Commit graph

75755 commits

Author SHA1 Message Date
Wolfgang Denk
265817c7e6 Add support for AMD's Pb1x00 eval board;
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
2005-09-25 00:53:22 +02:00
Wolfgang Denk
b63de2c053 Update omap5912osk board:
Use drivers/cfi_flash.c instead of private flash driver;
Remove hardcoded personalized settings from omap5912osk.h;
Fix spacing with (RO) marks in 'flinfo' output.
Patch by Michael Bendzick, 14 Jan 2005
2005-09-25 00:23:05 +02:00
Wolfgang Denk
3706ba1a36 Fix warnings for PCI code on ixp
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
2005-09-25 00:00:45 +02:00
Wolfgang Denk
9a9200b4a7 virtex2 fix for bogus download error messages
The virtex2 FPGA download code watches for init going active during
a download of config data as an error condition. init also goes
active after a configuration is finished in concert with the done
signal. So far, the code does not check for done active until all
of the configuration data is sent. If configuration data has a few
extra pad bytes at the end, this would cause an error message even
though the download had suceeded.
NOTE: virtex2 slave serial and spartan2 versions may still have the
same problem.
Patch by Andrew Dyer, 12 Jan 2005
2005-09-24 23:41:00 +02:00
Wolfgang Denk
dafbe3790e Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
message when probing for nonexistent flash in little endian mode.
As a side effect more efficient and smaller code is generated,
which is always a Good Thing (TM).
Patch by Ladislav Michl, 24 Sep 2005
2005-09-24 23:32:48 +02:00
Wolfgang Denk
28cb937584 Update for TFTP using a fixed UDP port
Use the approved environment variable names. Added "tftpdstp" to
allow ports other than 69 per Tolunay Orkun's recommendation.
Patch by Jerry Van Baren, 12 Jan 2005
2005-09-24 23:25:46 +02:00
Wolfgang Denk
ecb0ccd9c2 Allow to force TFTP to use a fixed UDP port
(Add a configuration option CONFIG_TFTP_PORT and optional env variable tftpport)
Patch by Jerry Van Baren, 10 Jan 2005
2005-09-24 22:37:32 +02:00
Wolfgang Denk
4bc12f1ccf Fix ethernet timeouts on dbau1550 and other au1x00 systems
Patch by Leif Lindholm, 29 Dec 2004
2005-09-24 22:05:40 +02:00
Wolfgang Denk
2b792afcc5 * Fix PHY address argument passing with mii info command
Patch by Andrew Dyer, 28 Dec 2004

