Commit graph

12847 commits

Author SHA1 Message Date
Tom Rini
be79009f3b Fixes for 2020.07
-----------------
 
 - mx53: mx53menlo Convert to DM_ETH, fix fail boot
 - imx8mp_evk: fix boot issue
 - MX6, display5: fix environment
 - drop warnings (watchdog) for i.MX8mm i.mx8mp
 - enable bootaux for i.MX8M
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXt+Grw8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aLCQCeK7NCaFMWpTtGSwYVDnl5PVCodqkAn2XuBkdu
 NCxgw1UqknHk3GaY0s9u
 =mUxD
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200609' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2020.07
-----------------

- mx53: mx53menlo Convert to DM_ETH, fix fail boot
- imx8mp_evk: fix boot issue
- MX6, display5: fix environment
- drop warnings (watchdog) for i.MX8mm i.mx8mp
- enable bootaux for i.MX8M

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
2020-06-09 09:17:24 -04:00
Stefano Babic
3854296801 Revert "imx: rom api: fix image offset computation"
This reverts commit 1f63ee6566.

As reported by Ye Li on ML:

1. Removing the image_offset will break secondary (redundant) boot support for sd and emmc.
2. When booting from emmc boot partition, the image_offset is 0. But the flash.bin
generated by mkimage with imximage-8mp-lpddr4.cfg is for sd. It expects to be burn at 32KB offset.
The fit offset 0x60000 has already included the 32KB offset.  So when you burn this flash.bin
to emmc boot partition at offset 0, the fit offset should subtract the 32KB (0x60000 - 0x8000).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-06-09 11:19:55 +02:00
Marek Vasut
a13644c065 ARM: dts: imx: m53menlo: Convert to DM_ETH
Convert the board to DM_ETH instead of legacy networking. This requires
a minor addition to the DT to satisfy the requirement for specifying a
PHY node. No functional change from board user perspective.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-06-08 10:43:02 +02:00
Marek Vasut
0e06d63d19 ARM: imx: ddr: Add missing PHY reset
The iMX7D RM 9.2.4.9.3 Power removal flow Table 9-11. Re-enabling power
explicitly says both the DDR controller and the PHY must be reset in the
correct sequence. Currently the code only resets the controller. This
leads to a misbehavior where the system brings the DRAM up after reboot,
but the DRAM is unstable. Add the missing reset.

The easiest way to trigger this is by triggering WDT without having the
WDT assert WDOG_B signal, i.e. mw.w 0x30280000 0x25 .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2020-06-08 10:42:54 +02:00
Sébastien Szymanski
1f63ee6566 imx: rom api: fix image offset computation
When not booting from FlexSPI, the offset computation is:

offset = image_offset + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000;

When booting from SD card or eMMC user partition, image_offset is
0x8000. It is useless to add and remove 0x8000.
When booting from other device, image_offset is 0 so this computation is wrong.

Simplfy this computation to work on all booting devices.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2020-06-08 10:42:14 +02:00
Patrick Wildt
0e9c045b2b imx: move ATF to the back of the FIT to fix loading over yModem
With yModem the FIT Image is only supplied once, so we can only
seek forward in the yModem supplied image and never backwards.
With the recent changes to the SPL mechanism, including loading
U-Boot first, FDT after, then the loadables, we must also reorder
the FIT image script to make sure that the loadables are last in
the FIT image.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2020-06-08 10:41:38 +02:00
Peng Fan
f3e1c536a9 imx: Kconfig: enable IMX_BOOTAUX for i.MX8M
i.MX8M could use imx bootaux to boot m4/m7 core, so let's add it
to the dependency list.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-06-08 10:39:24 +02:00
Giulio Benetti
8fde50f702 ARM: dts: imxrt1050: indent lcdif node correctly
Accidentally submitted a patch with indentation not correct, let's fix it
by indenting wrong lines.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-08 10:39:07 +02:00
Heiko Stuebner
97fa784725 rockchip: puma: reorganize devicetrees to actually work and match upstream
So far the puma dts files only just included the main puma dtsi without
handling the actual baseboard and rk3399-puma.dtsi was very much
detached from the variant in the mainline Linux kernel.

