Commit graph

174 commits

Author SHA1 Message Date
Alexander Graf
0efe1bcf5c efi_loader: Add network access support
We can now successfully boot EFI applications from disk, but users
may want to also run them from a PXE setup.

This patch implements rudimentary network support, allowing a payload
to send and receive network packets.

With this patch, I was able to successfully run grub2 with network
access inside of QEMU's -M xlnx-ep108.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-27 10:01:10 -04:00
Joe Hershberger
c5a75339cf net: Fix delay in net_retry test
Introduced in 45b4773 (net/arp: account for ARP delay, avoid duplicate packets on timeout)

Check the arp timeout and adjust the timeout start time before the call
to eth_recv() so that the sandbox driver has the opportunity to adjust
the sandbox timer after the new start time has been recorded.

Also, change the adjustment amount by 11 seconds instead of exactly the
10 seconds that the ping timout is expecting since the timeout check is
looking for the time elapsed to be greater than but not equal to the
specified delay.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-07 12:18:58 -07:00
Simon Glass
24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Jacob Stiffler
11a69ff85b net: Increase the size of the net_boot_file_name buffer
The net_boot_file_name buffer is used as storage for the bootfilename
command line argument to network boot commands such as tftp and nfs.

Increase the size of this buffer to 1024 bytes as the current size of
128 bytes is restrictive for arbitrary paths on the server.

Signed-off-by: Jacob Stiffler <j-stiffler@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-29 14:05:47 -05:00
Stefan Brüns
45b47734a0 net/arp: account for ARP delay, avoid duplicate packets on timeout
eth_rx() in the main reception loop may trigger sending a packet which
is already timed out (or will immediately) upon reception of an ARP reply.
As long as the ARP reply is pending, the timeout handler of a packet
should be postponed.
Happens on TFTP with bad network (e.g. WLAN).

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-28 14:57:37 -05:00
Lukasz Majewski
346969584b net: tftp: Move tftp.h file from ./net to ./include/net
This change gives the ability to reuse the <tftp.h> header file by other
subsystems (like e.g. dfu).

Without this change compilation error emerges for the legacy update.c file.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-07 13:41:04 +02:00
Michal Simek
19a4fbaadd net: Return -EINTR when ctrl+c is pressed
Current behavior is that if CTRL+C is pressed command returns 0 that was
successful which is not correct behavior.
The easiest test case is "tftpboot 80000 uImage && echo yes"
and press CTRL+C. Then the second command is called which is incorrect.

Error log:
zynq-uboot> tftpb 80000 uImage && echo yes
Gem.e000b000:7 is connected to Gem.e000b000.  Reconnecting to
Gem.e000b000
Gem.e000b000 Waiting for PHY auto negotiation to complete....... done
Using Gem.e000b000 device
TFTP from server 192.168.0.102; our IP address is 192.168.0.101
Filename 'uImage'.
Load address: 0x80000
Loading: ################
Abort
yes
zynq-uboot>

This patch adds -EINTR return value when CTRL+C is pressed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-08-21 16:32:05 -05:00
Joe Hershberger
fd3056337e net: Use env callbacks for net variables
Instead of checking for changes to the env each time we enter the
net_loop, use the env callbacks to update the values of the variables.
Don't update the variables when the source was programmatic, since the
variables were the source of the new value.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:20 -04:00
Joe Hershberger
bc0571fc10 net: cosmetic: Fix checkpatch.pl failures in net.c
Finish eliminating CamelCase from net.c and other failures

