Allow reading the command line from a zimage, so that it can be recorded
in the bootflow.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a direct interface to booting a zimage, so that bootstd can call it
without going through the command-line interface.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some Linux parameters can be set automatically by U-Boot, if it knows the
device being used. For example, since U-Boot knows the serial console
being used, it can add parameters for earlycon and console.
Add support for this.
Note that this is an experimental feature and we will see how useful it
turns out to be. It is very handy for ChromeOS, since otherwise it is very
difficult to manually determine the UART address or port number,
particularly in a script.
Provide an example of how this is used with ChromeOS.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Drop use of the distro boot script and use standard boot instead.
Moving to a text-based environment would be desirable also, but requires
additional work.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
We want to enable some of the more interesting bootstd features. Move SPL
up to create some room for the larger U-Boot binary. Also disable
microcode since this is not needed
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a bootflow command to update the command line more easily. This allows
changing a particular parameter rather than editing a very long strings.
It is also easier to handle with scripting.
The new 'bootflow cmdline' command allows getting and setting single
parameters.
Fix up the example output while we are here, since there are a few new
items.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The Linux command line consists of a number of words with optional values.
At present U-Boot allows this to be changed using the bootargs environment
variable.
But this is quite painful, since the command line can be very long.
Add a function which can adjust a single field in the command line, so
that it is easier to make changes before booting.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
It is useful to see the detailed setting of the serial port, e.g. to
allow setting up earlycon or console for Linux. Add this output to the
'bdinfo' command.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: squashed in 20230716033929.253357-2-sjg@chromium.org]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
On x86 boards Linux uses a block of binary data to provide information
about the command line, memory map, etc. Provide a way to store this in
the bootflow so it can be passed on to the OS.
No attempt is made to generalise the code, since other archs don't need
this information. The field is present always, though, to avoid needing
accessors or #ifdefs when building code on other archs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The "bootargs" environment variable is used to set the command-line
arguments to pass to the OS. Use this same mechanism with bootstd as well.
When the variable is updated, it is written to the current bootflow. When
the current bootflow is updated, the environment variable is updated too.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some operating systems have a command line which can be adjusted before
booting. Store this in the bootflow so it can be controlled within
U-Boot.
Fix up the example output while we are here, since there are a few new
items.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
It seems better to call this a 'bootdev' since this is name used in the
documentation. The older 'Bootdevice' name is no-longer used and may cause
confusion with the 'bootdevice' environment variable.
Update throughout to use bootdev.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Many tests don't actually use the devicetree at all so there is no point
in running the tests both with livetree and flat tree. Check for this and
skip the flat tree test in that case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
To enforce anti-rollback to any older version, dtb must be
always update manually. This should be described in the
documentation.
This commit also adds the recommendation that secure system should not
enable the fdt command because lowest-supported-version
property in device tree can be changed by fdt command.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
The main README file is the wrong place to document how different terminal
emulations can be used to access the U-Boot serial console. C-Kermit which
requires a configuration file or several commands to access the U-Boot
console may not be the preferred choice for newcomers. The provided wiki
link is invalid.
The man-pages for loadb and loads already show how to use the commands with
picocom.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We recently fixed a few issues wrt to controller handling. Add a few
test cases to cover the new code.
- return EFI_DEVICE_ERROR the first time the protocol interface of
the controller is uninstalled, after all the children have been
disconnected. This should make the drivers reconnect
- add tests to verify controllers are reconnected when uninstalling a
protocol fails
- add tests to make sure EFI_NOT_FOUND is returned if a non existent
interface is being removed
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Up to now we did not check the return value of DisconnectController.
A previous patch is fixing that taking into account what happened during
the controller disconnect. But that check takes place before our code
is trying to figure out if the interface exists to begin with. In case a
driver is not allowed to unbind -- e.g returning EFI_DEVICE_ERROR, we
will end up returning that error instead of EFI_NOT_FOUND.
Add an extra check on the top of the function to make sure the protocol
interface exists before trying to disconnect any drivers
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
efi_uninstall_protocol() calls efi_disconnect_all_drivers() but never
checks the return value. Instead it tries to identify protocols that
are still open after closing the ones that were opened with
EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL, EFI_OPEN_PROTOCOL_GET_PROTOCOL
and EFI_OPEN_PROTOCOL_TEST_PROTOCOL.
