Commit graph

22952 commits

Author SHA1 Message Date
Simon Glass
0d9da97daa Correct SPL use of FASTBOOT_MMC_USER_SUPPORT
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_FASTBOOT_MMC_USER_SUPPORT defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09 16:32:26 -05:00
Simon Glass
64d6bfb660 Correct SPL uses of FASTBOOT_FLASH
This converts 3 usages of this option to the non-SPL form, since there is
no SPL_FASTBOOT_FLASH defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-02-09 16:32:26 -05:00
Simon Glass
43512276da Correct SPL use of DEBUG_UART_ZYNQ
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_DEBUG_UART_ZYNQ defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09 16:32:26 -05:00
Simon Glass
8dd86205cc Correct SPL uses of CMD_CLK
This converts 7 usages of this option to the non-SPL form, since there is
no SPL_CMD_CLK defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2023-02-09 16:32:25 -05:00
Simon Glass
684787e7d7 Correct SPL use of A003399_NOR_WORKAROUND
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_A003399_NOR_WORKAROUND defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09 16:32:25 -05:00
Simon Glass
497b7c6beb Correct SPL use of MMC_QUIRKS
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_MMC_QUIRKS defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-09 12:50:50 -05:00
Simon Glass
0976963a32 usb: Drop unused sl811-hcd driver
This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:50 -05:00
Simon Glass
854793cb15 usb: Drop unused ehci-vct driver
This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:50 -05:00
Simon Glass
c090ffb843 rmobile: Drop unused ehci-rmobile driver
This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:50 -05:00
Simon Glass
e9b4678bc7 usb: Drop unused fotg210 gadget
This is not used and appears to be associated with the faraday board which
has been removed. Drop the driver and Kconfig options.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:50 -05:00
Simon Glass
5eddad039b usb: Drop unused ehci-faraday driver
This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:50 -05:00
Simon Glass
82803a60b1 armada: usb: net: Drop unused USB drivers
These are not used. Drop the drivers and Kconfig option. Also drop an
old declaration in the netdev.h header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:50 -05:00
Simon Glass
04c8b0da68 sh4: Drop unused kona_i2c driver
This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2023-02-07 14:33:49 -05:00
Simon Glass
00035c240f sysreset: at91: Correct Makefile rule for SYSRESET_AT91
The SPL_TPL part is in the wrong place. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 71d4393f84 ("sysreset: Add Atmel/Microchip sysreset driver")
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2023-02-07 14:33:49 -05:00
Simon Glass
295ae34c07 sh4: Drop unused pci_sh7780 driver
This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
69f06c8da6 rmobile: Drop CONFIG_SH73A0 and associated code
This option does not exist, so the code attached to it is not used. Drop
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
bf448073ea mtd: Drop unused scf0403_lcd driver
This is not used since this commit:

   76386d6195 arm: Remove cm_t35 board

Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
2cf16adac9 rtc: Drop old and unused drivers
These drivers are not used and have not been converted to driver model.
Drop them and references to the non-existent CONFIG options they use.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
762c00d3d4 power: Drop unused muic_max8997 driver
This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
4623e7e20a power: Drop unused muic_max77693 driver and mfd code
This driver is not used and has lain unconverted since:

   fc47cf9d05 arm: exynos: i2c: Convert exynos boards to use DM_I2C

Drop it and the entire mfd directory, since there is nothing left.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
5f1aa5cc8a power: Drop unused fg_max17042 driver and fuel gauge code
This driver is not used. Drop it and the entire fuel_gauge directory,
since there is nothing left.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
7cac324aee power: Drop unused bat_trats driver and battery code
This driver and bat_trats2 are not used. Drop them and the entire battery
directory, since there is nothing left.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
408296aad9 gpio: Drop unused pca9698 driver
This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
8957588a44 omap: Drop unused CONFIG_OMAP_USB_PHY
This option does not exist, so the Makefile rule does nothing. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-02-07 14:33:49 -05:00
Simon Glass
49c164c310 mtd: Drop unused nand_plat driver
This is not used since this commit:

   936478e797 SPARC: Remove

Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:49 -05:00
Simon Glass
6a138b0be3 mtd: Drop unused fsmc_nand driver
This is not used since this commit:

   570c3dcfc1 arm: Remove spear600 boards and the rest of SPEAr support

Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2023-02-07 14:33:49 -05:00
Simon Glass
2661c2da6d mtd: Drop unused fsl_upm driver
This is not used since this commit:

   8d1e3cb140 powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support

Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
2023-02-07 14:33:48 -05:00
Simon Glass
cdcc9bc187 gpio: Drop unused mpc83xx_gpio driver
This is not used since this commit:

   7458f18e5c ppc: Remove MPC8313ERDB boards

Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
721938e92f video: Drop unused lg4573 driver
This is not used since this commit:

   3cf02f5ffa imx6: remove not longer supported aristainetos boards

Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
8742abedcf arm: Drop old kona code
The KONA and KONA_GPIO options don't exist anymore, since this commit:

   0f6807e77b arm: Remove bcm28155_ap board

Drop the dead code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
8f2eb2fb19 freescale: Drop unused ftpmu010 driver
Drop this unused code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
e77e64b71a misc: Drop mc9sdz60 driver
Drop this unused driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
1edc21a78b fpga: Add a FPGA_STRATIX_II option
There is no Kconfig option for this code, but it seems to be useful. Add
one.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
8badd3363e fpga: Add a LATTICE option
There is no Kconfig option for this code, but it seems to be useful. Add
one.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
cc756b5509 samsung: Drop CONFIG_EXYNOS_PWM_BL
This is not defined anywhere. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2023-02-07 14:33:48 -05:00
Simon Glass
a8a97ef519 Drop CONFIG_DM644X_GPIO
Drop this unused option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
26de9a745c misc: Drop ali512x
Drop this unused driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:47 -05:00
Simon Glass
ab00ba032f gpio: Drop adi_gpio2
Drop this unused driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:47 -05:00
Simon Glass
6bc343c24f power: Drop pmic_max77693.c
Drop this driver and the associated CONFIG option, as it is not used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:47 -05:00
Simon Glass
9262fa8b68 nand: Drop CONFIG_NAND_SPEAR
This is not used anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2023-02-07 14:33:47 -05:00
Simon Glass
9c6e0ee6e1 power: Drop fg_max77693
This is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:47 -05:00
Simon Glass
dd4bd9ad86 qemu: Add a bootdev for qfw
Add a bootdev device for qfw so that it can be used with standard boot.
This simply checks for the correct method and then does the read. Most of
the other logic is handed in a new bootmeth driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-06 13:04:53 -05:00
Simon Glass
a710f5b2eb bootstd: Correct virtio block-device handling
At present virtio tries to attach QEMU services to a bootdev device, which
cannot work. Add a check for this.

Also use bootdev_setup_sibling_blk() to create the bootdev device, since
it allows the correct name to be used and bootdev_get_sibling_blk() to
work as expected.

The bootdev is not created on sandbox since it does have a real virtio
device and it is not possible to read blocks.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: a60f7a3e35 ("bootstd: Add a virtio bootdev")
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-02-06 13:04:53 -05:00
Simon Glass
d472e93ab4 virtio: Add some debugging
When QEMU does not respond for some reason, it is helpful to have
debugging info to show. Add some.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-06 13:04:53 -05:00
Nikhil M Jain
5f9f816bb8 drivers: video: tidss: TIDSS video driver support for AM62x
Added tidss video driver support which enables display
on oldi panel using AM62x, it creates a simple pipeline
framebuffer==>vidl1==>ovr1==>vp1==>oldi_panel and
calculates clock rates for panel from panel node in
device tree.

To compile TIDSS when user sets CONFIG_VIDEO_TIDSS
add rule in Makefile. Include tidss folder location
in Kconfig.

TIDSS is ported from linux kernel version 5.10.145

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-02-04 18:16:30 +01:00
Nikhil M Jain
3ebe3c703b drivers: video: simple_panel: make simple panel independent of backlight
This patch updates the necessary Kconfigs to make simple panel
driver independent of backlight driver  and compiling backlight
related code in simple-panel driver conditionally to when user
has set CONFIG_BACKLIGHT.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-04 18:16:00 +01:00
Nikhil M Jain
0347cc7732 drivers: core: ofnode: Add panel timing decode.
ofnode_decode_display_timing supports reading timing parameters from
subnode of display-timings node, for displays supporting multiple
resolution, in case if a display supports single resolution, it fails
reading directly from display-timings node, to support it
ofnode_decode_panel_timing is added.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-04 18:13:21 +01:00
Dario Binacchi
f4cf8710a1 video: ti: am335x: restore driver-model code
The commit 82f7b869f5 ("video: Drop CONFIG_AM335X_LCD") removed not
only the LCD legacy implementation but also the code with driver model
support. The patch restores the code with driver model support.

Fixes: 82f7b869f5 ("video: Drop CONFIG_AM335X_LCD")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-04 13:36:23 +01:00
Ioana Ciornei
878a20aa15 drivers: net: fsl_ls_mdio: prevent a NULL pointer dereference
Prevent a NULL pointer dereference in the probe path by checking the
return valud of dev_read_addr_ptr() against NULL.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02 14:44:53 -05:00
Ioana Ciornei
cfbd388ae7 drivers: net: fsl-mc: do not use multiple blank lines
Remove the instances in which we have multiple blank lines.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02 14:44:53 -05:00
Ioana Ciornei
f45ed0b5ec drivers: net: fsl-mc: align parameters to the open paranthesis
There were some cases in which the function parameters were not aligned
to the open paranthesis. Fix those instances.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02 14:44:53 -05:00
Ioana Ciornei
6dcf5e4477 drivers: net: fsl-mc: remove explicit cast
Remove all the explicit casts from the void* returned by calloc.
With this we also improve a bit the length of those lines and there is
no need to split the assignment.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02 14:44:53 -05:00
Ioana Ciornei
8ecf1ca093 drivers: net: fsl-mc: do not prefix decimal values with 0x
The fsl-mc driver printed debug information which used the 0x prefix for
decimal values. This only confuses anyone looking through the log.
Because of this, just remove the prefix and use the "DPXY.<id>" notation
which is the standard one for the DPAA2 objects.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02 14:44:53 -05:00
Ioana Ciornei
3ad24e4d36 drivers: net: fsl-mc: remove an useless break statement
The break statement is just after a goto statement, thus it will not get
executed. Just remove it.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02 14:44:53 -05:00
Ioana Ciornei
32221ee236 drivers: net: fsl-mc: remove useless assignment of variable
The cur_ptr variable is set to the start of the log buffer but then it's
not used. Just remove the assignment altogether.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02 14:44:53 -05:00
Tim Harvey
01e7dd050f net: add MV88E6xxx DSA driver
Add a DSA driver for the MV88E6xxx compatible Ethernet switches.

Cc: Marek Behún <marek.behun@nic.cz>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-02-02 14:44:53 -05:00
Tim Harvey
3b8f99a3e7 net: fec: add support for DM_MDIO
Add support for DM_MDIO by registering a UCLASS_MDIO driver and
attempting to use it. This is necessary if wanting to use a DSA
driver for example hanging off of the FEC MAC.

Care is taken to fallback to non DM_MDIO mii bus as several boards define
DM_MDIO without having the proper device-tree configuration necessary
such as an mdio subnode, a phy-mode prop, and either a valid phy-handle
prop or fixed-phy subnode which will cause dm_eth_phy_connect() to fail.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-02-02 14:44:51 -05:00
Tim Harvey
8abb9f6b17 net: ksz9477: remove unnecessary xmit and recv functions
Remove the unnecessary xmit and recv functions.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-02-02 14:22:08 -05:00
Tom Rini
9918b25d21 Merge commit 'refs/pipelines/15015' of https://source.denx.de/u-boot/custodians/u-boot-tegra 2023-02-02 12:44:12 -05:00
Svyatoslav Ryhel
adf869045d drivers: timer: add driver for ARMv7 based Tegra devices and T210
Add timer support for T20/T30/T114/T124 and T210 based devices.
Driver is based on DM, has device tree support and can be
used on SPL and early boot stage.

Arm64 Tegra (apart T210) according to comment in tegra-common.h use
architected timer.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30
Tested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> # Surface RT T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Agneli <poczt@protonmail.ch> # Toshiba AC100 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Co-developed-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom <twarren@nvidia.com>
2023-02-02 10:16:41 -07:00
Svyatoslav Ryhel
87a758652b ARM: tegra: remap clock_osc_freq for all Tegra family
Enum clock_osc_freq was designed to use only with T20.
This patch remaps it to use additional frequencies, added in
T30+ SoC while maintaining backwards compatibility with T20.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30
Tested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> # Surface RT T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Agneli <poczt@protonmail.ch> # Toshiba AC100 T20
Tested-by: Thierry Reding <treding@nvidia.com> # T30, T124, T210
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom <twarren@nvidia.com>
2023-02-02 10:16:41 -07:00
Marek Vasut
1006b33b3a net: ravb: Drop SoC-specific compatible support
The current set of U-Boot upstream R-Car Gen3 DTs all contain generic
"renesas,etheravb-rcar-gen3" compatible strings, drop the SoC specific
compatible string support from U-Boot to reduce size and duplication.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:21 +01:00
Hai Pham
1b4ca865b2 clk: renesas: rcar-gen3: Factor out CPG library
R-Car V3U has a CPG different enough to not be a generic Gen3 CPG but
similar enough to reuse code. Introduce a new CPG library, factor out
the SD clock and RPC clock handling and hook them to the generic Gen3
CPG driver so we have an equal state.

Based on Linux commit [1] and [2] by Wolfram Sang

[1] 8bb67d87346a ("clk: renesas: rcar-gen3: Factor out CPG library")
[2] 6f21d145b90f ("clk: renesas: cpg-lib: Move RPC clock registration to
the library")

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek: - Add rcar_clk_* prefix to all functions
       - Rebase on changes to
         clk: renesas: Introduce and use rcar_clk_get_rate64_div_table function
       - Use u32_encode_bits/GENMASK bitfield ops
2023-02-02 01:49:20 +01:00
Hai Pham
d8132ae37a clk: renesas: Add R8A77970 SD0H/SD0 clocks for SDHI
On R-Car V3M (AKA R8A77970), the SD0CKCR is laid out differently than on
the other R-Car gen3 SoCs. Hence, new clock types are introduced
respectively.

Based on Linux commit 381081ffc294 ("clk: renesas: r8a77970: Add SD0H/SD0
clocks for SDHI") by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek: - Fix missing ~ in GENMASK(a, b), use clrsetbits_le32 instead
       - Do not modify r8a77970-cpg-mssr.c much, drop enum r8a77970_clk_types
         which is now part of common clock types in rcar-gen3-cpg.h instead
2023-02-02 01:49:20 +01:00
Hai Pham
4dbbc3f373 clk: renesas: Switch to new SD clock handling
The old SD handling code was huge and could not handle all the details
which showed up on R-Car Gen3 SoCs meanwhile. It is time to switch to
another design. Have SDnH a separate clock, use the existing divider
clocks and move the errata handling from the clock driver to the SDHI
driver where it belongs.

Based on Linux series by Wolfram Sang, commit bb6d3fa98a41 ("clk:
renesas: rcar-gen3: Switch to new SD clock handling") and commit
e5f7e81ee430a ("mmc: renesas_sdhi: Parse DT for SDnH")

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek: - Add rcar_clk_* prefix to all functions
       - Fix missing ~ in GENMASK(a, b), use clrsetbits_le32 instead
       - Use DIV_ROUND_CLOSEST, else if parent clock = 199999992 and
         rate = 200000000, the divider would be 0 and table lookup
	 would fail.
       - Turn rcar_clk_get_table_val into signed integer, so it can
         return 0 as a valid value and negative values as errors.
       - Make the code operate on correct clock and add comment
         which explains the reasoning behind it.
       - Rebase on changes to
         clk: renesas: Introduce and use rcar_clk_get_rate64_div_table function
2023-02-02 01:49:20 +01:00
Hai Pham
c287c184ae clk: renesas: Handle E3/D3 RPCSRC clock
The RPCSRC clock divider on R-Car D3 is very similar to the one on R-Car
E3, but uses a different pre-divider for the PLL0 parent.  Add a new
macro to describe it, reusing the existing clock type for R-Car E3.

As both E3/D3 RPCSRC clock divider are different from the rest of R-Car
Gen3, keep the original implementation from Linux.

Based on Linux commit 40745482eec8 ("clk: renesas: r8a774c0: Add RPC
clocks") by Lad Prabhakar and 9d18f81b3535 ("clk: renesas: r8a77995: Add
RPC clocks") by Geert Uytterhoeven.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Add D3 tweaks
2023-02-02 01:49:20 +01:00
Hai Pham
a1ec0bbc28 clk: renesas: Introduce and use rcar_clk_get_rate64_div_table function
Introduce new helper function to handle clock type that uses
clk_div_table struct. Based vaguely on Linux code. Make use
of clk_div_table in RPC clocks handling.

The E3/D3 RPCSRC need to be handled differently and will be addressed in
subsequence patch.

Based on Linux commit db4a0073cc82 ("clk: renesas: rcar-gen3: Add RPC
clocks") by Sergei Shtylyov.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek: - Squash patches to avoid adding unused code:
         clk: renesas: Make use of clk_div_table in RPC clocks handling
         clk: renesas: Introduce rcar_clk_get_rate64_div_table function
       - Move the new code to the beginning of clk-rcar-gen3 to avoid
         tables mixed with code
       - Use rcar_ prefix for get_table_div function
       - Get rid of custom macros, use GENMASK. Use custom field_get
         implementation as the generic FIELD_GET does not support
	 constant mask and u32_get_bits requires higher optimization level
       - Pass in the register bit mask instead of width/shift combination
       - Turn rcar_clk_get_rate64_div_table into s64, as it can return -EINVAL
2023-02-02 01:49:20 +01:00
Marek Vasut
d48c38db13 clk: renesas: Convert Gen2/Gen3 clock tables to clk-provider struct clk_div_table
Replace custom local structure with matching one from clk-provider.h .
No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Hai Pham
3c78ce8680 mmc: renesas-sdhi: Flag non-standard SDnH handling for V3M
V3M handles SDnH differently than other Gen3 SoCs, so let's add a
separate entry for that. This will allow better SDnH handling in the
future.

