Commit graph

55451 commits

Author SHA1 Message Date
Alexander Graf
409f05f259 fdt: update bcm283x device tree sources to Linux 4.14 state
Upstream Linux has received a few device tree updates to the RPi
which we should propagate into the builtin U-Boot one as well to
gain hardware support.

This patch bumps the dts files to their 4.14 Linux counterparts
with the exception of sdhost on 32bit RPi versions. There we stay
with iproc as the sdhost driver is missing in U-Boot.

Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-16 09:42:51 -04:00
Tom Rini
b351ccf11a part_efi: In is_gpt_valid() check argument validity before allocation
While this goes somewhat against normal coding style we should ensure
that dev_desc is not NULL before we dereference it in allocation of
legacy_mbr.

Reported-by: Coverity (CID: 167292)
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16 09:42:51 -04:00
ext-vasily.gurevich@vaisala.com
c12d8b7d70 SPL: FIT: Kconfig: Change SPL_FIT_IMAGE_POST_PROCESS entry
Remove depends on TI_SECURE_DEVICE for other platforms.

Signed-off-by: Vasily Gurevich <ext-vasily.gurevich@vaisala.com>
2017-10-16 09:42:51 -04:00
Masahiro Yamada
7d9927c895 clk: uniphier: add NAND controller clock
This allows the NAND driver to enable clock and get its clock rate.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
a89b9bc095 mtd: nand: denali_dt: add clock support
Enable clock in the probe hook.  The clock rate will be necessary
when setup_data_interface hook is supported.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
c7372d61fd ARM: uniphier: adjust ifdefs for new UniPhier DWC3 CONFIG
Now USB 3.0 feature is enabled/disabled by CONFIG_USB_DWC3_UNIPHIER.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
d37d31849c ARM: uniphier: enable DWC3 xHCI driver
Enable CONFIGs for the DWC3 core and the UniPhier specific glue layer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
5e5edca27c ARM: uniphier: change the default of SoC select to UNIPHIER_V7_MULTI
ARCH_UNIPHIER_V8_MULTI depends on !SPL, so the default may be hidden.
Use a clearer default.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
def4eadba9 reset: uniphier: fix the first argument passed to dev_err()
priv->dev does not exist.  Pass the correct pointer to udevice.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
ab05406e73 clk: uniphier: add PXs3 clock data
Add basic clock data for Socionext's new SoC PXs3.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
d6c7ee7d28 clk: uniphier: rework for better clock tree structure
U-Boot does not support fancy clock tree structures like the Linux
common clock framework.  Implement a simple clock tree model at the
driver level.  With this, the clock data will be simplified.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
2b7b2df91e i2c: uniphier-f: replace debug() with dev_dbg()
Use dev_dbg() functions.  It will be helpful to prefix log messages
with the corresponding device name when the core framework is ready.

While I am here, I renamed "dev", which was actually private data,
into "priv" because dev->dev looks confusing.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:25 +09:00
Masahiro Yamada
804cf1c46f i2c: uniphier: replace debug() with dev_dbg()
Use dev_dbg() functions.  It will be helpful to prefix log messages
with the corresponding device name when the core framework is ready.

While I am here, I renamed "dev", which was actually private data,
into "priv" because dev->dev looks confusing.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
4bb3dac772 usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h>
Including <common.h> pulls in a lot of bloat.  What this driver needs
is BIT(), so replace it with <linux/bitops.h>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
dd74b945af ARM: uniphier: use pr_() instead of printf() where appropriate
Replace printf() with pr_() to specify proper loglevel.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
f73cfb4d0d pinctrl: uniphier: simplify input enable and delete pin arrays
The pin data are implemented for old SoCs to specify the bit shift of
the IECTRL register.  They are not wortwhile given the required memory
footprint.  Delete all the pin data and enable all bits of the IECTRL
register.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
c906032c04 pinctrl: uniphier: set PUPD_SIMPLE cap flag for PXs3
Like other recenct UniPhier SoCs, the pupdctrl number of PXs3
matches to the pin number.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
0f72b74b32 ARM: dts: uniphier: update GPIO nodes
Switch to the single node design.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
c5fb1c2524 gpio: uniphier: rework single device node model
First, I implemented this driver as per-bank model, but it was
a design mistake.

  - There are 31 banks in the maximum case.  It is painful to add
    so many nodes to DT.

  - The IRQ control registers are shared between banks.  Per-bank
    design is a problem for Linux.  The counterpart for Linux turned
    around to the single node model.

