Commit graph

2642 commits

Author SHA1 Message Date
Simon Glass
e679f39f7f dtoc: Correct the intarray-widening test case
This case was intended to check that widening an int array with an int
does nothing. Fix it.

Reported-by: Walter Lozano <walter.lozano@collabora.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-08-08 11:27:27 -06:00
Simon Glass
5974718752 patman: Avoid blank lines between tags
In some cases 'patman status' leaves a blank line between the sign-off
and the tags it collects from patchwork. Fix this and add a test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 11:27:27 -06:00
Tom Rini
66217225f7 CI: Update to LLVM-12
The current stable release of LLVM is 12, update to that.  While at it,
fix that we had not correctly upgraded to LLVM 11 previously.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-04 11:30:46 -04:00
Simon Glass
eec44c7218 dtoc: Support widening a bool value
At present if we see 'ranges' property (with no value) we assume it is a
boolean, as per the devicetree spec.

But another node may define 'ranges' with a value, forcing us to widen it
to an int array. At present this is not supported and causes an error.

Fix this and add some test cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
2021-08-01 09:05:24 -06:00
Simon Glass
ca04494d76 dtoc: Fix widening an int array to an int
An int array can hold a single int so we should not need to do anything
in the widening operation. However due to a quirk in the code, an int[3]
widened with an int produced an int[4]. Fix this and add a test.

Fix a comment typo while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
2021-08-01 09:05:24 -06:00
Simon Glass
df82de8051 dtoc: Rename is_wider_than() to reduce confusion
The current name is confusing because the logic is actually backwards from
what you might expect. Rename it to needs_widening() and update the
comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01 09:05:24 -06:00
Simon Glass
ea40b20431 moveconfig: Update to newer kconfiglib
Some of the more advanced features of this tool don't work anymore since
kconfiglib was update. Update the code accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01 09:05:24 -06:00
Simon Glass
5c72c0e0d2 doc: Add docs for the moveconfig tool
Move these docs into htmldocs so they can be read there.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01 09:05:24 -06:00
Patrick Delaunay
a6123333ab patman: add warning for invalid tag
Add a error in patman tool when the commit message contents an invalid
tag "Serie-.*" instead of "Series-.*".

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-01 09:05:24 -06:00
Pali Rohár
3d7b93d51c kwbimage: Update help message about how to extract from an existing image
Extracting is now supported by dumpimage, so mention it in help instead
of `kwbimage -x`.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:59:58 +02:00
Pali Rohár
aa6943ca31 kwbimage: Add support for extracting images via dumpimage tool
The kwbimage library does not support extracting subimages. Implement it.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:59:58 +02:00
Pali Rohár
ad906753c2 tools: kwbimage: Remove v1 kwbimage SPL padding to CONFIG_SYS_U_BOOT_OFFS bytes
This padding depends on board config file and therefore it makes the
mkimage binary tool board specific, which is not correct. One cannot use
mkimage tool built as a result for board A to generate images for board
B, even if both A and B are on the same platform.

This CONFIG_SYS_U_BOOT_OFFS padding was needed when kwbimage v1 contained
SPL code which loaded U-Boot proper based on CONFIG_SYS_U_BOOT_OFFS,
instead of reading correct offset from kwbimage header.

Now that SPL code parses kwbimage header and deterinate correct offset,
there is no need for this CONFIG_SYS_U_BOOT_OFFS padding anymore.

By removing it we also reduce the size of SPL code and therefore also
decrease the final size of v1 kwbimage. This means there is more space
for U-Boot proper binary.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:59:58 +02:00
Pali Rohár
5029d7bf34 tools: kwboot: Fix checking image header version
Function image_version() returns unsigned value, so it can never be
negative. Explicitly check for two supported image versions: v0 and v1.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:49:32 +02:00
Pali Rohár
825a2ca023 tools: kwboot: Check for v1 header size
Too small invalid headers may cause kwboot to crash.
Check for header size of v1 images.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:32 +02:00
Pali Rohár
b943eee915 tools: kwboot: Cosmetic fix - add missing curly brackets
Add missing curly brackets for this else statement.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:32 +02:00
Pali Rohár
49a0a3b8b6 tools: kwboot: Print trailing newline after terminal is terminated
Print trailing newline as the last printed byte can be something
different.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
ec0fe5b84e tools: kwboot: Fix restoring terminal
Call tcsetattr() only if the file descriptor is valid. It may be
invalidated by previous lines (if it is not a tty descriptor).

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
43fef8d4fe tools: kwboot: Fix wrong parameter passed to read()
The 'buf' variable is a pointer and '_buf' is the array itself.
Therefore we should pass sizeof(_buf) instead of sizeof(buf) to read().