Instead of doing that, check the return value early and exit if
disconnecting the drivers failed. Also reconnect all the drivers of
a handle if protocols are still found on the handle after disconnecting
controllers and closing the remaining protocols.
While at it fix a memory leak and properly free the opened protocol
information when closing a protocol.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
efi_disconnect_controller() doesn't reconnect drivers in case of
failure. Reconnect the disconnected drivers properly
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The boot variables automatically generated for removable medias
should be with short form of device path without device nodes.
This is a requirement for the case that a removable media is
plugged into a different port but is still able to work with the
existing boot variables.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Correct the return code for out-of-memory and no boot option found
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Rename and move bootorder and bootoption apis from cmd to lib
for re-use between eficonfig and bootmgr
Fix 'unexpected indentation' when 'make htmldocs' after functions
are moved
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Flushing kernel image after decompression was taking 113 milliseconds
with U-boot 2022.10. With U-boot 2023.01 and 2023.04, flushing
the same amount of memory takes approx 1.5 seconds. With
U-boot 2023.07-rc6, it takes 6.5 seconds.
powerpc flush_cache() function used to call WATCHDOG_RESET() after
flushing every cacheline. At that time WATCHDOG_RESET() was light
so the operation was almost seamless.
But commit 29caf9305b ("cyclic: Use schedule() instead of
WATCHDOG_RESET()") replaced WATCHDOG_RESET() by schedule() and that
started to hurt with U-boot 2022.10.
And in U-boot 2023.07-rc6 that's even worse after
commit 26e8ebcd7c ("watchdog: mpc8xxx: Make it generic").
In the meantime commit 729c1fe656 ("powerpc: introduce
CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD") gives us the opportinity to
only call schedule() every given chunk of data instead of every
cacheline. As explained in that commit there is no point in pinging
the watchdog after every cacheline flush, so lets define a sensible
default chunk size of 4k which matches to size of a page on most
powerpc platforms.
With that new default threshold, the culprit flushing performed after
kernel image decompression now takes 85 milliseconds on a powerpc 8xx.
Fixes: 29caf9305b ("cyclic: Use schedule() instead of WATCHDOG_RESET()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Uncompressing a 1.7Mbytes FIT image on U-boot 2023.04 takes
approx 7s on a powerpc 8xx.
The same on U-boot 2023.07-rc6 takes approx 28s unless watchdog
is disabled.
During that decompression, LzmaDec_DecodeReal() calls schedule
1.6 million times, that is every 4µs in average.
In the past it used to be a call to WATCHDOG_RESET() which was
just calling hw_watchdog_reset().
But the combination of commit 29caf9305b ("cyclic: Use schedule()
instead of WATCHDOG_RESET()") and commit 26e8ebcd7c ("watchdog:
mpc8xxx: Make it generic") results in an heavier processing.
However, there is absolutely no point in calling schedule() that
often.
By moving and keeping only one call to schedule() in the main
loop the number of calls is reduced to 1.2 million which is still
too much. So add logic to only call schedule every 1024 times.
That leads to a call to schedule approx every 6ms which is still
far enough to entertain the watchdog which has a 1s timeout on
powerpc 8xx.
powerpc 8xx being one of the slowest targets we have today in
U-boot, and most other watchdogs having a timeout of one minutes
instead of one second like the 8xx, this fix should not have
negative impact on other targets.
Fixes: 29caf9305b ("cyclic: Use schedule() instead of WATCHDOG_RESET()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Instead of using the hard-coded value of 0x1f, use 'TASK_TAG'
macro instead to construct the ucd_req_ptr->header.dword_0
This is in sync with what the Linux UFS driver does, i.e.
set the byte0 equal to TASK_TAG (see [1]).
Setting it to a fixed value of 0x1f is wrong as we define
TASK_TAG as 0 inside u-boot ufs framework. So, instead we
should use the macro value directly.
[1]. https://github.com/torvalds/linux/blob/master/drivers/ufs/core/ufshcd.c#L2705
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
This driver considers that a node with an empty label is the top.
But the led class has changed, if a label is not provided for a led,
the label is filed with the node name. So we update this driver
to use a wrapper to manage the top led node.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
In case of OF_SEPARATE (!OF_EMBED), the devicetree blob is placed
after _end, and fdt_find_separate() always returns _end. There is
a .bss section after _end and the section is cleared before relocation.
