Commit graph

670 commits

Author SHA1 Message Date
Heinrich Schuchardt
3bad256f5b lib/vsprintf: allow printing upper case GUIDs
In the UEFI context GUIDs are expected to be rendered in upper case.

The patch uses the formerly unused bit 1 of the parameter str_format
of function uuid_bin_to_str() to indicate if we need upper or lower case
output.

Function uuid_string() in vsprint.c is adjusted to correctly set the bit
depending on the print format code.

%pUb: 01020304-0506-0708-090a-0b0c0d0e0f10
%pUB: 01020304-0506-0708-090A-0B0C0D0E0F10
%pUl: 04030201-0605-0807-090a-0b0c0d0e0f10
%pUL: 04030201-0605-0807-090A-0B0C0D0E0F10

Up to this point only a diagnostic message in mount_ubifs() using '%pUB' is
concerned by the change. Further patches are needed to adjust the UEFI
subsystem.

A unit test is provided inside the ut_print command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-07 10:52:30 -04:00
Marek Vasut
e63168a9ff video: Factor out vidconsole_put_string()
Pull the vidconsole_put_string() function from DM tests, make it
available to e.g. boards that want to display information on the
LCD on boot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-05-20 12:00:05 +02:00
Stephen Warren
89a5317ae2 test/py: don't use mmc_rd config for other mmc tests
Fix test_mmc_dev(), test_mmc_rescan(), test_mmc_info() not to use the
same configuration data that test_mmc_rd() does. Doing so causes the
following issues:

* The new code uncondtionally expects certain keys to exist in the
configuration data. These keys do not exist in existing configuration
data since they were not previously required, and there was no
notification re: a requirement to add these new keys. This causes test
failures due to thrown exceptions when accessing the non-existent keys.

* The new tests logically operate on different objects. test_mmc_rd()
operates on ranges of sectors on an MMC device (which may be the entire
set of sectors of a device, or a part of a device), whereas all the new
tests operate solely on entire devices. These are separate things, and
it's entirely likely that the user will wish to runs the two types of
tests on different sets of data; see the example configuration data that
this commit adds. Ideally, the new tests would have been added to a
separate Python file, since they aren' closely related to the existing
tests.

FIXME: Marek, can you please replace the "???" in this patch with some
reasonable looking data? Thanks.

Cc: Marek Vasut <marek.vasut@gmail.com>
Fixes: 4ffec8cdf5 ("test/py: mmc: Add 'mmc info' test")
Fixes: ce4b2cafa7 ("test/py: mmc: Add 'mmc rescan' test")
Fixes: 86dfd152c9 ("test/py: mmc: Add 'mmc dev' test")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-05-09 19:52:55 -04:00
Tom Rini
504bf790da Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- H6 Beelink GS1 board (Clément)
- Olimex A64-Teres-I board (Jonas)
- sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
- Change include order (Jagan)
- EPHY clock changes (Jagan)
- EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
2019-05-08 16:21:43 -04:00
Jagan Teki
41cdb28549 test/dm: reset: Add reset_get_by_index[_nodev] test
Add sample dm reset test for reset_get_by_index and
reset_get_by_index_nodev functionality code.

Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-09 00:44:13 +05:30
Jagan Teki
d7a672e35f test/dm: clk: Add clk_get_by_index[_nodev] test
Add sample dm clk test for clk_get_by_index and
clk_get_by_index_nodev functionality code.

Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-09 00:44:13 +05:30
Heinrich Schuchardt
6c74e94a65 lib/display_options: avoid illegal memory access
display_options_get_banner_priv() overwrites bytes before the start of the
buffer if the buffer size is less then 3. This case occurs in the Sandbox
when executing the `ut_print` command.

Correctly handle small buffer sizes. Adjust the print unit test to catch
when bytes before the buffer are overwritten.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-05 08:48:50 -04:00
Dinh Nguyen
84b124db35 dm: cache: Create a uclass for cache
The cache UCLASS will be used for configure settings that can be found
in a CPU's L2 cache controller.

