Commit graph

94 commits

Author SHA1 Message Date
Mike Frysinger
dae2242ada Blackfin: add in/out le32 variants
These are rarely used, but the post code does currently, so add small
redirect hacks for that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:03:25 -05:00
Mike Frysinger
8e5c1edadf Blackfin: define CONFIG_SYS_CACHELINE_SIZE
Common U-Boot API wants this define, so import asm/cache.h from Linux
to provide suitable defines.

Acked-by: Anton Staaf <robotboy@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-16 14:22:19 -04:00
Mike Frysinger
476af299b0 image: push default arch values to arch headers
This pushes the ugly duplicated arch ifdef lists we maintain in various
image related files out to the arch headers themselves.

Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:15 +02:00
Valentin Longchamp
79843950b2 POST: add post_log_res field for post results in global data
The current post_log_word in global data is currently split into 2x
16 bits: half for the test start, half for the test success.
Since we alredy have more than 16 POST tests defined and more could
be defined, this may result in an overflow and the post_output_backlog
would not work for the tests defined further of these 16 positions.

An additional field is added to global data so that we can now support up
to 32 (depending of architecture) tests. The post_log_word is only used
to record the start of the test and the new field post_log_res for the
test success (or failure). The post_output_backlog is for this change
also adapted.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2011-10-05 22:03:10 +02:00
Graeme Russ
9558b48af0 console: Implement pre-console buffer
Allow redirection of console output prior to console initialisation to a
temporary buffer.

To enable this functionality, the board (or arch) must define:
 - CONFIG_PRE_CONSOLE_BUFFER - Enable pre-console buffer
 - CONFIG_PRE_CON_BUF_ADDR - Base address of pre-console buffer
 - CONFIG_PRE_CON_BUF_SZ - Size of pre-console buffer (in bytes)

The pre-console buffer will buffer the last CONFIG_PRE_CON_BUF_SZ bytes
Any earlier characters are silently dropped.
2011-10-05 22:03:09 +02:00
Mike Frysinger
2151374fa6 Blackfin: post: generalize led/button tests with GPIOs
Make it easy for any Blackfin board to enable led/push button tests.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-09-29 16:38:05 -04:00
Mike Frysinger
bc9c64273d Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:46 -04:00
Mike Frysinger
f75e8b32ad Blackfin: portmux: allow header to be included in assembly files
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
7ed998f629 Blackfin: sync MMR read/write helpers with Linux
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
95b4b9d97a Blackfin: gpio: optimize free path a little
When we aren't doing resource tracking, the gpio_free() function is a
stub that simply returns, so pull this logic up a level and make it an
inline stub in the header.  Now we don't have to waste time at any of
the call sites.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
272d2fc2f5 Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR
Set the default post word location to an L1 data location for all
Blackfin parts so things "just work" for most people.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-12 02:17:45 -04:00
Mike Frysinger
a972b8d701 gpio: generalize for all generic gpio providers
The Blackfin gpio command isn't terribly Blackfin-specific.  So generalize
the few pieces into two new optional helpers:
	name_to_gpio() - turn a string name into a GPIO #
	gpio_status() - display current pin bindings (think /proc/gpio)

