Commit graph

57558 commits

Author SHA1 Message Date
Marcel Ziswiler
7ce134b7c3 board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support
This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB
IT V1.0B module. Unlike the V1.0A early access samples exclusively
booting from SD card, they are now strapped to boot from eFuses which
are factory fused to properly boot from their on-module eMMC. U-Boot
supports either booting from the on-module eMMC or may be used for
recovery purpose using the universal update utility (uuu) aka mfgtools
3.0.

Functionality wise the following is known to be working:
- eMMC and MMC/SD card
- Ethernet
- GPIOs
- I2C

Unfortunately, there is no USB functionality for the i.MX 8QXP as of
yet.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-11 10:42:48 +02:00
Marcel Ziswiler
4c45e43a2a imx: fix building for i.mx8 without spl
Building with Travis CI complained and stopped with the following error:
+cc1: fatal error: opening output file spl/u-boot-spl.cfgout: No such
file or directory
+compilation terminated.

This fixes commit caceb739ea ("imx: build flash.bin for i.MX8") which
took SPL being enabled on i.MX8 for granted.

Reported-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-06-11 10:42:48 +02:00
Adam Ford
a9bcf937c9 ARM: imx6logic: Stop overwriting fdt_file if manually set
The board file uses the processor type to determine what dtb file
is set.  Unfortunately, if the user wants to manually set this,
it get gets overwritten upon boot.  This patch adds a check to
see if the value is already set and only changes it if the value
is empty.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-11 10:42:48 +02:00
Tom Rini
6d277fb0ed spl: Correct SPL_SIZE_LIMIT Kconfig option
When introduced this limit was an int but was then changed to hex
without noting as much in the prompt nor changing existing users.  Put
this back to an int.

Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Fixes: 2577015dc5 ("spl: add overall SPL size check")
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-08 07:49:00 -04:00
Tom Rini
a56149dd97 Merge branch '2019-06-07-master-imports'
- Include Heinrich's series to move the i.MX board size check function
  to be more widely available.
- Include Simon Goldschmidt's patch to make it possible to have a more
  accurate SPL size check applied.
2019-06-07 18:03:18 -04:00
Simon Goldschmidt
2577015dc5 spl: add overall SPL size check
This adds a size check for SPL that can dynamically check generated
SPL binaries (including devicetree) for a size limit that ensures
this image plus global data, heap and stack fit in initial SRAM.

Since some of these sizes are not available to make, a new host tool
'spl_size_limit' is added that dumps the resulting maximum size for
an SPL binary to stdout. This tool is used in toplevel Makefile to
implement the size check on SPL binaries.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-06-07 11:03:39 -04:00
Heinrich Schuchardt
dfe252b11e configs: rk3288: Tinker Board SPL file must fit into 32 KiB
The SPL image for the Tinker Board has to fit into 32 KiB. This includes
up to 2 KiB for the file header.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-07 11:03:39 -04:00
Heinrich Schuchardt
0a0f23142f configs: define CONFIG_SPL_SIZE_LIMIT
A new configuration variable CONFIG_SPL_SIZE_LIMIT is introduced to define
the board specific maximum size for the SPL file.

Use Makefile function size_check() to implement the test.

Depending on the size of CONFIG_SPL_SIZE_LIMIT an error like the following
is thrown:

spl/u-boot-spl.bin exceeds file size limit:
  limit:  30720 bytes
  actual: 33426 bytes
  excess: 2706 bytes
make: *** [Makefile:1663: spl/u-boot-spl.bin] Error 1

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-07 11:03:39 -04:00
Heinrich Schuchardt
219dee7e38 imx: move BOARD_SIZE_CHECK to main Makefile
We currently have duplicate definitions for BOARD_SIZE_CHECK in Makefile
and arch/arm/mach-imx/Makefile.

Move the board size check from arch/arm/mach-imx/Makefile to Makefile.

Depending on the value of CONFIG_BOARD_SIZE_LIMIT an error like an error
like the following is thrown:

u-boot-dtb.imx exceeds file size limit:
  limit:  503696 bytes
  actual: 509720 bytes
  excess: 6024 bytes
make: *** [Makefile:1051: u-boot-dtb.imx] Error 1

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-07 11:03:39 -04:00
Heinrich Schuchardt
b275030e50 Makefile: reusable function for BOARD_SIZE_CHECK
Carve out function size_check from macro BOARD_SIZE_CHECK. This will allow
us to reuse the function for other file size checks.

