Commit graph

424 commits

Author SHA1 Message Date
Simon Glass
24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Tom Rini
9ef671c9d4 Merge branch 'master' of git://git.denx.de/u-boot-spi 2015-11-19 13:27:26 -05:00
Michal Simek
281f1566b8 dm: spi: Add support for all targets which requires MANUAL_RELOC
It is follow up patch based on
"dm: Add support for all targets which requires MANUAL_RELOC"
(sha1: 484fdf5ba0)
to update function pointers for DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19 13:10:16 +01:00
Thomas Chou
7313e21a1e altera_spi: change ioremap to map_physmem
Change ioremap() to map_physmem(), as it is more used in u-boot.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-18 21:18:30 +08:00
Vignesh R
857db48e5f spi: ti_qspi: Add dummy readl for bus sync
Add dummy readl after invalidating cmd field of QSPI_CMD_REG to ensure
bus sync. Without this device's CS is not deactivated reliably leading
to failure to enumerate flash or failure to set quad enable bit on
Macronix flash present on am437x-sk and am437x-idk evms.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-17 23:43:29 +05:30
Tom Warren
4e675ff244 Tegra: T210: Add QSPI driver
This is the normal Tegra SPI driver modified to work with the
QSPI controller in Tegra210. It does not do 2x/4x transfers
or any other QSPI protocol.

Signed-off-by: Yen Lin <yelin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-12 09:21:07 -07:00
Thomas Chou
ddf34c2606 spi: altera_spi: minor clean up
- Remove the penultimate comma in of_match ids

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-06 09:14:12 +08:00
Chin Liang See
4e609b6cb1 spi: cadence_qspi: Ensure check for max frequency in place
Ensure the intended SCLK frequency not exceeding the maximum
frequency. If that happen, SCLK will set to maximum frequency.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Vikas Manocha <vikas.manocha@st.com>
Cc: Jagannadh Teki <jteki@openedev.com>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
2015-11-05 02:34:15 +01:00
Chin Liang See
040f4ba742 spi: cadence_qspi: Fix fdt read of spi-max-frequency
Fix the fdt read for spi-max-frequency as it's contained
in the child node. Current state of code is always
returning default value.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Vikas Manocha <vikas.manocha@st.com>
Cc: Jagannadh Teki <jteki@openedev.com>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
2015-11-05 02:34:15 +01:00
Chin Liang See
98fbd71d7a spi: cadence_qspi: Ensure spi_calibration is run when sclk change
Ensuring spi_calibration is run when there is a change of sclk
frequency. This will ensure the qspi flash access works for high
sclk frequency

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Vikas Manocha <vikas.manocha@st.com>
Cc: Jagannadh Teki <jteki@openedev.com>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05 02:34:15 +01:00
Tom Rini
446d37c1ac Merge branch 'master' of git://git.denx.de/u-boot-spi 2015-10-28 16:56:43 -04:00
Jagan Teki
bef87adf95 spi: altera_spi: Minor cleanup
- Moved macro definitions to top
- Give tab space to CONFIG_ALTERA_SPI_IDLE_VAL value
- Re-arrange header includes ascending order

Acked-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-28 13:54:09 +05:30
Jagan Teki
9c63d44e92 spi: altera_spi: Use BIT macro
Replace numerical bit shift with BIT macro
in altera_spi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Marek Vasut <marex@denx.de>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-28 13:53:58 +05:30
Tom Rini
2431492aef Merge git://git.denx.de/u-boot-dm 2015-10-27 19:08:19 -04:00
Jagan Teki
d2436301c5 spi: xilinx_spi: Use GENMASK
Replace numeric mask hexcodes with GENMASK macro
in xilinx_spi

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:43 +05:30
Jagan Teki
76538ec648 spi: tegra: Use GENMASK
Replace numeric mask hexcodes with GENMASK macro
in tegra*.c

Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Warren <twarren@nvidia.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:43 +05:30
Jagan Teki
0ebc0ec620 spi: omap3_spi: Use GENMASK
Replace numeric mask hexcodes with GENMASK macro
in omap3_spi

