Commit graph

30 commits

Author SHA1 Message Date
Tom Rini
ea92f95d63 Merge branch '2022-07-07-Kconfig-migrations-dead-code-removal' into next
- Migrate more CONFIG options to Kconfig and remove some unused code
  while we're at it.
2022-07-07 14:29:37 -04:00
Joel Stanley
154cffa16a ast2600: Configure u-boot-with-spl.bin target
The normal way of loading u-boot is as a FIT, so configure u-boot.img as
the SPL playload.

The u-boot-with-spl.bin target will add padding according to
CONFIG_SPL_MAX_SIZE which defaults to 64KB on the AST2600.

With this the following simple steps can be used to build and boot a
system:

  make u-boot-with-spl.bin
  truncate -s 64M u-boot-with-spl.bin
  qemu-system-arm -nographic -M ast2600-evb \
    -drive file=u-boot-with-spl.bin,if=mtd,format=raw

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:32:00 -04:00
Joel Stanley
f78a1f2117 config/ast2600: Disable hash hardware accel
The HACE driver lacks support for all the hash types, causing boot to
fail with the default FIT configuration which uses CRC32.

Additionally the Qemu model or the u-boot driver is unable to correctly
compute the SHA256 hash used in a FIT.

Disable HACE by default while the above issues are worked out to enable
boot testing in Qemu.

Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:32:00 -04:00
Joel Stanley
c24129e8b2 config/ast2600: Make position independent
Allows loading one u-boot from another. Useful for testing on hardware.

Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:32:00 -04:00
Joel Stanley
82010a704e config/ast2600: Enable CRC32
Useful for testing images with the default hash type.

Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:32:00 -04:00
Joel Stanley
dc96a8241d config/ast2600: Enable eMMC related boot options
Allow booting zImage from ext4 devices with DOS or UEFI partition
layouts.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:32:00 -04:00
Joel Stanley
f760403f83 config/aspeed: Enable EEPROM options
To allow testing of the I2C driver, enable the eprom command and the
misc driver.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:31:29 -04:00
Joel Stanley
93330f2823 config/ast2600: Enable I2C driver
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:30:51 -04:00
Tom Rini
5c873269fc Merge branch '2022-06-28-Kconfig-migrations' into next
- Convert a large number of CONFIG symbols to Kconfig.  Of note is a
  large chunk of USB symbols (and dead code removal), ensuring all
  SPL/TPL/VPL symbols have an appropriate dependency, largely (but not
  entirely) removing the testing of CONFIG_SPL_BUILD in board headers,
  and allowing CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS to
  co-exist as this facilities migration of many platforms.
2022-06-29 10:11:21 -04:00
Chia-Wei Wang
442a69c143 configs: ast2600: Move SPL bss section to DRAM space
The commit b583348ca8 ("image: fit: Align hash output buffers") places
the hash output buffer at the .bss section. However, AST2600 by default
executes SPL in the NOR flash XIP way. This results in the hash output
cannot be written to the buffer as it is located at the R/X only region.

We need to move the .bss section out of the SPL body to the DRAM space,
where hash output can be written to. This patch includes:
 - Define the .bss section base and size
 - A new SPL linker script is added with a separate .bss region specified
 - Enable CONFIG_SPL_SEPARATE_BSS kconfig option

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
2022-06-22 21:30:05 -04:00
Rasmus Villemoes
26f981f295 fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ
Asking if the alias we found actually points at the device tree node
we passed in (in the guise of its offset from blob) can be done simply
by asking if the fdt_path_offset() of the alias' path is identical to
offset.

In fact, the current method suffers from the possibility of false
negatives: dtc does not necessarily emit a phandle property for a node
just because it is referenced in /aliases; it only emits a phandle
property for a node if it is referenced in <angle brackets>
somewhere. So if both the node we passed in and the alias node we're
considering don't have phandles, fdt_get_phandle() returns 0 for both.

Since the proper check is so simple, there's no reason to hide that
behind a config option (and if one really wanted that, it should be
called something else because there's no need to involve phandle in
the check).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
2022-06-06 18:01:21 -04:00
Tom Rini
9b5f9aeb3b Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_BSS_MAX_SIZE
   CONFIG_SPL_MAX_FOOTPRINT

Note that the da850evm platforms were violating the "only use one" rule
here, and so now hard-code their BSS limit.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:10 -04:00
Tom Rini
d31466b382 Convert CONFIG_SYS_CBSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
d0ee7f295d Convert CONFIG_SYS_PBSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
c0a1409d21 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-23 13:56:21 -04:00
Tom Rini
d46e86d25c configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 13:36:51 -04:00
Andrew Jeffery
14d8610090 configs: evb-ast2[56]00: Enable GPIO control
Build in the driver for the Aspeed GPIO controller and turn on the
`gpio` shell command.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2022-03-07 11:36:12 -05:00
Tom Rini
a542e4307d Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_MAY_FAIL
   CONFIG_BOOTP_VENDOREX
   CONFIG_BOOTP_BOOTFILESIZE
   CONFIG_BOOTP_NISDOMAIN
   CONFIG_BOOTP_TIMEOFFSET

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Dylan Hung
0810de5769 configs: ast2600: enable DM_MDIO and MDIO driver
Enable DM_MDIO and Aspeed MDIO driver for AST2600 EVB.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-18 12:48:17 -05:00
Tom Rini
5e2fd60b97 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:19 -05:00
Chia-Wei Wang
e3cdc2cbb1 configs: ast2600: Boot kernel FIT in DRAM
AST2600 leverages the FIT hash/signature verification to fulfill
secure boot trust chain. To improve the performance and save SW
code size for those crypto operations, the two HW crypto engine,
HACE and ACRY, are enabled.

However, both of the engines can only access to data stored in
DRAM space. Therefore, we need to move the FIT image into DRAM
before the booting.

This patch update the CONFIG_BOOTCOMMAND to execute the pre-defined
ENV variable which consists of FIT image copy to memory and booting.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2021-11-17 17:05:57 -05:00
Chia-Wei Wang
ddd778aebe configs: ast2600-evb: Enable SPL FIT support
Enable SPL FIT image load and verification support.
The HW accelerated SHA is also available with the
newly added support of the HACE HW hash engine.

The SPL thumb build is also enabled to keep the binary
less than 64KB to fit into the Aspeed secure boot design.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
2021-11-17 17:05:57 -05:00
Tom Rini
9802154a94 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
Simon Glass
2a73606668 serial: Rename SERIAL_SUPPORT to SERIAL
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04 12:26:01 -04:00
Tom Rini
7cfbba36e9 Convert CONFIG_SYS_MALLOC_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MALLOC_LEN

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-31 17:47:49 -04:00
Tom Rini
49c8ef0e45 Convert CONFIG_SYS_LOAD_ADDR to Kconfig
Now that we have consistent usage, migrate this symbol to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-31 17:46:37 -04:00
Tom Rini
3e5b62f788 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-10 15:08:46 -04:00
Tom Rini
2bba78076b configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 10:17:29 -04:00
Tom Rini
838157d02e configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-11 12:19:09 -04:00
Chia-Wei, Wang
ccdb58dc0a configs: aspeed: Add defconfig for AST2600 EVB
Add the default configuration for the AST2600 EVB.

Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2021-01-18 15:23:06 -05:00