Depending on the value of CONFIG_BOARD_SIZE_LIMIT an error like the
following is thrown:

u-boot-dtb.img exceeds file size limit:
  limit:  409516 bytes
  actual: 444346 bytes
  excess: 34830 bytes
make: *** [Makefile:1212: u-boot-dtb.img] Error 1

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-07 11:03:39 -04:00
Heinrich Schuchardt
3bad256f5b lib/vsprintf: allow printing upper case GUIDs
In the UEFI context GUIDs are expected to be rendered in upper case.

The patch uses the formerly unused bit 1 of the parameter str_format
of function uuid_bin_to_str() to indicate if we need upper or lower case
output.

Function uuid_string() in vsprint.c is adjusted to correctly set the bit
depending on the print format code.

%pUb: 01020304-0506-0708-090a-0b0c0d0e0f10
%pUB: 01020304-0506-0708-090A-0B0C0D0E0F10
%pUl: 04030201-0605-0807-090a-0b0c0d0e0f10
%pUL: 04030201-0605-0807-090A-0B0C0D0E0F10

Up to this point only a diagnostic message in mount_ubifs() using '%pUB' is
concerned by the change. Further patches are needed to adjust the UEFI
subsystem.

A unit test is provided inside the ut_print command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-07 10:52:30 -04:00
Tom Rini
dbbb1c43f2 Pull request for UEFI sub-system for v2019.07-rc4-2
Support for managing the non-volatile attribute of UEFI variables
 is added though we do not have a backend for persistence yet.
 
 Error messages for changes of UEFI variables are provided.
 
 UEFI boottime service implementations are corrected.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAlz3mYcACgkQxIHbvCwF
 GsTNgw/8DSxiFXvOF6eTWd2POYfu9wjZXCcMtpsfuLA3b58AjF0VfYhoXgQoel1B
 BnP6wzaIajIM8yafvia38EBloa2ZkBPjqUD/dtvs/hYe9x9kMCqLpsbOgHmjKF4b
 X6w4j4OOvOaEuKnsi6faWmXfsOWA5laYz6/u1Ewau+0P5SMnt/0piVMqkLofFO1i
 TcUzzn8MyfuCOu6UH+nqMZMguPaLkiCZX+aS6Q6tDfd5wfVRDtGTMGrMO/X42tLB
 vqAgW6qRV8U4H08gBx8u2+xiO67soiH+7AVuhc+/6inMCPyAXBwVlr79YihNi75o
 FOftPJ3hcJ+YkLNSVpwayKzrPa9GCCB2PGVDPCWQMwejIgQMkLPq2xRbFCPmLC4N
 WM4E11lqLSDL4xUTqhn+bJfRofaIpV9t79VVNAOkwHD7Wj0mnOVWjnpY+bB3n3hN
 LAneXPiUoQXSy9d3F2dd6J3emQMSTK4TPchGwWyfFwTe8VszynvHbWU8AGyCjbop
 /XAlBHYfuTLjvB+j8WLfua7ocmMtvIAU3CLC8OJ6bvga/VIPtG17rGAiQ1RP9W0u
 JZ4QKOnU2M8NiOrq45GIQEUV/UocNDJ2g5fZshLIzNk1it90RFEQ7kR6WYZZg4Hq
 zHSVjKijqxUcqKfQbSukJInDYI8xS1F+jKgB3HdGCg49ZZb/y74=
 =mCc9
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc4-2' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc4-2

Support for managing the non-volatile attribute of UEFI variables
is added though we do not have a backend for persistence yet.

Error messages for changes of UEFI variables are provided.

UEFI boottime service implementations are corrected.
2019-06-05 15:53:18 -04:00
Tom Rini
2253e40cae Merge branch '2019-06-05-master-imports'
- More DaVinci fixes
- BuR platform fix
2019-06-05 15:49:09 -04:00
Heiko Schocher
ea41b15617 cmd/led: check subcommand "list" instead "l"
current implementation for checking if "led list"
command is called checks only if "l" is passed to the
led command. This prevents switching leds with name
which starts also with a "l". So check for passing
"list".

While at it, also fix a typo in led command usage.