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:35 -06:00
Joe Hershberger
4fd5055f59 net: cosmetic: Clean up cmd_net variables and functions
Make a thorough pass through all variables and function names contained
within common/cmd_net.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:34 -06:00
Joe Hershberger
6a38a5f3df net: cosmetic: Clean up netconsole variables and functions
Make a thorough pass through all variables and function names contained
within netconsole.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:34 -06:00
Joe Hershberger
786eac5f9d net: cosmetic: Clean up DNS variables and functions
Make a thorough pass through all variables and function names contained
within dns.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:34 -06:00
Joe Hershberger
6aede5b750 net: cosmetic: Clean up CDP variables and functions
Make a thorough pass through all variables and function names contained
within cdp.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:34 -06:00
Joe Hershberger
38ba255874 net: cosmetic: Clean up SNTP variables and functions
Make a thorough pass through all variables and function names contained
within sntp.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:34 -06:00
Joe Hershberger
698d78e545 net: cosmetic: Clean up RARP variables and functions
Make a thorough pass through all variables and function names contained
within rarp.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00
Joe Hershberger
68c76a3a38 net: cosmetic: Clean up NFS variables and functions
Make a thorough pass through all variables and function names contained
within nfs.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00
Joe Hershberger
7044c6bb69 net: cosmetic: Clean up DHCP variables and functions
Make a thorough pass through all variables and function names contained
within bootp.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00
Joe Hershberger
85d25e0e76 net: cosmetic: Clean up ARP variables and functions
Make a thorough pass through all variables and function names contained
within arp and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00
Joe Hershberger
8885c5fe90 net: cosmetic: Clean up TFTP variables and functions
Make a thorough pass through all variables and function names contained
within tftp and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00
Joe Hershberger
1fd92db83d net: cosmetic: Fix var naming net <-> eth drivers
Update the naming convention used in the network stack functions and
variables that Ethernet drivers use to interact with it.

This cleans up the temporary hacks that were added to this interface
along with the DM support.

This patch has a few remaining checkpatch.pl failures that would be out
of the scope of this patch to fix (drivers that are in gross violation
of checkpatch.pl).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00
Joe Hershberger
1203fcceec net: cosmetic: Cleanup internal packet buffer names
This patch cleans up the names of internal packet buffer names that are
used within the network stack and the functions that use them.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-18 11:11:32 -06:00
Joe Hershberger
0adb5b761f net: cosmetic: Name ethaddr variables consistently
Use "_ethaddr" at the end of variables and drop CamelCase.
Make constant values actually 'const'.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Joe Hershberger
586cbe51ab net: cosmetic: Fixup var names for DHCP strings
Remove CamelCase variable naming.
Move the definition to the same compilation unit as the primary use.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Joe Hershberger
1411157d85 net: cosmetic: Fixup var names related to boot file
The variables around the bootfile were inconsistent and used CamelCase.
Update them to make the code more readable.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Joe Hershberger
049a95a775 net: cosmetic: Change IPaddr_t to struct in_addr
This patch is simply clean-up to make the IPv4 type that is used match
what Linux uses. It also attempts to move all variables that are IP
addresses use good naming instead of CamelCase. No functional change.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Joe Hershberger
60304592b9 net: Improve error handling
Take a pass at plumbing errors through to the users of the network stack

Currently only the start() function errors will be returned from
NetLoop(). recv() tends not to have errors, so that is likely not worth
adding. send() certainly can return errors, but this patch does not
attempt to plumb them yet. halt() is not expected to error.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:14 -06:00
Joe Hershberger
2a504df006 net: Clean up network stack names used in DM drivers
Take the opportunity to enforce better names on newly written or
retrofitted Ethernet drivers.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:12 -06:00
Joe Hershberger
5c421331d5 net: Make netretry actually do something
netretry previously would only retry in one specific case (your MAC
address is not set) and no other. This is basically useless. In the DM
implementation for eth it turns this into a completely useless case
since an un-configured MAC address results in not even entering the
NetLoop. The behavior is now changed to retry any failed command
(rotating through the eth adapters if ethrotate != no).

It also defaulted to retry forever. It is now changed to default to not
retry

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:11 -06:00
Joe Hershberger
d2eaec6006 net: Remove the bd* parameter from net stack functions
This value is not used by the network stack and is available in the
global data, so stop passing it around.  For the one legacy function
that still expects it (init op on old Ethernet drivers) pass in the
global pointer version directly to avoid changing that interface.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Trival fix to remove an unneeded variable declaration in 4xx_enet.c)
2015-04-18 11:11:11 -06:00
Joe Hershberger
8b2c9a7157 net: Provide a function to get the current MAC address
The current implementation exposes the eth_device struct to code that
needs to access the MAC address.  Add a wrapper function for this to
abstract away the pointer for this operation.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:10 -06:00
Simon Glass
0da0fcd51f net: Use new checksum functions
Drop the old checksum functions in favour of the new ones.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-02-12 10:35:33 -07:00
Wolfgang Denk
2ea9103924 SPDX License cleanup for LiMon imported files
A number of network related files were imported from the LiMon
project; these contain a somewhat unclear license statement:

