Commit graph

88709 commits

Author SHA1 Message Date
Alexander Dahl
1818b44b7b board: sam9x60-curiosity: Let LED subsystem init leds if enabled
If CONFIG_LED and CONFIG_LED_GPIO are enabled, it is not necessary to
initialize the RGB LED on the board by manually setting hardcoded GPIOs
anymore.  Everything is well defined in dts and can be used like on
boards of other vendors.

Keep the old behaviour as fallback, though.

With all this in place enabling CONFIG_CMD_LED gives us a working 'led'
command on the U-Boot shell.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
2023-08-29 17:39:01 +03:00
Alexander Dahl
72d5e3c140 ARM: dts: at91: sam9x60-curiosity: Sync LED nodes from Linux
Copied as is from Linux Kernel release v6.4.

(dts file is still the same in Linux v6.5-rc7 but was moved to vendor
sub-directories with v6.5-rc1.)

Signed-off-by: Alexander Dahl <ada@thorsis.com>
2023-08-29 17:39:01 +03:00
Alexander Dahl
e1ee52ca56 configs: at91: sam9x60: Switch to new reset driver
Since commit 61040097a9 ("reset: at91: Add reset driver for basic
assert/deassert operations") the compatible "microchip,sam9x60-rstc" for
the sam9x60 reset controller in sam9x60.dtsi is not handled by
CONFIG_SYSRESET_AT91 anymore, but by CONFIG_RESET_AT91 now.  This
resulted in the following error message, when trying to reset from
U-Boot shell:

    U-Boot> reset
    resetting ...
    System reset not supported on this platform
    ### ERROR ### Please RESET the board ###

Fixed by enabling the new driver in the relevant defconfigs.  Tested on
sam9x60-curiosity board.  Defconfigs for sam9x60ek adapted in the same
way, but without testing.  These should be all sam9x60 boards affected
in U-Boot here.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
2023-08-29 17:39:01 +03:00
Alexander Dahl
deacc65152 configs: at91: sam9x60_curiosity: Sync both defconfig variants
The board has two SD card slots and we have two defconfigs for booting
from either the first (micro SD) named 'sam9x60_curiosity_mmc_defconfig'
or the second (full size SD) named 'sam9x60_curiosity_mmc1_defconfig'.
For comparable Microchip boards (sama5d27-som1-ek, sama5d29-curiosity,
sama7g5ek) with two card slots the defconfigs only differ in BOOTARGS,
BOOTCOMMAND, and ENV_FAT_DEVICE_AND_PART and the same should be the case
for sam9x60_curiosity.

Here the 'mmc1' config has more options enabled to support the raw NAND
flash populated on the board, so the 'mmc' config (for mmc0) was adapted
by enabling additional options, instead of removing options from mmc1.

The 'mem=128M' argument can be dropped from kernel command line, because
it is redundant to memory node in dts in both Linux and U-Boot:

        memory@20000000 {
                reg = <0x20000000 0x8000000>;
        };

Signed-off-by: Alexander Dahl <ada@thorsis.com>
2023-08-29 17:39:01 +03:00
Tom Rini
0fe0395922 Merge branch '2023-08-28-assorted-important-fixes'
- A few platform-specific config/dts updates to fix issues, drop a
  temporary change in binman, update the MAINTAINERS file to remove
  Wolfgang Denk, fix a typo, fix a corner case with bootstd, update
  Azure to not timeout so easily, and fix a case where we would omit
  some files in SPL.
2023-08-29 10:06:08 -04:00
Ricardo Salveti
c91feda87c Revert "arm: imx: mx7: Move CONFIG_OPTEE_TZDRAM_SIZE from lib/optee"
This reverts commit c5b68ef8af.

CONFIG_OPTEE_TZDRAM_SIZE is used by imx6-based SoCs as well. Move the
option back.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2023-08-28 15:59:22 -04:00
Simon Glass
bbbf04cc7d Revert "binman: Add a temporary hack for duplicate phandles"
The affected boards have been fixed, so drop this hack.

This reverts commit 288ae53cb7.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2023-08-28 15:59:22 -04:00
Simon Glass
98244a8550 imx: Drop unneeded phandle in FIT template
Adding a phandle to a template node is not allowed, since when the node is
instantiated multiple times, we end up with duplicate phandles.

Drop this invalid constructs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2023-08-28 15:59:22 -04:00
Heinrich Schuchardt
fa140172cb MAINTAINERS: remove Wolfgang Denk
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-28 15:59:22 -04:00
Oleksandr Suvorov
70bd471984 spl: crypto: fix including SHA* object files in SPL
If one of SHA* algorithms is disabled in u-boot, its code is not
included in SPL even if a given SHA* option is enabled in SPL. Fix
this.

