Commit graph

10 commits

Author SHA1 Message Date
Claudiu Beznea
63ba551d70 ARM: dts: at91: sam9x60: add bindings for CPU
Add bindings for CPU. This will allow displaying correctly the crystal,
CPU and master clock.

Reported-by: Eugen Hristev <eugen.hristev@microchip.com>
Fixes: a64862284f ("clk: at91: sam9x60: add support compatible with
CCF")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-09-21 10:05:37 +03:00
Eugen Hristev
1a5c5b716c ARM: dts: at91: sam9x60: enable slewrate/high drive for sdhci0 pinout
Align the pin setup for sdhci0 with linux kernel.
This means to have slew rate enable and high drive strength.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2020-11-26 10:12:47 +02:00
Claudiu Beznea
c37d59a170 ARM: dts: sam9x60: use CCF compatibles for PMC
Use CCF compatible for PMC. With this, the board/SoC will be
able to boot.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-19 09:19:53 +03:00
Claudiu Beznea
dbe10b6274 ARM: dts: sam9x60: use slow clock CCF compatible bindings
Use slow clock CCF compatible DT bindings. This will not break
the above functionality as the SoC is not booting with current
PMC bindings.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-19 09:19:53 +03:00
Claudiu Beznea
ffd204f347 ARM: dts: sam9x60ek: add clock frequencies to board file
Slow Xtal and Main Xtal are board specific. Add their proper
frequency to board file.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-19 09:19:53 +03:00
Eugen Hristev
2d604ed852 ARM: dts: sam9x60: add flx0 node
Add node for Flexcom0.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24 13:01:57 +03:00
Eugen Hristev
223cab5efb ARM: dts: at91: sam9x60: add onewire node
Add onewire node for w1 support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Tudor Ambarus
228f9e0244 ARM: dts: at91: sam9x60ek: Enable qspi node
The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
access, the other for the qspi core and phy. Both are mandatory.

Enable the qspi node together with the SST26VF064B qspi nor flash
memory. Booting from the QSPI NOR flash is now possible.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Nicolas Ferre
885554360d ARM: dts: at91: sam9x60: Add macb0 Ethernet controller
Add Ethernet controller to dtsi file and enable it on sam9x60ek
platform connected with rmii.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-10-08 09:16:11 +03:00
Sandeep Sheriker Mallikarjun
f99e0ad25a ARM: dts: Add dts files for sam9x60ek
add device tree files for sam9x60ek board with below changes.

- Add initial device nodes (pmc, pinctrl, sdhc, dbgu & pit)
- Add the reg property for the pinctrl node.
- Add the "u-boot,dm-pre-reloc" property to determine which nodes
  are used by the board_init_f stage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[prasanthi.chellakumar@microchip.com: fix style/whitespace issues]
Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
[nicolas.ferre@microchip.com:
- fix gclk,
- fix pio/pinctrl controller definition and allow to have more
  than only PIOA for this SoC,
- removing pinctrl address]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com:
- use SAM9X60's compatible for pinctrl
- add drive strength and slew rate options for SDMMC0 pins.]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[tudor.ambarus@microchip.com:
- u-boot,dm-pre-reloc property in dedicated file,
- fix pit len, starts from 0xFFFFFE40 and it is of len 0x10]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00