When GD_FLG_SKIP_RELOC is set, relocation is skipped, so the blob is
still in .bss section, but will be cleared. As a result, the devicetree
become invalid.
To avoid this issue, should relocate it regardless of GD_FLG_SKIP_RELOC
in reloc_fdt().
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This fixes CVE-2022-37434 [1] and bases on 2 commits from Mark
Adler's zlib master repo - the original fix of CVE bug [2] and
the fix for the fix [3].
[1]
https://github.com/advisories/GHSA-cfmr-vrgj-vqwv
[2]
eff308af42
[3]
1eb7682f84
Fixes: e89516f031 ("zlib: split up to match original source tree")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
The different CPSW sub-system Ethernet ports have different PHY mode
control registers. In order to allow the modes to get configured
independently only the register for the port in question must be
accessed, otherwise we would just be re-configuring the mode for port 1,
while leaving all others at their power-on defaults. Fix this issue by
adding a port-number based offset to the mode control base register
address based on the fact that the control registers for the different
ports are spaced exactly 0x4 bytes apart.
Fixes: 9d0dca1199 ("net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver")
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
While NFS is widely used in data centres, and private
networks it's quite a nuanced usecase for device firmware.
A lot of devices already disable it.
Various network protocols should really be opt in, not opt
out, because they add extra size and are potential attack
vectors from a security PoV. In the NFS case it doesn't
really make sense for a lot of devices like tables, SBCs etc.
It's also something we don't really want for SystemReady-IR
due to security concerns.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The new opt-out setting, CONFIG_ENV_MMC_PARTITION, statically sets
the MMC environment partition name. Prior to this patch, the only way
to declare this partition name was by creating a
'u-boot,mmc-env-partition' parameter in the device-tree's /config node.
This setting provides additional flexibility, particularly in cases
where accessing the device-tree is not straightforward (e.g. QEMU).
If undeclared, the device-tree's setting will be used.
Signed-off-by: Emmanuel Di Fede <emmanuel.difede@cysec.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
scmi_to_linux_errno() is set to return an appropriate errno
which corresponds to a given SCMI status code.
But the current implementation always returns the same value.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
memalign() returns a pointer which is to be freed by free(). To call
unmap_sysmem() is incorrect, furthermore it was called in a wrong scope.
Also add a check for allocation error.
Fixes: d7af2baa49 ("crypto/fsl: Fix HW accelerated hash commands")
Cc: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Without CONFIG_CLK, the build fails with the following message:
LD u-boot
aarch64-none-linux-gnu-ld.bfd: drivers/firmware/scmi/scmi_agent-uclass.o: \
in function `scmi_bind_protocols':
.../drivers/firmware/scmi/scmi_agent-uclass.c:79: undefined reference to \
`_u_boot_list_2_driver_2_scmi_clock'
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
use new memory layout and change uboot load address.
open tpm, tee and more config feature
No need to reserve top memory because the reserved space
is moved to the bottom area of memory.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
To quote the author:
This series provides a means to edit board configuration in U-Boot in a
graphical manner. It supports multiple menu items and allows moving
between them and selecting items. The configuration is defined in a data
format so that code is not needed in most cases. This allows the board
configuration to be provided in the devicetree.
This is still at an early stage, since it only supports menus. Numeric
values are not supported. Most importantly it does not yet support
loading or saving the configuration selected by the user.
To try it out you can use something like:
./tools/expo.py -e test/boot/files/expo_layout.dts \
-l test/boot/files/expo_layout.dts -o cedit.dtb
./u-boot -Tl -c "cedit load hostfs - cedit.dtb; cedit run"
Use the arrow keys to move between menus, enter to open a menu, escape
to exit.
Various minor fixes and improvements are provided in this series:
- Update STB TrueType library to latest
- Support clearing part of the video display
- Support multiple livetrees loaded at runtime
- Support loading and allocating a file
- Support proper measuring of text in expo
- Support simple themes for expo
This was brought in in 2016 and a number of changes have been made since
then. There does not seem to be much change in functionality, but it is
a good idea to update from time to time.
Bring in the latest version:
5736b15 ("re-add perlin noise again")
Add a few necessary functions, with dummies in some cases. Update the tests
as there are subtle changes in rendering, perhaps not for the better.
Signed-off-by: Simon Glass <sjg@chromium.org>