Based on Linux commit 627151b4966f ("mmc: renesas_sdhi: Flag
non-standard SDnH handling for V3M") by Wolfram Sang

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02 01:49:20 +01:00
Hai Pham
89f9e729be mmc: renesas-sdhi: Drop R-Car H3 ES3.0 HS400 calibration table
It is unnecessary, so clean it up.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # update commit message, mention ES3.0
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02 01:49:20 +01:00
Hai Pham
d919bb9830 mmc: renesas-sdhi: Add R8A77961 M3-W+ support
Support R8A77961 M3-W+ SoC.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02 01:49:20 +01:00
Hai Pham
1cdabcc6a4 mmc: renesas-sdhi: Adjust HS400 calibration offsets for M3-W r1.3
Still uses 0x3 for now, adjust the offset value to TMPPORT3 accordingly

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02 01:49:20 +01:00
Hai Pham
af95db514d mmc: renesas-sdhi: Adjust HS400 calibration tables
Adjust HS400 calibration tables based on Linux settings

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02 01:49:20 +01:00
Hai Pham
6d7d4c4821 mmc: renesas-sdhi: Filter out HS400 on M3-W r1.2, V3M, V3H r1.x, D3
Further filter out HS400 support on certain SoCs.

Since M3-W r1.2 does not support HS400, drop the calibration table and
rename the one for M3-W r1.3 to r8a7796_rev13_calib_table

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02 01:49:20 +01:00
Hai Pham
01cbce80c1 mmc: renesas-sdhi: R-Car M3 r1.3 also uses 4 tuning taps
Early ES revisions of M3-W SoCs requires 4-tap HS400. Reflect the status
from datasheet.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
a61a824169 clk: renesas: Drop core param from gen3_clk_get_rate64_pll_mul_reg
Drop 'core' parameter from gen3_clk_get_rate64_pll_mul_reg() function
as it is only used in debug print. No functional change except for the
debug print, which is disabled by default.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Hai Pham
21a8dbc369 clk: renesas: Use pre-defined offset for RPC clocks
Since commit f7b4e4c094 ("clk: renesas: Synchronize R-Car Gen3 tables
with Linux 5.12"), the custom macros for RPC clocks were dropped.

Use pre-defined offset for RPC clocks, same as what Linux does, instead
of retrieving it from the macros

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
326e05c5e2 clk: renesas: Add and enable CPG reset driver
Add trivial reset driver extension to the CPG clock driver. The change
turns current CPG UCLASS_CLK driver instance into an UCLASS_NOP proxy
driver, which in turn binds both generic rcar3_clk UCLASS_CLK clock
driver as well as generic rcar_rst UCLASS_RESET reset driver to the
CPG DT node. This way, any other drivers which use the 'reset' DT
property can now obtain valid reset handle backed by a reset driver.

The clock tables have been updated to represent the CPG driver and only
implement the generic CPG proxy driver bind call, which binds the clock
and reset drivers.

The DM_RESET is now enabled for all R-Car Gen3 platforms.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Hai Pham
d1c886f563 clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support
Add support for the R-Car M3-W+ (R8A77961) SoC.
R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), which allows for
both SoCs to share a driver.

Based on Linux commit 2ba738d56db4 ("clk: renesas: r8a7796: Add R8A77961
CPG/MSSR support")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Hai Pham
9d16ed44f0 clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960
Rename CONFIG_CLK_R8A7796 for R-Car M3-W (R8A77960) to
CONFIG_CLK_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_CLK_R8A77961.

Based on Linux commit 92d1ebae9abf ("clk: renesas: Rename CLK_R8A7796
to CLK_R8A77960")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
83fc4729a5 clk: renesas: Synchronize R8A774E1 RZ/G2H clock tables with Linux 6.1.7
Synchronize R8A774E1 RZ/G2H clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
48e65a67bf clk: renesas: Synchronize R8A774C0 RZ/G2E clock tables with Linux 6.1.7
Synchronize R8A774C0 RZ/G2E clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
993cf4c5d3 clk: renesas: Synchronize R8A774B1 RZ/G2N clock tables with Linux 6.1.7
Synchronize R8A774B1 RZ/G2N clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
59752ef264 clk: renesas: Synchronize R8A774A1 RZ/G2M clock tables with Linux 6.1.7
Synchronize R8A774A1 RZ/G2M clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
733da621d5 clk: renesas: Synchronize R8A779A0 V3U clock tables with Linux 6.1.7
Synchronize R-Car R8A779A0 V3U clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Rename CLK_TYPE_R8A779A0_ to CLK_TYPE_GEN4_ to match the new
clock tables. Add CLK_TYPE_GEN4_SD, CLK_TYPE_GEN4_RPC and
CLK_TYPE_GEN4_RPCD2 macros and handling into Gen3 CPG core.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
4fc053f1e2 clk: renesas: Synchronize R8A77995 D3 clock tables with Linux 6.1.7
Synchronize R-Car R8A77995 D3 clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
68a23c2345 clk: renesas: Synchronize R8A77990 E3 clock tables with Linux 6.1.7
Synchronize R-Car R8A77990 E3 clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
df5e5b9870 clk: renesas: Synchronize R8A77980 V3H clock tables with Linux 6.1.7
Synchronize R-Car R8A77980 V3H clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
d3292b7944 clk: renesas: Synchronize R8A77965 M3-N clock tables with Linux 6.1.7
Synchronize R-Car R8A77965 M3-N clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
1ec51f9203 clk: renesas: Synchronize R8A77960 M3-W and R8A77961 M3-W+ clock tables with Linux 6.1.7
Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
5a2d153149 clk: renesas: Synchronize R8A7795 H3 clock tables with Linux 6.1.7
Synchronize R-Car R8A7795 H3 clock tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Hai Pham
c206dfd27e clk: renesas: Add dummy SDnH clock
Currently, SDnH is handled together with SDn. This caused lots of
problems, so we want SDnH as a separate clock. Introduce a dummy SDnH
type here which creates a fixed-factor clock with factor 1. That allows
us to convert the per-SoC CPG drivers while keeping the old behaviour
for now. A later patch then will add the proper functionality.

Based on Linux series by Wolfram Sang:
commit a31cf51bf6b4b ("clk: renesas: rcar-gen3: Add dummy SDnH clock"),
commit 1abd04480866c ("clk: renesas: rcar-gen3: Add SDnH clock"),
commit 63494b6f98f26 ("clk: renesas: r8a779a0: Add SDnH clock to V3U")

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Switch to gen3_clk_get_rate64
2023-02-02 01:49:20 +01:00
Hai Pham
eaa4a7d411 pinctrl: renesas: r8a7796: Add R8A77961 PFC support
R-Car M3-W+ (R8A77961) is pin compatible with R-Car M3-W (R8A77960),
which allows for both SoCs to share a driver.

Based on Linux commit 708c69e9eacc ("pinctrl: sh-pfc: r8a7796: Add
R8A77961 PFC support") and 74ce7a8044b0 ("pinctrl: renesas: r8a7796:
Optimize pinctrl image size for R8A774A1")

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
2023-02-02 01:49:20 +01:00
Marek Vasut
8a9e8ba9ae pinctrl: renesas: Synchronize R8A779A0 V3U PFC tables with Linux 6.1.7
Synchronize R-Car R8A779A0 V3U PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
37fb54b6e6 pinctrl: renesas: Synchronize R8A77995 D3 PFC tables with Linux 6.1.7
Synchronize R-Car R8A77995 D3 PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
a22eba36a9 pinctrl: renesas: Synchronize R8A77990 E3 PFC tables with Linux 6.1.7
Synchronize R-Car R8A77990 E3 PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
3bf4933555 pinctrl: renesas: Synchronize R8A77980 V3H PFC tables with Linux 6.1.7
Synchronize R-Car R8A77980 V3H PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
84d7588cc6 pinctrl: renesas: Synchronize R8A77970 V3M PFC tables with Linux 6.1.7
Synchronize R-Car R8A77970 V3M PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
50970e8c2d pinctrl: renesas: Synchronize R8A77965 M3-N PFC tables with Linux 6.1.7
Synchronize R-Car R8A77965 M3-N PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
0a57a382af pinctrl: renesas: Synchronize R8A77960 M3-W and R8A77961 M3-W+ PFC tables with Linux 6.1.7
Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Note that the Kconfig option name has been updated to match the
Linux kernel Kconfig option name, from PINCTRL_PFC_R8A7796 to
PINCTRL_PFC_R8A77960 .

Also note that a new Kconfig option has been added to enable support
for R8A77961 M3-W+ , the Kconfig option name is PINCTRL_PFC_R8A77961 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
9916e8bfc6 pinctrl: renesas: Synchronize R8A7795 H3 PFC tables with Linux 6.1.7
Synchronize R-Car R8A7795 H3 PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Note that the Kconfig option name has been updated to match the
Linux kernel Kconfig option name, from PINCTRL_PFC_R8A7795 to
PINCTRL_PFC_R8A77951 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
f46776cce0 pinctrl: renesas: Synchronize R8A7794 E2 PFC tables with Linux 6.1.7
Synchronize R-Car R8A7794 E2 PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
f36c55fc6d pinctrl: renesas: Synchronize R8A7792 V2H PFC tables with Linux 6.1.7
Synchronize R-Car R8A7792 V2H PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
9a955714a1 pinctrl: renesas: Synchronize R8A7791 M2-W and R8A7793 M2-N PFC tables with Linux 6.1.7
Synchronize R-Car R8A7791 M2-W and R8A7793 M2-N PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
f8ea2a6779 pinctrl: renesas: Synchronize R8A7790 H2 PFC tables with Linux 6.1.7
Synchronize R-Car R8A7790 H2 PFC tables with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
3e81242160 pinctrl: renesas: Synchronize PFC core with Linux 6.1.7
Synchronize R-Car PFC core with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

Parts picked from
pinctrl: renesas: Synchronize R-Car Gen2/Gen3 tables with Linux 5.18.3
- Add pin groups for the green and high8 subsets of the Video IN pins
- Add MediaLB pins
- Add bias support for various SoCs
- Share more pin group data, to reduce size and ease review
- Miscellaneous cleanups, fixes and improvements.

This contains port of Linux kernel commit
6210905586ae ("pinctrl: renesas: Add shorthand for reserved register fields")
to handle negative entries in GROUP() macros correctly.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02 01:49:20 +01:00
Marek Vasut
71d2a5e5ef ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7
Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

The following script has been used for the synchronization:

$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
	if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
		cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
	elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
		cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
	else
		echo "NOT FOUND: $i"
	fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )

Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.

Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.

Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .

Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .

Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> # r8a779a0-falcon-u-boot.dts
2023-02-02 01:49:19 +01:00
Tom Rini
1e1cd8eb2d Merge tag 'fsl-qoriq-2023-2-1' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
make QSPI clock selection optional during SoC init for ls102xa
Fix regulator name for ls2_sfp
Update NXP RCW github repo
2023-02-01 09:31:17 -05:00
Tom Rini
3592a61fa8 For 2023.04
-----------
 
 - several conversion to DM_SERIAL and DM_I2C
 - fixes for Toradex boards
 - PSCI
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14965
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCY9oyZQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aRSACfTkUWr+8n4hmllhry2c8K+gCM2QMAnRMK0o8U
 4eUOumy6t5bFeUO69n5W
 =y7+C
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230201' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

For 2023.04
-----------

- several conversion to DM_SERIAL and DM_I2C
- fixes for Toradex boards
- PSCI

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14965
2023-02-01 09:30:52 -05:00
Sean Anderson
4992d8360d misc: ls2_sfp: Fix regulator name
Unlike in Linux, -supply is not automatically appended to regulator
requests. Add it.

Fixes: 2645bc0e12 ("arm: layerscape: Add sfp driver")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-02-01 14:17:29 +08:00
Tom Rini
73a3f51391 Merge https://source.denx.de/u-boot/custodians/u-boot-mmc 2023-01-31 18:28:07 -05:00
Ye Li
7246ec1934 imx8: scu_api: sync sc_rm_is_pad_owned api change
SCFW has fixed a overflow issue in sc_rm_is_pad_owned API. This
requires u-boot to update API implementation, since it will cause
compatible issue. Otherwise all pad checking will have problem and
cause pad setting not continue.

Due to the compatible issue, the new u-boot only works with new
SCFW (API version: 1.21 and later).

old scfw + old u-boot: API overflow issue
old scfw + new u-boot, or new scfw + old u-boot: API compatible issue
new scfw + new u-boot: Working

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by : Jason Liu <Jason.hui.liu@nxp.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-01-31 19:44:23 +01:00
Tom Rini
095d909cf1 - jethub j100: add rescue boot from microSD
- move meson sm command to cmd/meson and add efusedump sub-command
 - switch dwc2 otg to DM for G12A, GXL & AXG
 - Add new boards:
  - Odroid Go Ultra
  - Odroid-N2L
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmPY1OsACgkQd9zb2sjI
 SdEo4w//WU0siViTHkco8GH7eZDrRKbsxgMZpmjih2gblDKfxmMPYFFtciXPH3wg
 isBu+qfLFtTIg5oEvwS42G4RzNQPV8HDcpc7Md/3n3GtxF1l/dCo0nvfIi9PsuLB
 x1GYAJ5yphgOC85DB55Gnq7sj7L2/7z6dd/HFGO691+3Bcbq8RH6DDZ0MNZpiiUK
 Ns43u+A6Ydc2/fpX9U7X2wf7CoEk77qWmiN2N1egVIeRsBallPxs/DPNLI2q7AGZ
 OGY+M3lVynRlNJULdgljqvVm1/KjlsVGHRwDAFD7Gl6HhGymxhXJJuNTh+le4ruw
 f5KLpUI9mEEmST6NfKqj+8Ozd3q8c1EHD0baKupIeTaherWi/sD9DpnMli4efrUj
 CkrBPqgxScxauuYAbMjRmKJgICRzNMJAsKX57q8s0TjhWyAfoTKIPWHUpSjAeDRE
 1pWblV0WZWFErMmdHllINFtFYl+XBCi/1qp2t8AYA06DPnBrY2s/eY9pxih0G7nB
 tzNkqWTwMAJ7PYOzDA7mv80n2Q2zjqJV55dzjRRehA3XSuP920qFVMVShSYv28O6
 fh8t84rdqfvFMSnQy6zHaxGEJIwaH9C6aFM8MGak2WLI1EYLIxVi79qf+T3iMbdj
 gkKvt5m4kF7Ul8nB/7Az7nNH1JdHgVRXLIzo+lam4AdYccONvVI=
 =cmt7
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20230131' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- jethub j100: add rescue boot from microSD
- move meson sm command to cmd/meson and add efusedump sub-command
- switch dwc2 otg to DM for G12A, GXL & AXG
- Add new boards:
 - Odroid Go Ultra
 - Odroid-N2L
2023-01-31 10:15:39 -05:00
Ashok Reddy Soma
a1f8abf468 mmc: zynq_sdhci: Add support and quirk for HS400
Add support for HS400 in mode2timing array.
Add a quirk for Versal NET platform to indicate that HS400 is supported
through bit63 of capability register.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
2023-01-31 22:02:27 +09:00
Ashok Reddy Soma
386f5d3673 mmc: sdhci: Enable HS400 support if available in caps
HS400 is indicated in bit63 of capability register in few IP's.
Add a quirk to check this and add HS400 to host capabilities.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
2023-01-31 22:02:27 +09:00
Ashok Reddy Soma
6f5bb9913c mmc: sdhci: Check and call config_dll callback functions
Check if the low level driver supports config_dll callback function and
call it if it does. Call with dll disable before calling set_clock and
with dll enable after it.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
2023-01-31 22:02:27 +09:00
Ashok Reddy Soma
14ef4c7be5 mmc: zynq_sdhci: Add support for eMMC5.1 for Versal NET platform
Add support for eMMC 5.1 for Versal NET platform
 - Add new compatible string(xlnx,versal-net-5.1-emmc).
 - Add CONFIG_ARCH_VERSAL_NET condition wherever required.
 - Add DLL and Delay Chain mode support
 - Add input and output tap delays for eMMC.
 - Add Strobe select tap for HS400 mode.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
2023-01-31 22:02:27 +09:00
Marek Vasut
cf1f7355ae cmd: mmc: Expand bkops handling
Add more capable "bkops" command which allows enabling and disabling both
manual and automatic bkops. The existing 'mmc bkops-enable' subcommand is
poorly named to cover all the possibilities, hence the new-ish subcommand.
Note that both commands are wrappers around the same common code.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-01-31 22:02:27 +09:00
Loic Poulain
ad725073d1 serial: mxc: Speed-up character transmission
Instead of waiting for empty FIFO condition before writing a
character, wait for non-full FIFO condition.

This helps in saving several tens of milliseconds during boot
(depending verbosity).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:02 +01:00
Loic Poulain
7150f56a85 serial: mxc: Wait for TX completion before reset
The u-boot console may show some corrupted characters when
printing in board_init() due to reset or baudrate change
of the UART (probe) before the TX FIFO has been completely
drained.

To fix this issue, and in case UART is still running, we now
try to flush the FIFO before proceeding to UART reinitialization.
For this we're waiting for Transmitter Complete bit, indicating
that the FIFO and the shift register are empty.

flushing has a 4ms timeout guard, which is normally more than
enough to consume the FIFO @ low baudrate (9600bps).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:02 +01:00
Marek Vasut
910c7a881f pmic: pca9450: Make warm reset on WDOG_B assertion
The default configuration of the PMIC behavior makes the PMIC
power cycle most regulators on WDOG_B assertion. This power
cycling causes the memory contents of OCRAM to be lost.
Some systems neeeds some memory that survives reset and
reboot, therefore this patch is created.

