Commit graph

13 commits

Author SHA1 Message Date
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Tim Harvey
385575bcb6 imx: ventana: add GW553x support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:12 +02:00
Tim Harvey
ca628b74c9 imx: ventana: gsc: show board temp on boot
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:46 +02:00
Tim Harvey
82a17e75da imx: ventana: gsc: fix negative temperature readings
The GSC Temperature sensor is a 2's complement value - adjust accordingly
for negative temperatures.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:30 +02:00
Tim Harvey
efa7ed7236 imx: ventana: gsc: add gsc sleep command
The Gateworks System Controller on Ventana boards has the ability to
disable the board's primary power supply until the RTC hits a specific
time. When sleeping a button-down event on the GSC user pushbutton will
wake the board before it's wake time has been reached. This feature is
referred to as GSC sleep.

Add a command to invoke sleep mode for a specified number of seconds.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:15 +02:00
Tim Harvey
a419352daf imx: ventana: gsc: remove dependence on env
remove dependence on getenv() by using global board info struct for model.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Tim Harvey
2d833c8528 imx: ventana: move GSC boot watchdog disable function to gsc.c
Move the code that disables the GSC boot watchdog into gsc.c

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
ee5931d488 imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog
This adds information about the Gateworks System Controller to the gsc command
such as the firmware version, firmware CRC and status of the GSC watchdog
(if its enabled and if its tripped).

Additionally the 'gsc wd' command can be used to enable or disable the
watchdog with the following usage:
 gsc wd enable [30|60]
 gsc wd disable

Note that the GSC registers are battery-backed by the GSC coincell so once
eanbled, they remain enabled across power-cycles or until either the GSC
firmware has been updated or FLASH has been re-programmed by the Gateworks
JTAG adapter.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00
Tim Harvey
45af3f74bc imx: ventana: gsc: add new hwmon rails
Add a new voltage rail added in various -C revision PCB's.

Additionally make VDD_CORE, VDD_SOC, and VDD_IO2 common as all Ventana boards
have those.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:10 +02:00
Tim Harvey
16e369f5ec imx: ventana: remove GSC hwmon voltage rail min/max test
The min/max of each depends not only on board but on CPU. Simplify by removing
this rarely needed and difficult to maintain feature and just display the
rails and their values.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:10 +02:00
Tim Harvey
3aa226740f imx: ventana: add GW5520 support
The GW5520 has an IMX6Q SoC with 512MB of DDR3, 256MB of NAND flash as well as:
 * 2x MiniPCIe sockets
 * 2x USB host sockets
 * 2x i210 GigE
 * HDMI out
 * digital I/O expansion

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 15:13:25 +02:00
Tim Harvey
e5131d53bf imx: ventana: add appropriate delay following GSC i2c write
The Gateworks System Controller EEPROM config is flash based. Add a delay
following writes to avoid errors on back-to-back writes.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:53:50 +02:00
Tim Harvey
59189a8b26 ventana: Add Gateworks Ventana family support
Gateworks Ventana is a product family based on the i.MX6.  This
patch adds support for all boards in the Ventana family. Where
possible, data from the boards EEPROM is used to determine various
details about the board at runtime.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-03-12 10:23:03 +01:00