Commit graph

83083 commits

Author SHA1 Message Date
Balamanikandan Gunasundar
2cf5d0aa8e configs: at91: sam9x60ek: Enable DM based nand driver
Enable Device model supported NAND driver and remove legacy Atmel NAND
driver.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
2dc1b8fe17 mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
Add helper functions for atmel Static Memory Controller. The functions
are required to configure SMC. This file is inherited from the work
done by Boris Brezillon for Linux

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
68ddf18dc3 memory: atmel-ebi: add Atmel EBI (External Bus Interface) driver
The EBI is used to access peripherals like NAND, SRAM, NOR etc. Add
this driver to probe the nand flash controller. This is a dummy driver
and not yet a complete device driver for EBI.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
de32a2a32a mfd: syscon: Add atmel-matrix registers definition
This file is copied from Linux. AT91 SoCs have a memory range reserved
for internal bus configuration. Expose those registers so that drivers
can make use of the matrix syscon declared in at91 DTs.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
a490e1b7c0 nand: atmel: Add pmecc driver
Add driver for atmel pmecc. This implementation is ported from
Linux. The reference taken is linux-5.4-at91.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Balamanikandan Gunasundar
6a8dfd5722 nand: atmel: Add DM based NAND driver
This implementation is ported from the rework done by Boris Brezillon
in Linux. This porting is done based on linux-5.4-at91. The driver is
tested in sam9x60ek, sama5d3_xplained, sam9x75eb and sama7g54-ddr3-eb.

Changes done includes

- Adapt GPIO descriptor apis for U-Boot. Use gpio_request_by_name_nodev,
  dm_gpio_get_value etc.
- Use U_BOOT_DRIVER instead of platform_driver.
- Replace struct platform_device with struct udevice
- Check the status of nfc exec operation by polling the status
  register instead of interrupt based handling
- DMA operations not supported. Remove it
- Adapt DT parsing to U-Boot APIs

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:18 +02:00
Tom Rini
d2ad92927e Merge branch '2022-12-05-Kconfig-migrations-and-renames' into next
- First batch of the patches that end up with
  scripts/config_whitelist.tx being empty. Mostly migrations and a
  little bit of code removal and CFG renaming.
2022-12-05 21:04:24 -05:00
Tom Rini
7102d324f6 m68k: Rename CONFIG_WATCHDOG_TIMEOUT to CONFIG_WATCHDOG_TIMEOUT_MSECS
In practice, it is clear that the usage in m68k of
CONFIG_WATCHDOG_TIMEOUT is setting a value in milliseconds. Rename this
to the existing symbol and move to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 18:16:43 -05:00
Tom Rini
9cebc4ad8e post: Migrate to Kconfig
We move the existing CONFIG_POST_* functionality over to CFG_POST and
then introduce CONFIG_POST to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
d948c8988c sandbox: Rework how SDL is enabled / disabled
Given that we can use Kconfig logic directly to see if we have a program
available on the host or not, change from passing NO_SDL to instead
controlling CONFIG_SANDBOX_SDL in Kconfig directly. Introduce
CONFIG_HOST_HAS_SDL as the way to test for sdl2-config and default
CONFIG_SANDBOX_SDL on if we have that, or not.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
17f13e7119 scripts/config_whitelist.txt: Remove more referenced symbols
Perform some deeper investigation on the remaining symbols listed in
this file and remove more.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
5bacad6462 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:09:46 -05:00
Tom Rini
5afc87eadb net: ftmac100: Remove non-DM_ETH code
At this point all users of this driver enable DM_ETH, so remove the
legacy code paths.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-12-05 16:08:38 -05:00
Tom Rini
be3bea2ba3 Convert CONFIG_VSC7385_ENET et al to Kconfig
This converts the following to Kconfig:
   CONFIG_VSC7385_ENET
   CONFIG_VSC9953

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:38 -05:00
Tom Rini
a9c3bce362 Convert CONFIG_USB_GADGET_AT91 to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_GADGET_AT91

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
08d01cda45 Nokia RX-51: Migrate legacy USB device options to Kconfig
Move a number of legacy USB UDC options to Kconfig, over from the config
header.

Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
b43295a277 Convert CONFIG_TEGRA_CLOCK_SCALING et al to Kconfig
This converts the following to Kconfig:
   CONFIG_TEGRA_CLOCK_SCALING
   CONFIG_TEGRA_LP0
   CONFIG_TEGRA_PMU

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
fcd7ba655e Convert CONFIG_TPS6586X_POWER et al to Kconfig
This converts the following to Kconfig:
   CONFIG_TPS6586X_POWER
   CONFIG_TWL6030_POWER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
8ce59b5932 Convert CONFIG_SPD_EEPROM to Kconfig
This converts the following to Kconfig:
   CONFIG_SPD_EEPROM

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
d91365203c Convert CONFIG_SMSC_LPC47M et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SMSC_LPC47M
   CONFIG_SMSC_SIO1007

