2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-29 22:43:10 +00:00
Commit graph

67769 commits

Author SHA1 Message Date
Patrick Delaunay
06f624f28c board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setup
Use IS_ENABLED to prevent ifdef in ft_board_setup.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:49 +02:00
Patrick Delaunay
ebfd592f16 board: stm32mp1: use IS_ENABLED to prevent ifdef in env functions
Use IS_ENABLED to prevent ifdef in env functions:
- env_get_location
- env_ext4_get_intf
- mmc_get_env_dev

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:49 +02:00
Patrick Delaunay
72b099897a board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_init
Use IS_ENABLED to prevent ifdef in board_late_init.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:49 +02:00
Patrick Delaunay
e817c8eca5 board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fix
Use IS_ENABLED to prevent ifdef in dk2_i2c1_fix.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:49 +02:00
Patrick Delaunay
75f9b190e4 board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf
Use CONFIG_IS_ENABLED to prevent ifdef in set_dfu_alt_inf.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:49 +02:00
Patrick Delaunay
3434bbe698 board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_init
Use IS_ENABLED to prevent ifdef in sysconf_init.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:49 +02:00
Patrick Delaunay
feb6179ffe board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power
Use IS_ENABLED to prevent ifdef in board_check_usb_power.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:49 +02:00
Patrick Delaunay
6a8713bbe3 board: stm32mp1: use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected
Use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected
and in g_dnl_bind_fixup

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:48 +02:00
Patrick Delaunay
00bac2abcd board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_check
Use IS_ENABLED to prevent ifdef in board_key_check

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13 09:52:48 +02:00
Patrice Chotard
f3858ce029 usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter
node varaible is used as iterator into ofnode_for_each_subnode()
loop, when exiting of it, node is no more a valid ofnode.
Use dwc3_node instead as parameter of ofnode_valid()

Fixes: ac28e59a57 ("usb: Migrate to support live DT for some driver")
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
2020-08-13 09:19:18 +02:00
Frank Wunderlich
dbfca734d0 Makefile: fix annoying sunxi hack message
every compilation shows this error

 Hack for sunxi which doesn't have a proper binman definition for
 64-bit boards

not only for sunxi-boards/arm64

fix this by changing to real comments

Fixes: 9f55ee259d0c ("Makefile: sunxi: Don't use binman to build ATF image")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2020-08-12 08:06:00 -04:00
Tom Rini
c25344ff9a Merge tag 'ti-v2020.10-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Added support for J7200 evm
- DM_ETH and DM_USB migrations for omap3
- USB DFU and mass storage support for AM65x evm
- RTI watchdog support for K3 devices
- Fix an issue with L3 cache on K3 devices
2020-08-11 23:03:46 -04:00
Vignesh Raghavendra
db6451ec0e arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port
Enable CPSW2G port to support networking in U-Boot

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-11 20:34:46 +05:30
Vignesh Raghavendra
4bb4b06983 ARM: dts: k3-j7200-mcu-wakeup: Add CPSW2G support
Add MCU NAVSS, UDMA and CPSW2G DT nodes.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-11 20:34:46 +05:30
Vignesh Raghavendra
28e29fbb4f ARM: dts: k3-j7200: Add HyperBus and HyperFlash nodes
J7200 SoM has Cypress HyperFlash connected to HyperBus interface, add DT
entries for the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-11 20:34:46 +05:30
Vignesh Raghavendra
9e8a9b6457 ARM: dts: k3-j7200: Add wkup gpio node
Add wkup_gpio0 node required for detecting whether board mux is set
HyperFlash.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-11 20:34:46 +05:30
Vignesh Raghavendra
d2bc9875eb board: ti: j721e: Add support for HyperFlash detection
On J7200 SoC OSPI0 and HypeFlash are muxed at HW level and only one of
them can be used at any time. J7200 EVM has both HyperFlash and OSPI
flash on board. There is a user switch (SW3.1) that can be toggled to
select OSPI flash vs HyperFlash.
Read the state of this switch via wkup_gpio0_6 line and fixup the DT
nodes to select OSPI0 vs HyperFlash