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
19a81bdb3e tools: dumpimage: Show error message when trying to extract data from kwbimage
There is no code for extracting data from kwbimage, so show an error
message when user tries this via e.g. dumpimage call:
  ./tools/dumpimage -T kwbimage -o /tmp/out u-boot-spl.kwb

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:49:31 +02:00
Pali Rohár
a18ae18a59 tools: dumpimage: Fix crashing when trying to extract data from kwbimage
Trying to call the following command causes NULL pointer dereference in
strlen():
  ./tools/dumpimage -T kwbimage -o /tmp/out u-boot-spl.kwb

Fix it by checking whether params->imagename is non-NULL before calling
strlen().

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:49:31 +02:00
Pali Rohár
a107c61b41 tools: kwbimage: Mark all BootROM structures __packed
These structures must have specific size without padding, so mark them as
packed via the de-facto standard macro __packed. Also replace PACKED
macro.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:49:31 +02:00
Pali Rohár
b4f3cc2c42 tools: kwbimage: Do not hide usage of secure header under CONFIG_ARMADA_38X
The mkimage host tool can be used to generate kwbimage v1 image with
secure header on host system for A38x plaform also when U-Boot is being
compiled for different platform. So there is no reason to not allow
compiling of mkimage/kwbimage with secure header support for e.g. x86-64
host.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
f63c583f9d tools: kwbimage: Add support for a new DATA_DELAY command
This command is supported only by v1 images and specifies a milliseconds
delay after executing some set of DATA commands. The special string value
SDRAM_SETUP instructs BootROM to setup SDRAM controller instead of
executing delay. SDRAM_SETUP may be specified only once and after the
last DATA command.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
02ba70ad68 tools: kwbimage: Add support for DATA command also for v1 images
The DATA command is already supported by mkimage for v0 images, but not
for v1 images.

BootROM code which executes v1 images also supports DATA command via an
optional extended v1 header OPT_HDR_V1_REGISTER_TYPE.

Implement support for DATA command for v1 images.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
c9b2134b6f tools: kwbimage: Don't parse PAYLOAD keyword
The PAYLOAD keyword does nothing. No code is using it and both mkimage
and kwbimage completely ignore it. It looks like a relict from the past.
The payload image itself can be specified only via -d parameter to
mkimage.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
d9fb82c508 tools: kwbimage: Add support for more BINARY headers
The kwbimage v1 format supports multiple BINARY executable headers.
Add support for it into mkimage/kwbimage tool.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
6458fd4fb1 tools: kwbimage: Fix calculating size of binary header
Binary header consist of:
* 1 byte for header type
* 3 bytes for header size
* 1 byte for number of arguments
* 3 reserved bytes
* N*4 bytes for arguments
* M bytes (aligned to 4 bytes) for executable data
* 1 byte for information about next header
* 3 reserved bytes

The first four bytes are specified as
  sizeof(struct opt_hdr_v1)
and the remaining bytes as
  ALIGN(s.st_size, 4) + (binarye->binary.nargs + 2) * sizeof(uint32_t)

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:49:31 +02:00
Pali Rohár
6c7f152eef tools: kwbimage: Change maximum number of arguments in binary header to 256
The number is stored in one byte, so the maximum should be 255.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31 09:49:31 +02:00
Pali Rohár
cc3443ffa0 tools: kwbimage: Use -a parameter (load address) for v1 images
The data part of v1 kwbimage currently contains U-Boot binary prepended
by 64 bytes long Legacy U-Boot image header. This means that the load
address is currently substracted by 64 bytes to ensure that U-Boot's
entry point is at specified execution address.

As mkimage has already separate arguments for load (-a) and execution
(-e) address, there is no need to derive fixed load address from
execution address.

Therefore remove this load address hack from the kwbimage tool and
support generating v1 kwbimage with arbitrary addresses for load and
execution.

Finally, calculate correct load address by caller for mkimage tool in
Makefile. File u-boot-spl.kwb is always a v1 kwbimage and it is the only
v1 kwbimage which U-Boot's build system generates.

Remove also useless overwriting of destaddr for /binary.0 to the value
which is already set on previous lines.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Marek Behún
35fd1006ae tools: kwbimage: Cosmetic fix - remove redundant space character
Remove this space, since the constants are indented by tabs.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
34dcf952d8 tools: kwbimage: Print size of binary header in kwbimage_print_header()
The binary header in kwbimage contains executable SPL code.

Print information about this binary header and not only information
about it's data part.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
e0c243c398 tools: kwbimage: Validate data checksum of v1 images
The data part of v1 images contains 32-bit checksum after the data.
Validate whether this checksum is correct.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
9380445f65 tools: kwbimage: Validate extended headers of v1 images
Add basic checks for extended headers of v1 images.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
fe2c0e259b tools: kwbimage: Fix check for v0 extended header checksum
Extended header checksum for v0 image is present only in the case when
extended header is present. Skip checksum validation if extended header
is not present.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
4efbf1c327 tools: kwbimage: Don't crash when binary file name does not contain '/'
In the case when the file name is specified relative to the current
working directory, it does not contain '/' character and strrchr()
returns NULL.