* Cleanup: fix broken builds
2005-09-24 21:54:50 +02:00
Wolfgang Denk
9ea4b5886a More cleanup: get rid or redundand #defines 2005-09-23 13:12:15 +02:00
Wolfgang Denk
0c8721a466 Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
Wolfgang Denk
a6e6cf0036 Merge with /home/wd/git/u-boot/work 2005-09-22 09:46:19 +02:00
Wolfgang Denk
1caa70788c Cleanup - update CHANGELOG, undo test settings 2005-09-22 09:34:17 +02:00
Stefan Roese
7644f16f6b esd CPCI2DP board added
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:16:57 +02:00
Stefan Roese
026cb5d864 esd PMC405 board updated
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:07:15 +02:00
Stefan Roese
98f4a3dfcb Add SM501 support to HH405 board.
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
2005-09-22 09:04:17 +02:00
Stefan Roese
5810dc3a2e Fix autonegotiation in tsec ethernet driver
Patch by Stefan Roese, 21 Sep 2005
2005-09-21 18:20:22 +02:00
Wolfgang Denk
8b4c9e7c14 Fix bug in auto_update (trab board)
Patch by Martin Krause, 16 Sep 2005
2005-09-21 15:31:25 +02:00
Wolfgang Denk
59d80bf180 Fix computation of framebuffer palette for 8bpp LCD bitmaps
Patch by Francesco Mandracci, 16 Sep 2005
2005-09-21 15:24:52 +02:00
Wolfgang Denk
1806c75959 Update configuration for INKA4x0 board 2005-09-21 10:07:56 +02:00
Wolfgang Denk
29fe1c0fa4 Update configuration for PM854 board
Based on patch by R. Loeffl, 20 Jul 2005
2005-09-21 09:59:55 +02:00
Stefan Roese
053b40fa0c Add PCI support to TQM8540 and TQM8560 boards
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 14:41:11 +02:00
Stefan Roese
34c0a5e98b Update AMCC Yosemite to get a consistent setup for all AMCC eval
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 11:34:07 +02:00
Wolfgang Denk
ac7eb8a315 Update of new NAND code
Patch by Ladislav Michl, 13 Sep 2005
2005-09-14 23:53:32 +02:00
Wolfgang Denk
3edb0ccf61 Merge with /home/wd/git/u-boot/master 2005-09-14 17:06:43 +02:00
Wolfgang Denk
47278471f9 Merge with /home/sr/git/u-boot 2005-09-14 16:59:18 +02:00
Wolfgang Denk
e1b7296126 Add support for mtddevnum and mtddevname variables (mtdparts command)
[Merge with /home/m8/git/u-boot]
2005-09-13 00:20:45 +02:00
Wolfgang Denk
670d9f132d Change default console baud rate for stxxtc board 2005-09-13 00:12:33 +02:00
Marian Balakowicz
7d45477bfa Added support for mtddevnum and mtddevname variables (mtdparts command) 2005-09-11 15:27:12 +02:00
Stefan Roese
4a3cd9e655 Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
ethernet port on ebony.
Patch by Stefan Roese, 7 Sep 2005
2005-09-07 16:21:12 +02:00
Wolfgang Denk
5d244ea128 Merge with /home/sr/git/u-boot:
Add I2C support for TQM85xx
2005-09-06 22:17:16 +02:00
Wolfgang Denk
c44ffb9efa Update MPC5200 FIFO Control settings
(u-boot.habanero.fifo_cntrl.patch from Freescale)
2005-09-04 23:19:41 +02:00
Wolfgang Denk
80e238c7f0 Fix default command set (don't include CFG_CMD_DISPLAY command)
Patch by Pantelis Antoniou, 02 Sep 2005
2005-09-03 02:22:41 +02:00
Wolfgang Denk
6d51e505ad Cleanup compiler warnings. 2005-09-03 01:58:35 +02:00
Wolfgang Denk
7b3e3c5954 Update CHANGELOG. 2005-09-03 01:23:25 +02:00
Wolfgang Denk
ccd9d3d60c Enable SM712 driver support for HMI1001 board. 2005-09-03 01:21:50 +02:00
Stefan Roese
9d2a873bdf Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
2005-08-31 12:55:50 +02:00
Wolfgang Denk
77f6580cc0 Update CHANGELOG file 2005-08-31 12:30:09 +02:00
Wolfgang Denk
807d5d7319 Fix problems with ld version 2.16 (dot outside sections problem)
Pointed out by Gerhard Jaeger, 31 Aug 2005;
cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
2005-08-31 12:28:00 +02:00
Wolfgang Denk
bce84c4dab Prepare U-Boot for gcc-4.x: fix global data pointer initialization
The global data pointer, stored in r29 before relocation to RAM, was
not initialized to a correct value. This happened because the pointer
declaration was done locally in the scope of the board_init_f()
function. What follows is a cite from gcc.info, 5.37, "Variables in
Specified Registers":
    ...
    The compiler's data flow analysis is capable of determining where
    the specified registers contain live values, and where they are
    available for other uses. Stores into local register variables
    may be deleted when they appear to be dead according to dataflow
    analysis. References to local register variables may be deleted
    or moved or simplified.
    ...
Moving the global data declaration to global scope solved the
problem.
2005-08-30 14:13:23 +02:00
Wolfgang Denk
f7fbf269fe Adjust CS3 timings on HMI1001 board for dot matrix display under Linux 2005-08-30 13:43:18 +02:00
Wolfgang Denk
9f96ae44c6 Add keyboard and dot matrix display support for HMI1001 board. 2005-08-30 13:04:12 +02:00
Wolfgang Denk
7bc5ee0785 Prepare U-Boot for gcc-4.x 2005-08-26 01:36:03 +02:00
Wolfgang Denk
61dada83f3 Minor reformatting 2005-08-24 12:41:18 +02:00
Stefan Roese
a3e4fcb860 Fixed bamboo port to enable running without DDR-DIMM (bamboo has also 64MB onboard DDR)
Patch by Stefan Roese, 24 Aug 2005
2005-08-24 11:21:36 +02:00
Wolfgang Denk
a9fe9f427d Update CHANGELOG 2005-08-23 23:04:40 +02:00
Wolfgang Denk
ec2e5a2cce Merge with testing-4xx_enet (Create generic 4xx Ethernet code) 2005-08-23 23:03:20 +02:00
Wolfgang Denk
2ac4785c2f Fix make dependencies for at91rm9200 and ks8695 cpus
Patch by Steven Scholz, 23 Aug 2005
2005-08-23 22:29:44 +02:00
Wolfgang Denk
d534f5cc38 Add JFFS2 support for TQM5200 board 2005-08-23 22:27:41 +02:00
Stefan Roese
5e4b3361bc Add esd cpci5200 and pf5200 boards
Patch by Reinhard Arlt, 22 Aug 2005
2005-08-22 17:51:53 +02:00