Commit graph

75 commits

Author SHA1 Message Date
Mike Frysinger
45c48953e8 Blackfin: print out Flash: before checking it
If there is some problem in the flash init/checking code, it's nicer to see
the message "Flash:" before crashing.  This way the source of the problem
is a bit more straightforward.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-23 15:14:53 -04:00
Mike Frysinger
1c7a79a04e Blackfin: safely flush data caches when in writeback mode
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-23 15:14:53 -04:00
Mike Frysinger
8996d1608a Blackfin: unify net-related init code
Unify all of the net-related init code in the common Blackfin board init
code to clean up the ifdef mess a bit.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-23 15:14:52 -04:00
Mike Frysinger
500b6c51e4 Blackfin: bfin_mac: force boards to setup the MAC themselves
Since the on-chip MAC does not have an eeprom or similar interface, force
all Blackfin boards that use this driver to setup the board data with a
proper MAC.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-03-20 22:39:09 +01:00
Mike Frysinger
fc68f9f859 Blackfin: output booting source when booting
Knowing the booting source of the part is useful, especially when the part
can switch dynamically between sources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:27:16 -05:00
Mike Frysinger
961954ea0e Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
as usable with the source/destination addresses and the count size.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:24:46 -05:00
Mike Frysinger
e347c092a3 Blackfin: dma_memcpy(): fix random failures
We have to make sure the DMA channel is actually disabled in hardware before
attempting to reprogram it.  Otherwise the new settings are ignored and we
end up with random hangs/failures.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:24:46 -05:00
Mike Frysinger
fdce83c108 Blackfin: rewrite cache handling functions
Take the cache flush functions from the kernel as they use hardware loops in
order to get optimal performance.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:24:44 -05:00
Mike Frysinger
84c5f0dc47 Blackfin: setup bi_enetaddr for single nets
For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
based on $ethaddr, so set it up.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:24:43 -05:00
Mike Frysinger
40599239e7 Blackfin: cache core/system clock values
Calculating the clocks requires a bit of calls to gcc math functions, so
cache the values after the first run since they'll most likely never
change once U-Boot is up and running.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:24:42 -05:00
Mike Frysinger
7a1e87b106 Blackfin: only build post code when CONFIG_POST
Save some time by using CONFIG_POST in the Makefile rather than C files.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:24:30 -05:00
Mike Frysinger
fe033ad6d0 Blackfin: fixup misc warnings such as printf's and missing casts
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:27:28 -05:00
Mike Frysinger
b1e9435b64 Blackfin: pass RETX to Linux
Make sure we save the value of RETX at power on and then pass it on to the
kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:15 -05:00
Mike Frysinger
b6edc719a1 Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
128kB when setting up the default flash protection region for U-Boot
itself.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:12 -05:00
Mike Frysinger
78a0ba7dc2 Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
When setting up the global data, rather than relying on sizeof(), use the
common CONFIG_SYS_GBL_DATA_SIZE define.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:12 -05:00
Mike Frysinger
01815c2d06 Blackfin: implement general support for CONFIG_STATUS_LED
Here are the Blackfin-specific and board-independent pieces for status leds.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:12 -05:00
Mike Frysinger
6882b5a79a Blackfin: do not init i2c in Blackfin board init
The common code takes care of calling i2c_init() when needed, so no point
in us doing it as well.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:12 -05:00
Mike Frysinger
05b75e4883 Blackfin: fix dcache handling when doing dma memcpy's
Our dcache invalidate function doesn't just invalidate, it also flushes.
So rename the function accordingly and fix the dma_memcpy() function so it
doesn't inadvertently corrupt the data destination.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:12 -05:00
Mike Frysinger
21d6313604 Blackfin: split cache handling out of dma_memcpy()
Creating a new dma_memcpy() function that skips all cache checks allows us
to use the function in very early init where the cache is not yet setup.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:10 -05:00
Mike Frysinger
d31eb38512 Blackfin: abort dma_memcpy() for L1 scratchpad
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:10 -05:00
Mike Frysinger
81b799add7 Blackfin: rename bootm.c to boot.c
The boot file contains functions for more than just "bootm", so rename it
accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:10 -05:00
Mike Frysinger
36cd52a007 Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:10 -05:00
Mike Frysinger
6dadc9195a Blackfin: use common strmhz() in system output
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-23 22:59:16 +01:00
Mike Frysinger
687f952e41 Blackfin: drop CONFIG_SPI handling in board init
The eeprom SPI init functions are duplicated as the common code already
executes these for us.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-07 03:00:06 -05:00
Peter Tyser
561858ee7d Update U-Boot's build timestamp on every compile
Use the GNU 'date' command to auto-generate a new U-Boot
timestamp on every compile.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-06 23:36:43 +01:00
Wolfgang Denk
4cc64742a8 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2008-11-01 15:59:35 +01:00
Kumar Gala
49c3a861d1 bootm: Add subcommands
Add the ability to break the steps of the bootm command into several
subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.

