Commit graph

51 commits

Author SHA1 Message Date
Simon Glass
93b1965322 Makefile: Only build dtc if needed
At present U-Boot always builds dtc if CONFIG_OF_CONTROL is defined, even
when DTC is provided. The built dtc is not actually used, so this is a
waste of time.

Update the Makefile logic to build dtc only if one is not provided to the
build with the DTC variable. Add documentation to explain this.

This saves about 3.5 seconds of elapsed time on a clean build of
sandbox_spl for me.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-19 11:23:07 -04:00
Ilias Apalodimas
d6f8ab30a2 treewide: Remove OF_PRIOR_STAGE
The previous patches removed OF_PRIOR_STAGE from the last consumers of the
Kconfig option.  Cleanup any references to it in documentation,  code and
configuration options.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-18 13:19:50 -04:00
Ilias Apalodimas
2e8d2f8843 riscv: Remove OF_PRIOR_STAGE from RISC-V boards
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
introduced,  in order to support a DTB handed over by an earlier stage boo
loader.  However we have another option in the Kconfig (OF_BOARD) which has
identical semantics.

On RISC-V some of the boards pick up the DTB from a1 and copy it in their
private gd_t.  Apart from that they copy it to prior_stage_fdt_address,  if
the Kconfig option is selected, which is unnecessary.

So let's switch the config option for those boards to OF_BOARD and define
the required board_fdt_blob_setup() for them.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-18 13:19:50 -04:00
Simon Glass
414cc15144 treewide: Simply conditions with the new OF_REAL
Use this new Kconfig to simplify the compilation conditions where
appropriate.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Simon Glass
eaad01a3d0 fdt: Create a new OF_REAL Kconfig
The condition to indicate whether there is a runtime devicetree available
is OF_CONTROL && !OF_PLATDATA. This is a bit unweidly and is repeated in
a lot of places.

Add a new OF_REAL Kconfig which provides this information directly.

Note: This is similar in effect to LIBFDT. We might consider dropping
LIBFDT and using this instead, but this is left for now as we also have
OF_LIBFDT_OVERLAY which it would not make sense to change.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Bin Meng
31eefd4380 binman: Support packaging U-Boot for scenarios like OF_BOARD or OF_PRIOR_STAGE
For scenarios like OF_BOARD or OF_PRIOR_STAGE, no device tree blob is
provided in the U-Boot build phase hence the binman node information
is not available. In order to support such use case, a new Kconfig
option BINMAN_STANDALONE_FDT is introduced, to tell the build system
that a device tree blob containing binman node is explicitly required
when using binman to package U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-19 17:01:50 +08:00
Simon Glass
ab933d8026 dm: core: Create a struct for device runtime info
At present when driver model needs to change a device it simply updates
the struct udevice structure. But with of-platdata-inst most of the fields
are not modified at runtime. In fact, typically only the flags need to
change.

For systems running SPL from read-only memory it is convenient to separate
out the runtime information, so that the devices don't need to be copied
before being used.

Create a new udevice_rt table, similar to the existing driver_rt. For now
it just holds the flags, although they are not used in this patch.

Add a new Kconfig for the driver_rt data, since this is not needed when
of-platdata-inst is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:09 +13:00
Simon Glass
95a5825f31 dm: core: Add an option to support SPL in read-only memory
Some systems (e.g. x86 APL) run SPL from read-only memory. The device
instances created by dtoc are therefore not writeable. To make things work
we would need to copy the devices to read/write memory.

To avoid this, add an option to use a separate runtime struct for devices,
just as is done for drivers. This can be used to hold information that
changes at runtime, avoiding the need for a copy.

Also add a Kconfig option for read-only SPL, which selects this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:09 +13:00
Simon Glass
1ef3af3b27 dm: core: Allow dropping run-time binding of devices
With OF_PLATDATA_INST devices are bound at build time. We should not need
binding of devices at runtime in most cases. However it is inflexible to
absolutely prohibit it, so add an option to control this.

Update the driver model core so that it does not bind devices. Update
device_bind() to return an error if called.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:28 +13:00
Simon Glass
5a1b25c201 dm: of-platadata: Add option for device instantiation
Add Kconfig options to support build-time device instantiation. When
fully implemented, this will allow dtoc to create U-Boot devices (i.e.
struct udevice records) at build time, thus reducing code space in
SPL.

For now this defaults to off, but will be enabled when the rest of
the implementation is in place.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:27 +13:00
Bin Meng
ced4c31e93 dts: Fix OF_LIVE dependency
lib/of_live.c references the following 2 ofnode APIs:
of_alias_scan() and of_get_property().

These APIs get built only when DM is on. Fix the dependency then.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03 19:17:25 -07:00
Simon Glass
20e442ab2d dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO()
The current macro is a misnomer since it does not declare a device
directly. Instead, it declares driver_info record which U-Boot uses at
runtime to create a device.