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-11 20:34:46 +05:30
Vignesh Raghavendra
86c9bd4eb7 arm: dts: k3-j7200: Add USB related DT entries
Add USB related DT entries to enable USB device mode.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
f8c1e893c8 configs: j7200_evm_a72: Add Initial support
Add initial A72 defconfig support.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
02dff65efe configs: j7200_evm_r5: Add initial support
Add initial R5 defconfig support

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-08-11 20:34:46 +05:30
Dave Gerlach
7cc9855f31 arm: dts: k3-j7200: Add R5 specific dts support
Add the basic a72 basic dts for j7200. Following nodes were supported:
- UART
- MMC SD
- I2C
- TISCI communication
- LPDDR with 1600MTs configuration.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
a7551cf05d arm: dts: k3-j7200: Add dts support
Add the basic a72 dts for j7200. Following nodes were supported:
- UART
- MMC SD
- I2C
- TISCI communication

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Kishon Vijay Abraham I
837933a620 soc: soc_ti_k3: Add device identification for J7200 SoC
Add device identification for J7200 SoC

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
6e802ef540 ram: k3-j721e: Relax version checks for memory controller
k3-j721e ddr driver sanity checks for product id and version number.
Version number gets changed for every minor update in the IP. So discard
the version check and just sanity check for product id.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
2cf09d7bed board: ti: j7200: Add board detection support for j7200
Add board detection support for j7200 common processor board.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
cf1d6867f7 board: ti: j7200: Introduce support for j7200 build targets
j7200-evm has minor differences with j721e-evm based on the IPs
available in the SoC. Introduce separate build targets for j7200-evm
to incorporate the differences.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
01dbe366ba arm: mach-k3: j7200: Detect if ROM has already loaded sysfw
Detect if sysfw is already loaded by ROM and pass this information to
sysfw loader. Based on this information sysfw loader either loads the
sysfw image from boot media or just receives the boot notification
message form sysfw.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
9c8f41beea arm: mach-k3: j7200: Add support for storing extended boot info from ROM
Starting J7200 SoC, ROM supports for loading sysfw directly from boot
image. ROM passes this information on number of images that are loaded
to bootloader at certain location. Add support for storing this
information before it gets corrupted.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
30de1ba0d3 arm: mach-k3: j7200: Add support for SOC detection
The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded
products.

Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, two clusters of lockstep
  capable dual Cortex-R5F MCUs and a Centralized Device Management and
  Security Controller (DMSC).
* Configurable L3 Cache and IO-coherent architecture with high data
  throughput capable distributed DMA architecture under NAVSS.
* Integrated Ethernet switch supporting up to a total of 4 external ports
  in addition to legacy Ethernet switch of up to 2 ports.
* Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems,
  20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C and
  I2C, eCAP/eQEP, eHRPWM among other peripherals.
* One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
  management.

See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1

Add support for detection J7200 SoC

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
73108dcd7f arm: mach-k3: j721e: Fix unlocking control module registers
In main control mmr there is no partition 4 and partition 6 is available
only on J721e. Fix the same in ctrl_mmr_unlock function

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
2a18be77de arm: mach-k3: j721e: Add detection for j721e
Add an api soc_is_j721e(), and use it to enable certain functionality
that is available only on j721e. This detection is needed when DT is not
available.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
dc57a554a5 arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
Starting J7200 SoC, ROM supports for loading sysfw directly from boot
image. In such cases, SPL need not load sysfw from boot media, but need
to receive boot notification message from sysfw. So separate out
remoteproc calls for system controller from sysfw loader and just
receive the boot notification if sysfw is already loaded.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
58ccd6105c arm: mach-k3: Move mmr_unlock to a common location
mmr_unlock api is common for all k3 devices. Move it to a common
location.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Jean-Jacques Hiblot
d099db2829 arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled
If SPL_MULTI_DTB_FIT is not enabled, then CONFIG_SPL_OF_LIST is not defined
And in turn tispl.bin ends up not embedding any DTB.
Fixing it by using CONFIG_DEFAULT_DEVICE_TREE if SPL_OF_LIST is empty.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-08-11 20:34:46 +05:30
Suman Anna
0526460a50 board: ti: j721e: Update fdt fixup logic for interconnect nodes
The DT nodes on J721E SoCs currently use a node name "interconnect" for
the various interconnects. This name is not following the DT schema, and
should simply be "bus". Update the fdt fixup logic to use both the current
and the expected corrected path names so that this logic won't be broken
with newer kernels.