This allows us to do things like manipulate device trees before
they are passed to a booting kernel or setup memory for a secondary
core in multicore situations.

Not all OS types support all subcommands (currently only start, loados,
ramdisk, fdt, and go are supported).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-29 00:59:50 +01:00
Mike Frysinger
39782727e1 Blackfin: init NAND before relocating env
If booting out of NAND, we need to make sure we initialize it properly
before attempting to relocate the environment.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:50 -04:00
Mike Frysinger
0f9a881941 Blackfin: check cache bits, not cplb bits
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:50 -04:00
Mike Frysinger
50f0d21191 Blackfin: unify cache handling code
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:50 -04:00
Mike Frysinger
3c87989834 Blackfin: only initialize the RTC when actually used
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:50 -04:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
a3a08c0ced bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:09 +02:00
Jean-Christophe PLAGNIOL-VILLARD
bb1f8b4f8b rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 21:09:38 +02:00
Kumar Gala
40d7e99d37 bootm: refactor do_reset and os boot function args
There is no need for each OS specific function to call do_reset() we
can just do it once in bootm. This means its feasible on an error for
the OS boot function to return.

Also, remove passing in cmd_tbl_t as its not needed by the OS boot
functions.  flag isn't currently used but might be in the future so
we left it alone.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26 23:48:01 +02:00
Kumar Gala
c160a95447 bootm: refactor entry point code
Move entry point code out of each arch and into common code.
Keep the entry point in the bootm_headers_t images struct.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26 23:31:33 +02:00
Kumar Gala
3216ca9692 Fix fallout from autostart revert
The autostart revert caused a bit of duplicated code as well as
code that was using images->autostart that needs to get removed so
we can build again.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-12 00:06:34 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Marian Balakowicz
cb1c489690 Restore the ability to continue booting after legacy image overwrite
Before new uImage code was merged, bootm code allowed for the kernel image to
get overwritten during decompresion. new uImage introduced a check for image
overwrites and refused to boot the image that got overwritten. This patch
restores the old behavior. It also adds a warning when the image overwriten is
a multi-image file, because in such case accessing componentes other than the
first one will fail.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-04-17 23:59:05 -07:00
Mike Frysinger
d5bffeb868 Blackfin: cleanup and overhaul common board init functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-30 15:51:22 -04:00
Mike Frysinger
b86b3416f8 Blackfin: cleanup lib_blackfin/cache.c
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-30 15:50:30 -04:00
Mike Frysinger
9171fc8172 Blackfin: unify cpu and boot modes
All of the duplicated code for Blackfin processors and boot modes have been
unified.  After all, the core is the same for all processors, just the
peripheral set differs (which gets handled in the drivers).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-30 15:50:19 -04:00
Bartlomiej Sieka
27f33e9f45 Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing
Conflicts:

	common/cmd_bootm.c
	cpu/mpc8xx/cpu.c

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-26 09:38:06 +01:00
Mike Frysinger
5b22163fef Blackfin: add proper ELF markings to some assembly functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-15 22:14:57 -04:00
Mike Frysinger
f7ce12cb65 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
Stop tying things to the processor that should be tied to other defines and
change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
system to select the -mcpu option.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-15 22:14:14 -04:00
Marian Balakowicz
cd7c596e9f [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
This patch updates architecture specific implementations of
do_bootm_linux() adding new uImage format handling for
operations like get kernel entry point address, get kernel
image data start address.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:33:00 +01:00
Kumar Gala
75fa002c47 [new uImage] Respect autostart setting in linux bootm
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 13:15:56 +01:00
Marian Balakowicz
8a5ea3e616 [new uImage] Move image verify flag to bootm_headers structure
Do not pass image verification flag directly to related routines.
Simplify argument passing and move it to the bootm_header structure which
contains curently processed image specific data and is already being passed
on the argument list.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-27 11:01:04 +01:00
Marian Balakowicz
823afe7cef [Makefile] Sort COBJS in lib_<arch> Makefiles
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-27 11:00:47 +01:00
Marian Balakowicz
d5934ad775 [new uImage] Add dual format uImage support framework
This patch adds framework for dual format images. Format detection is added
and the bootm controll flow is updated to include cases for new FIT format
uImages.

When the legacy (image_header based) format is detected appropriate
legacy specific handling is invoked. For the new (FIT based) format uImages
dual boot framework has a minial support, that will only print out a
corresponding debug messages. Implementation of the FIT specific handling will
be added in following patches.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-25 15:53:49 +01:00