Commit graph

87068 commits

Author SHA1 Message Date
Christophe Leroy
fdd243d81b powerpc: mpc8xx: CPM parameter RAM can be anywhere
With relocation, CPM parameter RAM can be anywhere in the
dual port RAM, so don't split dual port RAM.

Remove dparam and dparam16 members of struct comm_proc

PROFF_XXX become offsets from the start of dual port RAM,
then they are now consistant with the offsets in RPBASE
registers.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Christophe Leroy
019b39b736 board: cssi: Load CMPC885's motherboard FPGA earlier
In order to know the motherboard type earlier, perform I/O ports
initialisation and FPGA loading in board_early_init_f() instead
of board_early_init_r().

This is needed to be able to load mpc8xx CPM microcode base on
motherboard type and before starting to use the CPM.

Console is not available yet so remove the printfs.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Christophe Leroy
756af9ab83 board: cssi: Remove stale macro from cmpcpro.c
Three unused macros were left over. Remove them.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Christophe Leroy
66d23d2237 board: cssi: Remove duplicated FPGA loading sequence on CMPC885
A duplicated FPGA loading sequence appears after FPGA reset.

Remove it.

Fixes: dac3c6f625 ("board: cssi: Add new board MCR3000_2G")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Simon Glass
27a03f03b2 efi: Rename the base efi self-test
This function uses the same base name as all the others in this file, so
it is not easy to run just that one test. Add a _base suffix so that it
can be run on its own.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
feff3e6c38 doc: man-page for cp
Add a man-page for the cp command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
bd730aa05b test: fix pydoc issues for EFI tests
Fix issues reported by pydocstyle.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
d1474f5aa0 doc: correct HiFive Unmatched boot description
Main U-Boot is loaded by sector number, not by partition GUID type.

Fixes: 70415e1e52 ("board: sifive: add HiFive Unmatched board support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
eb59b9e88b doc: fix StarFive VisionFive v2 documentation
The number of the partition that U-Boot SPL loads the main U-Boot from is
defined as 2 by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2. The
partition type GUID is not used currently.

Reword the description of the boot process to make it clearer.

Fixes: 5ecf9b0b8a ("board: starfive: add StarFive VisionFive v2 board support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
e942fabe8a doc: Indicate required OpenSBI release for VisionFive 2
Support for the VisionFive 2 board is not contained in the most recent
OpenSBI release (v1.2).

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-05-04 09:57:43 +02:00
Pavel Skripkin
d53b2cfe08 docs: fix wrong proftool usage
Guide shows incorrect usage of proftool, which is confusing. If proftool
is used w/o '-o' argument it complains like following

$ ./sandbox/tools/proftool -m sandbox/System.map -t trace dump-ftrace > trace.dat
Must provide trace data, System.map file and output file
Usage: proftool [-cmtv] <cmd> <profdata>

s/>/-o/ fixes it and proftool outputs decoded data to trace.dat

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Alexander Shirokov
962424a873 doc: mmc: drop 0x prefixes in read/write examples
The patch drops 0x prefixes because all numbers are interpreted as HEX
by default.

Also, it fixes the mismatch between input arguments and output at 'mmc
write' example. Now it's 256 (0x100) blocks.

Signed-off-by: Alexander Shirokov <shirokovalexs@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
f8816a8a91 dm: core: fix introduce uclass_get_device_by_of_path
Correct the function documentation.

Fixes: ca031c0827 ("dm: core: introduce uclass_get_device_by_of_path()")
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
d0d0e776cf tools: fix TestFdtUtil()
Variable old_outdir cannot be used before assignment.
The assignment must occur before the try block.

tools/dtoc/test_fdt.py:796:26:
E0601: Using variable 'old_outdir' before assignment
(used-before-assignment)

Add missing space in assignment.

Fixes: a004f29464 ("binman: Tidy up _SetupDtb() to use its own temporary file")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Pali Rohár
0d734df4a4 pci: fsl: Do not access PCI BAR0 register of PCIe Root Port
Freescale PCIe Root Port has PEXCSRBAR register at position of PCI BAR0.
PCIe Root Port does not have any PCIe memory, so returns zero when trying
to read from PCIe Root Port BAR0 and ignore any writes.