Add a uclass and a test for cache.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-05-05 08:48:50 -04:00
Igor Opaniuk
fc1fe01b08 avb: add support for named persistent values
AVB 2.0 spec. revision 1.1 introduces support for named persistent values
that must be tamper evident and allows AVB to store arbitrary key-value
pairs [1].

Introduce implementation of two additional AVB operations
read_persistent_value()/write_persistent_value() for retrieving/storing
named persistent values.

Correspondent pull request in the OP-TEE OS project repo [2].

[1]: https://android.googlesource.com/platform/external/avb/+/android-9.0.0_r22
[2]: https://github.com/OP-TEE/optee_os/pull/2699

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-04-26 18:58:22 -04:00
Tom Rini
180e38ad2d Pull request for UEFI sub-system for v2019.07-rc1 (3)
This patch series reworks the implementation of the `bootefi` command to
 remove code duplication by using the LoadImage() boot service to load
 binaries.
 
 Missing short texts for UEFI protocols are added for display by the
 `efidebug dh` command.
 
 Missing parameter checks for AllocatePages() and CreateDeviceNode() are
 implemented.
 
 The constants for protocol GUIDs are changed to match the names in the UEFI
 specification.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAly/PhwACgkQxIHbvCwF
 GsRlbA/+JeegsUbV0fYFvdTi4JNPRlKqkzwyo2DoWN76M2MPb+l6d4quxhOdAOaf
 3MpnCHb2z0567b7Ma5+KmAFYEBNJZrxAHthmtRnYhAbJMpE1ei6HzwJ29p+IYQKB
 usc6eOH7ybb99v0KtxLRr1CMpvxK6zud5Zxcyym5nzoAaNP4AplaQDUM1mfYOHox
 sRbEuoNpPkn50ejUtldb0Oh63vJ/bBBLojwQyGnGtBcRDf5bFehHzw5spD0oHPJv
 7E1kze2679kOEsjPa39rFhh/8YaUd+giJW137V2cyFeEyw6ydNKXuWo9Zg0ahLOy
 e+ddRjDCbi0edHbOjL6hdNTgGzdcKwy9bHqYJEacP+OLczmzimNQaALCDUzXcH1C
 lGLHrhbMpV+Do4mFIFdIqPyW+rfRDsz9Sp84Y02M6TBzCK3XPmPXDRVpiTcWmfbb
 ixD4HSQjvPDcmm98iJQIZrfcasnWbBInITqcGDDTIRg0snrYUsIoUNmQPpBDsuwD
 O1hPV8iOpFA/a/8GLJpIgta34YIPZzjlaU38c5+qV7Tsx0ODsdpTVx8JCWeJPeK+
 uhOXTWMlokgH//2ypHzIS9cUEBkoA6I9r4/fWpIjZe3iuxtV8ct2P5dHYcmrRFjY
 lF1WpX3gNeWCgPbGa3Yg/crtpVW+M6hDEgknOPqTAOTjx/g7jpg=
 =caQ+
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc1-3' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc1 (3)

This patch series reworks the implementation of the `bootefi` command to
remove code duplication by using the LoadImage() boot service to load
binaries.

Missing short texts for UEFI protocols are added for display by the
`efidebug dh` command.

Missing parameter checks for AllocatePages() and CreateDeviceNode() are
implemented.

The constants for protocol GUIDs are changed to match the names in the UEFI
specification.
2019-04-24 12:26:58 -04:00
Heinrich Schuchardt
0efe2b8f9e test: env: Enable env unit tests by default
If CONFIG_UNIT_TEST is enabled we should enable the individual tests by
default to ensure good test coverage.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-24 07:27:28 -04:00
Heinrich Schuchardt
68066d5bcd efi_selftest: do not run FDT test with ACPI table.
The EBBR specification prescribes that we should have either an ACPI table
or a device tree but not both.