Cc: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:43 +05:30
Jagan Teki
bad490a242 spi: fsl_qspi: Use GENMASK
Replace numeric mask hexcodes with GENMASK macro
in fsl_qspi

Cc: York Sun <yorksun@freescale.com>
Cc: Haikun Wang <Haikun.Wang@freescale.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:43 +05:30
Jagan Teki
95e77d904e spi: designware_spi: Use GENMASK
Replace numeric mask hexcodes with GENMASK macro
in designware_spi

Cc: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:43 +05:30
Jagan Teki
a9d3b78023 spi: atmel_spi: Use GENMASK
Replace numeric mask hexcodes with GENMASK macro
in atmel_spi

Cc: Bo Shen <voice.shen@atmel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:42 +05:30
Jagan Teki
5ea392d43b spi: xilinx_spi: Use BIT macro
Replace numerical bit shift with BIT macro
in xilinx_spi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:42 +05:30
Jagan Teki
847720c4e1 spi: ti_qspi: Use BIT macro
Replace numerical bit shift with BIT macro
in ti_qspi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Reviewed-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:33 +05:30
Jagan Teki
f692248f90 spi: tegra: Use BIT macro
Replace numerical bit shift with BIT macro
in tegra*.c

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Warren <twarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:28 +05:30
Jagan Teki
ccaa948501 spi: sh_qspi: Use BIT macro
Replace numerical bit shift with BIT macro
in sh_qspi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:28 +05:30
Jagan Teki
3e1b4dcf1c spi: omap3_spi: Use BIT macro
Replace numerical bit shift with BIT macro
in omap3_spi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:28 +05:30
Jagan Teki
a048d4bbb1 spi: mpc8xxx_spi: Use BIT macro
Replace numerical bit shift with BIT macro
in mpc8xxx_spi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:28 +05:30
Jagan Teki
69fd4c386c spi: ich: Use BIT macro
Replace numerical bit shift with BIT macro
in ich

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:21:16 +05:30
Jagan Teki
29e6abd94b spi: fsl: Use BIT macro
Replace numerical bit shift with BIT macro
in fsl_*spi.c

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: York Sun <yorksun@freescale.com>
Cc: Haikun Wang <Haikun.Wang@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:19:29 +05:30
Jagan Teki
431a9f0286 spi: designware_spi: Use BIT macro
Replace numerical bit shift with BIT macro
in designware_spi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:19:29 +05:30
Jagan Teki
b7e83b087c spi: cadence_qspi_apb: Use BIT macro
Replace numerical bit shift with BIT macro
in cadence_qspi_apb

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:19:29 +05:30
Jagan Teki
c0d1ea4acd spi: bfin_spi6xx: Use BIT macro
Replace numerical bit shift with BIT macro
in bfin_spi6xx

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:19:29 +05:30
Jagan Teki
a48c4eb6a7 spi: atmel_spi: Use BIT macro
Replace numerical bit shift with BIT macro
in atmel_spi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Bo Shen <voice.shen@atmel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:19:29 +05:30
Jagan Teki
9cf2ffb3c3 spi: zynq_[q]spi: Use GENMASK macro
GENMASK macro used on zynq_spi.c and zynq_qspi.c

GENMASK is used to create a contiguous bitmask([hi:lo]).
Ex: (0x7 << 3) => GENMASK(5, 3)

Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:19:15 +05:30
Jagan Teki
736b4df15d spi: zynq_[q]spi: Use BIT macro
Used BIT macro on zynq_spi.c and zynq_qspi.c

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-27 23:18:48 +05:30
Jagan Teki
e5e0d68f27 spi: zynq_qspi: Minor cleanups
- Use __func__ on debug
- Removed unnecessary comment
- Fix function name in debug as zynq_qspi_xfer instead of spi_xfer

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:03 +05:30
Jagan Teki
86e99b9861 spi: zynq_spi: Remove unneeded headers
- Removed unneeded inclusion of header files
- Add "Xilinx" on license text

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:03 +05:30
Jagan Teki
2775e91835 spi: zynq_qspi: Fix to configure CPOL, CPHA mask
priv->mode is initialized when .set_speed triggers
with mode value, so checking mode for configuring
CPOL, CPHA using priv->mode is invalid hence use
mode from .set_speed argument, and at the end
priv->mode will initialized with mode.