	Copyright 1994 - 2000 Neil Russell.
	(See License)

I analyzed the source code of LiMon v1.4.2 which was used for this
import.  It does not contain any "License" file, but the top level
directory contains a file "COPYING", which turns out to be GPL v2
of June 1991.  So it is legitimate to conclude that the LiMon derived
files are also to be released under GPLv2.  Mark them as such.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2014-10-10 09:44:43 -04:00
Stephen Warren
f59be6e850 net: BOOTP retry timeout improvements
Currently, the BOOTP code sends out its initial request as soon as the
Ethernet driver indicates "link up". If this packet is lost or not
replied to for some reason, the code waits for a 1s timeout before
retrying. For some reason, such early packets are often lost on my
system, so this causes an annoying delay.

To optimize this, modify the BOOTP code to have very short timeouts for
the first packet transmitted, but gradually increase the timeout each
time a timeout occurs. This way, if the first packet is lost, the second
packet is transmitted quite quickly and hence the overall delay is low.
However, if there's still no response, we don't keep spewing out packets
at an insane speed.

It's arguably more correct to try and find out why the first packet is
lost. However, it seems to disappear inside my Ethenet chip; the TX chip
indicates no error during TX (not that it has much in the way of
reporting...), yet wireshark on the RX side doesn't see any packet.
FWIW, I'm using an ASIX USB Ethernet adapter. Perhaps "link up" is
reported too early or based on the wrong condition in HW, and we should
add some fixed extra delay into the driver. However, this would slow down
every link up event even if it ends up not being needed in some cases.
Having BOOTP retry quickly applies the fix/WAR to every possible
Ethernet device, and is quite simple to implement, so seems a better
solution.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2014-08-09 11:17:03 -04:00
Hannes Petermaier
1f9ce3063c fix: CONFIG_NETCONSOLE start/handle this stuff only outside SPL
SPL stage does not support various networking things, and therefore
CONFIG_NETCONSOLE cannot be built within SPL.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-06-19 11:19:05 -04:00
Jim Lin
b63056d6a4 NET: Add net_busy_flag if CONFIG_USB_KEYBOARD is defined
This flag is to make console aware that NET transfer is running or not.

Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26 21:56:35 +02:00
Jim Lin
7315cfd9e1 NET: Fix system hanging if NET device is not installed
If we try to boot from NET device, NetInitLoop in net.c will be invoked.
If NET device is not installed, eth_get_dev() function will return
eth_current value, which is NULL.
When NetInitLoop is called, "eth_get_dev->enetaddr" will access
restricted memory area and therefore cause hanging.
This issue is found on Tegra30 Cardhu platform after adding
CONFIG_CMD_NET and CONFIG_CMD_DHCP in config header file.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2013-06-19 08:32:44 -04:00
Simon Glass
978226da5e net: Use new numeric setenv functions
Use setenv_ulong(), setenv_hex() and setenv_addr() in net/

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-28 19:09:23 -08:00
Joe Hershberger
a9f51c9b43 env: Add a bootfile env handler
Remove the hard-coded bootfile handler and use a callback instead