So do not run the device tree unit test on boards with an ACPI table.
Hence there is no need any longer to make it 'on request' only.
Do not pass $fdtcontroladdr to `bootefi selftest`.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
Heinrich Schuchardt
10feb30c70 test/py: pytest.mark.notbuildconfigspec()
We already can let a Python test depend on a build option being set via
@pytest.mark.buildconfigspec(). It may be necessary to let a test depend on
a build option *not* being set. So let's introduce

    @pytest.mark.notbuildconfigspec

for this purpose.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
Heinrich Schuchardt
8334431651 test: call hexdump tests via ut lib
The unit tests in test/lib/hexdump.c are not related to the device tree.
So they should be executed via `ut lib` and not via `ut dm`.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-22 18:13:21 -04:00
Michal Simek
963482120d test: py: Extend fpga test with fit image with external data
Images are created
mkimage -f fit.its -E  download-fit-external.ub

and test expects these entries.

env__fpga_under_test = {
    ...
    "mkimage_fit_external": download-fit-external.ub",
    "mkimage_fit_external_size": xxxxx,
    ...
}

Test download file and loads it to fpga.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-16 11:51:34 +02:00
Patrick Delaunay
a442e61e24 syscon: update syscon_regmap_lookup_by_phandle
Change the function syscon_regmap_lookup_by_phandle()
introduced by commit 6c3af1f24e ("syscon: dm: Add a
new method to get a regmap from DTS") to have
Linux-compatible syscon API.

Same modification than commit e151a1c288 ("syscon: add
Linux-compatible syscon API") solves issue when the node
identified by the phandle has several compatibles and is
already bound to a dedicated driver.

See Linux commit bdb0066df96e ("mfd: syscon: Decouple syscon
interface from platform devices").

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-11 20:10:05 -06:00
Tom Rini
0a8406602a test.py: Disable fsck for FAT tests for now
Currently enabling fsck on FAT16/FAT32 exposes that we have problems
with:
TestFsBasic.test_fs13[fat16]
TestFsBasic.test_fs11[fat32]
TestFsBasic.test_fs12[fat32]
TestFsBasic.test_fs13[fat32]
TestFsExt.test_fs_ext1[fat32]
TestFsExt.test_fs_ext2[fat32]
TestFsExt.test_fs_ext3[fat32]
TestFsExt.test_fs_ext4[fat32]
TestFsExt.test_fs_ext5[fat32]
TestFsExt.test_fs_ext6[fat32]
TestFsExt.test_fs_ext7[fat32]
TestFsExt.test_fs_ext8[fat32]
TestFsExt.test_fs_ext9[fat32]
TestMkdir.test_mkdir6[fat16]
TestMkdir.test_mkdir1[fat32]
TestMkdir.test_mkdir2[fat32]
TestMkdir.test_mkdir3[fat32]
TestMkdir.test_mkdir4[fat32]
TestMkdir.test_mkdir5[fat32]
TestMkdir.test_mkdir6[fat32]
TestUnlink.test_unlink1[fat16]
TestUnlink.test_unlink2[fat16]
TestUnlink.test_unlink3[fat16]
TestUnlink.test_unlink4[fat16]
TestUnlink.test_unlink5[fat16]
TestUnlink.test_unlink6[fat16]
TestUnlink.test_unlink7[fat16]
TestUnlink.test_unlink1[fat32]
TestUnlink.test_unlink2[fat32]
TestUnlink.test_unlink3[fat32]
TestUnlink.test_unlink4[fat32]
TestUnlink.test_unlink5[fat32]
TestUnlink.test_unlink6[fat32]
TestUnlink.test_unlink7[fat32]

This is because we don't update the "information sector" on FAT32.
While in the future we should resolve this problem and include that
feature, we should enable fsck for ext4 to ensure that things remain in
good shape there.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-10 08:15:56 -04:00
Marek Vasut
e551979790 test/py: mmc: Add 'mmc read' performance check
Add option to the mmc rd test to check the duration of the
execution of the mmc read command. This allows intercepting
read performance regressions.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:05 -04:00
Marek Vasut
4ffec8cdf5 test/py: mmc: Add 'mmc info' test
Add test for 'mmc info' subcommand. This tests whether the card
information is obtained correctly and verifies the device, bus
speed, bus mode and bus width.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:05 -04:00
Marek Vasut
ce4b2cafa7 test/py: mmc: Add 'mmc rescan' test
Add test for 'mmc rescan' subcommand. This tests whether the
system can switch to a specific card and then rescan the card.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:05 -04:00
Marek Vasut
86dfd152c9 test/py: mmc: Add 'mmc dev' test
Add separate test for 'mmc dev' subcommand. This tests whether
the system can switch to a specific card.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:04 -04:00
Marek Vasut
d22f7ad86a test/py: mmc: Factor out device selection
Factor out the 'mmc dev' call so it can be recycled by other tests.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:04 -04:00
Jean-Jacques Hiblot
ef79284e7a test: fs: Added tests for symlinks
Test cases are:
1) basic link creation, verify it can be followed
2) chained links, verify it can be followed
3) replace exiting file a with a link, and a link with a link. verify it
   can be followed
4) create a broken link, verify it can't be followed

