Commit graph

10 commits

Author SHA1 Message Date
Poonam Aggrwal
3b1f243b8d 85xx: Added CONFIG_MAX_CPUS for P1020
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:41 -05:00
Poonam Aggrwal
0e870980a6 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
The number of CPUs are getting detected dynamically by checking the
processor SVR value.  Also removed CONFIG_NUM_CPUS references from all
the platforms with 85xx/86xx processors.

This can help to use the same u-boot image across the platforms.

Also revamped and corrected few Freescale Copyright messages.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Peter Tyser
f732a7598f ppc: Fix compile error for boards with CONFIG_DDR_ECC
A bug was introduced by commit e94e460c6e
which affected non-MPC83xx/85xx/86xx ppc boards which had CONFIG_DDR_ECC
defined and resulted in errors such as:

Configuring for canyonlands board...
fsl_dma.c:50:2: error: #error "Freescale DMA engine not supported on your
processor"
make[1]: *** No rule to make target `.depend', needed by `libdma.a'.  Stop.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-17 23:44:42 +02:00
Peter Tyser
e94e460c6e 83xx: Add support for fsl_dma driver
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu>
Tested-by: Ira W. Snyder <iws@ovro.caltech.edu>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-02 11:15:57 -05:00
Peter Tyser
017f11f68e 8xxx: Break out DMA code to a common file
DMA support is now enabled via the CONFIG_FSL_DMA define instead of the
previous CONFIG_DDR_ECC

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:01:51 -05:00
Becky Bruce
bd76729bcb MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
Currently, we get 256MB as the default, but since all the 86xx
board configs define a 2G BAT mapping for RAM, raise default
to 2G.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
2009-02-23 22:50:05 +01:00
Kumar Gala
f8523cb081 85xx: Fix how we map DDR memory
Previously we only allowed power-of-two memory sizes and didnt
handle >2G of memory.  Now we will map up to CONFIG_MAX_MEM_MAPPED
and should properly handle any size that we can make in the TLBs
we have available to us

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-16 18:05:51 -06:00
Stefan Roese
2ede879fcb ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h
CONFIG_SDRAM_PPC4xx_IBM_DDR2 is not set when include/asm-ppc/config.h is
included. So for katmai, CONFIG_MAX_MEM_MAPPED will get set to 256MB.

It makes perfect sense to set CONFIG_MAX_MEM_MAPPED to 2GB for all PPC4xx
boards right now.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-12 06:08:07 +01:00
Kumar Gala
87c9063963 ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h
Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent
between the two current users (lib_ppc/board.c, 44x SPD DDR2).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
2009-02-10 00:44:13 +01:00
Kumar Gala
47d41cc3a1 Add an architecture specific config.h for common defines
We have common defines that we duplicate in various ways.  Having an
arch specific config.h gives us a common location for those defines.

Eventually we should be able to replace this when we have proper
Kconfig support.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-10 00:43:54 +01:00