Once these pieces are pulled out, we can relocate the cmd_gpio.c into the
common directory.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 15:56:51 -04:00
Mike Frysinger
e8065f8889 Blackfin: bootrom.h: sync with toolchain
We need the updated LDR bit defines for our LDR utils.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
164d04f4fc Blackfin: BF537: unify duplicated headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
b0c5f1cb72 Blackfin: BF52x: unify duplicated headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
0807fe0a49 Blackfin: drop duplicate system mmr and L1 scratch defines
Common code already takes care of setting up these defines when a port
hasn't specified them, so punt the duplicate values.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
cca07417d5 Blackfin: BF50x: new processor port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
5a9a2c55d1 Blackfin: fix bd_t handling
The recent global data changes (making the size autogenerated) broke the
board info handling on Blackfin ports as we were lying and lumping the
bd_t size in with the gd_t size.  So use the new dedicated bd_t size to
setup its own address in memory.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
704f1f0c20 Blackfin: bf537: fix L1 data defines
The __BFIN_DEF_ADSP_BF537_proc__ define isn't setup anymore, so use
the one coming from the compiler.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
fbcf8e8c75 Blackfin: move CONFIG_BFIN_CPU back to board config.h
This is a revert of 821ad16fa9 as Wolfgang doesn't like the new code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Wolfgang Denk
3388db2cd7 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2010-10-29 21:46:08 +02:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
Mike Frysinger
1fde3eb2d3 Blackfin: fix building after asm-offsets.h intro
Since some of the defines in our config.h use the generated defines, we
need to include the generated header.  This fixes building of the Blackfin
start.S file (where the stack is setup).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-27 21:10:58 -04:00
Wolfgang Denk
25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00
Mike Frysinger
e5d8984be6 Blackfin: update anomaly lists to latest sheets
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-14 20:23:26 -04:00
Mike Frysinger
821ad16fa9 Blackfin: move CONFIG_BFIN_CPU to board config.mk
The CONFIG_BFIN_CPU option is largely used in the build system, so move
it out of the board config.h and into the board config.mk.  It'd be nice
to keep everything in the config.h, but the patch to extract that value
early was rejected.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
543ef36586 Blackfin: bf561: merge headers
Only the BF561 port was using the common dual core headers, so merge them
into the BF561 specific headers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
c489762ac2 Blackfin: bf533: merge headers
Only the BF533 port was using the common extended headers, so merge them
into the BF533 specific headers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
9615398dc2 Blackfin: unify core MMRs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
aa79cbbf27 Blackfin: bf52x: unify arch header duplication
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
9d291d816b Blackfin: bf537: unify arch header duplication
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
94e3e444de Blackfin: punt old *p style volatile MMR defines
These are unused now, so punt them to clean things up.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:38 -04:00
Mike Frysinger
f47a5a83a2 Blackfin: punt headers for non-existent BF541
There is no BF541 processor variant, so punt headers for it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:37 -04:00
Mike Frysinger
6f070e1867 Blackfin: bfin_spi: add optional DMA support
This moves the last piece from the old spi_flash driver to the new SPI
framework -- optional DMA RX support.  This typically cuts speeds by ~40%
at the cost of additional ~300 bytes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:36 -04:00
Mike Frysinger
2c0a6f2d4f Blackfin: add support for BF51x parts
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:36 -04:00
Mike Frysinger
180e311f28 Blackfin: add support for BF538/BF539 processors
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:36 -04:00
Wolfgang Denk
2e6e1772c0 Merge branch 'next' of /home/wd/git/u-boot/next
Conflicts:
	include/ppc4xx.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-28 23:30:47 +02:00
Mike Frysinger
55fed6fd0b Blackfin: bfin_spi: use same gpio cs define as Linux
Linux uses an offset of 8 to switch from hardware cs to a gpio cs,
so have u-boot use the same value.  Also make sure it is public
for boards to access.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-21 18:22:14 -04:00
Wolfgang Denk
ea882baf9c New implementation for internal handling of environment variables.
Motivation:

* Old environment code used a pessimizing implementation:
  - variable lookup used linear search => slow
  - changed/added variables were added at the end, i. e. most
    frequently used variables had the slowest access times => slow
  - each setenv() would calculate the CRC32 checksum over the whole
    environment block => slow
* "redundant" envrionment was locked down to two copies
* No easy way to implement features like "reset to factory defaults",
  or to select one out of several pre-defined (previously saved) sets
  of environment settings ("profiles")
* No easy way to import or export environment settings

======================================================================

API Changes:

- Variable names starting with '#' are no longer allowed

  I didn't find any such variable names being used; it is highly
  recommended to follow standard conventions and start variable names
  with an alphanumeric character

- "printenv" will now print a backslash at the end of all but the last
  lines of a multi-line variable value.

  Multi-line variables have never been formally defined, allthough
  there is no reason not to use them. Now we define rules how to deal
  with them, allowing for import and export.

- Function forceenv() and the related code in saveenv() was removed.
  At the moment this is causing build problems for the only user of
  this code (schmoogie - which has no entry in MAINTAINERS); may be
  fixed later by implementing the "env set -f" feature.

Inconsistencies:

- "printenv" will '\\'-escape the '\n' in multi-line variables, while
  "printenv var" will not do that.

======================================================================

Advantages:

- "printenv" output much better readable (sorted)
- faster!
- extendable (additional variable properties can be added)
- new, powerful features like "factory reset" or easy switching
  between several different environment settings ("profiles")

Disadvantages:

- Image size grows by typically 5...7 KiB (might shrink a bit again on
  systems with redundant environment with a following patch series)

======================================================================

Implemented:

- env command with subcommands:

  - env print [arg ...]

    same as "printenv": print environment

  - env set [-f] name [arg ...]

    same as "setenv": set (and delete) environment variables

    ["-f" - force setting even for read-only variables - not
    implemented yet.]