The implementation is taken almost verbatim from Linux commit
2364a64d0673f ("regulator: pca9450: Make warm reset on WDOG_B assertion")

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-01-30 23:23:01 +01:00
Marek Vasut
6e0ca0658e ddr: imx: Handle both 3733 and 3732 MTps rates
The DDR calibration tool for i.MX8M currently produces 3732 MTps rate in
lpddr4_timing.c , while the PHY code expects 3733 MTps rate. Support both
variants to avoid surprises where the system fails to boot.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-30 21:02:27 +01:00
Mark Kettenis
e330c8b83e usb: xhci: Fix root hub descriptor
When a system has multiple XHCI controllers, some of the
properties described in the descriptor of the root hub (such as
the number of ports) might differ between controllers.  Fix this
by switching from a single global hub descriptor to a hub
descriptor per controller.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2023-01-27 14:47:58 -05:00
Mark Kettenis
bdebb00d83 pci: Add Apple PCIe controller driver
This driver supports the PCIe controller on the Apple M1 and
M2 SoCs.  The code is adapted from the Linux driver.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-01-27 14:47:58 -05:00
Mark Kettenis
1fc2329121 iommu: Implement mapping IOMMUs for PCI devices
Systems such as Apple's M1 and M2 SoCs may have separate IOMMUs
for each PCIe root port.  In this case the right IOMMU for a
PCI device behind a particular root port is described by an
"iommu-map" property in the device tree.  Parse this property
and use it to find the right IOMMU device for PCI devices.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-01-27 14:47:58 -05:00
Mark Kettenis
ba1efb3d24 usb: xhci: Implement DMA mapping
An XHCI controller that sits behind an IOMMU needs to map and unmap
its memory buffers to do DMA.  Implement this by inroducing new
xhci_dma_map() and xhci_dma_unmap() helper functions.  The
xhci_dma_map() function replaces the existing xhci_virt_to_bus()
function in the sense that it returns the bus address in the case
of simple address translation in the absence of an IOMMU.  The
xhci_bus_to_virt() function is eliminated by storing the CPU
address of the allocated scratchpad memory in struct xhci_ctrl.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2023-01-27 14:47:58 -05:00
Mark Kettenis
862b4a0f32 iommu: apple: Implement DMA mapping operations for Apple DART
Implement translation table support for all the variations of
Apple's DART IOMMU that can be found on Apple's M1 and M2 SoCs.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-01-27 14:47:58 -05:00
Mark Kettenis
49a1a4becb test: Add test for IOMMU uclass map/unmap ops
Test that the map and unmap operations work for devices that
have DMA translated by an IOMMU and devices that don't have
DMA translated by an IOMMU.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-27 14:47:58 -05:00
Mark Kettenis
dd6b68ed4f iommu: Add DMA mapping operations
In order to support IOMMUs in non-bypass mode we need device ops
to map and unmap DMA memory.  The map operation enters a mapping
for a region specified by CPU address and size into the translation
table of the IOMMU and returns a DMA address suitable for
programming the device to do DMA.  The unmap operation removes
this mapping from the translation table of the IOMMU.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-01-27 14:47:57 -05:00
Mark Kettenis
053827b3c3 serial: s5p: Use IS_ENABLED where appropriate
There are no SPL/TPL variants of CONFIG_CLK_EXYNOS and
CONFIG_ARCH_APPLE, so switch from CONFIG_IS_ENABLED to
IS_ENABLED.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-27 14:32:55 -05:00
Michael Walle
e71505fc98 pinctrl: fix docstring
Fix the copy and paste error.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-27 12:51:26 -05:00
Michael Walle
75013fa724 pinctrl: get rid of some ifdeffery
Don't define an empty version for pinconfig_post_bind(). Just guard the
call and let the linker garbage collection do the rest. This way, we
also don't have to do any guesswork.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Marek Vasut <marex@denx.de>
2023-01-27 12:51:26 -05:00
Michael Walle
72b8c6d1eb pinctrl: don't fall back to pinctrl_select_state_simple()
If CONFIG_PINCTRL_FULL is enabled, never fall back to the simple
implementation. pinctrl_select_state() is called for each device and it
is expected to fail. A fallback to the simple imeplementation doesn't
make much sense.

To keep the return code consistent, we need to change the -EINVAL (which
was ignored before) to -ENOSYS.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-27 12:51:26 -05:00
Tom Rini
9ddbd70ff9 Xilinx chnages for v2023.04-rc1
makefile:
 - Add multi_dtb_fit dependency
 
 clk:
 - Handle error cases
 
 microblaze:
 - Disable falcon mode and cleanup code around
 
 xilinx:
 - Enable regular expression matching in board_fit_config_name_match()
 - Fix FRU handling for 0xC1 format
 - Fix Xilinx legacy format eeprom parsing
 
 zynqmp:
 - Some DT updates/cleanups
 - Fix IDcode for xck24
 - Remove empty mini config files
 - Add support for k24
 
 versal:
 - Remove empty mini config files
 
 versal_net:
 - Setup timer when runs in EL3
 - Build u-boot.elf for mini configurations
 
 zynq-gem:
 - Add support for new compatible strings
 - Remove support for Avnet Ultrazedev SOM
 - Handle SGMII with PCS phy
 
 spi:
 - Add support for gigadevice parts
 
 misc:
 - Remove CONFIG_TARGET_VENUS ifdef
 - Add missing headers to remove sparse warnings
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCY9PmzwAKCRDKSWXLKUoM
 IYWxAJwNgiXtFT17pBy+1M0JvSWgyvWF3QCfTQG2Krnw0+d65PF5A7UFTDL7SZM=
 =cMrc
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx chnages for v2023.04-rc1

makefile:
- Add multi_dtb_fit dependency

clk:
- Handle error cases

microblaze:
- Disable falcon mode and cleanup code around

xilinx:
- Enable regular expression matching in board_fit_config_name_match()
- Fix FRU handling for 0xC1 format
- Fix Xilinx legacy format eeprom parsing

zynqmp:
- Some DT updates/cleanups
- Fix IDcode for xck24
- Remove empty mini config files
- Add support for k24

versal:
- Remove empty mini config files

versal_net:
- Setup timer when runs in EL3
- Build u-boot.elf for mini configurations

zynq-gem:
- Add support for new compatible strings
- Remove support for Avnet Ultrazedev SOM
- Handle SGMII with PCS phy

spi:
- Add support for gigadevice parts

misc:
- Remove CONFIG_TARGET_VENUS ifdef
- Add missing headers to remove sparse warnings
2023-01-27 10:15:39 -05:00
Stefan Roese
a33ad8051e net: zynq_gem: Wait for SGMII PCS link in zynq_gem_init()
In our system using ZynqMP with an external SGMII PHY it's necessary
to wait for the PCS link and auto negotiation to finish before the xfer
starts. Otherwise the first packet(s) might get dropped, resulting in a
delay at the start of the ethernet transfers.

This is only done when the PHY link is already up, which is done in
phy_startup(). As waiting for the PHY link bits via pcsstatus does not
make much sense, when the link is not available in general (e.g. no
cable connected).

This patch adds the necessary code including a minimal delay of 1 ms
which fixes problems of dropped first packages.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Katakam Harini <harini.katakam@amd.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20230125070908.1343256-1-sr@denx.de
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-27 08:47:37 +01:00
Algapally Santosh Sagar
b387c25824 drivers: mmc: Change datatype of tuning_loop_counter to int
tuning_loop_counter is of char type, which is not capable of handling
the entire data range of this variable. This is pointed by below sparse
warning. Change datatype to int to fix this.
warning: comparison is always false due to limited range of data type.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230120053617.32463-5-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-27 08:42:47 +01:00
Algapally Santosh Sagar
508e1aa58c gpio: zynqmp: Handle error from get_gpio_modepin
There is a unused variable ret, due to which we are getting sparse warning
as below.
warning: variable 'ret' set but not used [-Wunused-but-set-variable].

Return ret incase of error.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230120053617.32463-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-27 08:42:47 +01:00
Tom Rini
b3b6cc28c2 FIT improvements with split-elf, especially for Rockchip
Binman positioning by ELF symbol
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmPTNLgRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreagiwgAr1Q+8qPghgomUK9cVjBuNzG2i88YWy7/
 oitshEE73lm92kP4YIQrSm1ZBy6mm0A0wyy4pRLC0fFrovzAWq1o7xfUEkuhxyTV
 pR7BiLPGUsHfL1cP4EuGSNMgrfX0QOddQgZTns4s7k4fbrFBLmTTa/+1jrU3AJNW
 1FVfVSc4eMqHM5gD7mfqSHRsxrbZDHpzbJEKIMS1xkVy/BSQbDWtF1f6Lri3M9VT
 Q7eNxFH5OptRAttcQreVNSNu28z00x0TuJNKLORXJa5AAxGW4yvNWgDFegU10NZc
 ADTKaNDsDz4D//Ar3PSt+10eGWWKqrY9ClQwls4lJmJJTIqldf+QDw==
 =l2A4
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-26jan23' of https://source.denx.de/u-boot/custodians/u-boot-dm

FIT improvements with split-elf, especially for Rockchip
Binman positioning by ELF symbol
2023-01-26 21:57:38 -05:00
Tom Rini
b6904cc98a Merge https://source.denx.de/u-boot/custodians/u-boot-spi
- fix return code of sf command (Heinrich)
- fix register reads in STIG Mode (Dhruva)
- Infineon s25fs256t support (Takahiro)
2023-01-26 13:07:06 -05:00
Samuel Holland
c2e13aa9e1 dm: core: Use full printf() format when possible
Use a more accurate check for determining if the full format string will
be handled correctly, since SPL_USE_TINY_PRINTF can be disabled.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-26 10:47:45 -07:00
Takahiro Kuwano
87a6d86571 mtd: spi-nor: Add support for Infineon s25fs256t
Infineon S25FS256T is 256Mbit Quad SPI NOR flash. The key features and
differences comparing to other Spansion/Cypress flash familes are:
  - 4-byte address mode by factory default
  - Quad mode is enabled by factory default
  - Supports mixture of 128KB and 64KB sectors by OTP configuration
    (this patch supports uniform 128KB only)

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-01-26 21:07:45 +05:30
Takahiro Kuwano
eadaadbb8f mtd: spi-nor: Rename s25hx_t prefix
Rename s25hx_t prefix to s25 so that the single set of fixup hooks can
support all other S25 families.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Acked-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-01-26 21:07:16 +05:30
Dhruva Gole
53f4ef0a4b spi: cadence_qspi: use STIG mode for small reads
Fix the issue where some flash chips like cypress S25HS256T return the
value of the same register over and over in DAC mode.

For example in the TI K3-AM62x Processors refer [0] Technical Reference
Manual there is a layer of digital logic in front of the QSPI/OSPI
Drive when used in DAC mode. This is part of the Flash Subsystem (FSS)
which provides access to external Flash devices.

The FSS0_0_SYSCONFIG Register (Offset = 4h) has a BIT Field for
OSPI_32B_DISABLE_MODE which has a Reset value = 0. This means, OSPI 32bit
mode enabled by default.

Thus, by default controller operates in 32 bit mode causing it to always
align all data to 4 bytes from a 4byte aligned address. In some flash
chips like cypress for example if we try to read some regs in DAC mode
then it keeps sending the value of the first register that was requested
and inorder to read the next reg, we have to stop and re-initiate a new
transaction.

This causes wrong register values to be read than what is desired when
registers are read in DAC mode. Hence if the data.nbytes is very less
then prefer STIG mode for such small reads.

[0] https://www.ti.com/lit/ug/spruiv7a/spruiv7a.pdf

Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
[jagan: add tab space for comments]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-01-26 21:01:56 +05:30
Dhruva Gole
2330af2722 spi: cadence_qspi: setup ADDR Bits in cmd reads
Setup the Addr bit field while issuing register reads in STIG mode. This
is needed for example flashes like cypress define in their transaction
table that to read any register there is 1 cmd byte and a few more address
bytes trailing the cmd byte. Absence of addr bytes will obviously fail
to read correct data from flash register that maybe requested by flash
driver because the controller doesn't even specify which address of the
flash register the read is being requested from.

Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-01-26 21:01:01 +05:30
Takahiro Kuwano
da16d72efd mtd: spi-nor-core: Make CFRx reg fields generic
Cypress defines two flavors of configuration registers, volatile and
non volatile, and both use the same bit fields. Rename the bitfields in
the configuration registers so that they can be used for both flavors.

Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-01-26 20:58:09 +05:30
Kunihiko Hayashi
358f803ae2 spi: Add Socionext F_OSPI SPI flash controller driver
Introduce Socionext F_OSPI controller driver. This controller is used to
communicate with slave devices such as SPI flash memories. It supports
4 slave devices and up to 8-bit wide bus, but supports master mode only.

This driver uses spi-mem framework for SPI flash memory access, and
can only operate indirect access mode and single data rate mode.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-01-26 20:53:20 +05:30
Pengfei Fan
730fcadc67 drivers: spi: sh_qspi.c: Use log_warning() instead of printf()
Use log_warning() instead of printf() to print out driver information

Signed-off-by: Pengfei Fan <fanpengfei1@eswincomputing.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-01-26 20:53:20 +05:30
Pengfei Fan
d466f6209d drivers: spi: fix some typos
Fix some typos in spi drivers

Signed-off-by: Pengfei Fan <fanpengfei1@eswincomputing.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2023-01-26 20:53:20 +05:30
Tony Dinh
54a08c4139 ddr: marvell: a38x: Add support for DDR4 from Marvell mv-ddr-marvell repository
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git

up to the commit "mv_ddr: a3700: Use the right size for memset to not overflow"
d5acc10c287e40cc2feeb28710b92e45c93c702c

This patch was created by following steps:

	1. Replace all a38x files in U-Boot tree by files from upstream github
	Marvell mv-ddr-marvell repository.

	2. Run following command to omit portions not relevant for a38x, ddr3, and ddr4:

	files=drivers/ddr/marvell/a38x/*
	unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_APN806 \
		-UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \
		-UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \
		-UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DCONFIG_ARMADA_38X -UCONFIG_ARMADA_39X \
		-UCONFIG_64BIT $files

	3. Manually change license to SPDX-License-Identifier
	(upstream license in  upstream github repository contains long license
	texts and U-Boot is using just SPDX-License-Identifier.

After applying this patch, a38x, ddr3, and ddr4 code in upstream Marvell github
repository and in U-Boot would be fully identical. So in future applying
above steps could be used to sync code again.

The only change in this patch are:
	1. Some fixes with include files.
	2. Some function return and basic type defines changes in
	mv_ddr_plat.c (to correct Marvell bug).
	3. Remove of dead code in newly copied files (as a result of the
	filter script stripping out everything other than a38x, dd3, and ddr4).

Reference:
    "ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository"
    107c3391b9

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-01-26 07:30:20 +01:00
Tom Rini
17e8e58fe6 Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi
This contains some fixes, and the first bunch of some clean up patches
to get rid of legacy GPIO and PMIC code.
Highlight is the DM AXP PMIC driver, which is required to convert some
drivers over to use DM regulators, and also is required to get rid
of some less optimal PMIC setup code in Trusted Firmware. This isn't
enabled by any defconfig yet, but can be enabled manually and works. For
the full glory some patches are still missing, and this requires more
testing, which would be simpler if the core code is upstream.
2023-01-24 21:07:01 -05:00
Michal Simek
988b3fa08d soc: zynqmp: Fix IDcode for xck24
ID code was added by commit ddf8deabc3 ("arm64: zynqmp: Add support for
SVD devices") based on documentation but after receiving part new ID code
came up. That's why fix IDcode to match xck24 module.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7b39aeeec211458ba4132a10beb7ad295eedb87f.1674030324.git.michal.simek@amd.com
2023-01-24 13:55:05 +01:00
Simon Glass
eacc261178 bootstd: Add a new pre-scan priority for bootdevs
We need extensions to be set up before we start trying to boot any of the
bootdevs. Add a new priority before all the others for tht sort of thing.
Also add a 'none' option, so that the first one is not 0.

While we are here, comment enum bootdev_prio_t fully and expand the test
for the 'bootdev hunt' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
0c1f4a9fb1 bootstd: Add a SPI flash bootdev
Add a bootdev for SPI flash so that these devices can be used with
standard boot. It only supports loading a script.

Add a special case for the label, since we want to use "spi", not
"spi_flash".

Enable the new bootdev on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
2b3ebf2013 ata: Don't try to use non-existent ports
The controller indicates the number of ports but also has a port map
which specifies which ports are actually valid. Make use of this to
avoid trying to send commands to an invalid port.

This avoids a crash on some controllers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
a60f7a3e35 bootstd: Add a virtio bootdev
Add a bootdev for virtio so that these devices can be used with standard
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
00fc8cade8 virtio: Add a block device
The test code for virtio is fairly simplistic and does not actually create
a block device. Add a way to specify the device type in the device tree.
Add a block device so that we can do more testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
902400201d virtio: Avoid strange behaviour on removal
This device does a check on removal which is better handled in the actual
test. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
811c81e889 virtio: Fix returning -ENODEV
This has a special meaning in driver model. There is clearly a device, so
it does not make sense to return this error code. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
59a6be9b11 virtio: Avoid repeating a long expression
Use a local variable to hold this name, to reduce the amount of code that
needs to be read.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
758c706c68 bootstd: Add an NVMe bootdev
Add a bootdev for NVMe so that these devices can be used with standard
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
0d77f8f1ca bootstd: Add an IDE bootdev
Add a bootdev for IDE so that these devices can be used with standard
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
8f090b67d0 bootstd: Add a SCSI bootdev
Add a bootdev for SCSI so that these devices can be used with standard
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
6febc26471 scsi: Remove all children of SCSI devices before rescanning
At present this only unbinds block devices of a certain type. But SCSI
device can have different types of children, including bootdevs.

Unbind all children so tht everything is clean and ready for a new scan.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
ca93d28171 scsi: Correct allocation of block-device name
This should be allocated so that it does not go out of scope. Fix this and
set the log category while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
843160fa7a bootstd: Add an MMC hunter
Add a hunter for MMC. This doesn't do anything at present, since MMC is
currently set up when U-Boot starts. If MMC moves to lazy init then we can
add a hunter function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
04fb2b6e45 bootstd: Add a USB hunter
Add a hunter for USB which enumerates the bus to find new bootdevs.

Update the tests and speed up bootdev_test_prio() while we are here, by
dropping the USB delays.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
ecdf3ab01f dm: usb: Mark the device name as alloced when binding
Since usb_find_and_bind_driver() allocates the device name it should tell
driver about that, to avoid memory leaks. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
b85fc8dbab bootstd: Add a default method to get bootflows
The code in these functions turns out to often be the same. Add a default
get_bootflow() function and allow the drivers to select it by setting
the method to NULL.

This saves a little code space.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
3a2cb96e5d dm: mmc: Use bootdev_setup_sibling_blk()
At present MMC uses the bootdev_setup_for_dev() function to set up the
bootdev. This is because MMC only has one block-device child, so does not
need to worry about naming of the bootdev.

However this inconsistency with other bootdevs that use block devices is a
bit annoying. The only real reason for it is to have a name like
'mmc0.bootdev' instead of 'mmc0.blk.bootdev'.

Update bootdev_setup_sibling_blk() to drop '.blk' from the name where it
appears, thus removing the only reason to use the bootdev_setup_for_dev().
Switch MMC over to the subling function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
d0075059e4 ide: Drop non-DM code for BLK
We require CONFIG_BLK to be enabled now, so this code is unused. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
67bb973122 sandbox: mmc: Start off with a zeroed file
When running multiple tests the mmc emulator calls malloc() to obtain the
memory for its disk image. Since the memory is not cleared, it is possible
that it happens to contain a partition table.

The dm_test_part() test (for one) relies on mmc0 being empty on startup.
Zero the memory to ensure that it is.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
3d01254140 dm: core: Support sorting devices with dm tree
Add a -s flag to sort the top-level devices in order of uclass ID.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Jernej Skrabec
cd108f2795 video: sunxi: dw-hdmi: Read address from DT node
Currently HDMI controller MMIO address is hardcoded. Change that so
address is read from DT node. That will make adding support for new
variants a bit easier.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
2023-01-23 01:18:31 +00:00
Jernej Skrabec
2f52be8b8d video: sunxi: dw-hdmi: Probe driver by compatible
Currently the sunxi dw-hdmi driver is probed unconditionally,
even if there is no such device.