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
290100583d test: fs: Add filesystem integrity checks
We need to make sure that file writes,file creation, etc. are properly
performed and do not corrupt the filesystem.
To help with this, introduce the assert_fs_integrity() function that
executes the appropriate fsck tool. It should be called at the end of any
test that modify the content/organization of the filesystem.
Currently only supports FATs and EXT4.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 15:34:15 -04:00
Jean-Jacques Hiblot
5cfc73e6e2 test: fs: disable the metadata checksums on ext4 filesystems
If the metadata checksums are enabled, all write operations will fail.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 15:34:15 -04:00
Heinrich Schuchardt
bfc2dd5381 efi_loader: correct CTRL-A - CTRL-Z console input
In the extended text input protocol CTRL-A - CTRL-Z have to be signaled as
Unicode characters a-z or A-Z depending on the shift state and not as 0x01
to 0x1a.

Update Python unit test.

This patch is required for using the EFI shell `edit` command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07 15:11:33 +02:00
Martyn Welch
280fafff16 test: Update test-imagetools.sh to match new syntax
The syntax of dumpimage was simplified in commit 12b831879a ("tools:
dumpimage: Simplify arguments"), but the test
(test/image/test-imagetools.sh) was not updated and is now failing.

Update the test to use the new syntax.

Reported-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
2019-03-08 11:31:44 -05:00
Anup Patel
b630d57d0a clk: Add fixed-factor clock driver
This patch adds fixed-factor clock driver which derives clock
rate by dividing (div) and multiplying (mult) fixed factors
to a parent clock.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-27 09:12:33 +08:00
Simon Glass
2850266965 sound: Add uclass operations for beeping
Some audio codecs such as Intel HDA do not need to use digital data to
play sounds, but instead have a way to emit beeps. Add this interface as
an option. If the beep interface is not supported, then the sound uclass
falls back to the I2S interface.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:08 +08:00
Simon Glass
1260f8c0ef pch: Add ioctl support
At present the PCH has 4 operations and these are reasonably widely used
in the drivers. But sometimes we want to add rarely used operations, and
each of these currently adds to the size of the PCH operations table.

Add an ioctl() method which can be easily expanded without any more impact
on the operations table.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:08 +08:00
Simon Glass
b45c833c71 sandbox: pch: Add a test for the PCH uclass
This uclass currently has no tests. Add a sandbox driver and some simple
tests to provide basic coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: Use "sandbox,pch" for the compatible string, for consistency]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:26:36 +08:00
Igor Opaniuk
7374b15522 test: let use gdbserver for all sandbox targets
Enable usage of gdbserver for all sandbox targets (sandbox,
sandbox_flattree etc.).

Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-19 08:55:43 -05:00
Heinrich Schuchardt
bc19681acf test: adjust names of Unicode test functions
In test/py/conftest.py the assumption is made that for if a test is called
with `ut unicode` the test function name starts with 'unicode_test_'. As
the Unicode tests did not follow this naming scheme they were not executed
by `make tests`.

Rename the Unicode test functions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-16 15:42:20 +01:00
Heinrich Schuchardt
abb93cb0e5 test: tests for u16_strdup() and u16_strcpy()
Provide unit tests for u16_strdup() and u16_strcpy().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13 09:40:05 +01:00
Heinrich Schuchardt
b1b1bab7f9 test/py: use default load address for tftp
On x86_64 the size of the file u-boot loaded by the tftp test has grown in
size such that when loading the file to 0x200000 it overwrites a memory
area reserved for PCI.