  - end delete [-f] name

    not implemented yet

    ["-f" - force delete even for read-only variables]

  - env save

    same as "saveenv": save environment

  - env export [-t | -b | -c] addr [size]

    export internal representation (hash table) in formats usable for
    persistent storage or processing:

	-t:	export as text format; if size is given, data will be
		padded with '\0' bytes; if not, one terminating '\0'
		will be added (which is included in the "filesize"
		setting so you can for exmple copy this to flash and
		keep the termination).
	-b:	export as binary format (name=value pairs separated by
		'\0', list end marked by double "\0\0")
	-c:	export as checksum protected environment format as
		used for example by "saveenv" command
	addr:	memory address where environment gets stored
	size:	size of output buffer

	With "-c" and size is NOT given, then the export command will
	format the data as currently used for the persistent storage,
	i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and
	prepend a valid CRC32 checksum and, in case of resundant
	environment, a "current" redundancy flag. If size is given, this
	value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32
	checksum and redundancy flag will be inserted.

	With "-b" and "-t", always only the real data (including a
	terminating '\0' byte) will be written; here the optional size
	argument will be used to make sure not to overflow the user
	provided buffer; the command will abort if the size is not
	sufficient. Any remainign space will be '\0' padded.

        On successful return, the variable "filesize" will be set.
        Note that filesize includes the trailing/terminating '\0'
        byte(s).

        Usage szenario: create a text snapshot/backup of the current
	settings:

		=> env export -t 100000
		=> era ${backup_addr} +${filesize}
		=> cp.b 100000 ${backup_addr} ${filesize}

	Re-import this snapshot, deleting all other settings:

		=> env import -d -t ${backup_addr}

  - env import [-d] [-t | -b | -c] addr [size]

    import external format (text or binary) into hash table,
    optionally deleting existing values:

	-d:	delete existing environment before importing;
		otherwise overwrite / append to existion definitions
	-t:	assume text format; either "size" must be given or the
		text data must be '\0' terminated
	-b:	assume binary format ('\0' separated, "\0\0" terminated)
	-c:	assume checksum protected environment format
	addr:	memory address to read from
	size:	length of input data; if missing, proper '\0'
		termination is mandatory

  - env default -f

    reset default environment: drop all environment settings and load
    default environment

  - env ask name [message] [size]

    same as "askenv": ask for environment variable

  - env edit name

    same as "editenv": edit environment variable

  - env run

    same as "run": run commands in an environment variable

======================================================================

TODO:

- drop default env as implemented now; provide a text file based
  initialization instead (eventually using several text files to
  incrementally build it from common blocks) and a tool to convert it
  into a binary blob / object file.

- It would be nice if we could add wildcard support for environment
  variables; this is needed for variable name auto-completion,
  but it would also be nice to be able to say "printenv ip*" or
  "printenv *addr*"

- Some boards don't link any more due to the grown code size:
  DU405, canyonlands, sequoia, socrates.

	=> cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>,
	       Stefan Roese <sr@denx.de>,
	       Heiko Schocher <hs@denx.de>

- Dropping forceenv() causes build problems on schmoogie

	=> cc: Sergey Kubushyn <ksi@koi8.net>

- Build tested on PPC and ARM only; runtime tested with NOR and NAND
  flash only => needs testing!!

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>,
Cc: Stefan Roese <sr@denx.de>,
Cc: Heiko Schocher <hs@denx.de>
Cc: Sergey Kubushyn <ksi@koi8.net>
2010-09-19 19:29:48 +02:00
Wolfgang Denk
91a76751a0 Make getenv() work before relocation.
So far, getenv() would work before relocation is most cases, even
though it was not intended to be used that way.  When switching to a
hash table based implementation, this would break a number of boards.

For convenience, we make getenv() check if it's running before
relocation and, if so, use getenv_f() internally.

Note that this is limited to simple cases, as we use a small static
buffer (32 bytes) in the global data for this purpose.

For this reason, it is also not a good idea to convert all current
uses of getenv_f() into getenv() - some of the existing use cases need
to be able to deal with longer variable values, so getenv_f() is still
needed and recommended for use before relocation.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-19 19:29:48 +02:00
Mike Frysinger
bbf4fbb6cc Blackfin: bf561: use DMA for Core B L1 regions
The L1 regions of Core B are not directly accessible from Core A, so we
need to use DMA to get at them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13 17:50:52 -04:00
Mike Frysinger
4638b21f2e Blackfin: import gpio/portmux layer from Linux
The current pinmux handling has spread throughout Blackfin drivers and
board code and is getting hideous to maintain.  So import the gpio and
portmux layer from the Blackfin Linux code.  This should spur a serious
of cleanups across the Blackfin tree.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-05 05:30:07 -04:00
Mike Frysinger
53ea1505bb Blackfin: update anomaly lists to latest sheets
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-05 04:18:18 -04:00
Peter Tyser
819833af39 Move architecture-specific includes to arch/$ARCH/include/asm
This helps to clean up the include/ directory so that it only contains
non-architecture-specific headers and also matches Linux's directory
layout which many U-Boot developers are already familiar with.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:12 +02:00