The distinction seems somewhat minor most of the time, but is becomes
quite confusing when we actually want to declare a device, with
of-platdata. We are left trying to distinguish between a device which
isn't actually device, and a device that is (perhaps an 'instance'?)

It seems better to rename this macro to describe what it actually is. The
macros is not widely used, since boards should use devicetree to declare
devices.

Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is
declaring a new driver_info record, not a device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
e41651fffd dm: Support parent devices with of-platdata
At present of-platdata does not provide parent information. But this is
useful for I2C devices, for example, since it allows them to determine
which bus they are on.

Add support for setting the parent correctly, by storing the parent
driver_info index in dtoc and reading this in lists_bind_drivers(). This
needs multiple passes since we must process children after their parents
already have been bound.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Simon Glass
1fa057be4a Kconfig: Create a new tools menu
At present MKIMAGE_DTC_PATH is in the devicetree menu but not within
'devicetree control' since it does not relate to that. As a result it
shows up in the top menu.

It actually relates to the mkimage tool, so create a new tools menu for it
and move it there.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09 12:02:26 -04:00
Anatolij Gustschin
43b6e38b27 dts: add property removal option CONFIG_OF_REMOVE_PROPS
This can be used for device tree size reduction similar as
CONFIG_OF_SPL_REMOVE_PROPS option. Some boards must pass the
built-in DTB unchanged to the kernel, thus we may not cut it
down unconditionally. Therefore enable the property removal
list option only if CONFIG_OF_DTB_PROPS_REMOVE is selected.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-27 19:54:20 -05:00
Sean Anderson
327bb3bc1e Add dependencies for MALLOC_F and OF_LIBFDT
Some features implicitly depended on MALLOC_F and OF_LIBFDT and would
fail at link-time if these features were not enabled.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15 19:50:31 -05:00
Jean-Jacques Hiblot
557bc97fe8 dts: Add support for adding DT overlays in u-boot.img
If u-boot.img is a FIT image, CONFIG_OF_OVERLAY_LIST can be used to add
DT overlays to u-boot.img.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 11:13:24 -05:00
Baruch Siach
574e38618b dts: fix MULTI_DTB_FIT compression choice prompt
This choice is not about SPL for which we have a separate choice.

Fixes: 95f4bbd581 ("lib: fdt: Allow LZO and GZIP DT compression in U-Boot")
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-10-31 07:22:53 -04:00
Walter Lozano
c9acae3396 dts: Kconfig: Fix help for SPL_OF_CONTROL
As initially this feature was implemented as a negative CONFIG and
later it was redesigned to be positive the help text should be
updated to reflect this change.

This commit updates the help text to match the current implementation.

Signed-off-by: Walter Lozano <wlozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-30 17:48:47 -04:00
Michal Simek
f00d89fd50 dm: Also remove interrupts property from SPL DT
interrupt-parent property is removed already that's why there is no
reason to keep interrupts property if parent doesn't exist.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-11 20:10:05 -06:00
Marek Vasut
95f4bbd581 lib: fdt: Allow LZO and GZIP DT compression in U-Boot
Add required Kconfig symbols, Makefile bits and macro fixes in a
few places to support LZO and DT compression in U-Boot. This can
save a lot of space with multi-DTB fitImages.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-04-09 18:19:10 +02:00
Simon Goldschmidt
3600b46117 of-platdata: improve documentation
Improve some things in the documentation of OF_PLATDATA that I found
while porting socfgpa_gen5 to it.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-09 12:50:22 -07:00
Michal Simek
4adc6605a9 dts: Fix typo in OF_LIVE Kconfig help
Fix typo in Kconfig description.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-17 09:22:35 -04:00
Michal Simek
b8448051df Kconfig: Remove trailing whitespaces in prompt
Remove additional trailing whitespaces in prompt reported by kconfiglib:

warning: DM_PMIC_SANDBOX (defined at drivers/power/pmic/Kconfig:133) has
leading or trailing whitespace in its prompt
warning: <choice> (defined at dts/Kconfig:204) has leading or trailing
whitespace in its prompt

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Felix Brack <fb@ltec.ch>
2018-07-30 07:18:46 -04:00
Thomas Fitzsimmons
894c3ad27f board: arm: Add support for Broadcom BCM7445
Add support for loading U-Boot on the Broadcom 7445 SoC.  This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.

Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-07-10 16:55:57 -04:00
Masahiro Yamada
d6a0c78a4e pylibfdt: compile pylibfdt only when dtoc/binman is necessary
Currently, pylibfdt is always compiled if swig is installed on your
machine.  It is really annoying because most of targets (excepts
x86, sunxi, rockchip) do not use dtoc or binman.