If no load address is specified for tftp do not use the ram base address
(or if zero 0x200000) but the default address.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-12 07:19:24 -05:00
Tom Rini
f94fa0e94f Merge branch 'master' of git://git.denx.de/u-boot-i2c
- DM I2C improvements
2019-02-11 11:15:34 -05:00
Tom Rini
151b8339cc Samsung sound patches (applied for Samsung maintainer)
Common sound support
 buildman environment support
 of-platdata documentation improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlxf7igRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYKfggApQiL0Gv6NdGAQN+zfpjKY5a2QyjKsAxa
 KLm3q8XyXIQXufMWOEPoW1iWm0iixpIFgChy8ff3m/OPDzsx99UXDTyvjitsSxtQ
 5tFu8K78nUZT6OOE3HNhhlyW/xK442oKBzGt4MUt3kUZOELsCNuftgbJUWksHuO3
 6pPrgt36E0uRGbUA4ioYCU336viJRPOOCdqb8hHViEihFj/IEv5T82RdE5y97YxG
 dT7BZxjPkBH5ZN1uD/tdxG1k6IZBagZiYoDAsYp4YqNwmVsm5sLrZ9QVSf7EcH/y
 qX8butZesiMd7xm7RROlrIImh7fb36N3zsoRiUWZDo1Al3IRkmZyVA==
 =tdut
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-10feb19' of git://git.denx.de/u-boot-dm

Samsung sound patches (applied for Samsung maintainer)
Common sound support
buildman environment support
of-platdata documentation improvements
2019-02-10 08:11:32 -05:00
Lokesh Vutla
cc4a224af2 power: regulator: Introduce regulator_set_enable_if_allowed api
regulator_set_enable() api throws an error in the following three cases:
- when requested to disable an always-on regulator
- when set_enable() ops not provided by regulator driver
- when enabling is actually failed.(Error returned by the regulator driver)

Sometimes consumer drivers doesn't want to track the first two scenarios
and just need to worry about the case where enabling is actually failed.
But it is also a good practice to have an error value returned in the
first two cases.

So introduce an api regulator_set_enable_if_allowed() which ignores the
first two error cases and returns an error as given by regulator driver.
Consumer drivers can use this api need not worry about the first two
error conditions.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-09 12:50:22 -07:00
Marcel Ziswiler
f388564965 dm: device: fail uclass_find_first_device() if list_empty
While uclass_find_device() fails with -ENODEV in case of list_empty
strangely uclass_find_first_device() returns 0.

Fix uclass_find_first_device() to also fail with -ENODEV instead.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-09 07:51:00 -05:00
Roman Kapl
9dfdbd9f0c hashtable: fix environment variable corruption
Only first previously deleted entry was recognized, leading hsearch_r
to think that there was no previously deleted entry. It then conluded
that a free entry was found, even if there were no free entries and it
overwrote a random entry.

This patch makes sure all deleted or free entries are always found and
also introduces constants for the 0 and -1 numbers. Unit tests to excersise a
simple hash table usage and catch the corruption were added.

To trash your environment, simply run this loop:

setenv i 0
while true; do
    setenv v_$i $i
    setenv v_$i
    setexpr i $i + 1
done

Signed-off-by: Roman Kapl <rka@sysgo.com>
2019-02-09 07:50:54 -05:00
Heinrich Schuchardt
2dd0111adc test: provide unit test for memory functions
Memory functions may have architecture specific implementations. These
should be tested.

Provide unit tests for memset(), memcpy(), memmove().

