Commit graph

75541 commits

Author SHA1 Message Date
stroese
08eaea9c9f Patch from Stefan Roese. 2003-06-05 15:44:37 +00:00
stroese
53cf9435cc - CFG_RX_ETH_BUFFER added. 2003-06-05 15:39:44 +00:00
stroese
c602883592 - CFG_ETH_RX_BUFFER added. 2003-06-05 15:38:29 +00:00
stroese
3720878599 - Fix bug for initial stack in data cache as pointed out by Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in data cache can be used even if the chip select is in use. 2003-06-05 15:35:20 +00:00
wdenk
f3e0de60a6 * Patch by Denis Peter, 04 June 2003:
add support for the MIP405T board
2003-06-04 15:05:30 +00:00
wdenk
682011ff69 * Patches by Udi Finkelstein, 2 June 2003:
- Added support for custom keyboards, initialized by defining a
    board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
  - Added support for the RBC823 board.
  - cpu/mpc8xx/lcd.c now automatically calculates the
    Horizontal Pixel Count field.

* Fix alignment problem in BOOTP (dhcp_leasetime option)
  [pointed out by Nicolas Lacressonnière, 2 Jun 2003]

* Patch by Mark Rakes, 14 May 2003:
  add support for Intel e1000 gig cards.

* Patch by Nye Liu, 3 Jun 2003:
  fix critical typo in MAMR definition (include/mpc8xx.h)

* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.

* Patch by Klaus Heydeck, 2 Jun 2003
  Minor changes for KUP4K configuration
2003-06-03 23:54:09 +00:00
wdenk
7a8e9bed17 * Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs.

* Patch by Marc Singer, 28 May 2003:
  Added port I/O commands.

* Patch by Matthew McClintock, 28 May 2003
  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  - minor patches for utx8245

* Patch by Daniel Engström, 28 May 2003:
  x86 update

* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  add nand flash support to SXNI855T configuration
  fix/extend nand flash support:
  - fix 'nand erase' command so does not erase bad blocks
  - fix 'nand write' command so does not write to bad blocks
  - fix nand_probe() so handles no flash detected properly
  - add doc/README.nand
  - add .jffs2 and .oob options to nand read/write
  - add 'nand bad' command to list bad blocks
  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  - make NAND read/write faster

* Patch by Rune Torgersen, 23 May 2003:
  Update for MPC8266ADS board
2003-05-31 18:35:21 +00:00
wdenk
3b57fe0a70 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
instead CFG_MONITOR_LEN is now only used to determine  _at_compile_
  _time_  (!) if the environment is embedded within the U-Boot image,
  or in a separate flash sector.

* Cleanup CFG_DER #defines in config files (wd maintained only)
2003-05-30 12:48:29 +00:00
wdenk
f07771cc28 * Fix data abort exception handling for arm920t CPU
* Fix alignment problems with flash driver for TRAB board

* Patch by Donald White, 21 May 2003:
  fix calculation of base address in pci_hose_config_device()

* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
  execute "cmd2", even if "cmd1" fails. Note that this is different
  to "run var1 var2" where the contents of "var2" will NOT be
  executed when a command in "var1" fails.
2003-05-28 08:06:31 +00:00
wdenk
38b99261c1 Add zero-copy ramdisk support (requires corresponding kernel support!) 2003-05-23 23:18:21 +00:00
wdenk
4c3b21a5f9 Patch by Kyle Harris, 20 May 2003:
In preparation for an ixp port, rename cpu/xscale and arch-xscale
into cpu/pxa and arch-pxa.
2003-05-23 12:36:20 +00:00
stroese
d9ff6e84e4 Patch from Stefan Roese. 2003-05-23 11:49:24 +00:00
stroese
e1e89324ad - ASH405 board added (PPC405EP based).
- CPCI4052 added (PPC405GP based).
- CPCI405AB added (PPC405GP based).
- PCI405 added (PPC405GP based).
- PMC405 added (PPC405GP based).
2003-05-23 11:43:00 +00:00
stroese
549826eaa0 - ASH405 board added (PPC405EP based).
- BUBINGA405EP added (PPC405EP based).
- CPCI405AB added (PPC405GP based).
- PMC405 added (PPC405GP based).
2003-05-23 11:41:44 +00:00
stroese
1d49b1f365 CONFIG_UART1_CONSOLE added. 2003-05-23 11:39:05 +00:00
wdenk
33149b8812 Patch by Denis Peter, 19 Mai 2003:
add support for the MIP405-3 board
2003-05-23 11:38:58 +00:00
stroese
9919f13cc1 DHCP support added. 2003-05-23 11:38:22 +00:00
stroese
071d897c96 PMC405 board added. 2003-05-23 11:35:47 +00:00
stroese
3871842529 Code cleanup. 2003-05-23 11:35:09 +00:00
stroese
b6d9e4f5af New FPGA image with 527 support. 2003-05-23 11:34:40 +00:00
stroese
1545ad35c5 Local Bus Timeout increased. 2003-05-23 11:33:57 +00:00
stroese
c231d00f4e Code reworked for PPC405EP support. 2003-05-23 11:32:53 +00:00
stroese
d4629c8c8d CPCI405AB (special version of esd CPCI405) board added. 2003-05-23 11:30:39 +00:00
stroese
46578cc018 BUBINGA405EP board added (IBM PPC405EP Eval Board). 2003-05-23 11:28:55 +00:00
stroese
c93f70962b ASH405 board added (PPC405EP based). 2003-05-23 11:27:18 +00:00
stroese
8749cfb44e - PPC405EP support added.
- CONFIG_UART1_CONSOLE added (see README).
2003-05-23 11:25:57 +00:00
stroese
b867d705b6 PPC405EP support added. 2003-05-23 11:18:02 +00:00
stroese
bedc497029 - PPC405EP support added.
- "nand_init" (NAND FLASH) added.
2003-05-23 11:16:49 +00:00
wdenk
5d232d0e7e * Patch by Dave Ellis, 22 May 2003:
Fix problem with only partially cleared .bss segment

