Commit graph

19 commits

Author SHA1 Message Date
Patrick Delaunay
757bca8d19 stm32mp1: ram: add pattern parameter in infinite write test
Add pattern for infinite test_read and test_write, that
allow to change the pattern to test without recompilation;
default pattern is 0xA5A5AA55.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
25331ae1c1 stm32mp1: ram: reload watchdog during ddr test
Avoid watchdog during infinite DDR test.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
37f41ae900 stm32mp1: ram: update loop management in infinite test
Reduce verbosity of the infinite tests to avoid CubeMX issue.
test and display loop by 1024*1024 accesses: read or write.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
4b0496fe79 stm32mp1: ram: fix address issue in 2 tests
If user choose to test memory size is 1GByte (0x40000000),
memory address would overflow in test "Random" and
test "FrequencySelectivePattern".
Thus the system would hangs up when running DDR test.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Bossen WU <bossen.wu@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
375c28ac76 stm32mp1: ram: cosmetic: remove unused prototype
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
588448517f ram: stm32mp1_ram: Fix warnings when compiling with W=1
This patch solves the following warnings:

drivers/ram/stm32mp1/stm32mp1_ram.c: In function 'stm32mp1_ddr_clk_enable':
warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
  for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) {
                    ^
drivers/ram/stm32mp1/stm32mp1_ram.c: In function 'stm32mp1_ddr_setup':
warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
  for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
                    ^
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:56 +02:00
Patrick Delaunay
187c41d783 stm32mp1: ram: add tuning in DDR interactive mode
Add command tuning for DDR interactive mode, used during
board bring-up or with CubeMX DDR tools to execute software
tuning for the DDR configuration:
- software read DQS Gating (replace the built-in one)
- Bit de-skew
- Eye Training or DQS training

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:11 +02:00
Patrick Delaunay
0d44752442 stm32mp1: ram: add tests in DDR interactive mode
Add command tests for DDR interactive mode, used during
board bring-up or with CubeMX DDR tools to verify the
DDR configuration.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:11 +02:00
Patrick Delaunay
01a7510849 stm32mp1: ram: add interactive mode for DDR configuration
This debug mode is used by CubeMX DDR tuning tools
or manualy for tests during board bring-up.
It is simple console used to change DDR parameters and check
initialization.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:11 +02:00
Patrick Delaunay
1767ac2d1f stm32mp1: ram: add support for LPDDR2/LPDDR3
Manage power supply configuration for board using stpmic1
with LPDDR2 or with LPDDR3:
+ VDD_DDR1 = 1.8V with BUCK3 (bypass if possible)
+ VDD_DDR2 = 1.2V with BUCK2

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:11 +02:00
Patrick Delaunay
53bb831658 stm32mp1: ram: update parameter array initialization
Force alignment of the size of parameters array with
the expected value in the binding, that allows compilation
error when the array size change.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
Patrick Delaunay
c60fed14f6 stm32mp1: ram: change ddr speed to kHz
Allow fractional support in DDR tools.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
Patrick Delaunay
0cb1aa9409 stm32mp1: ram: increase the delay after reset to 128 cycles
Component Notification DDR controller errata (3.00a):9001313030
Synchronization Time Waited After De-assertion of presetn is
128 pclk Cycles.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
Patrick Delaunay
c3ec370aed stm32mp1: ram: update mask for operating mode
Regression introduced by rebase, when loop
was replaced by readl_poll_timeout() function.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
Patrick Delaunay
abf2678f0f stm32mp1: add trusted boot with TF-A
Add support of trusted boot, using TF-A as first stage bootloader,
The boot sequence is
  BootRom >=> TF-A.stm32 (clock & DDR) >=> U-Boot.stm32

The TF-A monitor provides secure monitor with support of SMC
- proprietary to manage secure devices (BSEC for example)
- PSCI for power

The same device tree is used for STMicroelectronics boards with
basic boot and with trusted boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Masahiro Yamada
d35812368a regmap: change regmap_init_mem() to take ofnode instead udevice
Currently, regmap_init_mem() takes a udevice. This requires the node
has already been associated with a device. It prevents syscon/regmap
from behaving like those in Linux.

Change the first argumenet to take a device node.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07 15:49:51 -04:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Patrick Delaunay
e70f70aa65 ram: stm32mp1: add driver
Add driver and binding for stm32mp1 ddr controller and phy

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00