just after the first image;
- If the offset of imge does not aligned, SPL will do memcpy;
The header size is a ramdon number, which is very possible not aligned, so
add '-B size'to specify the align size in hex for better performance.
example usage:
./tools/mkimage -E -f u-boot.its -B 0x200 u-boot.itb
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Tom Rini <trini@konsulko.com>
Use the ALIGN() for size align so that the code is more readable.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The align for fit_size has been done twice, remove the first one for it
does not make any sense.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Tom Rini <trini@konsulko.com>
The ALIGN() is now available at imagetool.h, migrate to use it.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
The ALIGN() is now available at imagetool.h, migrate to use it.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Tom Rini <trini@konsulko.com>
The ALIGN() is available at imagetool.h, no need to self define one.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Tom Rini <trini@konsulko.com>
The ALIGN code is need by many files who need handle structure or image
align, so move the macro to imagetool.h file.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Tom Rini <trini@konsulko.com>
The current exit codes of 128 and 129 are useful in that they do not
conflict with those returned by tools, but they are not actually valid.
It seems better to pick some codes which work with 'bit bisect run'.
Update them to 100 (for errors) and 101 (for warnings).
Signed-off-by: Simon Glass <sjg@chromium.org>
These are becoming more common now. They cause boards to show warnings
which can be mistaking for compiler warnings.
Add a buildman option to ignore them. This option works only with the
summary option (-s). It does not affect the build process.
Signed-off-by: Simon Glass <sjg@chromium.org>
Unfortunately the plague of device-tree warnings has not lifted. These
warnings infiltrate almost every build, adding noise and confusion.
Add a buildman option to ignore them. This option works only with the
summary option (-s). It does not affect the build process.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present buildman defaults to running 'mrproper' on every thread before
it starts building commits for each board. This can add a delay of about 5
seconds to the start of the process, since the tools and other invariants
must be rebuilt.
In particular, a build without '-b', to build current source, runs much
slower without -I, since any existing build is removed, thus losing the
possibility of an incremental build.
Partly this behaviour was to avoid strange build-system problems caused by
running 'make defconfig' for one board and then one with a different
architecture. But these problems were fixed quite a while ago.
The -I option (which disabled mrproper) was introduced four years ago and
does not seem to cause any problems with builds.
So make -I the default and deprecate the option. To allow use of
'mrproper', add a new -m flag.
Signed-off-by: Simon Glass <sjg@chromium.org>
When buildman finishes it leaves the last summary line visible, which
shows the number of successful builds, builds with warnings and builds
with errors.
It is useful also to see how many builds were done in total along with
the time taken. Show these on a separate line before buildman finishes.
Signed-off-by: Simon Glass <sjg@chromium.org>
If a progress message is longer than the terminal line it will scroll the
terminal. Limit the messages to the terminal width.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is nice to see the actual number of builds remaining to complete. Add
this in the progress message, using a different colour.
Drop the unnecessary 'name' variable while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The commit counter is a hangover from when buildman processed each board
for a commit. Now buildman processes each commit for a board, so this
output is never triggered.
Delete it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fetching updated versions of a repo can take time. At present buildman
gives no indication that it is doing this.
Add a message to explain the delay.
Tidy up a few other messages while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