Switch the driver to probing via a compatible string. This brings many
benefits; the driver is only probed when needed, and now it can read the
DT node.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
2023-01-23 01:18:31 +00:00
Samuel Holland
77024aa7d9 clk: sunxi: Add DE2 display-related clocks/resets
Add clock/reset definitions for display-related peripherals, including
the display engine, TCONs, and DSI and HDMI encoders, so those drivers
can be converted to DM clock consumers instead of directly manipulating
the CCU registers.

Signed-off-by: Samuel Holland <samuel@sholland.org>
2023-01-23 01:18:31 +00:00
Samuel Holland
55ad509c11 power: pmic: axp: Bind regulators from the DT
Now that a regulator driver exists for this PMIC, hook it up to the
device tree "regulators" subnodes.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-01-23 01:18:31 +00:00
Samuel Holland
27a93dd4a9 power: regulator: Add a driver for AXP PMIC regulators
This driver handles most voltage regulators found in X-Powers AXP PMICs.
It is based on, and intended to replace, the regulator driver in TF-A.

AXP PMIC regulators can be divided into 6 categories:
 - Switches without voltage control => fully supported.
 - Single linear range => fully supported.
 - Two linear ranges, "step" and "2 * step" => fully supported.
 - Two linear ranges, "step" and "5 * step" => only the first range is
   supported. No boards are known to use the second range.
 - Non-linear voltage values => fully supported.
 - LDOs shared with GPIO pins => not supported.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-01-23 01:18:31 +00:00
Samuel Holland
dc1b1d1458 power: pmic: axp: Provide a variant ID in the driver data
Subordinate regulator drivers can use this enumerated ID instead of
matching the compatible string again.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-01-23 01:18:31 +00:00
Andre Przywara
ba16b53101 sunxi: mmc: group non-DM specific functions
As the SPL code for sunxi boards does not use the driver model, we have
two mmc_ops structures, one for DM, one for non-DM. The actual hardware
access code is shared, with the respective callback functions using that
common code.

To make this more obvious and easier to read, reorder the functions to
group them: we first have the common code, then the non-DM bits, and
the proper DM implementation at the end.
Also document this structure in the comment at the beginning of the file.

No functional change intended.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2023-01-21 01:32:23 +00:00
Andre Przywara
5db81f1cc8 sunxi: mmc: ignore card detect in SPL
The sunxi MMC code does not use the DM in the SPL, as we don't have a
device tree available that early, also no space for it.
This also means we cannot access the card-detect GPIO information from
there, so we have Kconfig symbols called CONFIG_MMCx_CD_PIN, which each
board has to define. This is a burden, also requires extra GPIO code in
the SPL.
As the SPL is the natural successor of the BootROM (from which we are
loaded), we can actually ignore the CD pin completely, as this is what
the BootROM does as well: CD GPIOs are board specific, but the BootROM
is not, so accesses the MMC devices anyway.
Also, as we must have been loaded from an MMC device when reaching this
code, there must have been a card in the slot.

Remove the card detect code from the non-DM implementation of the sunxi
MMC driver, to get rid of this unneeded code.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2023-01-21 01:32:23 +00:00
Tom Rini
6e7df1d151 global: Finish CONFIG -> CFG migration
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00
Tom Rini
ad24234468 watchdog: Clean up defaults for imx_watchdog / ulp_wdog
In imx_watchdog, clean up the comment to just note the range now, as we
do not need to set the default here as Kconfig does this for us. For
ulp_wdog, set the default value via Kconfig instead.

Cc: Stefan Roese <sr@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-01-20 12:27:23 -05:00
Tom Rini
c50c778ea7 usbtty: Remove default CONFIG_USBD_* values
For this legacy driver, the only user sets these values in Kconfig, so
we can remove them from the header.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:23 -05:00
Tom Rini
89c90cadf3 nxp: Finish migration of SYS_FSL_IFC_BANK_COUNT to Kconfig
As this is used on both ARM and PowerPC platforms, this needs to be
asked in arch/Kconfig.nxp.  Set the PowerPC defaults based on
arch/powerpc/include/asm/config_mpc85xx.h and remove the default set in
drivers/mtd/nand/raw/fsl_ifc_nand.c

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Tom Rini
bd22bde92e net: phy: mv88e61xx: Finish migration of MV88E61XX_FIXED_PORTS
Set the default for MV88E61XX_FIXED_PORTS to 0x0 in Kconfig, and move
the comment from code to the help to explain what this does.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-20 12:27:06 -05:00
Tom Rini
8de73b7bc1 usb: musb: Rename CONFIG_USB_MUSB_TIMEOUT to MUSB_TIMEOUT
This variable has never been configured to another value at present, and
was not converted to Kconfig. Opt instead to rename this to
MUSB_TIMEOUT.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2023-01-20 12:27:06 -05:00
Tom Rini
8fe042be9a fpga: Migrate CONFIG_MAX_FPGA_DEVICES to Kconfig
This is always defined to 5, so use that as the default.

Cc: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
2023-01-20 12:27:06 -05:00
Tom Rini
81451a3985 i2c: fsl_i2c: Rework usage of CONFIG_SYS_IMMR
This driver is used on both m68k, where CONFIG_SYS_IMMR is not used, and
PowerPC an ARM where it is. Abstract this to a new value rather than
re-defining a CONFIG symbol on m68k.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Tom Rini
a3fda0d30a global: Remove unused CONFIG defines
Remove some CONFIG symbols and related comments, etc, that are unused
within the code itself at this point.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Neil Armstrong
043a9674b6 usb: dwc3-meson-gxl: force mode on child add/removal
arch/mach-meson has some custom usb logic, in particular:
* on board_usb_init(), we force USB_DR_MODE_PERIPHERAL
* on board_usb_cleanup(), we force USB_DR_MODE_HOST

With DM_USB_GADGET=y, board_usb_init/cleanup() are no
longer used when we call usb_gadget_initialize().
Instead, the generic (from udc-uclass) initialization/release is
called, which itself calls the controller driver's probe()/remove().

Therefore, enabling DM_USB_GADGET=y will mean that this mode
switching will break.

To prepare for enabling DM_USB_GADGET, perform the mode switching
when the "amlogic,meson-g12a-usb" (dwc2) driver is
probed()/removed() instead.

This is achieved via the glue driver, which gets notified each time one
of its children is probed()/removed.

Note: this change should be harmless without DM_USB_GADGET=y
because the amlogic-g12a-usb driver is not probed via driver model.

Thanks for Mattijs for the original work at [1].

[1] https://lore.kernel.org/all/20221024-meson-dm-usb-v1-1-2ab077a503b9@baylibre.com/

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230117-u-boot-usb-gxl-otg-dm-v1-1-2853f6d75b06@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-20 16:21:31 +01:00
Ilias Apalodimas
eda976d36a tee: optee: fix uuid comparisons on service discovery
When comparing UUIDs for discovered services we only compare up to the
ptr size instead of the entire UUID

Fixes: 94ccfb78a4 ("drivers: tee: optee: discover OP-TEE services")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
2023-01-20 10:04:56 +02:00
Ilias Apalodimas
9d28f67c81 tpm2: ftpm: add the device in the OP-TEE services list
commit fe8a4ed011 ("tee: optee: discover services dependent on tee-supplicant")
is trying to automatically scan and add TAs that are presented on pseudo
bus from the secure world.
In order to be able to list and compare the scanned devices the available drivers
have to register themselves on the op-tee service list.

Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-01-20 10:04:56 +02:00
Ilias Apalodimas
218a9917d6 tee: optee: fix a print error on rng probing
If we fail to probe the optee-rng device, we print a wrong message
referring to the firmware tpm.

Fixes: 476a3d58df ("tee: optee: don't fail probe because of optee-rng")
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-01-20 10:04:56 +02:00
Tom Rini
53c47c59e6 convert rockchip to use binman
patman fix for checkpatch
 binman optional entries, improved support for ELF symbols
 trace improvements
 minor fdt refactoring
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmPIpV4RHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZuqwgA0UpYQEX6/MegzHSCIx3AMT4rCF1Ytitr
 LS4Cbvj1Q09Rt9jriW7wAV5AobVPwGf2L5SVcnWv2I9+MmypDIXEe8HIrt2fRFu9
 bzn/2GOzXczuXqPFa/CWOUwjvCzTb8Sl9NtRszrP5NvOzuN15x00ZUYaXFO7fgsB
 zZMzOKxemwjdtLaox+x+VIJ95HMDEkYrWTAqTPg74CNVSjRbbLNqNq0zqkHB8SnH
 ubgphtIKYItTeIXcfIa9V4LeQp0ZitkzSfAibX+nIPCMPg9jbG9MrQQ+VvSZDjnM
 y8wa8gFj47Ek+gGNFXMHIpO6tBd83uHRgtf2x+zhcovLELYnZ6fDGw==
 =1K6m
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-18jan23' of https://source.denx.de/u-boot/custodians/u-boot-dm

convert rockchip to use binman
patman fix for checkpatch
binman optional entries, improved support for ELF symbols
trace improvements
minor fdt refactoring
2023-01-19 09:46:57 -05:00
Simon Glass
85d87112cb dm: pinctrl: Revert "pinctrl: probe pinctrl drivers during post-bind"
This breaks chromebook_coral and it is also not how things should work. If
a board needs to bind GPIOs as part of a pinctrl driver this can be done
during the bind step, if needed.

We cannot probe pinctrl devices when binding as a rule, since it cannot be
supported on some platforms.

The bind and probe steps are separate in U-Boot and they should remain
separate.

This reverts commit f9ec791b5e.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-18 11:49:13 -07:00
Jorge Ramirez-Ortiz
83d7a7af5d firmware: ti_sci: fix typo in boot authentication message name
Fix AUTH_BOOT message identifier (s/IMIAGE/IMAGE)

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Acked-by: Andrew Davis <afd@ti.com>
2023-01-18 13:11:13 -05:00
Andreas Kemnade
2e4865bc64 musb-new: omap2430: fix compiling in DM_USB_GADGET config
Add the separate IRQ handling function and change the registration.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
2023-01-18 12:46:13 -05:00
Andreas Kemnade
7a2d80efc3 musb-new: omap2430: no host data access in gadget mode
Avoid accessing structures (usb_bus_priv) only present when musb is
in host mode.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
2023-01-18 12:46:13 -05:00
Tom Rini
448e2b6327 event: Correct dependencies on the EVENT framework
The event framework is just that, a framework. Enabling it by itself
does nothing, so we shouldn't ask the user about it. Reword (and correct
typos) around this the option and help text. This also applies to
DM_EVENT and EVENT_DYNAMIC. Only EVENT_DEBUG and CMD_EVENT should be
visible to the user to select, when EVENT is selected.

With this, it's time to address the larger problems. When functionality
uses events, typically via EVENT_SPY, the appropriate framework then
must be select'd and NOT imply'd. As the functionality will cease to
work (and so, platforms will fail to boot) this is non-optional and
where select is appropriate. Audit the current users of EVENT_SPY to
have a more fine-grained approach to select'ing the framework where
used. Also ensure the current users of event_register and also select
EVENT_DYNAMIC.

Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reported-by: Oliver Graute <Oliver.Graute@kococonnector.com>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: 7fe32b3442 ("event: Convert arch_cpu_init_dm() to use events")
Fixes: 42fdcebf85 ("event: Convert misc_init_f() to use events")
Fixes: c5ef202557 ("dm: fix DM_EVENT dependencies")
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-18 12:46:13 -05:00
Tom Rini
5b958dea5c Merge branch '2022-01-16-bootstd-updates'
To quote the author:
So far standard boot lacks a boot menu, although it is possible to create
a rudimentary one using the existing 'bootmenu' command.

Even then, this text-based menu offer only basic functionality and does
not take full advantage of the displays which are common on many devices.

This series provides a 'bootflow menu' command which allows the user to
select from the available bootflows. An attempt is made to show the name
of the available operating systems, by reading more information into the
bootflow. A logo can be read also, where supported, so that this can be
presented to the user when an option is highlighted.

Full use is made of TrueType fonts, if enabled. For cases where only a
serial console is available, it falls back to a simple text-based menu.

All of this is implementing using a new 'expo' construct, a collection of
scenes (like menu screens) which can be navigated by the user to view
information and select options. This is fairly general and should be able
to cope with a wider array of use cases, with less hacking of the menu
code, such as is currently needed for CMD_BOOTEFI_BOOTMGR.

Of course it would be possible to enhance the existing menu rather than
creating a new setup. Instead it seems better to make the existing menu
use expo, if code space permits. It avoids the event-loop problem and
should be more extensible, given its loosely coupled components and use of
IDs instead of pointers. Further motivation is provided in the
documentation.

For now the CLI keypress-decoding code is split out to be used by the new
menu. The key codes defined by menu.h are reused also.

This is of course just a starting point. Some ideas for future work are
included in the documentation.
2023-01-17 08:55:40 -05:00
Tom Rini
6d03688e75 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- kirkwood: Convert to DM Serial for various Kirkwood boards (Tony)
- orion-timer: Fix problem in early_init_done() (Stefan)
2023-01-17 08:10:56 -05:00
Mattijs Korpershoek
fd083842d7 usb: dwc3-meson-g12a: force mode on child add/removal
arch/mach-meson has some custom usb logic, in particular:
* on board_usb_init(), we force USB_DR_MODE_PERIPHERAL
* on board_usb_cleanup(), we force USB_DR_MODE_HOST

With DM_USB_GADGET=y, board_usb_init/cleanup() are no
longer used when we call usb_gadget_initialize().
Instead, the generic (from udc-uclass) initialization/release is
called, which itself calls the controller driver's probe()/remove().

Therefore, enabling DM_USB_GADGET=y will mean that this mode
switching will break.

To prepare for enabling DM_USB_GADGET, perform the mode switching
when the "amlogic,meson-g12a-usb" (dwc2) driver is
probed()/removed() instead.

This is achieved via the glue driver, which gets notified each time one
of its children is probed()/removed.

Note: this change should be harmless without DM_USB_GADGET=y
because the amlogic-g12a-usb driver is not probed via driver model.

Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20221024-meson-dm-usb-v1-1-2ab077a503b9@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-17 09:27:17 +01:00
Stefan Roese
9a13a76e62 timer: orion-timer: Fix problem in early_init_done()
It was noticed that Clearfog is currently broken with this newly
introduced early_init_done() function. Apparently the timer is enabled
here when U-Boot is run but not configured - at least not correctly.
Resulting in a hangup in the timer reading functions.

To fix this, also read the value of the reload register and check it's
value with the one written to by U-Boot. Only if this matches, the
init has already been done.

Fixes: 5387b093cb ("timer: orion-timer: Fix problem with early static variable")
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Cc: Martin Rowe <martin.p.rowe@gmail.com>
Cc: Tony Dinh <mibodhi@gmail.com>
Cc: Pali Rohár <pali@kernel.org>
Cc: Michael Walle <michael@walle.cc>
2023-01-17 07:06:37 +01:00
Simon Glass
0e38bd848d video: Add font functions to the vidconsole API
Support for fonts currently depends on the type of vidconsole in use. Add
two new methods to enumerate fonts and to set the font.

Fix a few other method comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
7abe73fc14 video: truetype: Rename the metrics function
This should really have a 'truetype' prefix. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
72a0dd8bed video: Enable VIDEO_ANSI by default only with EFI
This is not generally needed unless EFI_LOADER is used. Adjust the default
setting to reduce the size of the U-Boot build.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
30f3333d88 image: Move common image code to image_board and command
We should use the cmd/ directory for commands rather than for common code
used elsewhere in U-Boot. Move the common 'source' code into
image-board.c to achieve this.

The image_source_script() function needs to call run_command_list()  so
seems to belong better in the command library. Move and rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Jay Buddhabhatti
29b58bba91 clk: versal: Return error in case if clock setup failed
Currently probe is getting success even if clock setup is failed
because of that u-boot is trying to access invalid clocks. So return
error if clock setup failed.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/fa78e71211e5f68f8dc1353b357f96e6283f65a8.1673335422.git.michal.simek@amd.com
2023-01-16 15:33:58 +01:00
Jagan Teki
a25338aa89 clk: rockchip: Add rv1126 clk support
Add clock driver support for Rockchip RV1126 SoC.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:11 +08:00
Jagan Teki
8430a87502 pinctrl: rockchip: Add rv1126 support
Add pinctrl driver for Rockchip RV1126.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:11 +08:00
Jagan Teki
32b2ea9818 pinctrl: rockchip: Add pinctrl route types
Some pins in rockchip are routed via Top GRF and PMU GRF
instead of direct regmap.

Add support to handle all these routing paths so that the
SoC pinctrl drivers will use them accordingly.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:11 +08:00
Jagan Teki
0900840b46 ram: rockchip: Add rv1126 lpddr4 support
Add LPDDR4 detection timings and support for RV1126.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:11 +08:00
Jagan Teki
4fadeecb62 ram: rockchip: rv1126: Control ddr init prints via DEBUG
Control the ddr init print messages via RAM_ROCKCHIP_DEBUG
instead of printing by default.

This gives an option to configs to enable these prints or
not.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Jagan Teki
e869b3485c ram: rockchip: Add rv1126 ddr driver support
Add DDR driver for Rockchip RV1126 SoC.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Jagan Teki
a70a62cd52 ram: rockchip: Add rv1126 ddr loader params
Add DDR loader parameters for Rockchip RV1126 SoC.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Jagan Teki
d04aa29fba ram: rockchip: Add rv1126 ddr3 support
Add DDR3 detection timings for Rockchip RV1126 SoC.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Jagan Teki
5ab30c3176 ram: rockchip: Update ddr pctl regs for px30
Add full ddr pctl registers and bit masks for px30.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Jagan Teki
29c3148974 ram: rockchip: Compute ddr capacity based on grf split
DDR chip capacity is computed based on GRF split in some
Rockchip SoC's like PX30 and RV1126.

Add split argument in ddr print info so-that the respective
ddr driver will pass the grf split.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Jagan Teki
26f92be07e ram: rockchip: Add common ddr type configs
We have common ddr types in rockchip or in general. So use
the common ddr type names instead of per Rockchip SoC to
avoid confusion.