Signed-off-by: Suman Anna <s-anna@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
b29a7cd09d board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined
Guard all eeprom probe with TI_I2C_BOARD_DETECT to avoid reading eeprom
when eeprom is not available

Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2020-08-11 20:34:46 +05:30
Lokesh Vutla
6b889389b6 board: ti: board_detect: Add stub functions for EEPROM detection apis
Current usage of eeprom apis produce a build failure when
CONFIG_TI_I2C_BOARD_DETECT is not defined. Add stub function for these
apis to avoid build failures.

Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
49b2830c85 configs: Add new config for supporting USB mass storage boot
Because of space constraints, create a new USB defconfig for R5 to
faciliate booting from USB mass storage devices

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
cc445d70b0 configs: Add defconfig for USB DFU bootmode
Because of space constraints, create a new USB defconfig for R5 to
faciliate booting in USB peripheral (DFU) bootmode

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
eb5bf2f3b6 configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes
Enable configs to facilitate booting from USB Mass Storage devices
as well as USB peripheral boot

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
b528c725e7 configs: am65x_evm: Add support for DFU related configs
Add offset and environment related configs used for booting
from DFU.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
c20aee3e28 arm: dts: k3-am654-base-board: Add support for USB0 in SPL
Add nodes for USB0 in SPL to enable USB host boot mode

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
5251eb13bd arm: dts: k3-am654-r5-base-board: Add USB0 nodes
Add USB0 nodes and set them to host mode to support USB host and
peripheral boot modes

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
897e83f0a5 arm: mach-k3: am6_init: Add support for USB boot mode
Add support for identifying USB host and device boot modes

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
403fc5c9cf arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes
U-boot only supports either USB host or device mode for a node at a
time in dts. To support both host and dfu bootmodes, set "peripheral"
as the default dr_mode but fixup property to "host" if host bootmode
is detected.

This needs to happen before the dwc3 generic layer binds the usb device
to a host or device driver. Therefore, add an fdtdec_setup_board()
implementation to fixup the dt based on the boot mode.

Also use the same fixup function to set the USB-PCIe Serdes mux to PCIe
in both the host and device cases. This is required for accessing the
interface at USB 2.0 speeds.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
febb47ac61 arm: mach-k3: am6_init: Gate mmc related configurations with the appropriate config
Gate mmc related system related configurations with DM_MMC to avoid build
errors when MMC is not enabled

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
f5838b1542 arm: mach-k3: sysfw-loader: Add support to load SYSFW from USB
Add support for loading system firmware from a USB mass storage device

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
f9916b6d3b armv7R: K3: am654: Use full malloc in SPL both pre and post reloc
In order to be able to use things like file system drivers early on in
SPL (before relocation) in a memory-constrained environment when DDR is
not yet available we cannot use the simple malloc scheme which does not
implement the freeing of previously allocated memory blocks. To address
this issue go ahead and enable the use of the full malloc by manually
initializing the required functionality inside board_init_f by creating
a full malloc pool inside the pre-relocation malloc pool.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
39388aebed spl: usb: Only init usb once
usb_init() may be called multiple times for fetching multiple images
from SPL. Skip reinitializing USB if its already been done

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
c3ab97c1dd spl: usb: Create an API spl_usb_load()
Create a new API spl_usb_load() that takes the filename as a parameter
instead of taking the default U-boot PAYLOAD_NAME

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30