Recent changes resulted in a strange situation with nonworking puma boards.

Commit ab800e5a6f ("arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi")
moved the sdram include from rk3399-puma-ddrX.dts to new files
rk3399-puma-ddrx-u-boot.dtsi which were never included anywhere though.

Commit 167efc2c7a ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux")
replaced the rk3399-puma.dtsi nearly completely, but in the kernel
it definitly depends on a baseboard dts to actually enable peripherals
like sd-slot, uarts, etc.

So to untagle this and bring the whole thing more in line with mainline
Linux, bring the rk3399-puma-haikou.dts over as well, drop the separate
DDR-option devicetrees and instead replace them with a puma Kconfig option
to select and include the needed DDR variant.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07 18:57:16 +08:00
Heiko Stuebner
efcb2bd9cb rockchip: puma: fix indentation for -u-boot.dtsi
Tabs not spaces, so transform it to the common styling.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07 18:57:16 +08:00
Heiko Stuebner
e2dd607bce arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator
The regulator enable-gpio uses opposite values for the declaration
vs. the enable_active_low property, breaking the regulator enablement.

Make the usbhost-supply work again by bringing them in sync again.

This mimics the upstream Linux change found on:
http://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2020-06-07 18:57:16 +08:00
Heiko Stuebner
41c985d5fb arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin
The gmac reset has opposite values for the gpio declaration
and the separate reset-active, bring this in line to make
u-boot also find the ethernet-phy.

This mimics the upstream Linux commit found on
https://lore.kernel.org/r/20200603132836.362519-1-heiko@sntech.de

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07 18:57:16 +08:00
Marcin Juszkiewicz
b587acc6b1 rockchip: rockpro64: add SPI boot
U-Boot TPL 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42 +0200)
Trying to boot from SPI

U-Boot 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42 +0200)

SoC: Rockchip rk3399
Reset cause: RST
Model: Pine64 RockPro64 v2.1
DRAM:  3.9 GiB
PMIC:  RK808
MMC:   mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPI Flash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   vidconsole
Err:   vidconsole
Model: Pine64 RockPro64 v2.1
Net:   eth0: ethernet@fe300000
Hit any key to stop autoboot:  0
=>

Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07 18:57:16 +08:00
Jagan Teki
1831191b18 roc-rk3399-pc: Add SPI boot
U-Boot TPL 2020.07-rc3-00090-gd4e919f927-dirty (Jun 01 2020 - 23:45:53)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530)
Trying to boot from MMC1
NOTICE:  BL31: v2.2(release):
NOTICE:  BL31: Built : 15:05:37, May 12 2020

U-Boot 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530)

SoC: Rockchip rk3399
Reset cause: POR
Model: Firefly ROC-RK3399-PC Board
DRAM:  3.9 GiB
PMIC:  RK808
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPI Flash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Firefly ROC-RK3399-PC Board

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07 18:57:16 +08:00
Kever Yang
3d82b1b3d3 rockchip: rk3399-evb: add stdout-path for the board
The 'stdout-path' is missing after dts sync.
Fixes: 167efc2c7a ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux")

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07 18:57:16 +08:00
b.l.huang
5764911e67 rockchip: rk3328: add rock-pi-e dts file
The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328
Quad-Core ARM Cortex A53.

    Net - Dual ethernet port, 1 X Gbe, 1 X 100M
    USB - USB 3.0
    DC  - USB-Type C, 5V 2A
    Storage - TF card, eMMC

Just build idbloader.img and u-boot.itb for Rockpi E board and
follow the blow steps to replace the relevant partition.

    dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
    dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc

Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
2020-06-07 18:57:16 +08:00
Tom Rini
c27178ba36 First set of u-boot-atmel fixes for 2020.07 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAl7YxFMcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyJnICACR6Q6OclfIuM0A3ubV
 GV48+iVz55eZnrZFKkbALBNjwTsshLpdZ/7Lr4zPD5e/FmrbJ+RONd0B6E38fSJk
 Rq1ZwMyuR6yv+LAb9+La36tGqD9bCFewqBpR5LQNOdjE+fG66rrWxksMME1jOIr5
 FLpFkk3lmEUloQumHDCQUgzXC/TUWpedgxpT15l1nR/Ovkh/MPvggIdS2zMWw92J
 oA9shaNTVLd//W9icduXagNtRMsjscmf/zTZFCYgBRjUZgiPW+HnitWg7jqbYIuY
 AqmNBZIrC6OuZ7W447g1rMGwbwQ5T9vbydp6PpHVqPvTt3D8OZ9h1+Hwwie7u9O1
 CPaV
 =xLcT
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-fixes-2020.07-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

First set of u-boot-atmel fixes for 2020.07 cycle

This set includes just two small commits that fix a build warning and
add a missing serial node.
2020-06-04 10:21:51 -04:00
Tom Rini
1b6ae82a5a Pull request for UEFI sub-system for efi-2020-07-rc4
This patch series addresses the following issues:
 
 * allow compiling with clang
 * add missing function descriptions to the HTML documentation
 * simplify the validation of UEFI images
 * validate load options in the UEFI boot manager
 
 In a preparatory patch a structure definition is moved.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl7X4dIACgkQxIHbvCwF
 GsTMfxAAjYeEoHNhdxr6ZAytC653O0iIb6BQQmrkSakcAtU82PgkiUCJ+oSF09th
 nBpSHZ8QW92avfnmrY3FjXj8fPU01LV4gytZwnEtgi6OaWtenOc/t3pElVVk7adW
 17VbRTHY3Urb4+oM9hGI5KEmDOgRCe2LUOlOKA6b6tGiG+1mchE4gIgNGh3LDbbM
 bAojulCliDoKyIUHMSwrpqX7U5OQF89qhd4AhkmlnYe0OqZueEMS3pDwsHICuP2i
 j5SPqHF5r8Nm8Mf+bDLcRDK7xKQAkqGzqP8KwqVN1o7++4MbnlI/zL94vBrbbye9
 av7OucMyKL44+BnOpB1dm/Zp8rJpJhOdbr0MHzZCk9foPQrWoLXRGx0dJLWNJvGd
 Sb67YXBl8DP//uZCq4zdj/j9wuWE31ZbSRA7SM4ioODQYpRu3RdrQJltQcwIbcwK
 M0L0JDXDNdnNPBA3Fwe3QxpskKOaXm1C8yTgDxEnjd9qoZCbohTl/nRjntXQUZWN
 Xq3rmgxilYXSyYZ+hqtp6zT0KEZAMSHi/OibYSRQRva491hZS9qhcI3nPPpR30/s
 xBd1ee6WW2sZVHVrEfqkWb4w7379I9Cp08lfmk6Mk+pne4Cbn8qc/lH+fxAaKkO5
 eUTxWcWWuXJmgPtdZQux7bqDWr9WC6gUQ8W2PLLv4t8l7gqk1lE=
 =rbBa
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-07-rc4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-07-rc4

This patch series addresses the following issues:

* allow compiling with clang
* add missing function descriptions to the HTML documentation
* simplify the validation of UEFI images
* validate load options in the UEFI boot manager

In a preparatory patch a structure definition is moved.
2020-06-03 14:10:03 -04:00
Tom Rini
f1a69b8c73 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- H6 emac support
- USB PHY H6 logic alignment
2020-06-03 11:52:13 -04:00
Heinrich Schuchardt
4f7dc5f608 efi_loader: allow compiling with clang
On ARM systems gd is stored in register r9 or x18. When compiling with
clang gd is defined as a macro calling function gd_ptr(). So we can not
make assignments to gd.

In the UEFI sub-system we need to save gd when leaving to UEFI binaries and
have to restore gd when reentering U-Boot.