Rework based on the driver for Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
83ee44ab9e ARM: uniphier: switch to CONFIG_ENV_IS_NOWHERE
The non-volatile storage varies board by board.  The default should
be NOWHERE.  Please choose a proper device via Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
fe3fddfad7 mtd: nand: do not check R/B# for CMD_SET_FEATURES in nand_command(_lp)
Set Features (0xEF) command toggles the R/B# pin after 4 sub feature
parameters are written.

Currently, nand_command(_lp) calls chip->dev_ready immediately after
the address cycle because NAND_CMD_SET_FEATURES falls into default:
label.  No wait is needed at this point.

If you see nand_onfi_set_features(), R/B# is already cared by the
chip->waitfunc call.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

[ Linux commit: c5d664aa5a4c4b257a54eb35045031630d105f49 ]
2017-10-15 22:32:10 +09:00
Masahiro Yamada
6f29c7a8f1 mtd: nand: do not check R/B# for CMD_READID in nand_command(_lp)
Read ID (0x90) command does not toggle the R/B# pin.  Without this
patch, NAND_CMD_READID falls into the default: label, then R/B# is
checked by chip->dev_ready().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

[ Linux commit: 3158fa0e739615769cc047d2428f30f4c3b6640e ]
2017-10-15 22:31:35 +09:00
Chris Packham
ce3ba458a8 moveconfig: fix error message in do_autoconf()
Move the % arch outside the double quote so that the missing toolchain
message is displayed correctly.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 18:13:13 +09:00
Tom Rini
f855a7bc12 Patch queue for efi - 2017-10-13
This is the second batch of amazing improvements for efi_loader in 2017.11:
 
   - New self tests to verify our own code
   - A few bug fixes
   - colored text support
   - event and SNP improvements, should get us close to iPXE working
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZ4HqlAAoJECszeR4D/txgZ0YQAIwd158lVczf/cMnzf3UcIsH
 e4YUFvQJaGxJw5hccaewaEQJqtPhEEJuHnzc683XDoYISTgvzCyhNEs8o0f7LcX3
 41c50x2bQPz7oFO5N60m58RknHqKiGd5VAC6+r4vBM8C0zFHeNTULo4fzn1qRgb3
 YUHDiRMlToVZXCOkbCeFm+dEJvjkXWmDDDdJpFIgDs6Oj+jOuV+H1GRMF2d56V6r
 Dd4/QPAFl4sRprBAMlvsmuI7obwnGV7/aA4CHIlUqKOVcbddBq2KigX8ZpIYEpaf
 FhRfxRLuWqvDRKpn+ixKfgl4KiBE/CH7sg7F6Un0mIjQVvo8k22Jbetqi9m1j/+x
 YzIFnwzb9ZhQEFOmfHnH8M9+bMmHyW46wkS4gdO4OAd/W0SeyIZ0a0gB1prgb2LK
 RfYQ37WsZM5TRARlcvmJt4H5+EtRYLT8lLf+yPSuyX8/8ubVnYHWtVE1IMLCiCAG
 eVmTwfjLzo3c703RJd9rwDtE13lTQmIHczM4cWybQzooXA6ePLJpSZSWx7EJxdQq
 GC7jNIKyKpu2NjhM9fUssbU+SiYLaIvtUBSOlGrcP1TCVR/j8OQ0Y1eIc9xOprIi
 +VEZVB/Z59D8j2TMTn1Xr+hB9i5h9ZxcO88gdEwfs65uihfvJGVhV1AxTyiaxvNv
 novPhik2UyHG5buRHb2Y
 =PiNi
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2017-10-13

This is the second batch of amazing improvements for efi_loader in 2017.11:

  - New self tests to verify our own code
  - A few bug fixes
  - colored text support
  - event and SNP improvements, should get us close to iPXE working
2017-10-13 09:53:58 -04:00
Heinrich Schuchardt
abe994633b efi_selftest: correctly check return values
When cancelling the timer we should check the return
value provided by the set_timer service.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-13 10:24:22 +02:00
Tom Rini
26f9184e09 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-10-12 13:36:58 -04:00
Tom Rini
e11d2fff73 Merge git://www.denx.de/git/u-boot-imx 2017-10-12 13:36:37 -04:00
Marek Vasut
0a333602df ARM: imx6: Add DHCOM i.MX6 PDK board support
Add support for the DHCOM i.MX6 PDK board. This board has:
- FEC ethernet
- EHCI USB host
- 3x SDMMC