Fixes: 603d15a572 ("spl: cypto: Bring back SPL_ versions of SHA")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-28 15:59:22 -04:00
Tom Rini
04f7e95385 Azure: Set the timeout for jobs to the maximum
As per current Azure Pipelines documentation we qualify for 3600 minutes
per job, if specified, as the timeout. The default unspecified timeout
is 60 minutes. Rework things to specify 0 as the timeout (and so maximum
allowed) so that we don't have failures due to running slightly past 60
minutes total.

Link: https://learn.microsoft.com/en-us/azure/devops/pipelines/process/phases?view=azure-devops&tabs=yaml#timeouts
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-28 15:59:22 -04:00
Daniel Golle
dcde1f95bf configs: set CONFIG_LMB_MAX_REGIONS=64 for MT7988 boards
Similar to MT7981 and MT7986 also MT7988 can have a high number of
reserved-memory regions used by the various hardware offloading
subsystems.

Raise CONFIG_LMB_MAX_REGIONS to 64 to avoid errors when trying to boot
Linux with more then 6 reserved regions:

ERROR: reserving fdt memory region failed (addr=4f700000 size=240000 flags=4)
ERROR: reserving fdt memory region failed (addr=15194000 size=1000 flags=4)
ERROR: reserving fdt memory region failed (addr=15294000 size=1000 flags=4)
ERROR: reserving fdt memory region failed (addr=15394000 size=1000 flags=4)
ERROR: Failed to allocate 0xb161 bytes below 0x80000000.
device tree - allocation error

Fixes: bc4adc97cf ("board: mediatek: add MT7988 reference boards")
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-08-28 15:59:22 -04:00
Andrew Davis
b982a850d0 configs: Enable CONFIG_DM_SCSI in am57xx_hs_evm_usb
This should have already been enabled but was missed when converting the
base platform defconfig, fix this here.

Fixes: 3c5aa6cacc ("configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-28 15:59:22 -04:00
Simon Glass
5986d46f8e bootstd: Adjust the default bootmeth order
The existing distro scripts check extlinux and scripts before EFI. Adjust
the default ordering to do the same, to avoid breaking existing flows.

Add some documentation, mentioning that this order will likely change in
future.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Da Xue <da@libre.computer>
2023-08-28 15:59:22 -04:00
Frank Wunderlich
d389efc448 arm: dts: mediatek: convert gmac link mode to 2500base-x for r3
Ethernet on Bananapi-r3 is broken after

commit bd70f3cea3 ("net: mediatek: add support for SGMII 1Gbps auto-negotiation mode")

because changes from this commit were not applied to bpi-r3 devicetree too:

commit aef54ea16c ("arm: dts: medaitek: convert gmac link mode to 2500base-x")

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2023-08-28 15:59:22 -04:00
Peter Robinson
d167062c48 boot: Fix reference to bootmenu doc
The Kconfig references a readme file that's moved and
converted to rst so update the reference.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-28 15:59:22 -04:00
Tom Rini
6a1d3f64c2 Pull request efi-2023-10-rc4
Documentation:
 
 * describe TPL/VPL/SPL boot
 * Add support for sphinx-prompt and convert TI K3 to use it
 * board: sdm845: Explicitly add boot.img flashing command
 
 EFI:
 
 * remove handle from events when deleting it
 
 Others:
 
 * fix gpt sub-commands setenv and enumerate
 * add a parameter check in hash_calculate()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmTq//oACgkQxIHbvCwF
 GsSzOA//Z7UVffxRIqvpmL6WUGuE9qyh4VQQlBKwyKNmVeymHZr4Ll+FIQcKwxsP
 MgxrHZF1THq0hmmvvqMB/PdmAK5attheGGXPwwJ1myAapBWgOds2VNkWROC6KoCd
 I/yoXy/U7AbzhAAufFUSZM67od/tKylbO1lokC7ZQI0noeku/0uQOTDhgAnmDulV
 UNCbCJLuEu+tPRP3BnTW6NSchkaMEIJ+lUYhWb2XESEQdR5aspCtnXwesyxhgrva
 zpGE7kh/fWTcIT+Xk/Dsex2DW0uZTchscOMwbGyPlncODSyVod2yOeNgltRKQ3ky
 DG5fAe4y9GckUg9LM3m2xsVcz7AybyHnIPwBceGFr4VR44f4n98yJH4PwuFw4Wbq
 w94KQBjNGdxf1BXFKBDiJqLqmecSyvHXIrEuxVm9K3a8m13ZSiHX40TPfYE5Y832
 BVobxNrXyK0O9iQP2x6arSZJOLx9k51k6jMbUYPpKOJPV7we61ZoFfNNMm47lsvK
 /3CVjFRCqT8hwGPf3dYJlqeT1nGYHOT77AqpsgBfXDbvTnY3/V49fHKM0BbXmgKK
 HMYpMYr+SuazqrkYmZyt+TJELwlR51ha1IFP7thPouKIWtShPhQvwezgrwR5xsRY
 tCME7X2wQZdwDTyiIHCzzTxBkNKA14XFQ9squFa0k/phFSm8KoM=
 =owiu
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-10-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request efi-2023-10-rc4