The respective ddr type names will use on the associated
ddr SoC driver as these drivers are built per SoC at a time.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Jagan Teki
78276c5313 ram: Mark ram-uclass depend on TPL_DM or SPL_DM
ram-uclass is building irrespective of whether TPL_DM
or SPL_DM is enabled. So control the ram uclass build
based on TPL/SPL_DM.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Quentin Schulz
23b71addf9 rockchip: clk: add watchdog clock to px30_clk_enable
Add the PCLK_WDT_NS clock to px30_clk_enable so that the watchdog driver
can probe since it wants to enable this clock.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Mattijs Korpershoek
2383e8f4ae usb: gadget: dwc2_udc_otg: implement pullup()
Pullup is used by the usb framework in order to do software-controlled
usb_gadget_connect() and usb_gadget_disconnect().

Implement pullup() for dwc2 using the SOFT_DISCONNECT bit in the dctl
register:
* when pullup is on, clear SOFT_DISCONNECT
* when pullup is off, set SOFT_DISCONNECT

This is especially useful when a gadget disconnection is initiated but
no board_usb_cleanup() is called.

Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-01-14 14:10:30 +01:00
Dario Binacchi
66b5847b30 usb: gadget: fastboot: detach usb just before rebooting
The patch fixes the following error when updating a BSH SMM S2 board:
3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
3:72>Okay (0.023s)
3:72>Start Cmd:FB: reboot
3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)

The "fastboot reboot" command detaches the USB when it still needs to be
used. So let's detach the USB just before the reset.

CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Fixes: 5f7e01e9d5 ("usb: gadget: fastboot: detach usb on reboot commands")
Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2023-01-14 14:10:30 +01:00
Tom Rini
fe4c21de4f Add driver to manage onboard hub supplies
Add calibration support for stm32-adc
 Linux kernel v6.1 DT synchronization for stm32mp151.dtsi
 stm32mp157a-dk1-scmi-u-boot.dtsi update
 Add support of OP-TEE and STM32MP13x in bsec driver
 ECDSA various fixes for stm32mp
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmPBXKccHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pqAsD/9DhQqYRxCNdFmvchPq
 svu9qB/9lig27IjjLdnUQpIp2xbMH7ki90JrV9Bk6uet6+46mtNlddLhUjJmlEG3
 QQGJzEohYQO7T2RZ1PoHbgQMow/wkZn0Li0zDYW2FHlBdZP1Yd4c+rjiVyYg0oHZ
 z5B/QkXIIo5czVRixwU7RzERfHWbzRAVSJ9nqnchOZCt25gkTwfzoeOtdjg3/H48
 AmdMs4/z3Vcc4MkMAb3rQbPGCjrlzPEVSEPiGQrSNoVl7u6sRz24gJ0uoJV9NRY+
 8IsAHXMZ4agYUnBSilupTZDOwg9RzX1NammY7a9Fw5Ew0qI7YoolhsEoChBeBXGM
 IfH8MB5Jiw1aZpUL6bHX83OpVgpDl/yIZyfWniXQq7tDgwNq6NEtigyDnFr8Z4bS
 QuLmSCDprRM3OuhZTb6ZQBg4A4mRGU4ASOaVyb0kQ+x6zEVeklxi1EAYIVggKWem
 DimaSa2zqjWieYQy5JmhraH7Qnb4/OfgtXl9Yj3s1P1bI7kuuCSzJOeBl8Gv13pK
 kJQG73ar4CEg3hxTXtrrQ6Vl9ti0K2GGaeq2IZP7MJDSIKitgZIIc+b0jku0pfr8
 ep6Ecql1xVExYPqn4Y9pVT6YuuRy2M+ag3dbtBWv79h0oSZUuDFy8RZssHXYA/RB
 zzGwJT0N9U2Zm0VxTCz2wBioLQ==
 =SNID
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20230113' of https://source.denx.de/u-boot/custodians/u-boot-stm

Add driver to manage onboard hub supplies
Add calibration support for stm32-adc
Linux kernel v6.1 DT synchronization for stm32mp151.dtsi
stm32mp157a-dk1-scmi-u-boot.dtsi update
Add support of OP-TEE and STM32MP13x in bsec driver
ECDSA various fixes for stm32mp
2023-01-13 09:56:19 -05:00
Marek Vasut
48b3ecbedf gpio: Get rid of gpio_hog_probe_all()
The gpio_hog_probe_all() functionality can be perfectly well replaced by
DM_FLAG_PROBE_AFTER_BIND DM flag, which would trigger .probe() callback
of each GPIO hog driver instance after .bind() and thus configure the
hogged GPIO accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2023-01-12 14:06:16 -05:00
Quentin Schulz
942918f2ac dm: fix probing of all devices that have u-boot, dm-pre-reloc in SPL/TPL
Currently, dm_probe_devices checks that the flags of the device contains
DM_FLAG_PRE_RELOC. However DM_FLAG_PRE_RELOC is a driver - and not a
device - flag. This means that the check in pre_reloc_only mode would
always fail.

Instead, what was aimed to be checked is that either the driver of the
device has the flag set, or that the device has the u-boot,dm-pre-reloc
Device Tree property set.

So let's fix the check to allow u-boot,dm-pre-reloc devices to be
probed.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2023-01-12 14:06:16 -05:00
Sean Anderson
f4426fd68d net: fm: Support loading firmware from a filesystem
This adds a new method to load Fman firmware from a filesystem. This
allows users to use regular files instead of hard-coded offsets for the
firmware.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-12 14:06:16 -05:00
Sean Anderson
e4f0cc5ddf net: fm: Add firmware name parameter
In order to read the firmware from the filesystem, we need a file name.
Read the firmware name from the device tree, using the firmware-name
property. This property is commonly used in Linux to determine the
correct name to use (and can be seen in several device trees in U-Boot).

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-12 14:06:16 -05:00
Sean Anderson
0998a20cfc misc: fs_loader: Add function to get the chosen loader
The fs_loader device is used to pull in settings via the chosen node.
However, there was no library function for this, so arria10 was doing it
explicitly. This function subsumes that, and uses ofnode_get_chosen_node
instead of navigating the device tree directly. Because fs_loader pulls
its config from the environment by default, it's fine to create a device
with nothing backing it at all. Doing this allows enabling
CONFIG_FS_LOADER without needing to modify the device tree.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-12 14:06:15 -05:00
Kshitiz Varshney
0d795c356a Uboot RNG Driver using Data Co-processor
This commit introduces Random number generator to uboot. It uses DCP
driver for number generation.
RNG driver can be invoked by using below command on uboot prompt:-
           rng <number of bytes>

Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-12 11:25:46 -05:00
Olivier Moysan
17bae7766c adc: stm32mp15: add calibration support
Add support of offset and linear calibration for STM32MP15.
The calibration is performed once at probe. The ADC is set in power on
state for calibration. It remains in this state after calibration,
to give to the kernel the opportunity to retrieve calibration data,
directly from the ADC.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-01-12 16:25:51 +01:00
Fabrice Gasnier
ba1fa2abde usb: onboard-hub: add driver to manage onboard hub supplies
The main issue the driver addresses is that a USB hub needs to be
powered before it can be discovered. This is often solved by using
"regulator-always-on".

This driver is inspired by the Linux v6.1 driver. It only enables (or
disables) the hub vdd (3v3) supply, so it can be enumerated.
Scanning of the device tree is done in a similar manner to the sandbox,
by the usb-uclass. DT part looks like:

&usbh_ehci {
	...
	#address-cells = <1>;
	#size-cells = <0>;
	hub@1 {
		compatible = "usb424,2514";
		reg = <1>;
		vdd-supply = <&v3v3>;
	};
};

When the bus gets probed, the driver is automatically probed/removed from
the bus tree, as an example on stm32:
STM32MP> usb start
starting USB...
STM32MP> dm tree
 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 usb           0  [ + ]   ehci_generic          |   |-- usb@5800d000
 usb_hub       0  [ + ]   usb_onboard_hub       |   |   `-- hub@1
 usb_hub       1  [ + ]   usb_hub               |   |       `-- usb_hub

STM32MP> usb tree
USB device tree:
  1  Hub (480 Mb/s, 0mA)
  |  u-boot EHCI Host Controller
  |
  +-2  Hub (480 Mb/s, 2mA)

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-01-12 16:19:53 +01:00
Pali Rohár
3133651aa4 ata: Fix dependency for CONFIG_SATA_SIL
sata_sil.c is PCI driver and without CONFIG_PCI is building of U-Boot failing:

      LD      u-boot
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_exec_cmd':
    drivers/ata/sata_sil.c:148: undefined reference to `dm_pci_phys_to_bus'
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_pci_probe':
    drivers/ata/sata_sil.c:687: undefined reference to `dm_pci_get_bdf'
    ld.bfd: drivers/ata/sata_sil.c:691: undefined reference to `dm_pci_read_config16'
    ld.bfd: drivers/ata/sata_sil.c:701: undefined reference to `dm_pci_map_bar'
    ld.bfd: drivers/ata/sata_sil.c:704: undefined reference to `dm_pci_map_bar'
    ld.bfd: drivers/ata/sata_sil.c:713: undefined reference to `dm_pci_write_config16'
    ld.bfd: drivers/ata/sata_sil.c:717: undefined reference to `dm_pci_read_config16'
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_cmd_identify_device':
    drivers/ata/sata_sil.c:256: undefined reference to `dm_pci_phys_to_bus'
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_sata_rw_cmd':
    drivers/ata/sata_sil.c:330: undefined reference to `dm_pci_phys_to_bus'
    ld.bfd: drivers/ata/sata_sil.o: in function `sil_sata_rw_cmd_ext':
    drivers/ata/sata_sil.c:377: undefined reference to `dm_pci_phys_to_bus'
    make: *** [Makefile:1778: u-boot] Error 1

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-01-11 15:02:24 -05:00
Sean Anderson
f3d914cfdd fastboot: Add OEM run command
This adds the UUU UCmd functionality as an OEM command. While the
fastboot tool allows sending arbitrary commands as long as they are
prefixed with "oem". This allows running generic U-Boot commands over
fastboot without UUU, which is especially useful when not using USB.
This is really the route we should have gone in the first place when
adding these commands.

While we're here, clean up the UUU Kconfig a bit.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2023-01-11 15:02:24 -05:00
Patrick Delaunay
d037990046 fastboot: remove #ifdef CONFIG when it is possible
Much of the fastboot code predates the introduction of Kconfig and
has quite a few #ifdefs in it which is unnecessary now that we can use
IS_ENABLED() et al.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3l
2023-01-11 15:02:24 -05:00
Patrick Delaunay
59dacc3190 optee: bind the TA drivers on OP-TEE node
In U-Boot driver model the devices can be referenced by
phandle in the U-Boot configuration nodes.

Without a valid node provided during the bind, the driver
associated to OP-TEE TA can't be referenced.

For example to force the sequence number with alias
(.flags = DM_UC_FLAG_SEQ_ALIAS)

 	aliases {
		rng0 = &optee;
 	};

or other configuration:

board-sysinfo {
   compatible = "vendor,sysinfo-board";
   ramdom = <&optee>;
}

With this patch all drivers bound from OP-TEE service
discovery are now associated are associated to OP-TEE
node, allowing to identify by phandle the driver
provided by the TA for one UCLASS without modifying
device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-01-11 15:02:24 -05:00
Sean Anderson
46b2e5e92c reboot-mode: Add NVMEM reboot mode
This adds an NVMEM reboot mode driver, similar to Linux's
implementation. This allows using the same device tree binding for Linux
and U-Boot in most cases.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-11 11:54:50 -05:00
Sean Anderson
546795b579 rtc: abx8xx: Add support for reading RAM
This adds support for reading the battery-backed memory present on these
RTCs. This modifies the read/write methods to access the RAM instead of
raw register offsets. No one was using these in-tree, so we should be
fine changing them.

We use the "standard" address space window to access the RAM. The
extension RAM address register has some reserved bits, but we write the
whole thing for simplicity (as these bits default to 0).

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2023-01-11 11:54:50 -05:00
Jim Liu
7ee1c4d1d1 pinctrl: nuvoton: add NPCM7xx/NPCM8xx reset type detect
add reset type detect and persist setting.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-01-10 15:39:06 -05:00
Victor Lim
e72023c490 mtd: spi-nor-ids: add gigadevice part #
adding gigadevice part numbers

Signed-off-by: Victor Lim <vlim@gigadevice.com>
Link: https://lore.kernel.org/r/20230109234946.14540-2-vlim@gigadevice.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-10 12:37:02 +01:00
Michal Simek
4b422a12df net: zynq_gem: Add support for new compatible str with xlnx prefix
cdns prefix was deprecated and replaced by xlnx one.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7d1312d741349451b36558baa3e9132247303992.1670599167.git.michal.simek@amd.com
2023-01-10 08:15:54 +01:00
Tom Rini
cebdfc22da Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-09 11:30:08 -05:00
Tom Rini
fe33066d24 Pull request for u-boot-nand-20230108
- rawnand: omap_gpmc: driver model support
 -----BEGIN PGP SIGNATURE-----
 
 iQJYBAABCgBCFiEE6GOTDNYiFygVXvMmQBtB6IWRjvEFAmO6pUskHGRhcmlvLmJp
 bmFjY2hpQGFtYXJ1bGFzb2x1dGlvbnMuY29tAAoJEEAbQeiFkY7xo+kQAIRCr9c5
 DPOa+yFSFnSrEj6Ci+Csx0+VFef+pzUU3phu5T8HG8bCkKtMmPopau37coFhzty/
 87yQtVJoq5tMWdle8Lwg9SStYTjt2c9Vg6nZvNFaLDWkZm2zLJpgOB6KM+AIEvpG
 PLJ2nVYqwoaZbW3o1eHPescKl3A7vkMuUxIZ/3NJtKOezuqhR42nHyNDaGLMbI2o
 fvm17vc6gh07+ekR06frVOmUdxYbNcfEjCPLgf2fAqkAuBw17TB2akpDuTSYSck5
 QcIZqJeKwCJjCKEzOlXZHktiX3E1CohOcEcPBKlWPvNORokc/ghcHFvvT846FFqE
 VEZb0P/4lkvSCVBCwTbgnKtN1O8mN/lnHVMubQXWyP5ZK7PPn7BzyzOZfCm+Emdm
 41B2H2+3+IRhTY9uYPyPXnyTQ/pDUZ2i7EXIguUAWOaq6GE8w9ICty1c7pxnCG5+
 mm/4nhMrbQzQ7y4Snp1jZTcdvFczuBNFIEsSvOyHagXVCRHJi1/YT4L4t1mvUX5J
 VPnidkrdQFIJpfJadEk/D3E43XXyqKtFpHy1yn1cqqiDd/TIGUmcf9oAkT6wuUZf
 DoQjdRKJnr6nyPVfWF/cQ4c4qcDXvA5TIKztxrb/whaff+2I/vXW2QnV2YX3zyxt
 Ry6YvBOH0xYTWNmQ7uFecjkpeKhb4FrKuUUf
 =Agfn
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-nand-20230108' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next

Pull request for u-boot-nand-20230108

- rawnand: omap_gpmc: driver model support
2023-01-08 13:12:42 -05:00
Roger Quadros
7363cf0581 mtd: rawnand: omap_elm: u-boot driver model support
Support u-boot driver model. We still retain
support legacy way of doing things if ELM_BASE
is defined in <asm/arch/hardware.h>

We could completely get rid of that if all
platforms defining ELM_BASE get rid of that definition
and enable CONFIG_SYS_NAND_SELF_INIT and are verified
to work.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/all/20221220102203.52398-9-rogerq@kernel.org
Link: https://lore.kernel.org/all/CABGWkvrvKiVA_yaDnHJcHEKwc+pEuLdz=i6HQEY0oJQvohCUsw@mail.gmail.com
2023-01-08 10:38:50 +01:00
Roger Quadros
c2147bc7ec mtd: rawnand: omap_gpmc: Enable SYS_NAND_PAGE_COUNT for OMAP_GPMC
The symbol is required for NAND support in SPL when using
OMAP_GPMC driver.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-7-rogerq@kernel.org
2023-01-08 10:38:50 +01:00
Roger Quadros
b747090705 mtd: rawnand: omap_gpmc: Add SPL NAND support
Enables SPL NAND support for ARCH_K3 by enabling
SPL_NAND_INIT and SPL_SYS_NAND_SELF_INIT.

Legacy OMAP2plus platforms still rely on SPL_NAND_AM33XX_BCH
instead.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-6-rogerq@kernel.org
2023-01-08 10:38:50 +01:00
Roger Quadros
ff0d078942 mtd: rawnand: omap_gpmc: support u-boot driver model
Adds driver model support.

We need to be able to self initialize the NAND controller/chip
at probe and so enable CONFIG_SYS_NAND_SELF_INIT.

Doing so requires nand_register() API which is provided by nand.c
and needs to be enabled during SPL build via CONFIG_SPL_NAND_INIT.
But nand.c also provides nand_init() so we need to get rid of nand_init()
in omap_gpmc driver if CONFIG_SPL_NAND_INIT is set.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-5-rogerq@kernel.org
2023-01-08 10:38:50 +01:00
Roger Quadros
fa87360b3a mtd: rawnand: nand_base: Allow base driver to be used in SPL without nand_bbt
nand_bbt.c is not being built with the nand_base driver during SPL
build. This results in build failures if we try to access any nand_bbt
related functions.

Don't use any nand_bbt functions for SPL build.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-3-rogerq@kernel.org
2023-01-08 10:38:30 +01:00
Roger Quadros
04fcd25873 mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction
The BCH detection hardware can generate ECC bytes for multiple
sectors in one go. Use that feature.

correct() only corrects one sector at a time so we need to call it
repeatedly for each sector.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-2-rogerq@kernel.org
2023-01-08 10:33:20 +01:00
Tom Rini
b82f12b642 First set of u-boot-at91 features for the 2023.04 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmO2mnEcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyBAOB/4y7e9y0jdKSWDwMdZj
 enXK/U/GREFyuiSdadil0aJl9WfayjwZkh7uHSTj4pi9ApNivfoqsL7WZYpJxhRD
 WlpNhs3TZ70i8CgKUosdzcpquAQZUZhg6iV5DCObrK6yNJRGOXLIwMOd+vw/Xz6/
 YTGqzivEDMBuH/9HLuC0m+26PEpff8nenNEjC2k8ssG26ojLz7oCQh2HoHcSgNRc
 HkEYlFJ/Le8kM8Ak2F3ebmsfgMTnFrRVwV1BsZa5vO0BrMYgJCORsl7Cnfcw6/2N
 LEHG7kwlSorJeETn/gkLiZ+NyqzU+oFH0jGRZ5Ciqg1qcCO3k9yBMgWQzd7nTL6C
 5oZA
 =Ocdd
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2023.04-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2023.04 cycle:

This feature set includes the new DM-based NAND flash driver (old non-DM
driver is still kept for backwards compatibility), and the move to DM
NAND flash driver for sam9x60ek board. Feature set also includes
devicetree alignment for sama7g5 with Linux, devicetree alignment on USB
with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor
configs and tweaks.
2023-01-06 11:53:26 -05:00
Marek Vasut
bee3551e00 Revert "Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot""
This reverts commit ed6251187a.