Define a new function set_gd() for setting gd and use it in the UEFI
sub-system.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Tom Rini <trini@konsulko.com>
2020-06-03 17:19:17 +02:00
Masahiro Yamada
9f8aa0fbee ARM: add psci_arch_init() declaration for CONFIG_ARMV7_PSCI
arch/arm/include/asm/system.h declares psci_arch_init(), but it is
surrounded by #ifdef CONFIG_ARMV8_PSCI.

psci_arch_init() is called for CONFIG_ARMV7_PSCI too. Add the missing
function declaration.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-06-02 17:27:04 -04:00
Samuel Holland
5cfeeacaea sunxi: Silence warning about non-static inline function
When compiling with CONFIG_SPL_SERIAL=n, gcc warns about
mbus_configure_port not being marked as static:

In file included from include/common.h:34,
                 from arch/arm/mach-sunxi/dram_sunxi_dw.c:11:
include/log.h:185:4: warning: 'printf' is static but used in inline function 'mbus_configure_port' which is not static
  185 |    printf(pr_fmt(fmt), ##args); \
      |    ^~~~~~
include/log.h:192:2: note: in expansion of macro 'debug_cond'
  192 |  debug_cond(_DEBUG, fmt, ##args)
      |  ^~~~~~~~~~
arch/arm/mach-sunxi/dram_sunxi_dw.c💯2: note: in expansion of macro 'debug'
  100 |  debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
      |  ^~~~~

Fix this by updating the function accordingly.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01 22:38:08 +05:30
Tom Rini
42c8a112d2 - stm32mp15: fix DT on DHCOR SOM and avenger96 board
- stm32mp15: re-enable KS8851 on DHCOM
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl7PYbcACgkQ4rK92eCq
 k3VaNAf6A5n4YBvwG6dPtZXdzUA/+dndv2iqF3Zkx+fWqgOJTLn87D/rB+BybHWV
 6JNTjEc8oc+FFF0n9Wx2soMvwIDKhqoGqx2C7dzuVkodQVQkQaSP+UU/FDoLfgLG
 J9DW0iRY36yUKl1ZsbsVuiCxcy54/nQpxbvjCtvRAz7GH45U77fD0aYIFJYQf9Nn
 1G/yISoDCac2UziizGL4VURNAG3cARmsNP2xZjW+V8Y8cHgDWauEaBMK+/snee5O
 DpsZox8WqfdMdRKs/mBwxi+3tU2qAx/GoH03d48aAL8NnkIyXxgoOdhcuDv4EF1b
 9vGO1DaMP4h6/0SggD00u0+uKO6mqw==
 =xiEp
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200528' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- stm32mp15: fix DT on DHCOR SOM and avenger96 board
- stm32mp15: re-enable KS8851 on DHCOM
2020-06-01 11:42:22 -04:00
Tom Rini
9452b7496f Merge tag 'u-boot-rockchip-20200531' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix mmc of path after syncfrom kernel dts;
- Add dwc3 host support with DM for rk3399;
- Add usb2phy and typec phy for rockchip platform;
- Migrate board list doc to rockchip.rst;
- Add rk3399 Pinebook Pro board support;
- Update dram_init in board_init and add memory node in SPL;
2020-05-31 20:07:39 -04:00
Heiko Stuebner
b6740fb116 rockchip: spl: do full dram_init instead of only probing
Parts of later SPL may need RAM information as well, so do full
dram_init() call, which includes the existing dram probing but also
initializes the ram information in gd.

dram_init() from sdram.c does the following steps:
- uclass_get_device(UCLASS_RAM, ...) like the current code
- ret = ram_get_info(dev, &ram);
- gd->ram_size = ram.size;

CONFIG_SPL_RAM already makes sure that sdram.c gets compiled
and thus no other variant of dram_init() can exist.