Signed-off-by: Pali Rohár <pali@kernel.org>
2023-05-03 18:30:46 -04:00
Simon Glass
43bdb3b39a buildman: Pass -Werror to the host compiler too
The host compiler is not failing on warnings at present, when the
-E flag is used in buildman. Add the required flag to fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com>
2023-05-03 18:30:46 -04:00
Hugo Villeneuve
a7989a7cc2 common/Kconfig: fix comments syntax error
Fix comments error in EVENT_DEBUG description:
    this get usefui -> this to get useful

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Hugo Villeneuve
ed356ac930 event: fix comments syntax error
Fix comments syntax error in event description:
    creasted -> created

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Hugo Villeneuve
b42303723a boot/Kconfig: fix comments syntax error
Fix comments syntax error in SPL_LOAD_FIT_APPLY_OVERLAY description.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Marek Vasut
a76315052b cmd: bdinfo: Print ethaddr of current MAC
Instead of always printing ethaddr of MAC 0, print eth%daddr of the current MAC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Marek Vasut
d8eb4e2c05 cmd: bdinfo: Wrap network information printing into print_eth()
Move all the network information printing into print_eth(),
no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Marek Vasut
55922ed5fa cmd: bdinfo: Map fdt_blob and new_fdt to sysmem
Map fdt_blob and new_fdt to sysmem, otherwise $fdtcontroladdr
and bdinfo output do not match and the bdinfo output address
is not a valid address accessible via sandbox memory accessors.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Heinrich Schuchardt
5fd1084657 tools: fix TestFdtUtil()
Variable old_outdir cannot be used before assignment.
The assignment must occur before the try block.

tools/dtoc/test_fdt.py:796:26:
E0601: Using variable 'old_outdir' before assignment
(used-before-assignment)

Add missing space in assignment.

Fixes: a004f29464 ("binman: Tidy up _SetupDtb() to use its own temporary file")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Stefan Herbrechtsmeier
2ac800a66f test: hush_if_test: Add hush variable test
Add a test for the hush shell variable assignment and clear.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Stefan Herbrechtsmeier
930ef10992 common: cli_hush: Restore clear local variable support
The u-boot hush shell doesn’t support the unset command to clear a
variable and therefore an empty value ("c=") should be a valid value
for the set_local_var function to clear the variable. This partial
reverts commit aa72252963 ("common: cli_hush: avoid dead code") and
only checks for a `=` in the string. Additionally explicit call the
unset_local_var function to remove the variable if the value is empty.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 18:30:46 -04:00
Tom Rini
d30fbabade bk4r1: Enable LTO
In order to allow for general platform growth due to fixes, enable LTO
here to give us more room.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-03 18:30:46 -04:00
Tom Rini
2440719d25 u-boot-imx-20230503
-------------------
 
 - Fixes for : pico-imx6ul, smegw01
 - new boards: DMSSE20, Reform 2
 - fix: get_boot_device, PLL video rate
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16211
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZFJGmw8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZirwCggyjQaqPg7dm0OAzfgD2gEoR/058AoI9jLtVd
 JaM9K5RoIu0V1AjBKXQe
 =l+ri
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230503' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20230503
-------------------

- Fixes for : pico-imx6ul, smegw01
- new boards: DMSSE20, Reform 2
- fix: get_boot_device, PLL video rate

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16211
2023-05-03 13:15:12 -04:00
Tom Rini
1807c0c70a Merge branch '2023-05-02-assorted-platform-updates-and-additions'
- Updates for starqltechn and other qualcomm platforms, hi3798mv200,
  Broadcom Northstar, and mediatek platforms
- Drop omap5_uevm, and assorted TI platform updates
- Add MAX14526
2023-05-03 09:23:21 -04:00
Dzmitry Sankouski
8144210e75 starqltechn: enable bootmenu
Needed for multiboot with vendor's Android.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
2023-05-03 09:05:24 -04:00
Dzmitry Sankouski
a2612d7c55 starqltechn: use button keyboard driver
Button keyboard driver used to navigate bootmenu entries.

Add gpio buttons, button keyboard driver.
Add gpio keys dts bindings.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 09:05:24 -04:00
Dzmitry Sankouski
6a0c30610c starqltechn: use 16x32 font
This font is more readable on high ppi display

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-03 09:05:24 -04:00
Yang Xiwen
33f19038cc arm: histb: hi3798mv200: add initial support for Hi3798MV200 HC2910-2AGHD05 board
A board with Hi3798MV200 SoC and various peripherals. Details are in the
board README.md.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
2023-05-03 09:05:24 -04:00
Yang Xiwen
08ad608aa2 dt-binding: histb-clock: add clocks definition for Hi3798MV200
These clocks are found on Hi3798MV200

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
2023-05-03 09:05:24 -04:00
Yang Xiwen
8a5dc8140e mmc: hi6220_dw_mmc: add compatible for HC2910 support
It adds compatible "hisilicon,hi3798mv200-dw-mshc" for HC2910 SoC
Hi3798MV200 to probe this mmc driver.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
2023-05-03 09:05:24 -04:00
Yang Xiwen
e90711f0e9 arm: add support for Hisilicon HiSTB family SoCs
First supported chip is hi3798mv200 (which is similar to Hi3798cv200
used by poplar).