Provide a 'ut lib' sub-command to execute the tests.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-09 07:50:53 -05:00
Michal Simek
a93eb577b9 dm: core: Add tests for dev_read_alias_highest_id()
It is checking the highest alias ID for eth, gpio, pci, i2c and error
code on non existing alias.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-08 06:25:49 +01:00
Simon Goldschmidt
dc57be51e9 test: lib: lmb: add lmb test for multiple RAM banks
This adds one test case that checks that allocation with multiple
DRAM banks works correctly.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-02 08:23:33 -05:00
Simon Goldschmidt
65304aade8 lib: lmb: rename lmb_get_unreserved_size to lmb_get_free_size
As a follow-up, change the name of the newly introduced function
'lmb_get_unreserved_size' to 'lmb_get_free_size', which is more
appropriate.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fix test/lib/lmb.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-26 08:13:57 -05:00
Thomas RIENOESSL
a735e6e9d6 net: explicitly assign errno to return code in case of network failure
When dealing with two ethernet ports and having "netretry" set
to "once", it could occur that the connection (e.g. an ARP
request) failed, hence the status of the netloop was
"NETLOOP_FAIL". Due to the setting of "netretry", the network
logic would then switch to the other network interface,
assigning "ret" with the return value of "net_start_again()".
If this call succeeded we would return 0 (i.e. success) to
the caller when in reality the network action failed.

Signed-off-by: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-01-24 11:35:28 -06:00
Simon Goldschmidt
4cc8af8037 lib: lmb: extend lmb for checks at load time
This adds two new functions, lmb_alloc_addr and
lmb_get_unreserved_size.

lmb_alloc_addr behaves like lmb_alloc, but it tries to allocate a
pre-specified address range. Unlike lmb_reserve, this address range
must be inside one of the memory ranges that has been set up with
lmb_add.

lmb_get_unreserved_size returns the number of bytes that can be
used up to the next reserved region or the end of valid ram. This
can be 0 if the address passed is reserved.

Added test for these new functions.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-16 16:37:04 -05:00
Simon Goldschmidt
0f7c51a676 lib: lmb: reserving overlapping regions should fail
lmb_add_region handles overlapping regions wrong: instead of merging
or rejecting to add a new reserved region that overlaps an existing
one, it just adds the new region.

Since internally the same function is used for lmb_alloc, change
lmb_add_region to reject overlapping regions.

Also, to keep reserved memory correct after 'free', reserved entries
created by allocating memory must not set their size to a multiple
of alignment but to the original size. This ensures the reserved
region is completely removed when the caller calls 'lmb_free', as
this one takes the same size as passed to 'lmb_alloc' etc.

Add test to assert this.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-16 16:37:00 -05:00
Simon Goldschmidt
d67f33cf4e lmb: fix allocation at end of address range
The lmb code fails if base + size of RAM overflows to zero.

Fix this by calculating end as 'base + size - 1' instead of 'base + size'
where appropriate.

Added tests to assert this is fixed.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-16 16:36:48 -05:00
Simon Goldschmidt
a01ae0c23f test: add test for lib/lmb.c
Add basic tests for the lmb memory allocation code used to reserve and
allocate memory during boot.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-16 16:14:46 -05:00
Tom Rini
aac0c29d4b Fix recent changes to serial API for driver model
Buildman clang support and a few fixes
 Small fixes to 'dm tree' and regmap test
 Improve sandbox build compatibility
 A few other minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlw+AlIACgkQfxc6PpAI
 reYchAf+L/P5JsLoCKAY84v11eWQkCS44idAYStD8Q023dyuyNC/W6G3qEQVGkHu
 SXBzNrZ5wSJanN5I3h3ktJ7yfMOYIvSO2qLHphxDstPaZbCY4Zac6NywHrHxQpA9
 fbSilQRbcVWrPo5rsjjZhXmMdQRZVOmGD6CYZj1AihWAiHfYth7f6laNWNTWQA8C
 z+aoiF70t/PbvwFbgdzzYOjoGdXI9XML0xTqdLWRlsBKjf3z54pCV6LmN2xrsrDZ
 k7lr+x7ajJUFhivxzjowf4aOjhDB+/+I3sr+hJ5vkMM0Kqg14bbEU+xJRGpDc18K
 QPvVHT5JGe/nq1cZXuCqzrYxTrrA7A==
 =w9ln
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-15jan19' of git://git.denx.de/u-boot-dm

Fix recent changes to serial API for driver model
Buildman clang support and a few fixes
Small fixes to 'dm tree' and regmap test
Improve sandbox build compatibility
A few other minor fixes
2019-01-15 22:05:34 -05:00