So it's the same functionality as before and only adds that the
SPL now aquires knowledge about the amount of available ram,
which it didn't know about before.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-31 22:22:07 +08:00
Peter Robinson
9fb8e24804 rockchip: Add initial support for the Pinebook Pro laptop from Pine64.
Specification:
- Rockchip RK3399
- 4GB Dual-Channel LPDDR4
- eMMC socket
- mSD card slot
- 128Mbit (16Mb) SPI Flash
- AP6256 for 11AC WiFi + BT5
- 14 inch 1920*1080 eDP MiPi display
- Camera
- USB 3.0, 2.0 ports
- Type-C port with alt-mode display (DP 1.2) and 15W charge
- DC 5V/3A
- optional PCIe slot for NVMe SSD drive

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-31 22:22:07 +08:00
Peter Robinson
7390fb9999 arm: dts: rockchip: Add initial DT for Pinebook Pro
Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-31 20:46:08 +08:00
Frank Wang
86554ab10a ARM: dts: rk3399-evb: usb3.0 host support
Configure 'tcphy1' and 'usbdrd_dwc3_1' nodes to support USB3.0 host
for Rockchip RK3399 Evaluation Board.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-30 07:38:50 +08:00
Frank Wang
c28ef1bcc8 arm: mach-rockchip: bind sub-nodes for rk3399_syscon
There are some sub-nodes under the grf DT, so add bind callback
function in rk3399 syscon driver to scan them recursively.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29 18:13:19 +08:00
Jagan Teki
20dcee45cb arm64: dts: rk3399-nanopi4: Add u-boot,spl-boot-order
Add u-boot,spl-boot-order as sdhci and sdmmc for booting
from eMMC and SD card.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29 17:58:55 +08:00
Jagan Teki
97de3935aa rockchip: Fix spl mmc boot device ofpath
Linux v5.7-rc1 dts(i) sync has changed the sdmmc node from
dwmmc@fe320000 to mmc@fe320000 and this ofpath is being
used in rockchip spl bootdevice code.

So, update the ofpath with a new node name and prefix "same-as-spl"
to missing u-boot,spl-boot-order.

Bug log:
U-Boot SPL 2020.07-rc2-00256-g9c5fef5774 (May 24 2020 - 20:20:43 +0530)
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices

Fixes: 167efc2c7a ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux"
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29 17:58:21 +08:00
Neil Armstrong
3678a5f059 arm: dts: meson-gxl: fix USB gadget by adding missing nodes for U-Boot
The khadas-vim, khadas-vim2, libretech-ac & libretech-*-pc boards were missing
DT tweak to enable USB gadget.
Add them to their -u-boot.dtsi files and include the right gxl-u-boot.dtsi.

Fixes: a19e8a0f03 ("arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot")
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-05-29 10:20:34 +02:00
Neil Armstrong
21981c1059 arm: dts: khadas-vim3: include meson-g12-common-u-boot.dtsi to enable HDMI output
Include the common g12 u-boot tweaks to permit enabling video output tweaks
on Khadas VIM3 boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-05-29 10:20:34 +02:00
Marek Vasut
08f372ac2a ARM: dts: stm32: Disable SDR104 mode on AV96
Disable SDR104 mode until we know it is really stable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-28 08:52:04 +02:00
Marek Vasut
39a18aaa33 ARM: dts: stm32: Repair I2C2 operation on AV96
The I2C2 uses different pinmux on AV96, use correct pinmux and
also add comments about the I2C being present on the "low-speed"
expansion connector X6.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-28 08:52:04 +02:00
Marek Vasut
b1ebcd27ee ARM: dts: stm32: Add alternate pinmux for I2C2 pins
Add another mux option for I2C2 pins, this is used on AV96 board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-28 08:52:04 +02:00
Marek Vasut
8b4101d0f9 ARM: stm32: Hog GPIO PF7 high on DHCOR to unlock SPI NOR nWP
The SPI NOR nWP line is connected to GPIO PF7 on the SoM,
pull the GPIO line high by default to clear SPI NOR WP.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-28 08:52:04 +02:00
Luka Kovacic
df9ebbe17e arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier
implementation of new CRS3xx series boards, based on Marvell Prestera
98DX3236.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
2020-05-27 07:03:17 +02:00
Jakov Petrina
8678776df6 arm: mvebu: armada-3720-uDPU: fix PHY mode definition to sgmii-2500
Commit f49ac7e1c4 switched the default PHY speed to 3.125Gbit to resolve
issues with SFP modules. However, U-Boot does not have a "2500base-x"
phy-mode.