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
2023-05-03 09:05:24 -04:00
Tom Rini
7a3ee61f55 arm: Remove omap5_uevm board
This platform is unsupported by TI and was never widely distributed.  As
this is untested for a long while and missing some DM conversions,
remove it and related device tree files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-03 09:05:24 -04:00
Nitin Yadav
4d03f476a7 arm: mach-k3: Workaround errata ID i2331
Errata doc: https://www.ti.com/lit/pdf/sprz457
Errata ID i2331 CPSW: Device lockup when reading CPSW registers

Details: A device lockup can occur during the second read of any CPSW
subsystem register after any MAIN domain power on reset (POR). A MAIN
domain POR occurs using the hardware MCU_PORz signal, or via software
using CTRLMMR_RST_CTRL.SW_MAIN_POR or CTRLMMR_MCU_RST_CTRL.SW_MAIN_POR.
After these resets, the processor and internal bus structures may get
into a state which is only recoverable with full device reset using
MCU_PORz.
Due to this errata, Ethernet boot should not be used on this device.

Workaround(s): To avoid the lockup, a warm reset should be issued after
a MAIN domain POR and before any access to the CPSW registers. The warm
reset realigns internal clocks and prevents the lockup from happening.
Workaround above errata by calling do_reset() in case of cold boot in
order to trigger warm reset. This needs enabling SYSRESET driver in R5
SPL to enable TI SCI reset driver.

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
2023-05-03 09:05:24 -04:00
Kishon Vijay Abraham I
7bf341ae4d board: ti: j721s2: Add support to detect daughtercards
Add support to detect daughtercards (GESI Ethernet card) in-order
to set the MAC address of the main CPSW2G interface.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2023-05-03 09:05:24 -04:00
Kishon Vijay Abraham I
bd52f45208 configs: j7200_evm_a72: Enhance bootcmd to configure ethernet PHY
Update the default BOOTCOMMAND to provide an automatic and easier way
to configure ethernet PHY before loading the firmware.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2023-05-03 09:05:24 -04:00
Frank Wunderlich
36cbd6b2eb configs: change bpi-r3 to board specific dts and change prompt
Use own devicetree for the board and change the prompt.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2023-05-03 09:05:24 -04:00
Daniel Golle
d7bb109900 board: mediatek: add Bananapi-R3 devicetree
Add board specific devicetree for Bananapi R3 SBC.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2023-05-03 09:05:24 -04:00
Daniel Golle
bcfb23ec7e pinctrl: mediatek: set R1/R0 in case pullen/pullsel succeeded
Commit dafe0fbfb0 ("pinctrl: mediatek: rewrite mtk_pinconf_set and
related functions") changed the logic deciding to set R0 and R1
registers for V1 devices.

Before:
	/* Also set PUPD/R0/R1 if the pin has them */
	err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PUPD, !pullup);
	if (err != -EINVAL) {
		mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_R0, r0);
		mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_R1, r1);
	}

After:
	/* try pupd_r1_r0 if pullen_pullsel return error */
	err = mtk_pinconf_bias_set_pullen_pullsel(dev, pin, disable, pullup,
						  val);
	if (err)
		return mtk_pinconf_bias_set_pupd_r1_r0(dev, pin, disable,
						       pullup, val);

Tracing mtk_pinconf_bias_set_pullen_pullsel shows that the function
always either returns 0 in case of success or -EINVAL in case any error
has occurred. Hence the logic responsible of the decision to program R0
and R1 has been inverted.

This leads to problems on BananaPi R2 (MT7623N) when booting from
SDMMC, it turns out accessing eMMC no longer works since
U-Boot 2022.07:

MT7623> mmc dev 0
Card did not respond to voltage select! : -110

The problem wasn't detected for a long time as both eMMC and SDMMC work
fine if they are used to boot from, and hence R0 and R1 were already
setup by the bootrom and/or preloader.