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2017-10-12 18:01:06 +02:00
Uri Mashiach
1a95913979 imx: mx7: spl: remove redundant SATA definitionas
The i.MX7 SOC doesn't include the SATA interface.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 18:00:46 +02:00
Diego Dorta
e2000731ae mx6: sys_proto: Add prototypes for imx6_pcie_toggle() functions
When compiling with W=1 errors are observed:

drivers/pci/pcie_imx.c:517:12: warning: no previous prototype for ‘imx6_pcie_toggle_power’ [-Wmissing-prototypes] __weak int imx6_pcie_toggle_power(void)

drivers/pci/pcie_imx.c:528:12: warning: no previous prototype for ‘imx6_pcie_toggle_reset’ [-Wmissing-prototypes] __weak int imx6_pcie_toggle_reset(void)

Remove these warnings by adding the functions prototypes on arch-mx6/sys_proto.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12 18:00:18 +02:00
Diego Dorta
342b4b09b1 mx6: clock: Add a prototype for do_mx6_showclocks()
When compiling with W=1 the following warning is observed:

arch/arm/mach-imx/mx6/clock.c:1268:5: warning: no previous prototype for ‘do_mx6_showclocks’ [-Wmissing-prototypes] int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

Remove this warning by adding the function prototype into arch-mx6/clock.h file.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12 18:00:01 +02:00
Anatolij Gustschin
fe12386c2a i.mx6ul: xpress: update UART init for current board revision
UART pinmux has been changed on the last board revision. Change
board pinmux accordingly. Console is on UART7 now, add pinmux,
base address and update console string in environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12 17:58:42 +02:00
Fabio Estevam
a0046393da mx6slevk: Use PARTUUID to specify the rootfs location
mx6slevk can run different kernel versions, such as NXP 4.1 or mainline.

Currently the rootfs location is passed via mmcblk number and the
problem with this approach is that the mmcblk number for the SD
card changes depending on the kernel version.

In order to avoid such issue, use the UUID method to specify the
rootfs location.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 17:58:15 +02:00
Sven-Ola Tuecke
b2915ba25e drivers: pci: imx: fix imx_pcie_remove function
We have at least a minor count of boards, that failed to re-initialize
PCI express in the Linux kernel. Typical failure rate is 20% on affected
boards. This is mitigated by commit 6ecbe13756 ("drivers: pci: imx:
add imx_pcie_remove function").

However, at least on some i.MX6 custom boards, when calling
assert_core_reset() as part of the first-time PCIe init, read access
to PCIE_PL_PFLR simply hangs. Surround this readl() with
imx_pcie_fix_dabt_handler() does not help. For this reason, the forced
LTSSM detection is only used on the second assert_core_reset() that is
called shorly before starting the Linux kernel.

Signed-off-by: Sven-Ola Tuecke <sven-ola.tuecke@numberfour.eu>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: David Müller <d.mueller@elsoft.ch>
2017-10-12 17:56:28 +02:00
Fabio Estevam
066d97c733 wandboard: Add support for the latest revd1 revision
Latest wandboard hardware revision is revd1, which brings the following
new features:

- PFUZE100 PMIC
- AR8035 Ethernet PHY
- Upgrade Wifi/BT chip to BCM4339/BCM43430.

The detection mechanism is to probe the PMIC and when it is
found, then the revision of the board is revd1.

As the detection is done via PMIC, we need to print the board version
at a later stage via CONFIG_DISPLAY_BOARDINFO_LATE and also need
to disable CONFIG_DISPLAY_BOARDINFO, which is done much earlier.

Make the necessary adjustments for the AR8035 PHY to work on revd1.

Based on Richard Hu's work from Technexion's U-Boot tree.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 17:31:16 +02:00
Stefan Agner
accb428402 doc: update imx_usb_loader URL
The changes required to use U-Boot's Serial Download Protocol
implementation are now available in upstream imx_usb_loader
repository. Update the URL accordingly.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-12 17:31:16 +02:00
Ilya Ledvich
6963204c4c arm: imx7d: add support for Compulab cl-som-imx7
Add initial support for Compulab cl-som-imx7 SoM.
The initial support includes:
 - MMC
 - eMMC
 - SPI flash
 - I2C
 - FEC
 - USB
 - Serial console

Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
2017-10-12 17:31:16 +02:00
Uri Mashiach
c5c6f37a04 imx: mx7: SPL support for i.MX7
Add configuration file and spl_boot_device function for the i.MX7 SPL.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12 17:31:16 +02:00
Uri Mashiach
258bad41ac imx: mx7: DDR controller configuration for the i.MX7 architecture
The configuration files imximage.cfg are used for the DDR controller
configuration.
Add DDR configuration function to replace the DDR controller
configuration in the imximage.cfg file. The function can be used for
DDR size detection.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12 17:31:16 +02:00
Uri Mashiach
8bf2d77806 imx: mx7: fix the CCM_ macros
The CCM_ macros use the CCM_BASE_ADDRESS macro, which doesn't exist.
Replace the CCM_BASE_ADDRESS macros with CCM_BASE_ADDR.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2017-10-12 17:31:16 +02:00
Jagan Teki
683a06b1dc icorem6_rqs: env: Return mmc devno
Instead of changing mmc devno from dts nodes better
to return the detected devno so-that env trigger the same.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-10-12 17:31:16 +02:00
Jagan Teki
913bdd65d3 icore: configs: Fix merge conflict issue
Fix for finding mmc devices on i.MX6Q icore boards
added in below comment
"icorem6: Fix to find MMC devices"
(sha1: a2b137b38d)

which is reverted in during u-boot-imx merge
" Merge git://git.denx.de/u-boot-imx"
(sha1: 6aee2ab68c)

This patch, is recreated to fix merge conflict.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-10-12 17:31:16 +02:00
Fabio Estevam
fadcf4811a topic_miami: Remove CONFIG_CMD_BOOTZ undef
CONFIG_CMD_BOOTZ option has been converted to defconfig, so there
is no need to undefine it in board config file anymore.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 17:31:16 +02:00
Diego Dorta
adaf7c9f13 mx6sabresd: Include <usb/ehci-ci.h> header file
When compiling with W=1 the following warning is observed:

board/freescale/mx6sabresd/mx6sabresd.c:586:5: warning: no previous prototype for ‘board_ehci_hcd_init’ [-Wmissing-prototypes] int board_ehci_hcd_init(int port)

Remove this warning by including <usb/ehci-ci.h>.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12 17:31:16 +02:00
Diego Dorta
2dcff642ef usb: ehci-ci: Add a prototype for board_ehci_power()
When compiling with W=1 the following warning is observed:

board/freescale/mx6sabresd/mx6sabresd.c:601:5: warning: no previous prototype for ‘board_ehci_power’ [-Wmissing-prototypes] int board_ehci_power(int port, int on)

Remove this warning by adding the function prototype into usb/ehci-ci.h file.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12 17:31:16 +02:00
Diego Dorta
adf9bd3b23 mx6sabresd: Include <asm/mach-imx/spi.h> header file
When compiling with W=1 the following warning is observed:

board/freescale/mx6sabresd/mx6sabresd.c:680:5: warning: no previous prototype for ‘board_spi_cs_gpio’ [-Wmissing-prototypes] int board_spi_cs_gpio(unsigned bus, unsigned cs)

Remove this warning by including <asm/mach-imx/spi.h>.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12 17:31:16 +02:00
Diego Dorta
c49fa34e5b mx6: soc: Include <asm/bootm.h> header file
When compiling with W=1 the following warning is observed:

arch/arm/mach-imx/mx6/soc.c:213:12: warning: no previous prototype for ‘get_board_rev’ [-Wmissing-prototypes] u32 __weak get_board_rev(void)

Fix the build warning by including <asm/bootm.h>.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12 17:31:16 +02:00
Fabio Estevam
d26e2c8453 mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
CONFIG_CMD_BOOTZ symbol does not work in board config file
anymore, so fix this by moving it to Kconfig.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2017-10-12 17:31:16 +02:00
Diego Dorta
9f272573b7 imx: sys_proto: Add a prototype for board_mmc_get_env_dev()
When compiling with W=1 the following warning is observed:

board/freescale/mx6sabresd/mx6sabresd.c:266:5: warning:
no previous prototype for ‘board_mmc_get_env_dev’
[-Wmissing-prototypes] int board_mmc_get_env_dev(int devno)

Remove this warning by adding the function prototype into sys_proto.h file.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12 17:31:16 +02:00
Diego Dorta
7594c51ae6 imx: Include <input.h> header file
When building with W=1 errors like the one below is seen:

board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning:
no previous prototype for ‘overwrite_console’
[-Wmissing-prototypes] int overwrite_console(void)

Fix the build warnings by including <input.h>.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 17:31:16 +02:00