Superseded by "cmd: pxe_utils: Limit fdtcontroladdr usage to non-fitImage"
which is less heavy-handed approach and retains part of the original
behavior for non-fitImage.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-06 08:14:19 -05:00
Dai Okamura
4671435c54 i2c: uniphier-f: correct error recovery
The uniphier i2c block can recognize some handshake errors.
But driver handles all error detections as no error if no timeout.
So this makes unrecoverable state.

This replaces the return values with the right ones to tell the i2c
framework the errors:
- EDEADLK for arbitration lost error
- ENODATA for no answer error

Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2023-01-06 08:14:19 -05:00
Sergiu Moga
61040097a9 reset: at91: Add reset driver for basic assert/deassert operations
Add support for at91 reset controller's basic assert/deassert
operations. Since this driver conflicts with the
SYSRESET driver because they both bind to the same RSTC node,
implement a custom bind hook that would manually bind the
sysreset driver, if enabled, to the same RSTC DT node.
Furthermore, delete the no longer needed compatibles from the
SYSRESET driver and rename it to make sure than any possible
conflicts are avoided.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2023-01-05 10:06:35 +02:00
Stefan Bosch
5745de2c9d arm: s5p4418: dm_serial: switch to DM_SERIAL
Switch the S5P4418-SOC and therefore the s5p4418_nanopi2 board to
DM_SERIAL.

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2023-01-02 16:06:08 -05:00
Stefan Bosch
5ec6cbcc7f arm: s5p4418: dm_serial: add driver source code
Add dm_serial driver source code for S5P4418 SOC. Extend the "arm,pl011"
driver by init of UART-clock and UART-reset.

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2023-01-02 16:06:08 -05:00
Lokanathan, Raaj
357c352cdc Add CONFIG_SYS_NAND_SELF_INIT to Kconfig for NAND DENALI driver
Add the CONFIG_SYS_NAND_SELF_INIT to the Kconfig to follow the changes from
mainline.

Signed-off-by: Lokanathan, Raaj <raaj.lokanathan@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
2023-01-02 16:01:40 -05:00
Pali Rohár
1138bbe05e serial: Use -EAGAIN in getc and putc
U-Boot serial code already handles -EAGAIN value from getc and putc
callbacks. So change drivers code to return -EAGAIN when HW is busy instead
of doing its own busy loop and waiting until HW is ready.

Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-02 16:01:40 -05:00
Pali Rohár
59440d83d3 serial: Do not write additional \r before \n for dm_serial drivers
serial-uclass.c code already puts \r before \n for all dm_serial drivers.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-02 16:01:40 -05:00
Sergei Antonov
fcb624be47 rtc: add ht1380 driver
Support Holtek HT1380/HT1381 Serial Timekeeper Chip. It provides seconds
, minutes, hours, day of the week, date, month and year information.

Datasheet:
https://www.holtek.com.tw/documents/10179/11842/ht1380_1v130.pdf

Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-02 16:01:40 -05:00
Dai Okamura
ef75d482aa pinctrl: uniphier: add ethernet TX pin data for PXs3
PXs3 Ref boards need to change the strength of ethernet ports
for stability, like LD20's one.

This adds the table data and fixes the boot issue on PXs3 Ref board.

Fixes: 0852033309 ("ARM: uniphier: sync with Linux 5.8-rc4")
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
2023-01-02 14:10:23 -05:00
Dai Okamura
1e91a0ea32 pinctrl: uniphier: add check if pins are valid
The pinctrl datas of uniphier SoCs are the minimal subsets of kernel's one,
and some tables has no data to save the footprint size.
If the board dts tries to match a pin name on no pins defined SoC,
the footprint magic code causes "Synchronous Abort".

This checks if the 'pins' data is valid,
and if empty, avoids the abort with the warning as follows:

  WARNING at drivers/pinctrl/uniphier/pinctrl-uniphier-core.c:36/uniphier_pinctrl_get_pins_count()!
  pinctrl_select_state_full: pinctrl_config_one: err=-38

Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
2023-01-02 14:10:23 -05:00
Stefan Roese
5387b093cb timer: orion-timer: Fix problem with early static variable
We've noticed that at least one Kirkwood board (Pogo v4) has problems
with the new orion DM timer implementation. Debugging revealed that this
issue is related with the static variable "early_init_done" which does
not work correctly before relocation in all cases.

This patch removes this static variable and replaces it's functionality
via a function that detects if the timer is already initialized.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Cc: Michael Walle <michael@walle.cc>
Cc: Tony Dinh <mibodhi@gmail.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
2023-01-02 09:14:16 +01:00
Sean Anderson
bcc85b96b5 cmd: source: Support specifying config name
As discussed previously [1,2], the source command is not safe to use with
verified boot unless there is a key with required = "images" (which has its
own problems). This is because if such a key is absent, signatures are
verified but not required. It is assumed that configuration nodes will
provide the signature. Because the source command does not use
configurations to determine the image to source, effectively no
verification takes place.

To address this, allow specifying configuration nodes. We use the same
syntax as the bootm command (helpfully provided for us by fit_parse_conf).
By default, we first try the default config and then the default image. To
force using a config, # must be present in the command (e.g. `source
$loadaddr#my-conf`). For convenience, the config may be omitted, just like
the address may be (e.g. `source \#`). This also works for images
(`source :` behaves exactly like `source` currently does).

[1] https://lore.kernel.org/u-boot/7d711133-d513-5bcb-52f2-a9dbaa9eeded@prevas.dk/
[2] https://lore.kernel.org/u-boot/042dcb34-f85f-351e-1b0e-513f89005fdd@gmail.com/

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-31 13:35:19 -05:00
Sean Anderson
30fb045f2d treewide: Use NULL for script image name
Two callers of image_source_script specify an image name. However, both
use the deprecated @ syntax, indicating that they have not been updated
in a while. If CONFIG_FIT_SIGNATURE is enabled, we will reject such
names outright. Back in commit 152576a598 ("stm32mp: stm32prog: handle
U-Boot script in flashlayout alternate"), we even renamed one of the
nodes. Instead of hard-coding a script image name, just use the default
image.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-31 13:35:19 -05:00
Jim Liu
dbedf4a56b power: regulator: Add support for NPCM8xx
Add support for setting nuvoton BMC NPCM845 voltage supply.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2022-12-26 15:44:00 +09:00
Tom Rini
648d675a2f cf_spi.c: Rename CONFIG_SPI_IDLE_VAL to SPI_IDLE_VAL
This value is never changed by boards, so just rename it to
SPI_IDLE_VAL to fit with the rest of the code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 13:01:13 -05:00
Tom Rini
50e88c0fea pci-rcar-gen3: Rename CONFIG_SEND_ENABLE
We rename the symbol CONFIG_SEND_ENABLE to just SEND_ENABLE, and remove
the second whitespace following the define.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 13:01:13 -05:00
Tom Rini
1e01950333 post: Move CONFIG_SYS_POST to CFG_SYS_POST
Migrate the rest of the CONFIG_SYS_POST macros over to CFG_SYS_POST
namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 13:01:13 -05:00
Tom Rini
0478dac62a kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.

The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00
Tom Rini
1d0eaf2f32 global: Migrate CONFIG_USB_ISP1301_I2C_ADDR to CFG
Perform a simple rename of CONFIG_USB_ISP1301_I2C_ADDR to CFG_USB_ISP1301_I2C_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
61693acbce global: Migrate CONFIG_USART_ID to CFG
Perform a simple rename of CONFIG_USART_ID to CFG_USART_ID

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
805482d187 global: Migrate CONFIG_USART_BASE to CFG
Perform a simple rename of CONFIG_USART_BASE to CFG_USART_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
e7cebff656 global: Migrate CONFIG_TSEC_TBICR_SETTINGS to CFG
Perform a simple rename of CONFIG_TSEC_TBICR_SETTINGS to CFG_TSEC_TBICR_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
d8964b3e1d global: Migrate CONFIG_SYS_I2C_DIRECT_BUS to CFG
Perform a simple rename of CONFIG_SYS_I2C_DIRECT_BUS to CFG_SYS_I2C_DIRECT_BUS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
97148cb614 global: Migrate CONFIG_SH_ETHER_USE_PORT to CFG
Perform a simple rename of CONFIG_SH_ETHER_USE_PORT to CFG_SH_ETHER_USE_PORT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
7c480bab14 global: Migrate CONFIG_SH_ETHER_PHY_ADDR to CFG
Perform a simple rename of CONFIG_SH_ETHER_PHY_ADDR to CFG_SH_ETHER_PHY_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
ff53ecc387 global: Migrate CONFIG_SH_ETHER_CACHE_WRITEBACK to CFG
Perform a simple rename of CONFIG_SH_ETHER_CACHE_WRITEBACK to CFG_SH_ETHER_CACHE_WRITEBACK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
c253cea724 global: Migrate CONFIG_SH_ETHER_CACHE_INVALIDATE to CFG
Perform a simple rename of CONFIG_SH_ETHER_CACHE_INVALIDATE to CFG_SH_ETHER_CACHE_INVALIDATE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
24513c3ac8 global: Migrate CONFIG_SH_ETHER_ALIGNE_SIZE to CFG
Perform a simple rename of CONFIG_SH_ETHER_ALIGNE_SIZE to CFG_SH_ETHER_ALIGNE_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:12 -05:00
Tom Rini
77d0870c29 global: Migrate CONFIG_SCSI_DEV_LIST to CFG
Perform a simple rename of CONFIG_SCSI_DEV_LIST to CFG_SCSI_DEV_LIST

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:11 -05:00
Tom Rini
dbfaeecf59 global: Migrate CONFIG_SCIF_A to CFG
Perform a simple rename of CONFIG_SCIF_A to CFG_SCIF_A

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:11 -05:00
Tom Rini
193b3fe175 global: Migrate CONFIG_POWER_PFUZE3000_I2C_ADDR to CFG
Perform a simple rename of CONFIG_POWER_PFUZE3000_I2C_ADDR to CFG_POWER_PFUZE3000_I2C_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:52 -05:00
Tom Rini
aa3efb6c64 global: Migrate CONFIG_POWER_PFUZE100_I2C_ADDR to CFG
Perform a simple rename of CONFIG_POWER_PFUZE100_I2C_ADDR to CFG_POWER_PFUZE100_I2C_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:52 -05:00
Tom Rini
6d38c69e83 global: Migrate CONFIG_POWER_LTC3676_I2C_ADDR to CFG
Perform a simple rename of CONFIG_POWER_LTC3676_I2C_ADDR to CFG_POWER_LTC3676_I2C_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:52 -05:00
Tom Rini
b861574bd9 global: Migrate CONFIG_PL01x_PORTS to CFG
Perform a simple rename of CONFIG_PL01x_PORTS to CFG_PL01x_PORTS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
f410d0ac8a global: Migrate CONFIG_PL011_CLOCK to CFG
Perform a simple rename of CONFIG_PL011_CLOCK to CFG_PL011_CLOCK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
e9212bffe3 global: Migrate CONFIG_PHY_ET1011C_TX_CLK_FIX to CFG
Perform a simple rename of CONFIG_PHY_ET1011C_TX_CLK_FIX to CFG_PHY_ET1011C_TX_CLK_FIX

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
52139620be global: Migrate CONFIG_PCIE_IMX_POWER_GPIO to CFG
Perform a simple rename of CONFIG_PCIE_IMX_POWER_GPIO to CFG_PCIE_IMX_POWER_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
7906f91789 global: Migrate CONFIG_PCIE_IMX_PERST_GPIO to CFG
Perform a simple rename of CONFIG_PCIE_IMX_PERST_GPIO to CFG_PCIE_IMX_PERST_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
dd11fdc31f global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG
Perform simple renames of:
   CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS
   CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT
   CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
4db386655a global: Migrate CONFIG_MXC_UART_BASE to CFG
Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
d1c723895b global: Migrate CONFIG_MXC_NAND_REGS_BASE to CFG
Perform a simple rename of CONFIG_MXC_NAND_REGS_BASE to CFG_MXC_NAND_REGS_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
55eef1d629 global: Migrate CONFIG_MXC_NAND_IP_REGS_BASE to CFG
Perform a simple rename of CONFIG_MXC_NAND_IP_REGS_BASE to CFG_MXC_NAND_IP_REGS_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
1d457dbb91 global: Migrate CONFIG_MAX_MEM_MAPPED to CFG
Perform a simple rename of CONFIG_MAX_MEM_MAPPED to CFG_MAX_MEM_MAPPED

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
bd79d3d616 global: Migrate CONFIG_LPC32XX_NAND_SLC_WWIDTH to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_WWIDTH to CFG_LPC32XX_NAND_SLC_WWIDTH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
308ed80839 global: Migrate CONFIG_LPC32XX_NAND_SLC_WSETUP to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_WSETUP to CFG_LPC32XX_NAND_SLC_WSETUP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
b0c548273e global: Migrate CONFIG_LPC32XX_NAND_SLC_WHOLD to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_WHOLD to CFG_LPC32XX_NAND_SLC_WHOLD

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
fa32dc7d15 global: Migrate CONFIG_LPC32XX_NAND_SLC_WDR_CLKS to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_WDR_CLKS to CFG_LPC32XX_NAND_SLC_WDR_CLKS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:51 -05:00
Tom Rini
fa0e72a34e global: Migrate CONFIG_LPC32XX_NAND_SLC_RWIDTH to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_RWIDTH to CFG_LPC32XX_NAND_SLC_RWIDTH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
416ef8c7c6 global: Migrate CONFIG_LPC32XX_NAND_SLC_RSETUP to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_RSETUP to CFG_LPC32XX_NAND_SLC_RSETUP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
bba52ab080 global: Migrate CONFIG_LPC32XX_NAND_SLC_RHOLD to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_RHOLD to CFG_LPC32XX_NAND_SLC_RHOLD

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
c102eb5ca7 global: Migrate CONFIG_LPC32XX_NAND_SLC_RDR_CLKS to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_SLC_RDR_CLKS to CFG_LPC32XX_NAND_SLC_RDR_CLKS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
39fa17718f global: Migrate CONFIG_LPC32XX_NAND_MLC_WR_LOW to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_WR_LOW to CFG_LPC32XX_NAND_MLC_WR_LOW

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
196690dfda global: Migrate CONFIG_LPC32XX_NAND_MLC_WR_HIGH to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_WR_HIGH to CFG_LPC32XX_NAND_MLC_WR_HIGH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
259ec2ce11 global: Migrate CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY to CFG_LPC32XX_NAND_MLC_TCEA_DELAY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
3c35c036ad global: Migrate CONFIG_LPC32XX_NAND_MLC_RD_LOW to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_RD_LOW to CFG_LPC32XX_NAND_MLC_RD_LOW

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
ab8c6e370c global: Migrate CONFIG_LPC32XX_NAND_MLC_RD_HIGH to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_RD_HIGH to CFG_LPC32XX_NAND_MLC_RD_HIGH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
ea93286e5f global: Migrate CONFIG_LPC32XX_NAND_MLC_NAND_TA to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_NAND_TA to CFG_LPC32XX_NAND_MLC_NAND_TA

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
dff9de5c2c global: Migrate CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY to CFG
Perform a simple rename of CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY to CFG_LPC32XX_NAND_MLC_BUSY_DELAY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
e9f508cf01 global: Migrate CONFIG_KSNET_SERDES_SGMII_BASE to CFG
Perform a simple rename of CONFIG_KSNET_SERDES_SGMII_BASE to CFG_KSNET_SERDES_SGMII_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
81d239aede global: Migrate CONFIG_KSNET_SERDES_SGMII2_BASE to CFG
Perform a simple rename of CONFIG_KSNET_SERDES_SGMII2_BASE to CFG_KSNET_SERDES_SGMII2_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
d036606142 global: Migrate CONFIG_KSNET_SERDES_LANES_PER_SGMII to CFG
Perform a simple rename of CONFIG_KSNET_SERDES_LANES_PER_SGMII to CFG_KSNET_SERDES_LANES_PER_SGMII

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:14:50 -05:00
Tom Rini
e6014294dd global: Migrate CONFIG_IMX6_PWM_PER_CLK to CFG
Perform a simple rename of CONFIG_IMX6_PWM_PER_CLK to CFG_IMX6_PWM_PER_CLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
35661f86eb global: Migrate CONFIG_I2C_MVTWSI_BASE1 to CFG
Perform a simple rename of CONFIG_I2C_MVTWSI_BASE1 to CFG_I2C_MVTWSI_BASE1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
45ede979e8 global: Migrate CONFIG_I2C_MVTWSI_BASE0 to CFG
Perform a simple rename of CONFIG_I2C_MVTWSI_BASE0 to CFG_I2C_MVTWSI_BASE0

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:10:40 -05:00
Tom Rini
d2cd9f4121 global: Migrate CONFIG_FTRTC010_PCLK to CFG
Perform a simple rename of CONFIG_FTRTC010_PCLK to CFG_FTRTC010_PCLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
bf09562222 global: Migrate CONFIG_FTRTC010_EXTCLK to CFG
Perform a simple rename of CONFIG_FTRTC010_EXTCLK to CFG_FTRTC010_EXTCLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
193d7ab1e3 global: Migrate CONFIG_FSL_PMIC_MODE to CFG
Perform a simple rename of CONFIG_FSL_PMIC_MODE to CFG_FSL_PMIC_MODE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
f200d710d8 global: Migrate CONFIG_FSL_PMIC_CS to CFG
Perform a simple rename of CONFIG_FSL_PMIC_CS to CFG_FSL_PMIC_CS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
3a8be4da79 global: Migrate CONFIG_FSL_PMIC_CLK to CFG
Perform a simple rename of CONFIG_FSL_PMIC_CLK to CFG_FSL_PMIC_CLK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
e3e4efc04f global: Migrate CONFIG_FSL_PMIC_BITLEN to CFG
Perform a simple rename of CONFIG_FSL_PMIC_BITLEN to CFG_FSL_PMIC_BITLEN

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:43 -05:00
Tom Rini
72fc264504 global: Migrate CONFIG_FPGA_DELAY to CFG
Perform a simple rename of CONFIG_FPGA_DELAY to CFG_FPGA_DELAY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
fa760c3240 global: Migrate CONFIG_FEC_MXC_PHYADDR to CFG
Perform a simple rename of CONFIG_FEC_MXC_PHYADDR to CFG_FEC_MXC_PHYADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
2aac334a9b global: Migrate CONFIG_FB_ADDR to CFG
Perform a simple rename of CONFIG_FB_ADDR to CFG_FB_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
42119de8b5 global: Migrate CONFIG_DW_WDT_CLOCK_KHZ to CFG
Perform a simple rename of CONFIG_DW_WDT_CLOCK_KHZ to CFG_DW_WDT_CLOCK_KHZ

