Commit graph

8 commits

Author SHA1 Message Date
Wolfgang Denk
a9905db5d2 MPC512x: Add MSCAN1...4 Clock Control Registers
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:01:32 +02:00
Stefan Roese
6bd55cc65d mcp512x: Add macros for SCFR LPC divisor access
Thos macros will be used by the esd mecp5123 board.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:47:19 +02:00
Wolfgang Denk
3b74e7ec58 MPC512x: remove include/mpc512x.h
Move needed definitions (register descriptions etc.) from
include/mpc512x.h  into  include/asm-ppc/immap_512x.h.

Instead of using a #define'd register offset, use a function that
provides the PATA controller's base address.

All the rest of include/mpc512x.h are register offset definitions
which can be eliminated by proper use of C structures.

There are only a few register offsets remaining that are needed in
cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h
which is intended as a temporary workaround only. In a later patch
this file will be removed, too, and then auto-generated from the
respective C structs.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Wolfgang Denk
19dc7e1792 MPC512x: add more hardware description to immap_512x.h
- add GPIO module description
- add Address Latch Timing Register description
- add IO Control Memory Map
- add FEC Memory Map

Also change board/freescale/mpc5121ads/mpc5121ads.c and
cpu/mpc512x/iopin.c as needed.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Ralph Kondziella
70a4da45e1 ADS5121 Add PATA support
Original patch from Ralph Kondziella
plus clean up by Wolfgang Denk
plus changes by John Rigby
    use ips clock not lpc
    port forward to current u-boot release

Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: John Rigby <jrigby@freescale.com>
2009-02-03 15:40:29 -07:00
Martha Marx
abfbd0ae49 ADS5121 Add IC Ident Module (IIM) support
IIM (IC Identification Module) is the fusebox for the mpc5121.
Use #define CONFIG_IIM to turn on the clock for this module
use #define CONFIG_CMD_FUSE to add fusebox commands.
Fusebox commands include the ability to read
the status, read the register cache, override the register cache,
program the fuses and sense them.

Signed-off-by: Martha Marx <mmarx@silicontkx.com>
Signed-off-by: John Rigby <jrigby@freescale.com>
2009-02-03 15:40:20 -07:00
John Rigby
5f91db7f58 MPC5121e ADS PCI support take 3
Adds PCI support for MPC5121

Tested with drivers/net/rtl8139.c

Support is conditional since PCI on old silicon does not work.

ads5121_PCI_config turns on PCI

In this version, condition compilation of PCI code has been moved
from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
suggested by Jean-Christophe PLAGNIOL-VILLARD

Signed-off-by: John Rigby <jrigby@freescale.com>
2008-03-02 21:44:59 +01:00
Rafal Jaworowski
8993e54b6f [ADS5121] Support for the ADS5121 board
The following MPC5121e subsystems are supported:

- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
2007-07-27 14:43:59 +02:00