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-06-05 12:14:02 -04:00
Jean-Jacques Hiblot
c5646270d1 board: am335x/mux: configure the pins for 8-bit data transfer on MMC1
This is required for proper operation of the 8-bit data transfers.
This fixes transient errors seen on BeagleBone Black.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-06-05 12:14:02 -04:00
Holger Brunck
072d1528fa board/km: update maintainer e-mail
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
2019-06-05 12:14:02 -04:00
Bartosz Golaszewski
1f12208c6a arm: davinci: remove leftover assembly
There are no more users of lowlevel_init.S. Remove the file.

Suggested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-06-05 12:14:02 -04:00
David Lechner
18517ab8a1 configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT
This adds a define for CONFIG_SKIP_LOWLEVEL_INIT in the legoev3 config.
On the EV3, U-Boot is loaded into RAM by another bootloader, so we
don't need the lowlevel init in U-Boot.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-06-05 12:14:02 -04:00
Adam Ford
4fde31e482 ARM: da850evm: Fix reading MAC from SPI
The MAC address is located at at the last 64K of SPI Flash, and
it's 6 bytes long.  This patch corrects both the length and
starting byte of the MAC address.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-05 12:14:02 -04:00
Adam Ford
33ac2b560b arm: omap3: Manually initialize GPIO if OF_CONTROL doesn't
The commong initialization code manually initializes the GPIO
even when OF_CONTROL does it, so we can reduce the code size a
bit by not doing it manually when we have device tree support.

Using the omap3_logic board (dm3730), the sizes shrunk:

Before:

   text	   data	    bss	    dec	    hex	filename
 561066	  28596	 116880	 706542	  ac7ee	u-boot
  55245	   1605	   1888	  58738	   e572	spl/u-boot-spl

After
  text	   data	    bss	    dec	    hex	filename
 560898	  28548	 116872	 706318	  ac70e	u-boot
  55121	   1557	   1888	  58566	   e4c6	spl/u-boot-spl

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-05 12:14:02 -04:00
Adam Ford
e3b7ff2476 ARM: DTS: imx6q-logicpd: Resync with Linux 5.1
Resync imx6q-logicpd with Kernel 5.1.5

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-05 12:14:02 -04:00
Adam Ford
b4d070fb5a ARM: davinci: Remove ipam390 linker script from Kconfig
With ipam390 support removed in we can remove the reference to the
linker script since that case will never be true.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-06-05 12:14:02 -04:00
Sekhar Nori
2a766db938 ARM: davinci: SPL: fix BSS initialization
U-Boot README recommends initializing SDRAM in board_init_f(). DA850
was doing it as part of board_init_r() (through call to spl_board_init()
which calls arch_cpu_init() which calls da850_ddr_setup())

This worked fine till commit 15b8c75058 ("davinci:
da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full") moved
BSS to SDRAM.

Functions like mmc_initialize() called in board_init_r() assume BSS is
available. Since SDRAM was not initialized when arch/arm/lib/crt0.S tried
to initialize BSS to 0, BSS is not initialized correctly.

Fix this by simply calling arch_cpu_init() from board_init_f(). Also move
preloader_console_init() there to help debug issues with board_init_r().

With this spl_board_init() is no longer needed, we remove it.

Tested using MMC/SD boot on OMAP-L138 LCDK board.

Tested-by: Adam Ford <aford173@gmail.com> #da850evm
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Peter Howard <phoward@gme.net.au> #omapl138_lcdk
2019-06-05 12:14:02 -04:00
Sekhar Nori
4fddaf2b7d ARM: davinci: omal138_lcdk: fix MMC boot breakage due to driver model conversion
commit 21af33ed03 ("ARM: davinci: omapl138_lcdk: Enable DM_MMC")
wanted to enable DM_MMC only for U-Boot and not for SPL.

But CONFIG_DM_MMC is defined for SPL build too. Because of this
MMC device was not getting registered for SPL causing MMC/SD
boot breakage.

Instead use CONFIG_IS_ENABLED(DM_MMC) which will remain false until
CONFIG_SPL_DM_MMC is defined.

Tested-by: Adam Ford <aford173@gmail.com> #da850evm
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Peter Howard <phoward@gme.net.au> #omapl138_lcdk
2019-06-05 12:13:46 -04:00
Hannes Schmelzer
7a56c930e2 board/BuR/common: fix detection for PSC/STM resetcontroller
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-06-05 12:13:46 -04:00
Tom Rini
6d93d245c1 Merge git://git.denx.de/u-boot-riscv
- Support Microchip MPFS Icicle board.
- Enable e1000 and nvme support for qemu.
- Enable PCI host ECAM generic driver for qemu.
- Increase the environment size to 128kB for qemu.
2019-06-05 10:07:31 -04:00
Padmarao Begari
39494822e3 riscv: Add Microchip MPFS Icicle board support
This patch adds Microchip MPFS Icicle board support.
For now, NS16550 serial driver is only enabled.
The Microchip MPFS Icicle defconfig by default builds
U-Boot for M-Mode with SMP support.