Fix the logic to restore the originally intended and correct behavior
and also change the descriptive comment accordingly.

Fixes: dafe0fbfb0 ("pinctrl: mediatek: rewrite mtk_pinconf_set and related functions")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
2023-05-03 09:05:24 -04:00
Aradhya Bhatia
28e5e95bf8 arm: mach-k3: am62a7: Enable QoS for DSS
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to 8.

The C7x and VPAC have been overwhelming the DSS's access to the DDR
(when it was accessing via the Non Real-Time (NRT) Queue), primarily
because their functional frequencies, and hence DDR accesses, were
significantly higher than that of DSS. This led the display to flicker
when certain edgeAI models were being run.

With the DSS traffic serviced from the RT queue, the flickering issue
has been found to be mitigated.

The am62a qos files are auto generated from the k3 resource partitioning
tool.

Section-3.1.12, "QoS Programming Guide", in the AM62A TRM[1], provides
more information about the QoS, and section-14.1, "System Interconnect
Registers", provides the register descriptions.

[1] AM62A Tech Ref Manual: https://www.ti.com/lit/pdf/spruj16

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
2023-05-03 09:05:24 -04:00
Manorit Chawdhry
4b6e3d39cf arm: mach-k3: j7200: Fix firewall warnings at boot time
J721E and J7200 have same file j721e_init.c which had the firewall
configs for J721E being applied on J7200 causing the warnings. Split the
firewalls for both the boards to remove those warnings.

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-03 09:05:24 -04:00
Bhupesh Sharma
20cbfd680f board: Fix documentation for Snapdragon based Samsung and Qualcomm boards
The current documentation for Snapdragon based Samsung
and Qualcomm boards is vague in the sense that at one place
it mentions that u-boot  can be used as a replacement for ABL
bootloader and at another it mentions that u-boot is loaded
as an Android boot image through ABL.

Fix the same.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
2023-05-03 09:05:22 -04:00
Bhupesh Sharma
d8c7cc0ee6 board: Fix board file path for sdm845.c for Samsung and Qualcomm boards
Currently a few 'board/qualcomm/../Makefile' point to incorrect
path of sdm845 board file.

Fix the same.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
2023-05-03 09:05:17 -04:00
Manorit Chawdhry
b8ebf24e7f arm: mach-k3: common: don't reconfigure background firewalls
K3 devices have some firewalls set up by ROM that we usually remove so
that the development is easy in HS devices.

While removing the firewalls disabling a background region before
disabling the foreground regions keeps the firewall in a state where all
the transactions will be blacklisted until all the regions are disabled.
This causes a race for some other entity trying to access that memory
region before all the firewalls are disabled and causes an exception.

Since the background regions configured by ROM are in such a manner
that they allow all transactions, don't touch the background regions at
all.

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
2023-05-02 14:24:36 -04:00
Vignesh Raghavendra
fdb051ba3f arm: mach-k3: common: Default to non fitImage boot on HS-FS
Allow non fitImage bootflow on Field Securable (HS-FS) devices in
addition to GP, force fitImage boot only on Security enforced (HS-SE)
devices where signed images are necessary to maintain chain of trust.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
2023-05-02 14:23:59 -04:00
Vladimir Zapolskiy
0e889a7c1b arm: dts: msm: add GENI SE QUP device tree node
On modern Qualcomm platforms including SDM845 a GENI SE QUP IP
description is supposed to be found in board device tree nodes,
the version of the IP is used by the GENI UART driver to properly
set an oversampling divider value, which impacts UART baudrate.

The change touches dragonboard845c and starqltechn board device
tree source files, a device tree node label to "debug" UART is
renamed to 'uart9' according to the naming found in Linux.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
2023-05-02 14:23:59 -04:00
Vladimir Zapolskiy
10ea2a7a93 serial: msm-geni: correct oversampling value based on QUP hardware revision
Starting from QUP v2.5 the value of oversampling is changed from 32
to 16, keeping the old value on newer platforms results on wrong set
UART IP clock divider, thus the asked baudrate does not correspond to
the actually set with all the consequencies for a user.

The change links the driver to a new Qualcomm GENI SE QUP driver
to get its hardware version and update the oversampling value.

Deliberately the code under CONFIG_DEBUG_UART_MSM_GENI is not touched,
since a wanted baudrate can be controlled by setting a modified
CONFIG_DEBUG_UART_CLOCK build time variable.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
2023-05-02 14:23:59 -04:00