"checkbinman" and "checkdtoc" are wrong.  It is odd that the final
build stage checks if we have built necessary tools.  If your platform
depends on dtoc/binman, you must be able to build pylibfdt.  If swig
is not installed, it should fail immediately.

I added PYLIBFDT, DTOC, BINMAN entries to Kconfig.  They should be
property select:ed by platforms that need them.  Kbuild will descend
into scripts/dtc/pylibfdt/ only when CONFIG_PYLIBFDT is enabled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-17 07:43:32 -05:00
Jean-Jacques Hiblot
2f57c95100 spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
u-boot can be embedded within a FIT image with multiple DTBs. It then
selects at run-time  which one is best suited for the platform.
Use the same principle here for the SPL: put the DTBs in a FIT image,
compress it (LZO, GZIP, or no compression) and append it at the end of the
SPL.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
[trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the
default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c
it's unused.]
Signed-off-by Tom Rini <trini@konsulko.com>
2017-10-06 11:26:41 -04:00
Jean-Jacques Hiblot
11955590a2 dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig
CONFIG_FIT_EMBED might be confused with CONFIG_OF_EMBED, rename it
MULTI_DTB_FIT as it is able to get a DTB from a FIT image containing
multiple DTBs. Also move the option to the Kconfig dedicated to the DTS
options and create a README for this feature.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Tom Rini
1f6049e250 tools/mkimage: Make the path to the dtc binary that mkimage calls configurable
In some cases, such as FreeBSD, the path to an alternative dtc needs to
be used.  Rather than override the one given in the Makefile on the
command line, make this part of the build configuration.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-24 07:33:03 -04:00
Tom Rini
36dd5f1b8a dtc: Switch to building and using our own dtc unless provided
This makes us act like the Linux Kernel does and allow for dtc to be
provided externally but otherwise we use the version of dtc that is
included in the sources.  This in turn means that we can drop the
checkdtc logic.  We select DTC in the cases where we will need the dtc
tool provided.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-24 07:32:24 -04:00
Philipp Tomsich
f291ce1298 spl: dm: Kconfig: split OF_CONTROL and OF_PLATDATA between SPL and TPL
For the RK3368, we want to use OF_PLATDATA in TPL, but full OF_CONTROL
in SPL: this requires the introduction of a new family of
configuration options to decouple SPL_OF_CONTROL and SPL_OF_PLATDATA
from TPL.

Consequently, Makefile.spl needs to be adjusted to test for these
configuration items through the $(SPL_TPL_) macro instead of
hard-coding the SPL variant.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 17:12:20 +02:00
Cooper Jr., Franklin
d97974099b dts: Allow OF_LIST to depend on FIT_EMBED
OF_LIST will be useable by SPL and U-boot. Therefore, update its
dependency to allow it to be enable by either SPL or U-boot specific
config option.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
2017-07-10 14:25:53 -04:00
Simon Glass
5e060d8bcc dm: core: Add livetree definitions
Add a Kconfig option to enable a live device tree, built at run time from
the flat tree. Also add structure definitions and a root node.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:06 -06:00
Alex Deymo
82f766d1d2 Allow boards to initialize the DT at runtime.
In some boards like the Raspberry Pi the initial bootloader will pass
a DT to the kernel. When using U-Boot as such kernel, the board code in
U-Boot should be able to provide U-Boot with this, already assembled
device tree blob.

This patch introduces a new config option CONFIG_OF_BOARD to use instead
of CONFIG_OF_EMBED or CONFIG_OF_SEPARATE which will initialize the DT
from a board-specific funtion instead of bundling one with U-Boot or as
a separated file. This allows boards like the Raspberry Pi to reuse the
device tree passed from the bootcode.bin and start.elf firmware
files, including the run-time selected device tree overlays.

Signed-off-by: Alex Deymo <deymo@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 20:35:06 -04:00
Vikas Manocha
239ae4a912 dm: avoid dropping pin control DT properties in case of SPL_PINCTRL
This patch replaces SPL_PINCTRL_FULL with SPL_PINCNTRL. It is to avoid removal
of pin control properties in case of SPL_PINCTRL. No impact in case of
SPL_PINCTRL_FULL as it depends on SPL_PINCTRL.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-04 20:15:10 -06:00
mario.six@gdsys.cc
2a792753d6 dm: Add callback to modify the device tree
Certain boards come in different variations by way of utilizing daughter
boards, for example. These boards might contain additional chips, which
are added to the main board's busses, e.g. I2C.

The device tree support for such boards would either, quite naturally,
employ the overlay mechanism to add such chips to the tree, or would use
one large default device tree, and delete the devices that are actually
not present.

Regardless of approach, even on the U-Boot level, a modification of the
device tree is a prerequisite to have such modular families of boards
supported properly.