Documentation:

* describe TPL/VPL/SPL boot
* Add support for sphinx-prompt and convert TI K3 to use it
* board: sdm845: Explicitly add boot.img flashing command

EFI:

* remove handle from events when deleting it

Others:

* fix gpt sub-commands setenv and enumerate
* add a parameter check in hash_calculate()
2023-08-27 11:04:02 -04:00
Ilias Apalodimas
cc889bd075 efi_loader: delete handle from events when a protocol is uninstalled
When a notification event is registered for a protocol the handle of the
protocol is added in our event notification list.  When all the protocols
of the handle are uninstalled we delete the handle but we do not remove
it from the event notification list.

Clean up the protocol removal functions and add a wrapper which
- Removes the to-be deleted handle from any lists it participates
- Remove the handle if no more protocols are present

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-27 08:21:08 +02:00
Heinrich Schuchardt
143c9a7e9d doc: describe TPL/VPL/SPL boot
This is a stub describing how TPL, VPL, and SPL load the next boot stages
on a detail level for users.

For sure we will need a few patches on top to catch the whole complexity.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2023-08-27 08:21:08 +02:00
Nishanth Menon
febc7f1009 doc: board: ti: k3: Convert to sphinx-prompt
Sphinx-prompt provides a handy scheme to provide documentation that
renders nicely and yet provides a scheme to copy paste for users without
having to hand-edit the copied text as is the result of code-block

[1] https://lore.kernel.org/all/87fs48rgto.fsf@baylibre.com/
Reported-by: Simon Glass <sjg@chromium.org>
Suggested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-27 08:21:08 +02:00
Nishanth Menon
1cfcc2298f doc: sphinx: Add sphinx-prompt
Sphinx-prompt[1] helps bring-in '.. prompt::' option that allows a
better rendered documentation, yet be able to copy paste without
picking up the prompt from rendered documentation.

[1] https://lore.kernel.org/all/87fs48rgto.fsf@baylibre.com/
Suggested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-27 08:21:08 +02:00
Sumit Garg
96c4fec701 doc: board: sdm845: Explicitly add boot.img flashing command
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Use code-block. Fix length of two heading underlines.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-27 08:21:08 +02:00
Heinrich Schuchardt
eeef584015 cmd: let gpt_partition_entry be hexadecimal
In commands like 'ls mmc 0:f' the partition number is hexadecimal.

In command 'gpt setenv' variable gpt_partition_entry needs to be set
to a hexadecimal value to allow its use as a parameter in a
subsequent command.

Fixes: 57f8cf1b9aea ("cmd: fix gpt enumerate")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-27 08:21:08 +02:00
Heinrich Schuchardt
41cd23b7be cmd: fix gpt enumerate
Do not assume that partitions are numbered continuously starting at 1.

Only a single partition table type can exist on a block device. If we found
a GPT partition table, we must not re-enumerate with the MBR partition
driver which would find the protective partition.

Fixes: 12fc1f3bb2 ("cmd: gpt: add eMMC and GPT support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-27 08:21:07 +02:00
Heinrich Schuchardt
018346770b cmd: fix gpt setenv
Do not assume that partitions are continuously numbered starting at 1.

Having a partition table with a single partition 63 is valid.

Fixes: 12fc1f3bb2 ("cmd: gpt: add eMMC and GPT support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-27 08:21:07 +02:00
Heinrich Schuchardt
eb48efce26 lib: parameter check in hash_calculate
If hash_calculate is invoked with region_count = 0, it will try to hash
INT_MAX regions. We should check this parameter.

* Avoid a comparison with different signedness.
* Check that region_count is at least 1.
* Avoid a superfluous assignment.

Fixes: b37b46f042 ("rsa: Use checksum algorithms from struct hash_algo")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-27 08:21:07 +02:00
Tom Rini
11cf91f755 Merge branch '2023-08-26-bootstd-chromeos-impreovements-and-move-to-gcc-13.2' into next
First, update CI to using gcc-13.2 from 13.1, and rebuild the CI
containers.  This is needed because the second part adds utilities for
tests and provides, to quote the author:

This updates the ChromiumOS bootmeth to detect multiple kernel
partitions on a disk.

It also includes minor code improvements to the partition drivers,
including accessors for the optional fields.

