Commit graph

13 commits

Author SHA1 Message Date
Alison Wang
39c7a26352 ColdFire: uart: fix build failure for missing header files
The following commit introduces some build failures for ColdFire
platform.

commit abaef69fbe
Author: Marek Vasut <marex@denx.de>
Date:   Thu Sep 13 16:51:38 2012 +0200

Add the missed header files.

Sign-off-by: Alison Wang <b18965@freescale.com>
2012-10-19 23:52:16 +08:00
Marek Vasut
ec3fd68952 serial: Use default_serial_puts() in drivers
Replace the in-place ad-hoc implementation of serial_puts() within
the drivers with default_serial_puts() call. This cuts down on the
code duplication quite a bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:55:50 -07:00
Marek Vasut
a382725060 serial: Remove CONFIG_SERIAL_MULTI from serial drivers
Remove the support for not-CONFIG_SERIAL_MULTI part from serial
port drivers and some board files. Since CONFIG_SERIAL_MULTI is
now enabled by default, that part is a dead code. Remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:58 -07:00
Marek Vasut
abaef69fbe serial: mcf: Implement CONFIG_SERIAL_MULTI into MCF serial driver
Implement support for CONFIG_SERIAL_MULTI into MCF serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the MCF driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: TsiChung Liew <tsicliew@gmail.com>
2012-10-15 11:53:54 -07:00
TsiChung Liew
fa9da59621 ColdFire: Update uart_port_conf in serial driver
Provide proper port passing from serial_init to uart_part_conf.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2010-03-24 11:09:08 -05:00
Richard Retanubun
92d3e6e0ff Coldfire: Applied baudrate formula of serial_init to serial_setbrg
Applied the patch for baudrate divider value truncation for
serial_init to serial_setbrg as well.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2009-02-06 14:54:47 -07:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Stefan Roese
f2302d4430 Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:05:38 +02:00
TsiChung Liew
81cc32322a ColdFire: Fix UART baudrate formula
The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
can generate the wrong divisor due to integer division truncation.
Round the calculated divisor value by adding 1/2 the baudrate
before dividing by the baudrate.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2008-07-11 10:45:56 -06:00
Wolfgang Denk
3e66c07800 Fix some build errors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-19 10:27:34 +02:00
TsiChungLiew
8d1d66af54 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-08 09:47:25 +02:00
TsiChungLiew
9998bd37ea Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-08 09:46:55 +02:00
TsiChungLiew
2bd806fe4f Rename mcfserial.c. Update include header
Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10 14:29:09 -06:00
Renamed from drivers/serial/mcfserial.c (Browse further)