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
1c34f7885d Convert CONFIG_SH_GPIO_PFC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SH_GPIO_PFC
   CONFIG_TMU_TIMER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
ea467ea1cd Convert CONFIG_RTC_DS1337 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_RTC_DS1337
   CONFIG_RTC_DS1337_NOOSC
   CONFIG_RTC_DS1338
   CONFIG_RTC_DS1374
   CONFIG_RTC_DS3231
   CONFIG_RTC_MC13XXX
   CONFIG_RTC_MXS
   CONFIG_RTC_PT7C4338

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
c3187fb144 Convert CONFIG_PCA953X to Kconfig
This converts the following to Kconfig:
   CONFIG_PCA953X

Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
9200011e95 Convert CONFIG_NAND_KMETER1 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_NAND_ECC_BCH
   CONFIG_NAND_KIRKWOOD
   CONFIG_NAND_KMETER1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
6c03a65275 Convert CONFIG_MXS_OCOTP to Kconfig
This converts the following to Kconfig:
   CONFIG_MXS_OCOTP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
2568bd6db7 arm: Remove unused mx27 code
We no longer have any i.MX27 platforms, remove the remaining support
code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
4982e123b2 arm: samsung: Move CONFIG_MISC_COMMON to Kconfig
This option controls using board/samsung/common/misc.c, so add a Kconfig
file there as well and select it from the boards which use this
functionality.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-12-05 16:07:13 -05:00
Tom Rini
00faea644a arm: ls102xa: Migrate LS102XA_STREAM_ID
This symbol appears to be globally used in the architecture, select it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
d5596cbc6e arm: lpc32xx: Remove unused hsuart driver
This driver is not enabled in any config currently, remove it.

Cc: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
68e54040cc sandbox: Move CONFIG_IO_TRACE to Kconfig
This is only used on sandbox, so select it there.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:07:13 -05:00
Tom Rini
c136a86105 Convert CONFIG_IOMUX_SHARE_CONF_REG et al to Kconfig
This converts the following to Kconfig:
   CONFIG_IOMUX_LPSR
   CONFIG_IOMUX_SHARE_CONF_REG

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
d5c77533b4 Convert CONFIG_IODELAY_RECALIBRATION to Kconfig
This converts the following to Kconfig:
   CONFIG_IODELAY_RECALIBRATION

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
500dfebf22 mpc8548cds: Migrate CONFIG_INTERRUPTS to Kconfig
Only this platform sets this option, define it in the board Kconfig
file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
0ea156ba00 Convert CONFIG_IMX_VIDEO_SKIP et al to Kconfig
This converts the following to Kconfig:
   CONFIG_IMX_VIDEO_SKIP
   CONFIG_IMX_HDMI

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
4eea765740 pwm: imx: Remove unused references to CONFIG_IMX6_PWM_PER_CLK
On platforms that use DM_PWM, we do not need to define this value
anymore, so remove it from config files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
98cb4c6b8e arm920t: Remove unused imx code
This code is currently unused, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
19b4040df0 Convert CONFIG_HWCONFIG to Kconfig
This converts the following to Kconfig:
   CONFIG_HWCONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
d9feb83505 Convert CONFIG_POWER_LTC3676 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_POWER_FSL
   CONFIG_POWER_FSL_MC13892
   CONFIG_POWER_HI6553
   CONFIG_POWER_LTC3676
   CONFIG_POWER_PFUZE100
   CONFIG_POWER_PFUZE3000
   CONFIG_POWER_SPI
   CONFIG_POWER_TPS65090_EC
   CONFIG_POWER_TPS65218
   CONFIG_POWER_TPS65910

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
022dc9e505 Convert CONFIG_HIKEY_GPIO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_HIKEY_GPIO
   CONFIG_TCA642X

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
5cafaedeac Convert CONFIG_FSL_SERDES to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_SERDES

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
d58d0663cb Convert CONFIG_FSL_LBC to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_LBC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
060613f119 Convert CONFIG_FSL_IIM to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_IIM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
345c09de5e Convert CONFIG_FSL_DEVICE_DISABLE to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_DEVICE_DISABLE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
2a776c79db Convert CONFIG_FSL_CADMUS to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_CADMUS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
518c5dfab0 power: pmic: Guard non-DM_PMIC drivers with a check for POWER_LEGACY
As we have more legacy PMIC drivers to move to Kconfig, guard them all
with POWER_LEGACY or SPL_POWER_LEGACY. Do the same kind of check for
building the drivers too. This also means that we need to resort the
list slightly in the Makefile.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:43 -05:00
Tom Rini
65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
a322afc9f9 global: Move remaining CONFIG_*SRIO_* to CFG_*
The rest of the unmigrated CONFIG symbols in the SRIO namespace do not
easily transition to Kconfig. In many cases they likely should come from
the device tree instead. Move these out of CONFIG namespace and in to
CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
97396cc9ce Convert CONFIG_SYS_SRIO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SRIO1
   CONFIG_SRIO2
   CONFIG_SRIO_PCIE_BOOT_MASTER
   CONFIG_SYS_SRIO

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
3b8dfc42a2 Convert CONFIG_SYS_TIMER_COUNTS_DOWN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_TIMER_COUNTS_DOWN

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
aa6e94deab global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00