* Patch by Rune Torgersen, 12 May 2003:
  get PCI to work on a MPC8266ADS board; incorporate change to
  cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
2003-05-22 22:52:13 +00:00
wdenk
c8c3a8be2d Add support for arbitrary bitmaps for TRAB's VFD command;
allow to pass boot bitmap addresses in environment variables;
allow for zero boot delay
2003-05-21 20:26:20 +00:00
wdenk
82226bf4d2 * Add support for arbitrary bitmaps for TRAB's VFD command
* Patch by Christian Geißinger, 19 May 2002:
  On TRAB: wait until the dummy byte has been completely sent
2003-05-20 20:49:01 +00:00
wdenk
7f70e85309 * Patch by David Updegraff, 22 Apr 2003:
update for CrayL1 board

* Patch by Pantelis Antoniou, 21 Apr 2003:
  add boot support for ARTOS (a proprietary OS)

* Patch by Steven Scholz, 11 Apr 2003:
  Add support for RTC DS1338

* Patch by Rod Boyce, 24 Jan 2003:
  Fix counting of extended partitions in diskboot command
2003-05-20 14:25:27 +00:00
wdenk
59de2ed6b5 Patch by Christophe Lindheimer, 20 May 2003:
allow the use of CFG_LOADS when CFG_NO_FLASH is set
2003-05-20 10:58:04 +00:00
wdenk
86d82762f6 Fix SDRAM timing on Purple board 2003-05-20 10:39:44 +00:00
wdenk
66fd3d1ce7 Add support for CompactFlash on ATC board
(includes support for Intel 82365 and compatible PC Card controllers,
and Yenta-compatible PCI-to-CardBus controllers)
2003-05-18 11:30:09 +00:00
wdenk
45219c4660 Patch by Mathijs Haarman, 08 May 2003:
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
2003-05-12 21:50:16 +00:00
wdenk
f7de16ae25 Fix SDRAM initialization 2003-05-12 09:51:52 +00:00
wdenk
d6815435c0 Add default switch settings. 2003-05-12 09:51:00 +00:00
wdenk
e600962991 Fix ATC board configuration and flash driver 2003-05-05 17:09:41 +00:00
wdenk
9c62cc58b8 Fix problem with usage of "true" (undefined in current versions of bfd.h) 2003-05-03 23:33:47 +00:00
wdenk
7aa7861471 * Add support for Promess ATC board
* Patch by Keith Outwater, 28 Apr 2003:
  - Miscellaneous corrections and additions to GEN860T board specific code.
  - Added GEN860_SC variant to GEN860T.
  - Miscellaneous corrections to GEN860T documentation.
  - Correct duplicate entry in U-Boot CREDITS file.
  - Add GEN860T_SC entry in MAINTAINERS file.
  - Update CREDITS file with GEN860T_SC info.

* Update Smiths Aerospace addresses in MAINTAINERS file

* Fix error handling in hush's version of "run" command
2003-05-03 15:50:43 +00:00
wdenk
4532cb696e * LWMON extensions:
- Splashscreen support
  - modem support
  - sysmon support
  - temperature dependend enabling of LCD

* Allow booting from old "PPCBoot" disk partitions

* Add support for TQM8255 Board / MPC8255 CPU
2003-04-27 22:52:51 +00:00
wdenk
02c9bed451 *** empty log message *** 2003-04-20 17:41:25 +00:00
wdenk
53cad435bb Make compile clean 2003-04-20 17:26:01 +00:00
wdenk
059ae173e9 Add files needed for bitmap load support 2003-04-20 16:52:09 +00:00
wdenk
824a1ebffe Compile fixes 2003-04-20 16:49:37 +00:00
wdenk
d791b1dc3e * Make sure Block Lock Bits get cleared in R360MPI flash driver
* MPC823 LCD driver: Fill color map backwards, to allow for steady
  display when Linux takes over

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS (this time for real).

* Add support for "bmp info" and "bmp display" commands to load
  bitmap images; this can be used (for example in a "preboot"
  command) to display a splash screen very quickly after poweron.

* Add support for 133 MHz clock on INCA-IP board
2003-04-20 14:04:18 +00:00
wdenk
4a6fd34b26 * Patch by Lutz Dennig, 10 Apr 2003:
Update for R360MPI board

* Add new meaning to "autostart" environment variable:
  If set to "no", a standalone image passed to the
  "bootm" command will be copied to the load address
  (and eventually uncompressed), but NOT be started.
  This can be used to load and uncompress arbitrary
  data.

* Set max brightness for MN11236 displays on TRAB board
2003-04-12 23:38:12 +00:00
stroese
69f8f827d5 Patch from Stefan Roese. 2003-04-10 13:30:28 +00:00
stroese
759a51b4f3 Changed DHCP client to use ip address from server option field #54 from the OFFER-paket in the server option field #54 in the REQUEST-paket. This fixes a problem using a Windows 2000 DHCP server, where the DHCP-server is not the TFTP-server. 2003-04-10 13:26:44 +00:00