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
218ce3695b global: Remove undef CONFIG_... for unused values
We have a number of places that undef CONFIG_... while we never
reference CONFIG_... in the first place. Remove these lines.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
d5c4b8b063 log: Remove some places where we redefine LOGLEVEL
We cannot redefine a CONFIG value per file in this manner.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
991bc16951 atmel_nand: Remove undef during SPL_BUILD
We cannot disable features in SPL in this manner, remove the undef here.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
2c065aeeee mtd: ubi: Finish moving configuration to Kconfig
We have some unused and undefined symbols to remove references to, so do
that. Move the final things that we do set (or need to keep unset) to
Kconfig instead.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
f00f676af6 Convert CONFIG_SYS_FPGA_CHECK_BUSY to Kconfig
This converts the following to Kconfig:
    CONFIG_SYS_FPGA_CHECK_BUSY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
e1befc8512 OP-TEE autodiscovery
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEgWII69YpahbL5iK5gS8AYozs+qIFAmOlZoUACgkQgS8AYozs
 +qIqDA//QLRmx5+Rq8+MkXar6Xpt6nP877+onIxJLeZ4RaNY1I9EIv2hjHcR5NpB
 Wj4K4wP7EQobHTfMDD2owEJ5jOPjmMgYrd8j+7g8q+G7160JTYV6FDxYa3V6b55/
 qifW8T6eTyeaNwKEZyLb7+aNHJ/ULx51RQ8AlTM+ttv2iiYeB7+DegqdF3Df6hjT
 8uFHOPX0+ln+8UUKHCm0NKxUsply4qGlJiuK99Pq1xnGTxyZ1G1+qqXvuFazGOZm
 wHm1Ha08hep6Ye2azjBof8FdA7cjM//7SSUgOctEf1agloxblmt26XfDsxn0U3Oa
 5AbGLrPnL5KJjv/ij5TeaAGdOYPhsgsKJj3vwbbdoARLOb3x91rt7e/ZtThrKcF5
 Ygj0+vpnRzLzgfqqSg90OfWW4NBFNPyXl6qG1ykQrKtnVMDrBofFIcqemwpn9moe
 4Ybx/28Vj1vXLpdt9JDR2vVrmJuPookrUBkTcMMRrrB2zBDF6hGx5wmit8pYZV+R
 CfhyzEzq4WrHXijxmNN56GtnpYVp8GQGaDJy1Fo4BZ8f5h85zvUyfplYyeVsejru
 T3HvvEjRgBjZvEzDh3zj6MI37SYQX4vT5FESBhv+Yab7tl2kp1DLKlVtM9UyvJpt
 RuDt6FOMkFXwLO1JjmAfgn2u4L7TdEdThCceY+G8ElAP4OgpWiA=
 =1O+t
 -----END PGP SIGNATURE-----

Merge tag 'tpm-23122022' of https://source.denx.de/u-boot/custodians/u-boot-tpm

OP-TEE autodiscovery
2022-12-23 07:46:41 -05:00
Etienne Carriere
fe8a4ed011 tee: optee: discover services dependent on tee-supplicant
Makes OP-TEE to enumerate also services depending on tee-supplicant
support in U-Boot. This change allows OP-TEE services like fTPM TA
to be discovered and get a TPM device registered in U-Boot.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-23 10:26:15 +02:00
Etienne Carriere
476a3d58df tee: optee: don't fail probe because of optee-rng
Fixes optee-rng driver bind sequence in optee driver to print a warning
message but not report an error status when a optee-rng service driver
fails to be bound as the optee driver itself is still fully functional.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-23 10:26:11 +02:00
Jim Liu
dd5f07eb6b net: nuvoton: fix build broken for use phy_get_interface_by_name
The original patch is use phy_get_interface_by_name to set interface.
The new patch is use dev_read_phy_mode to replace it.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-12-22 15:39:13 -05:00
Tom Rini
46df77669e nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZE
This is always defined to 16K, so we move this over to
include/fsl_validate.h to start with. Next, we rename this from CONFIG_
to FSL_. Coalesce the various comments around this definition to be in
fsl_validate.h as well to explain the usage.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00
Tom Rini
0c3a6d443f usb: Remove CONFIG_USBD_HS
This define is not enabled by the only platform which currently enables
the legacy option of CONFIG_USB_DEVICE. We can drop this code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00
Tom Rini
8747decc9b net: vsc9953: Remove this driver
No platforms enable this driver as there's no T1040D4RDB nor T1040RDB
support at this time.  Remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00
Tom Rini
4fd9373bbb net: Remove more legacy functions
Remove some of the board and arch specific non-DM_ETH helper code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:49 -05:00
Tom Rini
c46597155e sandbox: Finish migration to Kconfig
Stop using CONFIG_SANDBOX_ARCH and use CONFIG_SANDBOX instead. For the
SPI related defines, set them directly in Kconfig. This now empties
arch/sandbox/include/asm/config.h.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-22 10:31:48 -05:00
Tom Rini
f55281665a arm: ti814x: Remove remaining support code
When the ti814x_evm config was removed most, but not all, of the
relevant support code was remove.  Get rid of what was missed.

Fixes: 50b5326868 ("ti814x: Remove platform")
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
71894173bb Convert CONFIG_MXC_NAND_HWECC to Kconfig
This converts the following to Kconfig:
   CONFIG_MXC_NAND_HWECC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
829e9d2236 ddr: fsl: Remove CONFIG_MEM_INIT_VALUE
The way all of the memory init code here works is that we pass
0xDEADBEEF around for the initial value (as it's a well known 'poison'
value and so easily recognized in debuggers, etc). The only point of
this CONFIG symbol was to pass in a different value for that purpose.
Drop this symbol and cleanup the code slightly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
2cc61a631b malta: Rename CONFIG_MALTA to CONFIG_TARGET_MALTA
Fixup this last remnant of CONFIG_MALTA.

Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
acdf89ec06 Convert CONFIG_KSNET_NETCP_V1_0 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_KSNET_NETCP_V1_0
   CONFIG_KSNET_NETCP_V1_5

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
308520b8f2 global: Remove unused CONFIG symbols
This removes the following unreferenced CONFIG symbols:
   CONFIG_FDTADDR
   CONFIG_FDTFILE
   CONFIG_FLASH_SECTOR_SIZE
   CONFIG_FSL_CPLD
   CONFIG_HDMI_ENCODER_I2C_ADDR
   CONFIG_I2C_MVTWSI
   CONFIG_I2C_RTC_ADDR
   CONFIG_IRAM_END
   CONFIG_IRAM_SIZE
   CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
   CONFIG_L1_INIT_RAM
   CONFIG_MACB_SEARCH_PHY
   CONFIG_MIU_2BIT_21_7_INTERLEAVED
   CONFIG_MTD_NAND_VERIFY_WRITE
   CONFIG_MVGBE_PORTS
   CONFIG_NETDEV
   CONFIG_NUM_DSP_CPUS
   CONFIG_PHY_BASE_ADR
   CONFIG_PHY_INTERFACE_MODE
   CONFIG_PSRAM_SCFG
   CONFIG_RAMBOOT_SPIFLASH
   CONFIG_RAMBOOT_TEXT_BASE
   CONFIG_RD_LVL
   CONFIG_ROCKCHIP_SDHCI_MAX_FREQ
   CONFIG_SETUP_INITRD_TAG
   CONFIG_SH_QSPI_BASE
   CONFIG_SMDK5420
   CONFIG_SOCRATES
   CONFIG_SPI_ADDR
   CONFIG_SPI_FLASH_QUAD
   CONFIG_SPI_FLASH_SIZE
   CONFIG_SPI_HALF_DUPLEX
   CONFIG_SPI_N25Q256A_RESET
   CONFIG_TEGRA_SLINK_CTRLS
   CONFIG_TPM_TIS_BASE_ADDRESS
   CONFIG_UBOOT_SECTOR_COUNT
   CONFIG_UBOOT_SECTOR_START
   CONFIG_VAR_SIZE_SPL
   CONFIG_VERY_BIG_RAM

And also:
   BL1_SIZE
   PHY_NO
   RESERVE_BLOCK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
1353b25ec5 i2c: Remove CONFIG_I2C_MULTI_BUS
This functionality is part of the legacy I2C subsystem and is currently
unused anywhere.  Remove the remaining references.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
3f7a496531 Convert CONFIG_POWER_PCA9450 to Kconfig
This converts the following to Kconfig:
   CONFIG_POWER_PCA9450

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
5388aa2851 Convert CONFIG_FSL_ESDHC_PIN_MUX to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_ESDHC_PIN_MUX

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
3a581af21a Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig
This converts the following to Kconfig:

   CONFIG_FLASH_SPANSION_S29WS_N
   CONFIG_FLASH_VERIFY
   CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
   CONFIG_FSL_ISBC_KEY_EXT
   CONFIG_FSL_TRUST_ARCH_v1
   CONFIG_FSL_SDHC_V2_3
   CONFIG_MAX_DSP_CPUS
   CONFIG_MIU_2BIT_INTERLEAVED
   CONFIG_SERIAL_BOOT
   CONFIG_SPI_BOOTING
   CONFIG_X86EMU_RAW_IO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
98fbad631f Convert CONFIG_FLASH_SHOW_PROGRESS to Kconfig
This converts the following to Kconfig:
   CONFIG_FLASH_SHOW_PROGRESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
21491883d2 fec_mxc: Remove CONFIG_FEC_FIXED_SPEED support
This option is only used on one platform currently. However, with PHYLIB
enabled, which this platform also does, this option is not checked and
the functional use case is handled. Remove this code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
9b0240f8c6 Convert CONFIG_DM9000_BYTE_SWAPPED et al to Kconfig
This converts the following to Kconfig:
   CONFIG_DM9000_BYTE_SWAPPED
   CONFIG_DM9000_NO_SROM
   CONFIG_DM9000_USE_16BIT
   CONFIG_DM9000_DEBUG
   CONFIG_MXC_GPT_HCLK
   CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
2440b5bb52 Convert CONFIG_HSMMC2_8BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_HSMMC2_8BIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
7d212af2b1 usb: Update USB_STORAGE dependencies
As it's no longer possible to have !DM_USB set, we can remove these
dependencies.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-21 19:04:33 -05:00
Tom Rini
14f43797d0 Prepare v2023.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmOgaw0ACgkQFHw5/5Y0
 tyxIeQv8DfAAB8hN+wWeDhQAJBXBLvV+RrocGJ2lpuWN0DUgT955l0zSjP4eD5I/
 sSsT8iJ15obkbWHq61V9W81Velw5qR+gHW9IAzFKiQBfvdcdfgWFeme9fWp/gqxn
 vvPc2sULA9utkc+kQ+qJy2hmTM7I0ZbKzUwTXSv+Tp9on3vlc0quKSHiZ1EvHNww
 8tW13d1r+Be+CC+GVPrhJojfKBcYVJhW21rJMgb4JdfGNWKmpUpF6fUzHe0wiy2P
 HSnScr44E099t9RDZabw0V1fEgQqxIAmL1qQamXf9ddLZQM9Sq63lygTtGsqg61+
 qeHCZVjPg9cXayGfRVesH8sko3vW+IPuo0Q6Ox0vAyRSyzTpOcTuzn3RcMrq+mfu
 ZRF32aFJKVvAI3xesOj1aCBBYjl4POiHA8i3yeP9KcjqW3So0aphDtxp1idgwOZl
 kIxuC4ItWyF7xoyng/7RWwr2VjcKSyw58stRjfV+WNcByV4+ud1A59vsgZOqO49m
 0bLx5dGu
 =EX/F
 -----END PGP SIGNATURE-----

Merge tag 'v2023.01-rc4' into next

Prepare v2023.01-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21 13:09:01 -05:00
Eugen Hristev
9859b9a722 sysreset: at91: add compatible with microchip, sama7g5-rstc
As documented in bindings doc in kernel 6.0:
https://elixir.bootlin.com/linux/v6.0/source/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-12-20 11:59:07 +02:00
Etienne Carriere
33ba80303e tpm2: ftpm: open session with privileged ree login
Opens the fTPM session with TEE_LOGIN_REE_KERNEL as fTPM may restrict
access to that login when Linux based OS is running as applications are
expected to got through the Linux TPMv2 driver.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 09:37:36 +02:00
Tom Rini
daa531cc5c Merge tag 'u-boot-rockchip-20221219' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Only call binman when TPL available;
- rk3128 DTS fix;
- Fix GPT table corruption for rk3399 puma ;
- Fix i2c for rk3399 Pinebookpro;
- Enable UEFI capsule update for RockPi4;
2022-12-19 08:33:24 -05:00
John Keeping
b5194c2258 phy: rockchip: handle clock without enable function
If a clock doesn't supply the enable hook, clk_enable() will return
-ENOSYS.  In this case the clock is always enabled so there is no error
and the phy initialisation should continue.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Johan Jonker
4d89330b8a rockchip: rk3128-cru: sync the clock dt-binding header from Linux
In order to update the DT for rk3128
sync the clock dt-binding header.
This is the state as of v6.0 in Linux.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Tom Rini
55e374f508 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
This cleans up each board's defconfig, and fixes the serial console on
some Olimex board. Also we lose another legacy config variable.
The rest are minor cleanups, that actually shouldn't change anything
in the build.

Passed the gitlab CI, plus briefly tested on Pine64-LTS, LicheePi Nano,
and BananaPi M1.
2022-12-18 08:08:55 -05:00
Samuel Holland
6cad8bea4f pinctrl: sunxi: Add P2WI and RSB pinmuxes
P2WI and RSB are used to communicate with a PMIC. Most SoCs have only
one possible pinmux. F1C100s has two possibilities, with different mux
values, so omit it until some board needs one of them.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-13 20:33:37 +00:00
Tom Rini
ed6251187a Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot"
With the change here, all extlinux.conf files with only "KERNEL
/fitImage" don't work anymore. One common example of this would be those
files generated by thee Poky/OE WIC bootimg-partition bootloader
partition generator.

This reverts commit d5ba6188df.

Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Reported-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-13 09:26:25 -05:00
Patrick Delaunay
8b83d54f9e configs: remove support of MTDIDS_DEFAULT/MTDPARTS_DEFAULT
Complete the migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT in Kconfig;
this patch removes the support of MTDIDS_DEFAULT / MTDPARTS_DEFAULT
in the configuration files (include/configs/*.h).

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-12 16:46:07 -05:00
Ben Dooks
4c56d75117 drivers: pci: pcie_dw_common: add upper-limit to iATU
The 4.6 spec added an upper 32bits to the ATU limit, and since this
driver is already assuming the unrolled feature added in the 4.8
specification this really should be set.

This is causing a bug with testing against the QEMU model as it
defaults the viewports to fully open and not setting this causes
the config viewport to become most of memory (obviously stopping
the emulated system working correctly)

Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
2022-12-12 14:03:11 -05:00
Patrick Delaunay
30257f4699 dm: pmic: ignore disabled node in pmic_bind_children
Ignore the disabled children node in pmic_bind_children() so the
disabled regulators in device tree are not registered.

This patch is based on the dm_scan_fdt_node() code - only the
activated nodes are bound -  and it solves possible issue when a
deactivated regulator is bound, error for duplicated regulator name
for example.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-12 11:25:28 +01:00
Patrick Delaunay
91dae6d0a1 phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supply
Use regulator_set_enable_if_allowed() api instead of regulator_set_enable()
while disabling vbus supply. This way the driver doesn't see an error
when it disable an always-on regulator for VBUS.

This patch is needed for STM32MP157C-DK2 board when the regulator
v3v3: buck4 used as the phy vbus supply in kernel device tree
is always on with the next hack for low power use-case:

&usbphyc_port0 {
        ...
	/*
	 * Hack to keep hub active until all connected devices are suspended
	 * otherwise the hub will be powered off as soon as the v3v3 is disabled
	 * and it can disturb connected devices.
	 */
	connector {
		compatible = "usb-a-connector";
		vbus-supply = <&v3v3>;
	};
};

Without this patch and the previous update in DT the command
"usb stop" failed and the next command "usb start" cause a crash.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2022-12-12 11:25:19 +01:00
Dario Binacchi
17c2ccde22 mtd: nand: mxs_nand_spl: don't read useless pages
The patch prevents pages beyond the last from being unnecessarily read.
This occurs when the last page to be read is not the last page of the
last block. Before this change we would have read all the pages up to
the end of the last block.

Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221120095705.3019295-1-dario.binacchi@amarulasolutions.com
2022-12-10 14:35:55 +01:00
Dario Binacchi
670789f5ba mtd: nand: drop EXPORT_SYMBOL_GPL for nanddev_erase()
This function is only used within this module, so it is no longer
necessary to use EXPORT_SYMBOL_GPL().

This patch parallels the work done in the following patch:
https://lore.kernel.org/linux-mtd/20221018170205.1733958-1-dario.binacchi@amarulasolutions.com

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221108090719.3631621-1-dario.binacchi@amarulasolutions.com
2022-12-10 14:35:55 +01:00
Michael Trimarchi
c21b0ca525 mtd: nand: make Samsung SLC NAND usable again
Upstream linux commit 69fc01296c9281

commit a1286a1fc4 ("mtd: nand: Move Samsung specific init/detection
logic in nand_samsung.c") introduced a regression for Samsung SLC NAND
chips. Prior to this commit chip->bits_per_cell was initialized by calling
nand_get_bits_per_cell() before using nand_is_slc().
With the offending commit this call is skipped, leaving
chip->bits_per_cell cleared to zero when the manufacturer specific
'.detect' function calls nand_is_slc() which in turn interprets
bits_per_cell != 1 as indication for an MLC chip.
The effect is that e.g. a K9F1G08U0F NAND chip is falsely detected as
MLC NAND with 4KiB page size rather than SLC with 2KiB page size.

Add a call to nand_get_bits_per_cell() before calling the .detect hook
function in nand_manufacturer_detect(), so that the nand_is_slc()
calls in the manufacturer specific code will return correct results.

Reported-by: Marcin Gołaś <marcingol30@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221021060536.11747-1-michael@amarulasolutions.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10 14:35:55 +01:00
Roger Quadros
ec2c9240d5 mtd: rawnand: omap_gpmc: Reduce .bss usage
Allocate omap_ecclayout on the heap as we have
limited .bss space on AM64 R5 SPL configuration.