This series also includes some other related tweaks in testing.
2023-08-26 11:25:08 -04:00
Tom Rini
453c3fb481 CI: Move to latest Ubuntu "Jammy" tag
Move to the latest "Jammy" tag from Ubuntu.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-26 10:07:48 -04:00
Tom Rini
1193428152 CI: Update to gcc-13.2.0
The latest kernel.org toolchains for gcc are now 13.2.0, so upgrade to
that.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-26 10:07:48 -04:00
Simon Glass
f25820b1ae CI: Add ChromiumOS utilities
We need cgpt and futility for building test images. Add them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-26 10:07:48 -04:00
Simon Glass
71f634b822 bootstd: cros: Allow detection of any kernel partition
The existing ChromiumOS bootmeth only supports reading a single kernel
partition, either 2 or 4. In fact there are normally two options
available.

Use the GUID to detect kernel partitions, with the BOOTMETHF_ANY_PART
flag, so that bootstd does not require a valid filesystem before calling
the bootmeth.

Tidy up and improve the logging while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
[trini: Add missing select of PARTITION_TYPE_GUID]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-26 10:07:32 -04:00
Simon Glass
966b16c59a uuid: Add ChromiumOS partition types
Add some GUIDs for ChromiumOS so we can detect the partitions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Simon Glass
831405f41d bootstd: Support bootmeths which can scan any partition
Some bootmeths support scanning a partition without a filesystem on it.
Add a flag to support this.

This will allow the ChromiumOS bootmeth to find kernel partition, which
are stored in a special format, without a filesystem.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Simon Glass
f55aa4454a part: Add a fallback for part_get_bootable()
This function can be called when partition support is disabled. Add a
static inline to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Simon Glass
d08db02d2d bootstd: Add a test for bootmeth_cros
The ChromiumOS bootmeth has no tests at present. Before adding more
features. add a basic test.

This creates a disk which can be scanned by the bootmeth, so make sure
things work. It is quite rudimentary, since the kernel is faked, the root
disk is missing and there is no cmdline stored.

Enable the bootmeth for snow so it can build the unit test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Simon Glass
2b9adcaca2 bootstd: test: Allow binding and using any mmc device
We currently use mmc4 for tests. Update the function which sets this up
so that it can handle any device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Simon Glass
c3867e2e98 bootflow: Show an empty filename when there is none
At present 'bootflow list' shows <NULL> for the filename when it is not
present. Show an empty string instead, since that is more user-friendly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Simon Glass
00613bc19a test: Move 1MB.fat32.img and 2MB.ext2.img
These are currently created in the source directory, which is not ideal.
Move them to the persistent-data directory instead. Update the test so
skip validating the filename, since it now includes a full path.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Simon Glass
e2d22f7822 sandbox: Add a way to access persistent test files
Some pytests create files in the persistent-data directory. It is useful
to be able to access these files in C tests. Add a function which can
locate a file given its leaf name, using the environment variable set
up in test/py/conftest.py

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Simon Glass
8d6337e691 uuid: Move function comments to header file
These should be in the header file for easy browsing, not in the source
code. Move them and add a missing Return on one of the functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
c837a1423c dm: core: Correct error handling when event fails
Follow the correct path in device_probe() when and event handler fails.
This avoids getting into a strange state where the device appears to be
activated but is not.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
fbd644e702 part: efi: Add debugging for the signature check
Add a little more debugging for the initial signature check. Drop the
pointless check for NULL. Also set a log category while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
b2b7e6c181 part: Add an accessor for struct disk_partition sys_ind
This field is only present when a CONFIG is set. To avoid annoying #ifdefs
in the source code, add an accessor. Update the only usage.

Note that the accessor is optional. It can be omitted if it is known that
the option is enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
bcd645428c part: Add accessors for struct disk_partition type_uuid
This field is only present when a CONFIG is set. To avoid annoying #ifdefs
in the source code, add accessors. Update all code to use it.

Note that the accessor is optional. It can be omitted if it is known that
the option is enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
c5f1d005f5 part: Add accessors for struct disk_partition uuid
This field is only present when a CONFIG is set. To avoid annoying #ifdefs
in the source code, add accessors. Update all code to use it.

Note that the accessor is optional. It can be omitted if it is known that
the option is enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
ade2316da3 part: Add comments for static functions
Some internal functions could do with a few comments, to explain what they
do. Add these, to make the code easier to follow.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
060148a371 part: nac: Use desc instead of dev_desc
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the mac code to
just use 'desc'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
06e293ed7c part: iso: Use desc instead of dev_desc
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the iso code to
just use 'desc'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
7ed781fb4c part: efi: Use desc instead of dev_desc
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the efi code to
just use 'desc'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00
Simon Glass
cfdcd41e5a part: dos: Use desc instead of dev_desc
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the dos code to
just use 'desc'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:18 -04:00