This patch also replaces formatting string to use
speed instead of mode in .set_speed ops.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:03 +05:30
Jagan Teki
191269987c spi: zynq_spi: Store cs value into private data
Store cs value into private data and use it while activating
chipselect instead of passing through function.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:02 +05:30
Jagan Teki
dda6241a1d spi: zynq_spi: Rename baudrate divisor mask name
Rename ZYNQ_SPI_CR_BRD_MASK to ZYNQ_SPI_CR_BAUD_MASK
for more readable.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:02 +05:30
Jagan Teki
46ab8a6a13 spi: zynq_spi: Add config reg shift named macros
Update the numerical values for baudrate and chipselect
with config reg shift named macro's

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:02 +05:30
Jagan Teki
78a025ace8 spi: Kconfig: Add Zynq QSPI controller entry
Add Zynq QSPI controller Kconfig entry.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-10-25 20:17:02 +05:30
Jagan Teki
46d0a9913c spi: Add zynq qspi controller driver
Added zynq qspi controller driver for Xilinx Zynq APSOC,
this driver is driver-model driven with devicetree support.

=> sf probe
SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
=> mw.b 0x100 0xCC 0x1000000
=> sf update 0x100 0x0 0x1000000
device 0 whole chip
16777216 bytes written, 0 bytes skipped in 59.842s, speed 289262 B/s
=> sf read 0x3000000 0x0 0x1000000
device 0 whole chip
SF: 16777216 bytes @ 0x0 Read: OK
=> cmp.b 0x3000000 0x100 0x1000000
Total of 16777216 byte(s) were the same

Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:01 +05:30
Simon Glass
bcbe3d1579 dm: Rename dev_get_parentdata() to dev_get_parent_priv()
The current name is inconsistent with other driver model data access
functions. Rename it and fix up all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-23 09:42:28 -06:00
Thomas Chou
15a56f9cb7 spi : convert altera_spi to driver model
Convert altera_spi to driver model

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-10-23 07:36:56 +08:00
George McCollister
5ac98cb9bd x86: spi: Add support for Wildcat Point
Add the Wildcat Point ID so Broadwell U based boards can use SPI.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:27 -06:00
Mirza Krak
5cb1b7b395 spi: tegra20: Add support for mode selection
Respect the mode passed in set_mode ops.

Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-10-11 16:43:06 +05:30
Jagan Teki
a22bba81e4 spi: zynq_spi: Fix to configure CPOL, CPHA mask
priv->mode is initialized when .set_speed triggers
with mode value, so checking mode for configuring
CPOL, CPHA using priv->mode is invalid hence use
mode from .set_speed argument, and at the end
priv->mode will initialized with mode.

This patch also replaces formatting string to use
speed instead of mode in .set_speed ops.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-11 16:43:06 +05:30
Jagan Teki
d5f60737db spi: xilinx_spi: Fix to configure CPOL, CPHA mask
priv->mode is initialized when .set_speed triggers
with mode value, so checking mode for configuring
CPOL, CPHA using priv->mode is invalid hence use
mode from .set_speed argument, and at the end
priv->mode will initialized with mode.

This patch also replaces formatting string to use
speed instead of mode in .set_speed ops.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-11 16:43:06 +05:30
Heiko Schocher
92a3188d7d bitops: introduce BIT() definition
introduce BIT() definition, used in at91_udc gadget
driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
[remove all other occurrences of BIT(x) definition]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
2015-09-11 17:15:32 -04:00
Simon Glass
cf92e05c01 Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header
Now that we have a new header file for cache-aligned allocation, we should
move the stack-based allocation macro there also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-11 17:15:20 -04:00