Reduces .bss usage by 2984 bytes.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221011115012.6181-9-rogerq@kernel.org
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10 14:35:54 +01:00
Roger Quadros
664d536926 mtd: rawnand: nand_spl_loaders: Fix cast type build warning
Fixes the below build warning on 64-bit platforms.

drivers/mtd/nand/raw/nand_spl_loaders.c:26:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
      dst = (void *)((int)dst - page_offset);

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221011115012.6181-8-rogerq@kernel.org
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10 14:35:54 +01:00
Roger Quadros
cd72a950e0 mtd: rawnand: omap_gpmc: Optimize NAND reads
Rename omap_nand_read() to omap_nand_read_buf() to reflect
actual behaviour.

Use FIFO read address instead of raw read address for reads.

The GPMC automatically converts 32-bit/16-bit reads to NAND
device specific reads (8/16 bit). Use the largest possible
read granularity size for more efficient reads.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221011115012.6181-5-rogerq@kernel.org
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10 11:11:25 +01:00
Roger Quadros
7e4a494c5f mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platforms
Pointer size cannot be assumed to be 32-bit, so use
use uintptr_t instead of uint32_t.

Fixes the below build warning on 64-bit builds.

drivers/mtd/nand/raw/omap_gpmc.c:439:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  head = ((uint32_t) buf) % 4;

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221011115012.6181-4-rogerq@kernel.org
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10 11:11:25 +01:00
Roger Quadros
472229fcfc mtd: rawnand: omap_gpmc: Enable build for K2/K3 platforms
The GPMC module is present on some K2 and K3 SoCs.
Enable building GPMC NAND driver for K2/K3 platforms.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221011115012.6181-3-rogerq@kernel.org
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10 11:11:25 +01:00
Roger Quadros
c6bafdae50 mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.h
We want to get rid of <asm/arch/mem.h> so don't
enforce it for new platforms.

This also means GPMC_MAX CS doesn't have to be defined
by platform code.

Define it locally here for now.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221011115012.6181-2-rogerq@kernel.org
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10 11:11:25 +01:00
Bryan Brattlof
d90c8bc441 board: ti: introduce the basic files needed to support the am62a
Introduce the bare minimum SD and UART support for the am62a sk.

Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-12-09 14:10:28 -05:00
Bryan Brattlof
b6cbcd6155 arm: mach-k3: am62a: introduce auto-generated SoC data
Introduce the auto-generated clock tree and power domain data needed to
attach the am62a into the power-domain and clock frameworks of uboot

Signed-off-by: Bryan Brattlof <bb@ti.com>
2022-12-09 14:10:28 -05:00
Bryan Brattlof
e38025c8b5 soc: ti: k3-socinfo: add am62a SoC entry
Add identification support for TI's am62ax family of SoCs

Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-12-09 14:10:28 -05:00
Bryan Brattlof
f54febe1b1 ram: k3-ddrss: add am62a controller support
TI's am62a family of SoCs uses a new 32bit DDR controller that shares
much of the same functionality with the existing am64 and j721e
controllers.

Select this controller by default when u-boot is build for the am62a

Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-12-09 14:10:28 -05:00
Bryan Brattlof
ee31be429b ram: k3-ddrss: add auto-generated macros for am62a support
The new 32bit DDR controller for TI's am62a family of SoCs shares much
of the same functionality with the existing 16bit (am64) and 32bit
(j721e) controllers, so this patch reorganizes the existing
auto-generated macros for the 16bit and 32bit controllers to make room
for the macros for the am62a's controller

This patch consists mostly of header/macro renames and additions with a
new Kconfig option (K3_AM62A_DDRSS) allowing us to select these new
macros during compilation.

Signed-off-by: Bryan Brattlof <bb@ti.com>
2022-12-09 14:10:28 -05:00
Tom Rini
8f17040877 - Drop MMCI interrupt-names in STM32H743, STM32MP15 and STM322MP13 DT
DHSOM:
   - Enable assorted ST specific commands
   - Add version variable
   - Add boot counter
 STM32MP13:
   - Add sdmmc cd-gpios for STM32MP135F-DK
   - Add clock & reset support
 STM32 ADC:
   - Split channel init into several routines
   - Add support of generic channels binding
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmOQvIUcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pgRHD/42Dhlm8qyeBM+mFp/C
 vtGLkXHof7Iec48uGfMh2qhb4tMWpH9jQSF/iK8GERlaBJesNTuDLG2y9e411f5x
 OfnXeoT1vxlxARo/3D9ESvR8q1/6wRWYWYQ7W08yVmMakLjF2ojky1h0mgvJj1x0
 yzFdZVfrlx3XtP0opC8h2NtfVAa2fq8L6fx6r7nFKhPd6PSlDBeyiW/5fC/EyTLW
 Sqn7/POrOCgpWSuStcosWNkHNldupi7Dv0zGh0XWEfAv/XBqR0LD6KAEwUygsY4i
 zGKtfZeOrwAhKMeA2MhMyM8oW7gNPw8Xia74a5vqVv1qFrd6arCUfvhTn/4T6Kyt
 dtc93i7XR0bYumYaEb5DLeqge6QEIIjVb36g0c/njWI8AerOsnRKhUpuhF6Y58LU
 RM4y8MYWY0bsTsSCCHhKIm/DPR/iA4m076Obdy+iRRNG4c4fg8/EfcUsXaoHvmap
 Bi1edpFmMh92Uv3sdgkMHS1j9Vo8gvnCRujEUiPvSFHmrMWo1OW8xVoIPgNCdMYF
 IkmTbAelRK8MSgFy2DLBbMeOTMZN1VFTdzVxBRLP4DXNZQWx2gcHrVLAjzYnMpsG
 YvSHz+pJJ8q8Bt8fTl0DCF8R+99DTB8j0o8MDQxo4a02njoNtcvDbeCkdT2ddzPX
 s4WhBkfgBWNv1tYBVNscEr0aTw==
 =DkkE
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20221207' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Drop MMCI interrupt-names in STM32H743, STM32MP15 and STM322MP13 DT

DHSOM:
  - Enable assorted ST specific commands
  - Add version variable
  - Add boot counter
STM32MP13:
  - Add sdmmc cd-gpios for STM32MP135F-DK
  - Add clock & reset support
STM32 ADC:
  - Split channel init into several routines
  - Add support of generic channels binding
2022-12-08 11:25:08 -05:00
Balamanikandan Gunasundar
2dc1b8fe17 mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
Add helper functions for atmel Static Memory Controller. The functions
are required to configure SMC. This file is inherited from the work
done by Boris Brezillon for Linux

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
68ddf18dc3 memory: atmel-ebi: add Atmel EBI (External Bus Interface) driver
The EBI is used to access peripherals like NAND, SRAM, NOR etc. Add
this driver to probe the nand flash controller. This is a dummy driver
and not yet a complete device driver for EBI.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
a490e1b7c0 nand: atmel: Add pmecc driver
Add driver for atmel pmecc. This implementation is ported from
Linux. The reference taken is linux-5.4-at91.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
6a8dfd5722 nand: atmel: Add DM based NAND driver
This implementation is ported from the rework done by Boris Brezillon
in Linux. This porting is done based on linux-5.4-at91. The driver is
tested in sam9x60ek, sama5d3_xplained, sam9x75eb and sama7g54-ddr3-eb.

Changes done includes

- Adapt GPIO descriptor apis for U-Boot. Use gpio_request_by_name_nodev,
  dm_gpio_get_value etc.
- Use U_BOOT_DRIVER instead of platform_driver.
- Replace struct platform_device with struct udevice
- Check the status of nfc exec operation by polling the status
  register instead of interrupt based handling
- DMA operations not supported. Remove it
- Adapt DT parsing to U-Boot APIs

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:18 +02:00
Pali Rohár
bd0ed9a2d2 ata: ahci-pci: Replace magic constant by macro
Replace 0x1b21 by macro PCI_VENDOR_ID_ASMEDIA with the same value.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-08 10:46:01 -05:00
Patrick Delaunay
55b0affd26 firmware: scmi: use protocol node name to bind the scmi regulator driver
In scmi firmware driver, it is better to bind the scmi protocol driver
"scmi_voltage_domain" with the node name of the protocol 17 and not
the sub-node named "regulator", because is a fixed string which doesn't
provide information and because it is not aligned with the other scmi
protocol nodes.

For example on stm32mp135f-dk board with device tree in stm32mp131.dtsi

scmi: scmi {
	compatible = "linaro,scmi-optee";
	#address-cells = <1>;
	#size-cells = <0>;
	linaro,optee-channel-id = <0>;
	shmem = <&scmi_shm>;
	scmi_clk: protocol@14 {
		reg = <0x14>;
		#clock-cells = <1>;
	};
	scmi_reset: protocol@16 {
		reg = <0x16>;
		#reset-cells = <1>;
	};
	scmi_voltd: protocol@17 {
		reg = <0x17>;
		scmi_regu: regulators {
			#address-cells = <1>;
			#size-cells = <0>;
			scmi_reg11: voltd-reg11 {
				reg = <VOLTD_SCMI_REG11>;
				regulator-name = "reg11";
			};
			scmi_reg18: voltd-reg18 {
				reg = <VOLTD_SCMI_REG18>;
				regulator-name = "reg18";
			};
			scmi_usb33: voltd-usb33 {
				reg = <VOLTD_SCMI_USB33>;
				regulator-name = "usb33";
			};
		};
	};
};

Before the patch:

> dm tree

 scmi_agent    0  [ + ]   scmi-over-optee       |-- scmi
 clk           1  [ + ]   scmi_clk              |   |-- protocol@14
 ...
 reset         1  [   ]   scmi_reset_domain     |   |-- protocol@16
 nop           2  [ + ]   scmi_voltage_domain   |   `-- regulators
 regulator     0  [ + ]   scmi_regulator        |       |-- voltd-reg11
 regulator     1  [ + ]   scmi_regulator        |       |-- voltd-reg18
 regulator     2  [ + ]   scmi_regulator        |       |-- voltd-usb33
 ...

after the patch:

> dm tree

 scmi_agent    0  [ + ]   scmi-over-optee       |-- scmi
 clk           1  [ + ]   scmi_clk              |   |-- protocol@14
 ...
 reset         1  [   ]   scmi_reset_domain     |   |-- protocol@16
 nop           2  [ + ]   scmi_voltage_domain   |   `-- protocol@17
 regulator     0  [ + ]   scmi_regulator        |       |-- voltd-reg11
 regulator     1  [ + ]   scmi_regulator        |       |-- voltd-reg18
 regulator     2  [ + ]   scmi_regulator        |       |-- voltd-usb33
 ...

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-08 09:29:02 -05:00
Szymon Heidrich
51a0e215ec usb: gadget: rndis: Prevent InformationBufferOffset manipulation
Prevent access to arbitrary memory locations in gen_ndis_set_resp
via manipulation of buf->InformationBufferOffset. Original
implementation permits manipulation of InformationBufferOffset to
exploit OID_GEN_CURRENT_PACKET_FILTER to set arbitrary memory contents
within a 32byte offset as the devices packet filter. The packet filter
value may be next retrieved using gen_ndis_query_resp so it is possible
to extract specific memory regions two bytes a time.

The rndis_query_response was not modified as neither the buffer offset
nor length passed to gen_ndis_query_resp is used.

Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
2022-12-08 14:30:39 +01:00
Hugo SIMELIERE
14dc0ab138 usb: gadget: dfu: Fix check of transfer direction
Commit fbce985e28 to fix CVE-2022-2347
blocks DFU usb requests.
The verification of the transfer direction was done by an equality
but it is a bit mask.

Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Sultan Qasim Khan <sultan.qasimkhan@nccgroup.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
2022-12-08 14:30:39 +01:00
Tom Rini
e524f3a449 net: Remove eth_legacy.c
As there are no more non-DM_ETH cases for networking, remove this legacy
file and update the Makefile to match current usage.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
9e0bcf8043 qe: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
2098a3b8fe usb: gadget: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
b8daa6e9ee usb: eth: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code fro usb_ether itself.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
0a9cbd4f3c usb: eth: smsc95xx: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
82cdcd5792 usb: eth: r8152: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
05d654b564 usb: eth: msc7830: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
d9e81b0dd7 usb: eth: asix88179: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
3aa2003b51 usb: eth: asix: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
8a9e3464e4 net: keystone_net: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
f8dc288c7f net: cpsw: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
8f5c7cc96b net: sunxi_emac: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
61af2af3f7 net: smc911x: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
85fdaea66c net: sh_eth: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
f1ee1e1ef1 net: rtl8169: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
f6fa0715ce net: rtl8139: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
36af92ba85 net: phy: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
32dc677276 net: pcnet: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
fa9ea7607f net: netconsole: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
c7f15a3ee8 net: mvgbe: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
c00e9467bc net: mcfmii: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
047a086fa3 net: macb: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
cde5a844fb net: ldpaa_eth: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
3c7e652bbb net: fsl-mc: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
b669c54bfd net: fec_mxc: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
ecca44805d net: ethoc: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
4fb814f571 net: eepro100: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
53fa409f59 net: e1000: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
9f2d365ed3 net: dm9000x: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:17 -05:00
Tom Rini
acb30ccc7c net: designware: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00
Tom Rini
d55a003904 net: dc2114x: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00
Tom Rini
cc2bf624eb net: fm: Remove non-DM_ETH code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00
Tom Rini
2f420f135f net: tsec: Remove non-DM_ETH support code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.  Doing this removes some board support code
which was also unused. Finally, this removes some CONFIG symbols that
otherwise needed to be migrated to Kconfig, but were unused in code now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00
Tom Rini
f6301702c1 net: Remove extraneous dependencies
With DM_ETH being required now for all drivers, we don't need this
listed on individual drivers as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 12:20:17 -05:00
Olivier Moysan
a9aa2aef5f adc: stm32mp15: add support of generic channels binding
Add support of generic IIO channels binding:
./devicetree/bindings/iio/adc/adc.yaml
Keep support of st,adc-channels for backward compatibility.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07 17:00:26 +01:00
Olivier Moysan
1727d46bf9 adc: stm32mp15: split channel init into several routines
Split stm32_adc_chan_of_init channel initialization function into
several routines to increase readability and prepare channel
generic binding handling.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07 17:00:26 +01:00
Gabriel Fernandez
c8df960c8d clk: stm32mp13: introduce STM32MP13 RCC driver
STM32MP13 RCC driver uses Common Clock Framework and also a
'clk-stm32-core' API. Then STM32MPx RCC driver will contain only data
configuration (gates, mux, dividers and the way to check security)
or some specific clocks.
This API will be used by all new other generations of ST Socs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07 16:49:35 +01:00
Tom Rini
9cebc4ad8e post: Migrate to Kconfig
We move the existing CONFIG_POST_* functionality over to CFG_POST and
then introduce CONFIG_POST to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
d948c8988c sandbox: Rework how SDL is enabled / disabled
Given that we can use Kconfig logic directly to see if we have a program
available on the host or not, change from passing NO_SDL to instead
controlling CONFIG_SANDBOX_SDL in Kconfig directly. Introduce
CONFIG_HOST_HAS_SDL as the way to test for sdl2-config and default
CONFIG_SANDBOX_SDL on if we have that, or not.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
5afc87eadb net: ftmac100: Remove non-DM_ETH code
At this point all users of this driver enable DM_ETH, so remove the
legacy code paths.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-12-05 16:08:38 -05:00
Tom Rini
be3bea2ba3 Convert CONFIG_VSC7385_ENET et al to Kconfig
This converts the following to Kconfig:
   CONFIG_VSC7385_ENET
   CONFIG_VSC9953

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:38 -05:00
Tom Rini
a9c3bce362 Convert CONFIG_USB_GADGET_AT91 to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_GADGET_AT91

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
fcd7ba655e Convert CONFIG_TPS6586X_POWER et al to Kconfig
This converts the following to Kconfig:
   CONFIG_TPS6586X_POWER
   CONFIG_TWL6030_POWER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
8ce59b5932 Convert CONFIG_SPD_EEPROM to Kconfig
This converts the following to Kconfig:
   CONFIG_SPD_EEPROM

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
d91365203c Convert CONFIG_SMSC_LPC47M et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SMSC_LPC47M
   CONFIG_SMSC_SIO1007

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
1c34f7885d Convert CONFIG_SH_GPIO_PFC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SH_GPIO_PFC
   CONFIG_TMU_TIMER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
ea467ea1cd Convert CONFIG_RTC_DS1337 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_RTC_DS1337
   CONFIG_RTC_DS1337_NOOSC
   CONFIG_RTC_DS1338
   CONFIG_RTC_DS1374
   CONFIG_RTC_DS3231
   CONFIG_RTC_MC13XXX
   CONFIG_RTC_MXS
   CONFIG_RTC_PT7C4338

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
c3187fb144 Convert CONFIG_PCA953X to Kconfig
This converts the following to Kconfig:
   CONFIG_PCA953X

Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
9200011e95 Convert CONFIG_NAND_KMETER1 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_NAND_ECC_BCH
   CONFIG_NAND_KIRKWOOD
   CONFIG_NAND_KMETER1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
6c03a65275 Convert CONFIG_MXS_OCOTP to Kconfig
This converts the following to Kconfig:
   CONFIG_MXS_OCOTP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
2568bd6db7 arm: Remove unused mx27 code
We no longer have any i.MX27 platforms, remove the remaining support
code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
d5596cbc6e arm: lpc32xx: Remove unused hsuart driver
This driver is not enabled in any config currently, remove it.

Cc: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
0ea156ba00 Convert CONFIG_IMX_VIDEO_SKIP et al to Kconfig
This converts the following to Kconfig:
   CONFIG_IMX_VIDEO_SKIP
   CONFIG_IMX_HDMI

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
d9feb83505 Convert CONFIG_POWER_LTC3676 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_POWER_FSL
   CONFIG_POWER_FSL_MC13892
   CONFIG_POWER_HI6553
   CONFIG_POWER_LTC3676
   CONFIG_POWER_PFUZE100
   CONFIG_POWER_PFUZE3000
   CONFIG_POWER_SPI
   CONFIG_POWER_TPS65090_EC
   CONFIG_POWER_TPS65218
   CONFIG_POWER_TPS65910

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
022dc9e505 Convert CONFIG_HIKEY_GPIO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_HIKEY_GPIO
   CONFIG_TCA642X

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
060613f119 Convert CONFIG_FSL_IIM to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_IIM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
518c5dfab0 power: pmic: Guard non-DM_PMIC drivers with a check for POWER_LEGACY
As we have more legacy PMIC drivers to move to Kconfig, guard them all
with POWER_LEGACY or SPL_POWER_LEGACY. Do the same kind of check for
building the drivers too. This also means that we need to resort the
list slightly in the Makefile.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:43 -05:00
Tom Rini
65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
aa6e94deab global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
ecc8d425fd global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and
CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many
cases they likely should come from the device tree instead. Move these
out of CONFIG namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00