Therefore, we add an option to make the U-Boot device tree (the actual
copy later used by the driver model) writeable, and add a callback
method that allows boards to modify the device tree at an early stage,
at which, hopefully, also the application of device tree overlays will
be possible.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23 15:46:23 +01:00
Simon Glass
2789ddb9d5 dm: Add an option to enable the of-platdata feature
Add a Kconfig option to enable this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Michal Simek
c409bd015c spl: Setup default value for OF_LIST
OF_LIST can't remain empty that's why setup it up to default DTB.

If it is empty u-boot.img is created without FDT partition:
For example:
  ./tools/mkimage -f auto -A arm -T firmware -C none -O u-boot -a
0x8000000 -e 0 -n "U-Boot 2016.05-rc3 ..." -E -b  -d u-boot-nodtb.bin u-boot.img
Can't set 'timestamp' property for '' node (FDT_ERR_NOSPACE)
FIT description: Firmware image with one or more FDT blobs
Created:         Wed May  4 15:02:52 2016
 Image 0 (firmware@1)
  Description:  U-Boot 2016.05-rc3-00080-gff2e12ae22a8-dirty for zynqmp
board
  Created:      Wed May  4 15:02:52 2016
  Type:         Firmware
  Compression:  uncompressed
  Data Size:    unavailable
  Architecture: ARM
  Load Address: 0x08000000
 Default Configuration: 'conf@1'
 Configuration 0 (conf@1)
  Description:  unavailable
  Kernel:       unavailable

And then image like this doesn't contain description and link to FDT and
can't boot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-23 11:50:21 -04:00
Simon Glass
cdf172461c spl: Add a way to specify a list of device trees to include
When building a FIT, more than one device tree can be included. The board
can select (at run-time) the one that it wants.

Add a Kconfig option to allow the list of devices trees (supported by the
board) to be specified.

When using SPL_LOAD_FIT, build u-boot.img in FIT format instead of the
legacy image format. Include all the listed device tree files in this FIT.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 19:18:31 -04:00
Simon Glass
70d41093c5 fdt: Adjust DEFAULT_DEVICE_TREE to device on OF_CONTROL
This option has no meaning without OF_CONTROL, so add a dependency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 19:18:25 -04:00
Masahiro Yamada
5f3f7b79db dts: keep clock-names and clocks in SPL DTB if SPL_CLK is enabled
These two properties are necessary for SPL to get clocks from DT.

Note:
For now, only clock look-up by index is supported (clk_get_by_index()
function), so "clock-names" is never parsed in U-Boot.  However, we
may want to support something like clk_get_by_name() in the future,
so let's keep "clock-names" as well as "clocks".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-24 20:06:19 -08:00
Simon Glass
3d3f60cb7a dts: Add a comment about CONFIG_OF_EMBED being for local use
This comment from README.fdt-control did not end up in the Kconfig, which
is what most people will see. Add it with a few tweaks.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-10-03 14:29:16 +01:00
Masahiro Yamada
6aa8179f81 dts: do not cut down pinctrl-0 and pinctrl-names for SPL full-pinctrl
These properties are necessary to use full-featured pinctrl drivers
in SPL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:45:12 -06:00
Masahiro Yamada
897705ec39 dts: fix dependency of OF_SPL_REMOVE_PROPS
This should depend on SPL_OF_CONTROL (it is not equivalent to
SPL && OF_CONTROL).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-31 07:57:29 -06:00
Masahiro Yamada
dffb86e468 of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL
As we discussed a couple of times, negative CONFIG options make our
life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ...
and here is another one.

Now, there are three boards enabling OF_CONTROL on SPL:
 - socfpga_arria5_defconfig
 - socfpga_cyclone5_defconfig
 - socfpga_socrates_defconfig

This commit adds CONFIG_SPL_OF_CONTROL for them and deletes
CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert
the logic.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:04 -04:00
Simon Glass
fa78e0a371 dm: Reduce SPL device tree size
The SPL device tree size must be minimised to save memory. Only include
properties that are needed by SPL - this is determined by the presence
of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of
unused properties from the nodes that remain.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:21 -06:00
Simon Glass
2860f03b91 fdt: Add an option to disable device tree in SPL
Some boards cannot support device tree due to lack of memory. Add an option
to allow these boards to continue to work (and even use driver model).
This is a 'negative' option since most boards are expected to support device
tree in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23 09:05:54 -06:00
Masahiro Yamada
d648964fc2 kconfig: remove unneeded dependency on !SPL_BUILD
Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-24 17:06:27 -05:00
Robert P. J. Day
5699ea6d0e Correct two non-functional misspellings "overrided".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2014-10-27 17:54:11 -04:00
Masahiro Yamada
f1ef2b6233 kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig
This option specifies the default Device Tree used for the run-time
configuration of U-Boot.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Michal Simek <michal.simek@xilinx.com>
2014-09-25 09:31:24 -04:00