The following strcmp() function then crashes on NULL pointer
dereference.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
501a54a29c tools: kwbimage: Fix generation of SATA, SDIO and PCIe images
SATA and SDIO images must be aligned to sector size (which in most cases
is 512 bytes) and Source Address in main header is stored in number of
sectors from the beginning of the drive. SATA image must be stored at
sector 1 and SDIO image at sector 0. Source Address for PCIe image is
not used and must be set to 0xFFFFFFFF.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Marek Behún
bd487ce081 tools: kwbimage: Add constant for SDIO bootfrom
Add constant for SDIO value of the bootfrom header field.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
c934aad06c tools: kwbimage: Align SPI and NAND images to 256 bytes
Writing into SPI NOR and NAND memory can be done only in 256 bytes long
blocks. Align final image size so that when it is burned into SPI NOR or
NAND memory via U-Boot's commands (sf or mtd), we can use the $filesize
variable directly as the length argument.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
37cb9c15d7 tools: kwbimage: Simplify aligning and calculating checksum
The return value of kwbimage_generate() is used for aligning the data
part of kwbimage. Use it for calculating proper 4 byte alignment as is
required by BootROM and also use it for allocating additional 4 bytes
for the 32-bit data checksum.

This simplifies the alignment code to be only at one place (in function
kwbimage_generate) and also simplifies setting checksum as it can be
directly updated in memory.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Pali Rohár
8ab9c6be69 tools: kwbimage: Fix compilation without CONFIG_SYS_U_BOOT_OFFS
The CONFIG_SYS_U_BOOT_OFFS option may be defined as empty string.
In this case it causes compilation error:

    tools/kwbimage.c: In function ‘image_headersz_v1’:
    tools/kwbimage.c:1002:39: error: expected expression before ‘)’ token
      if (headersz > CONFIG_SYS_U_BOOT_OFFS) {
                                           ^
    tools/kwbimage.c:1006:41: error: expected expression before ‘)’ token
        (int)headersz, CONFIG_SYS_U_BOOT_OFFS);
                                             ^
    tools/kwbimage.c:1011:35: error: expected expression before ‘;’ token
      headersz = CONFIG_SYS_U_BOOT_OFFS;
                                       ^
    make[1]: *** [scripts/Makefile.host:112: tools/kwbimage.o] Error 1
    make: *** [Makefile:1822: tools] Error 2

Check whether the value of CONFIG_SYS_U_BOOT_OFFS is really set.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
2021-07-31 09:49:31 +02:00
Simon Glass
333e4a621d Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:27:54 -04:00
Simon Glass
03ebc20de3 binman: Add basic support for debugging performance
One of binman's attributes is that it is extremely fast, at least for a
Python program. Add some simple timing around operations that might take
a while, such as reading an image and compressing it. This should help
to maintain the performance as new features are added.

This is for debugging purposes only.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:35 -06:00
Simon Glass
c31d0cb68c patman: Use bytearray instead of string
If the process outputs a lot of data on stdout this can be quite slow,
since the bytestring is regenerated each time. Use a bytearray instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:35 -06:00
Simon Glass
43332d881b binman: Use bytearray instead of string
This is faster if data is being concatenated. Update the section and
collection etypes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:35 -06:00
Simon Glass
edd4b6ea41 binman: Split node-reading out from constructor in files
The constructor should not read the node information. Move it to the
ReadNode() method instead. This allows this etype to be subclassed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:35 -06:00
Simon Glass
c69d19c8f8 binman: Support multithreading for building images
Some images may take a while to build, e.g. if they are large and use slow
compression. Support compiling sections in parallel to speed things up.

Signed-off-by: Simon Glass <sjg@chromium.org>
(fixed to use a separate test file to fix flakiness)
2021-07-21 10:27:35 -06:00
Simon Glass
650ead1a4a binman: Put compressed data into separate files
At present compression uses the same temporary file for all invocations.
With multithreading this causes the data to become corrupted. Use a
different filename each time.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:35 -06:00
Simon Glass
43ba492670 dtoc: Detect drivers which do not parse correctly
At present if a driver is missing a uclass or compatible stirng, this
is silently ignored. This makes sense in most cases, particularly for
the compatible string, since it is not required except when the driver
is used with of-platdata.

But it is also not very helpful. When there is some sort of problem
with a driver, the missing compatible string (for example) may be the
cause.

Add a warning in this case, showing it only for drivers which are used
by the build.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-07-21 10:27:34 -06:00
Simon Glass
86ff01e890 dtoc: Detect unexpected suffix on .of_match
Some rockchip drivers use a suffix on the of_match line which is not
strictly valid. At present this causes the parsing to fail. Fix this
and offer a warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:34 -06:00
Simon Glass
4f1727a7e3 dtoc: Add a stdout check in test_normalized_name()
This test captures output but does not always check it. Add the missing
code and drop the old comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:34 -06:00