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Joe Hershberger
ec8a252cd4 env: Use getenv_yesno() more generally
Move the getenv_yesno() to env_common.c and change most checks for
'y' or 'n' to use this helper.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Kim Phillips
0637059088 net/: sparse fixes
bootp.c:44:14: warning: symbol 'dhcp_state' was not declared. Should it be static?
bootp.c:45:15: warning: symbol 'dhcp_leasetime' was not declared. Should it be static?
bootp.c:46:10: warning: symbol 'NetDHCPServerIP' was not declared. Should it be static?
arp.c:30:17: warning: symbol 'NetArpWaitReplyIP' was not declared. Should it be static?
arp.c:37:16: warning: symbol 'NetArpTxPacket' was not declared. Should it be static?
arp.c:38:17: warning: symbol 'NetArpPacketBuf' was not declared. Should it be static?
atheros.c:33:19: warning: symbol 'AR8021_driver' was not declared. Should it be static?
net.c:183:7: warning: symbol 'PktBuf' was not declared. Should it be static?
net.c:159:21: warning: symbol 'net_state' was not declared. Should it be static?
ping.c:73:6: warning: symbol 'ping_start' was not declared. Should it be static?
ping.c:82:13: warning: symbol 'ping_receive' was not declared. Should it be static?
tftp.c:53:7: warning: symbol 'TftpRRQTimeoutMSecs' was not declared. Should it be static?
tftp.c:54:5: warning: symbol 'TftpRRQTimeoutCountMax' was not declared. Should it be static?
eth.c:125:19: warning: symbol 'eth_current' was not declared. Should it be static?

Note: in the ping.c fix, commit a36b12f95a
"net: Move PING out of net.c" mistakenly carried the ifdef CMD_PING
clause from when it was necessary to avoid warnings when it was embedded
in net.c.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-11-04 11:00:36 -07:00
Joe Hershberger
8cab08e804 net: fix netconsole filtering
Adjustment of Michael Walle's fix patch

Commit 8a0eccb105 breaks netconsole. src_ip
must not be converted to host byte order, because nc_ip is already stored
in network byte order (see string_to_ip(), called by getenv_IPaddr()).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03 16:01:22 -07:00
Joe Hershberger
8a0eccb105 net: Filter incoming netconsole packets by IP
Check the incoming packets' source IP address... if ncip isn't set to a
broadcast address, only listen to the client at ncip.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-24 13:55:44 -05:00
Joe Hershberger
f8be7d659c net: Improve the speed of netconsole
Previously u-boot would initialize the network interface for every
network operation and then shut it down again.  This makes sense for
most operations where the network in not known to be needed soon after
the operation is complete.  In the case of netconsole, it will use the
network for every interaction with the shell or every printf.  This
means that the network is being reinitialized very often.  On many
devices, this intialization is very slow.

This patch checks for consecutive netconsole actions and leaves the
ethernet hardware initialized between them.  It will still behave the
same old way for all other network operations and any time another
network operation happens between netconsole operations.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-24 13:55:43 -05:00
Tetsuyuki Kobayashi
1389f98fce net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000
NetSetTimeout sets incorrect value to timeDelta when CONFIG_SYS_HZ != 1000.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-09-24 13:17:24 -05:00
Joe Hershberger
a03d638805 net: Make sure the ethaddr is updated in net_init()
NetConsole may call NetSendUDPPacket before NetLoop is called.  This
will cause the source MAC address (NetOurEther) to be wrong.  Instead
of only changing it in NetLoop, move it to NetLoopInit so that it is
also updated when net_init() is called (especially by nc_start()).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
2012-07-24 14:09:40 -05:00
Joe Hershberger
4ef8d53caa net: Allow filtering on debug traces in the net subsystem
Add several levels of DEBUG prints so that you can limit the noise to
the severety of your problem.

DEBUG_LL_STATE = Link local state machine changes
DEBUG_DEV_PKT = Packets or info directed to the device
DEBUG_NET_PKT = Packets on info on the network at large
DEBUG_INT_STATE = Internal network state changes

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 17:53:08 -05:00
Joe Hershberger
d22c338e07 net: Add link-local addressing support
Code based on networking/zcip.c in busybox
commit 8531d76a15890c2c535908ce888b2e2aed35b172

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 17:53:08 -05:00
Joe Hershberger
e94070c443 net: Don't copy every packet that waits for an ARP
Use the NetArpTxPacket for the ARP packet, not to hold what used to
be in NetTxPacket.
This saves a copy and makes the code easier to understand.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2012-05-23 17:53:07 -05:00
Joe Hershberger
46c495d524 net: Fix net buffer initialization
A new non-static function net_init() will initialize buffers and
read from the environment.  Only update from the env on each entry
to NetLoop().

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2012-05-23 17:53:06 -05:00
Joe Hershberger
cb1c991120 net: Remove unused parameter from NetInitLoop()
Noone uses it.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2012-05-23 17:53:06 -05:00