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-06-05 13:19:24 +08:00
Bin Meng
e64db0d92e riscv: qemu: Enable e1000 and nvme support
Since we have added the PCI support to the 'virt' target, enable
e1000 and NVME as alternate network and storage devices for these
virtio based devices.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-06-05 13:19:15 +08:00
Bin Meng
cd6b6199ea riscv: qemu: Enable PCI host ECAM generic driver
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host.
Enable the driver for it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-06-05 13:19:15 +08:00
Karsten Merker
eacf07e631 riscv: increase the environment size for the qemu-riscv platform to 128kB
The existing default size of 4kB is too small as the default environment
has already nearly that size and defining a single additional environment
variable can exceed the available space.

Signed-off-by: Karsten Merker <merker@debian.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-06-05 13:19:08 +08:00
AKASHI Takahiro
4b27a76132 cmd: env: add -nv option for UEFI non-volatile variable
With this option, -nv, at "setenv -e" command, a variable will be defined
as non-volatile.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 23:56:14 +02:00
AKASHI Takahiro
f658c2e190 cmd: efidebug: make some boot variables non-volatile
Boot####, BootOrder and BootNext should be non-volatile.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 23:56:14 +02:00
AKASHI Takahiro
366161cf97 efi_loader: bootmgr: make BootNext non-volatile
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 23:56:14 +02:00
AKASHI Takahiro
cee2cbc731 efi_loader: variable: support non-volatile attribute
The attribute, EFI_VARIABLE_NON_VOLATILE, should be encoded as "nv" flag
in U-Boot variable if specified.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 23:56:14 +02:00
Heinrich Schuchardt
e80474ad39 efi_loader: notify memory map changes
When the memory map is changed signal events of the
EFI_EVENT_GROUP_MEMORY_MAP_CHANGE event group.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:38 +02:00
AKASHI Takahiro
8190b4a3e0 cmd: env: print a message when setting UEFI variable failed
Error message will alert a user that setting/deleting a variable failed.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:26 +02:00
AKASHI Takahiro
94e6e55053 efi_loader: bootmgr: print a message when loading from BootNext failed
If a user defines BootNext but not BootOrder and loading from BootNext
fails, you will see only a message like this:
	BootOrder not defined

This may confuse a user. Adding an error message will be helpful.

An example output looks like this:

=> efidebug boot add 0001 label1 scsi 0:1 "\path1\file1.efi" "--option foo"
=> efidebug boot add 0002 label2 scsi 0:1 "\path2\file2.efi" "--option bar"
=> efidebug boot add 0003 label3 scsi 0:1 "\path3\file3.efi" "--option no"
=> efidebug boot order 0001 0002
=> efidebug boot next 0003
=> bootefi bootmgr
Loading from Boot0003 'label3' failed
Loading from BootNext failed, falling back to BootOrder
Loading from Boot0001 'label1' failed
Loading from Boot0002 'label2' failed
EFI boot manager: Cannot load any image

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Adjust messages.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:26 +02:00
Heinrich Schuchardt
120ff7ba68 efi_loader: close protocols in UnloadImage()
When UnloadImage() is called all protocols opened by the image have to be
closed.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:26 +02:00
Heinrich Schuchardt
25e6fb5e93 efi_loader: fix EnableCursor()
The EnableCursor() service of the simple text output protocol must update
the the CursorVisible field of the output mode.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:26 +02:00
Heinrich Schuchardt
22f23db428 efi_loader: check timer events in Stall()
During a call to Stall() we should periodically check for timer events.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:26 +02:00
Heinrich Schuchardt
6a853dbcc0 lib: time: export usec_to_tick()
In the UEFI Stall() boottime service we need access to usec_to_tick().

Export the function.

Remove redundant implementation in arch/arm/mach-rockchip/rk_timer.c.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:26 +02:00
Heinrich Schuchardt
66ca24a9a0 efi_loader: DisconnectController() with no driver
If DisconnectController() is called and no driver is managing
ControllerHandle, return EFI_SUCCESS.