Resolve this by using "sgmii-2500" instead.

Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Stefan Roese <sr@denx.de>
2020-05-27 07:03:01 +02:00
Ezra Buehler
a1a61b0672 arm: mvebu: ds414: add u-boot,dm-pre-reloc to spi0
Without this U-Boot-specific property, booting on the Synology DS414
(or DS214+) fails in SPL. The spi0 DT node is not scanned, as a result
the SPI flash cannot be found.

Signed-off-by: Ezra Buehler <ezra@easyb.ch>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-27 07:02:24 +02:00
Tom Rini
60c7facfc9 Merge tag 'ti-v2020.07-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Enable DM_ETH on omap3_logic board
- Enable Caches in SPL for K3 platforms
- Enable backup boot mode support for J721E
- Update the DDR timings for AM654 EVM
- Add automated tests for RX-51
2020-05-25 14:09:42 -04:00
Peng Fan
b4b2619211 armv8: cache_v8: fix mmu_set_region_dcache_behaviour
The enum dcache_optoion contains a shift left 2 bits in the armv8 case
already.  The PMD_ATTRINDX(option) macro will perform a left shift of 2
bits.  Perform a right shift so that in the end we get the correct
value.

[trini: Reword the commit message]
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-25 11:54:53 -04:00
Tom Rini
9c5fef5774 Merge git://git.denx.de/u-boot-usb
- DM support for OMAP
- DWC3 fix
- Typo fix in eth/r8152
2020-05-22 22:58:50 -04:00
Tom Rini
f53c2dc162 Merge tag 'u-boot-rockchip-20200522' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix rk3288 chromebook veyron support;
- Add pcie driver support for rk3399;
- other fixes for rk3399 boards
2020-05-22 10:28:38 -04:00
Adam Ford
94ed66194f usb: ehci-omap: Add Support for DM_USB and OF_CONTROL
The omap3.dtsi file shows the usbhshost node with two sub-nodes
for ohci and ehci.  This patch file creates the usbhshost, and
pulls the portX-mode information.  It then locates the EHCI
sub-node, and initializes the EHCI controller with the info
pulled from the usbhshost node.

There is still more to do since there isn't an actual link
between the 'phys' reference and the corresponding phy driver,
and there is no nop-xceiv driver yet.

In the meantime, the older style reference to
CONFIG_OMAP_EHCI_PHYx_RESET_GPIO is still needed to pull
the phy out of reset until the phy driver is completed and the
phandle reference is made.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-22 15:22:35 +02:00
Kurt Miller
33863f744d rockchip: rk3328: rock64 - fix gen3 SPL hang
Use the same approach as ROC-RK3328-CC which enables SPL GPIO,
pinctl and regulator support. This allows the gen3 board to
boot through SPL and does not break gen2 in the process.

Signed-off-by: Kurt Miller <kurt@intricatesoftware.com>
Acked-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Urja Rannikko
e68a843601 rockchip: spl-boot-order: do not attempt to access fdt if OF_PLATDATA
gd->fdt_blob is null if using OF_PLATDATA in SPL, which causes a hang
after f0921f5098 ("fdt: Sync up to the latest libfdt").
We use the same test that is used in spl_common_init on whether to call
fdtdec_setup to unconditionally avoid linking in the fdt-using code
when not necessary and thus reduce SPL size.

Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Urja Rannikko
353ad95aa6 rockchip: spl: veyron speedy boots from SPI
Apparently speedy was forgotten from this list of veyron devices.

Fixes: 49105fb7ed ("rockchip: add common spl board file")
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Jagan Teki
765a12d6a3 rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2
Enable PCIe/M.2 support on
- NanoPC-T4
- ROC-RK3399-PC Mezzanine boards.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Deepak Das
5c606ca35c rockchip: rk3399: enable spl-fifo-mode for sdmmc
adapting commit fa2047c473 ("rockchip: rk3328: enable spl-fifo-mode
for emmc and sdmmc") for rk3399.
Since mmc to sram can't do dma, add patch to prevent aborts transferring
TF-A parts.

Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-22 17:24:30 +08:00