Commit graph

20 commits

Author SHA1 Message Date
Sam Protsenko
3db0989e68 env: ti: boot: Handle reboot reason from BCB
In case of Android boot, reboot reason can be written into BCB (usually
it's an area in 'misc' partition). U-Boot then can obtain that reboot
reason from BCB and handle it accordingly to achieve correct Android
boot flow, like it was suggested in [1]:
  - if it's empty: perform normal Android boot from eMMC
  - if it contains "bootonce-bootloader": get into fastboot mode
  - if it contains "boot-recovery": perform recovery boot

The latter is not implemented yet, as it depends on some features that
are not implemented on TI platforms yet (in AOSP and in U-Boot).

[1] https://marc.info/?l=u-boot&m=152508418909737&w=2

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-31 13:08:07 -04:00
Sam Protsenko
adc097e133 env: ti: boot: Use ttyS2 instead of ttyO2
ttyO2 console enables legacy CONFIG_SERIAL_OMAP driver in kernel.
Nowadays it's preferred to use the generic CONFIG_SERIAL_8250_OMAP
driver, which being enabled via ttyS2 console. Both drivers are enabled
in multi_v7_defconfig and in omap2plus_defconfig, for compatibility
reasons. Let's switch to ttyS2 console, to be sure that standard 8250
serial driver is used.

Similar behavior can be also achieved by enabling
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP option in kernel, but it's better not
to rely on that, as it can be disabled or removed after transitional
period.

Right now on DRA7/AM57x platforms the 8250-omap driver is being probed
first, and omap-serial driver is only probed if the first one failed.
It can be seen from uart3 definition in arch/arm/boot/dts/dra7-l4.dtsi:

    compatible = "ti,dra742-uart", "ti,omap4-uart";

So the kernel already uses 8250 driver. This change basically allows
kernel developers to throw away the omap-serial driver and associated
compatibility options. Similar discussions [1,2] have started several
years ago, so it should be safe to do that now.

[1] https://patchwork.kernel.org/patch/6198471/
[2] http://processors.wiki.ti.com/index.php/Sitara_Linux_UART_-_Switching_to_8250_Driver

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Andrew F. Davis <afd@ti.com>
[trini: Update omap5_uevm]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-27 13:36:54 -04:00
Ruslan Trofymenko
edd31084f2 env: am57xx: Implement A/B boot process
Add support for A/B boot process on AM57xx based boards:

  1. Define 'slot_suffix' variable (using 'ab_select' command)
  2. Extend 'emmc_android_boot' boot command (add commands for A/B boot
     process)

'ab_select' command is used to decide which slot should be used for
booting up. A/B metadata resides in 'misc' partition.

To activate the A/B boot process, the following config options must be
set:

    CONFIG_ANDROID_AB=y
    CONFIG_CMD_AB_SELECT=y

For successful A/B boot, the corresponding A/B infrastructure must be
involved on Android side [1] (including mounting system as root), and
disk must be partitioned accordingly.

When A/B boot is enabled, there are some known limitations currently
exist (not related to A/B patches, need to be implemented later):

  1. The 'Verified Boot' sequence is not supported
  2. dev path to system partition (system_a or system_b) is passed via
     'bootargs' as 'root=' argument like 'root=/dev/mmcblk1p12', but
     further we'll need to rework it with respect to dm-verity
     requirements [2]

In case when A/B partitions are not present in system (and A/B boot is
enabled), boot up process will be terminated and next message will be
shown:

    "boot_a(b) partition not found"

[1] https://source.android.com/devices/tech/ota/ab
[2] https://source.android.com/devices/tech/ota/ab/ab_implement#kernel

Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alistair Strachan <astrachan@google.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-24 13:20:27 -04:00
Sam Protsenko
35e3d2e8a3 arm: ti: boot: Remove legacy Android partitions
Remove unused Android partitions:
  - efs, crypto, cache: we don't use it anymore (images are not built
    in AOSP
  - ipu1, ipu2: IPU firmware is now a part of vendor image and doesn't
    reside as a separate partition

While at it, rename "reserved" partition to "uboot-env", as it's
actually stores U-Boot environment.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
2019-01-09 07:13:32 -05:00
Sam Protsenko
528920f94e arm: ti: boot: Increase system partition size
Android code base is growing, so since Android "Pie" the size of
system.img grew up to be about 740 MiB. Let's increase system.img to
1 GiB to accommodate for those changes and leave some margin for future
changes. We don't want to make it more than 1 GiB, because we should
keep userdata partition big enough (for user files, like media etc.),
and eMMC size on BeagleBoard-X15 is only 3.5 GiB.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Praneeth Bajjuri <praneeth@ti.com>
2018-12-17 08:42:19 -05:00
Sam Protsenko
1e4fb783b3 arm: ti: boot: Fix U-Boot environment partition address
Recent removal of obsolete partition led to shifting of starting address
of "reserved" partition (which reflects U-Boot environment). Fix its
start address to keep it in sync with ENV_OFFSET and DFU environment.