UEFI SCT II 2017, 3.3.12 DisconnectController(), 5.1.3.12.4 - 5.1.3.12.6

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:26 +02:00
Tom Rini
b1ab892740 Merge git://git.denx.de/u-boot-marvell
- Enable MMC in SPL to enable DM MMC booting on helios4 (Dennis)
2019-06-04 08:03:41 -04:00
Dennis Gilmore
7505075dff arm: mvebu: helios4: add MMC to SPL DT
This allows SPL to load the main U-Boot image from MMC once DM_MMC is
enabled.

Signed-off-by: Dennis Gilmore <dennis@ausil.us>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-04 08:33:24 +02:00
Tom Rini
38c2a8a001 Pull request for UEFI sub-system for v2019.07-rc4
Corrections for boottime services for protocols and for the SetTime()
 service are provided.
 
 Error messages for the 'setenv -e' and 'bootefi bootmgr' commands are
 added.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAlzziRQACgkQxIHbvCwF
 GsRFwA/9HJejIxx8TjMBAixuV0QRpvNlSqT4UNruDxDn1+UELDLzXAm2hinY07lR
 l58ztrzcFx6dUcTWR13P7vVItaGKoIyDTHKfdKbdtUC5OQzApu9/Crb5/+NPf2cS
 bxuFVEtrgvdJ9HdtF5SxTevnJK8MXnb8ho8QmYr+rPC5AMAOPWBnMMiWuS330TAW
 znxiWN+Hiy1q9+0peAHRcvTl0gheRrEUHqdluKdLOEwdJul3XjQlvOG87QAcuTOx
 +Y6VPDl91E6WKIofILDMfCBLVVsEw5ruoW2e1Vo23UxtIkTkDtop0qe46wBAzsJe
 blEFtvOXaAPikuL9x2aGO2nwk2q87tRzbS5pEGWspWW/PX72k94Vgw4R9NXj9Wpp
 UPpG4BK2Eu1YohomHa/zmaJPdRUYg2cP34N1YAbLrEX9Ro7Nhmf+cBgckbR+GRuF
 C95hBCzRNYpPV9BRHZlLG58yiTN/OUcTRSA87dENycA9WFqI8LRlLfkn8BYBwUwO
 KhFMLOjUViYvu+t+HcqBSQWwLN7Iw0F8lOfRQkJ1EFym29QNpWH6HjykAKN3SwUn
 b+r2ZDBwtwqGxZfUcaJHjc1ZPtzYEF7F3csrnicO5F+nN0oQvd8zBSHylDbvwAzd
 L392XREU4gB5Z/qxPjRFZdlVRgRmE36bNc7jcezT/qeD7Cl7z9I=
 =A8+f
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc4' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc4

Corrections for boottime services for protocols and for the SetTime()
service are provided.

Error messages for the 'setenv -e' and 'bootefi bootmgr' commands are
added.
2019-06-02 18:19:45 -04:00
Tom Rini
55cae6458d Merge branch 'master' of git://git.denx.de/u-boot-net
- Basic bug fixes and minor features for 2019.07.
2019-06-02 08:33:10 -04:00
Heinrich Schuchardt
7950e8e2eb efi_selftest: unit test for OpenProtocolInformation()
Provide a unit test that checks that the open protocol information is
correctly updated when opening and closing protocols.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01 22:40:24 +02:00
Heinrich Schuchardt
7e572cf69d efi_loader: CloseProtocol() fix open protocol information
CloseProtocol() must delete all open protocol information records relating
to import parameters not only one.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01 22:40:24 +02:00
Heinrich Schuchardt
b4863baa68 efi_loader: open protocol information
When a protocol is opened the open protocol information must be updated.
The key fields of the open protocol information records are ImageHandle,
ControllerHandle, and Attributes.

Consider the Attributes field when determining if an open protocol
information record has to be updated or a new one has to be created.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01 22:40:23 +02:00
Heinrich Schuchardt
755d42d420 efi_loader: correct HandleProtocol()
The UEFI specification requires that when a protocol is opened via
HandleProtocol() the agent handle is the image handle of the EFI firmware
(see chapter on EFI_BOOT_SERVICES.OpenProtocol()).

Let efi_handle_protocol() pass efi_root as agent handle to
efi_open_protocol().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01 22:40:23 +02:00