This patch also provides fixed start address for "reserved" partition,
so that we can track when it's shifted next time.

While at it, move it before "misc" partition to keep all Android
partitions together.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-By: Praneeth Bajjuri <praneeth@ti.com>
2018-11-26 22:52:11 -05:00
Sam Protsenko
de8566a160 arm: ti: boot: Don't read environment partition
This part should've been remove in commit 88d60db011 ("arm: ti: boot:
Remove environment partition"), but I missed it somehow. Remove reading
dtb file from environment partition on eMMC, as we don't have it
anymore.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-11-01 10:02:43 -04:00
Sam Protsenko
88d60db011 arm: ti: boot: Remove environment partition
Remove "environment" partition and do not read it when booting Android
from eMMC. We don't use this partition anymore, so this is just an
unintentional leftover.

Earlier we were reading dtb file from "environment" partition to feed it
further to kernel. Now we are using dtb from FIT image ("boot" partition
contains boot_fit.img image), which can be seen from this command:

    bootm ${loadaddr}#${fdtfile}

where "#" character means we have FIT image in ${loadaddr} RAM address.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Praneeth Bajjuri <praneeth@ti.com>
2018-10-22 09:18:49 -04:00
Igor Opaniuk
e883ffe00b am57xx_hs: avb2.0: add support of AVB 2.0
1. Add vbmeta partition info to android partition layout for TI
   platforms.
2. Add support of AVB 2.0 (including avb subset of commands) for am57xx HS

Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
[trini: Move to include/environment/ti/boot.h, reword commit slightly]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-18 14:01:21 -04:00
Sam Protsenko
c90a760ffd arm: ti: boot: Extract PARTS_DEFAULT to boot.h
Eliminate code duplication: the same PARTS_DEFAULT was defined in
am57xx_evm.h and in dra7xx_evm.h. Extract it to environment/boot.h and
use in all OMAP5-based boards.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-05-08 18:50:22 -04:00
Praneeth Bajjuri
b2031ff766 env: ti: android: boot with FIT Image
Boot android over emmc by default thru FIT image

Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Andrew F.Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-05-08 09:07:37 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Sam Protsenko
2c9afab9ac env: ti: boot: Get rid of magic numbers
Get the start address and the size of partitions using partition names
rather than partition numbers. This way we can change the partition
table further without changing the boot code.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-03-13 21:59:27 -04:00
Lokesh Vutla
3741c044cb env: ti: Select dtb name for dra76x and am574
Select dtb name for am574x-idk and dra76x evm with acd package.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19 15:49:27 -05:00
Sam Protsenko
6ca43a58db env: ti: boot: Show boot status information
Add tracing printings to Linux/Android boot commands, so that we can see
what's going on. Helps to trace possible bugs on early stages and
improves the output for user (which is especially useful, because we
have a bunch of boot commands executing one by one).

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-29 14:07:58 -04:00
Sam Protsenko
2717c08485 env: ti: boot: Extract command for eMMC Linux boot
Extract commands for booting Linux from eMMC to separate command. It
seems more logical that way, and allows us to run the whole command set
from U-Boot shell with only one command.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-29 14:07:58 -04:00
Lokesh Vutla
08318317af env: ti: boot: Select dtb name for X15 revC
Select dtb name for am57xx BeagleBoard-X15 revC

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-11 16:23:05 -04:00
Lokesh Vutla
911d76c417 env: ti: boot: Select dtb name for dra76
Select dtb name for dra76-evm.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-11 16:19:44 -04:00
Semen Protsenko
a17c8b1844 arm: omap: Define command for booting Android from eMMC
If SD card is present -- try to boot from it first. If no -- try to boot
Android from eMMC.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-08-26 14:56:11 -04:00
Semen Protsenko
4fd79ac9af arm: omap: Extract OMAP5 boot environment to separate file
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-23 10:38:02 -04:00