Commit graph

38 commits

Author SHA1 Message Date
Simon Glass
1c5a81d803 sandbox: Remove the old memory file later
When debugging sandbox it is sometimes annoying that the memory file is
deleted early on. If sandbox later crashes or we quit (using the
debugger), it is not possible to run it again with the same state since
the memory file is gone.

Remove the old memory file when sandbox exits, instead. Also add debugging
showing the memory filename.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:26 -06:00
Simon Glass
2b1dc29a12 sandbox: Add a flag to set the default log level
It is useful to be able to set the default log level from the command line
when running sandbox. Add a new -L command-line flag for this. The log
level is set using the enum log_level_t in log.h. At present a number must
be specified, e.g. -L7 for debug.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:26 -06:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Andy Yan
1fc50d727f sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation
SPL and normal u-boot stage use different malloc pool size
configuration before relocation, so use CONFIG_VAL(SYS_MALLOC_F_LEN)
to fit different boot stage.

Signed-off-by: Andy Yan <andyshrk@gmail.com>

Changes in v3:
- use CONFIG_VAL(), which suggested by Simon

Changes in v2: None

 arch/sandbox/cpu/start.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Simon Glass
689697785e board_f: sandbox: Move sandbox_early_getopt_check() into misc_init_f()
We don't need a special hook for sandbox as one of the later ones will do
just as well. We can print error messages about bad options after we
print the banner. In fact, it seems better.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:55:07 -04:00
Simon Glass
bb967240bb board_f: sandbox: Move setup_ram_buf() to private code
There is no need to have this call in the generic init sequence and no
other architecture has needed it in the time it has been there. Move it
into sandbox's private code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:35 -04:00
Simon Glass
d0d0746e0c sandbox: Don't include the main loop in SPL
SPL does not have a command interface so we should not include the main loop
code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
2b6793de25 sandbox: Avoid calling commands when not available
Don't try to run commands when not supported.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:10 -04:00
Simon Glass
9ce8b40206 test: Record and silence console in tests
When running sandbox tests, silence the console to avoid unwanted output.
Also, record the console in case tests want to check it.

The -v option can be used to enable stdout during tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:51 -07:00
Simon Glass
3806882042 sandbox: Add missing errno.h includes in a few files
These files use error numbering, so add the include.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:34 -06:00
Sjoerd Simons
ebaa832e99 sandbox: Don't try distro_bootcmd by default
For the distro_bootcmds to succeed on the sandbox a bit of setup is
required (e.g. network configured or host image bound), so running them
by default isn't that useful.

Add a -b/--boot command to the sandbox binary, which triggers the
distro_bootcmds to run after the other command-line commands.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-06 12:48:36 -06:00
Joe Hershberger
88539e4431 sandbox: Return '-c command' exit value as sandbox exit code
When a command is passed into sandbox using the '-c' argument the
command is run directly. This is most helpful when running tests (such
as test-dm.sh). Previously the exit code was an unused enum. Change it
to be the actual return code from the command so that the script calling
sandbox can know if the command succeeded (tests passed).  Also remove
the now completely unused "exit_state" in sandbox.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-15 14:34:06 -07:00
Simon Glass
1f32ae9578 sandbox: Add a -D option to use a default device tree
It is painful to specify the full path to the device tree with the -d
option. It is normally kept in the same directory as U-Boot, so provide
an option to use this by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-30 15:52:14 -07:00
Simon Glass
f80a8bbee8 sandbox: Fix warnings in cpu.c and os.c
This fixes the following two problems:

cppcheck reports:
[arch/sandbox/cpu/start.c:132]: (error) Uninitialized variable: err
[arch/sandbox/cpu/os.c:371]: (error) Memory leak: fname

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Wolfgang Denk <wd@denx.de>
2014-11-26 20:25:39 -07:00
Masahiro Yamada
b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00
Rabin Vincent
7dbcb76e77 sandbox: init cli for -c
sandbox crashes if a variable is set in the -c command, because
hush's top_vars is not allocated.  Call cli_init() from sandbox
to ensure this is done before we execute the -c command.

 $ ./u-boot -c 'a=1'
 ...
 Segmentation fault (core dumped)

Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Simon Glass <sjg@chromium.org)
Tested-by: Simon Glass <sjg@chromium.org)
2014-11-07 16:27:05 -05:00
Simon Glass
29afe9e6ed sandbox: Support pre-relocation malloc()
Set up and zero global data before board_init_f() is called so that we can
remove the need for CONFIG_SYS_GENERIC_GLOBAL_DATA.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:06:13 +01:00
Simon Glass
4d94dfa059 sandbox: Set up global data before board_init_f()
At present sandbox defines CONFIG_SYS_GENERIC_GLOBAL_DATA, meaning that
the global_data pointer is set up in board_init_f().

If we set up and zero the global data before calling board_init_f() then we
don't need to define CONFIG_SYS_GENERIC_GLOBAL_DATA.

Make this change to simplify the init process.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:05:39 +01:00
Simon Glass
ab839dc3e6 sandbox: Add options to clean up temporary files
When jumping from one sandbox U-Boot to another in sandbox, the RAM buffer
is preserved in the jump by using a temporary file. Add an option to tell
the receiving U-Boot to remove this file when it is no longer needed.

Similarly the old U-Boot image is left behind in this case. We cannot delete
it immediately since gdb cannot then find its debug symbols. Delete it just
before exiting.

Together these changes ensure that temporary files are removed both for
memory and U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17 20:05:49 -06:00
Simon Glass
ffb87905cb sandbox: Allow Ctrl-C to work in sandbox
It is useful for Cltl-C to be handled by U-Boot as it is on other boards.
But it is also useful to be able to terminate U-Boot with Ctrl-C.

Add an option to enable signals while in raw mode, and make this the
default. Add an option to leave the terminal cooked, which is useful for
redirecting output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17 20:05:49 -06:00
Simon Glass
7d95f2a329 sandbox: Add LCD driver
Add a simple LCD driver which uses SDL to display the image. We update the
image regularly, while still providing for reasonable performance.

Adjust the common lcd code to support sandbox.

For command-line runs we do not want the LCD to be displayed, so add a
--show_lcd option to enable it.

Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17 20:05:49 -06:00
Simon Glass
bda7773f04 sandbox: Add -j option to indicate a jump from a previous U-Boot
In order to support the 'go' command we allow the jumping U-Boot to pass its
filename to the new U-Boot image. This can then be used to delete that image
if required.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17 20:05:48 -06:00
Simon Glass
1209e2727c sandbox: Add facility to save/restore sandbox state
It is often useful to be able to save out the state from a sandbox test
run, for analysis or to restore it later to continue a test. Add generic
infrastructure for doing this using a device tree binary file. This is
a flexible tagged file format which is already supported by U-Boot, and
it supports hierarchy if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
2014-01-08 17:25:08 -07:00
Simon Glass
5c2859cdc3 sandbox: Allow reading/writing of RAM buffer
It is useful to be able to save and restore the RAM contents of sandbox
U-Boot either for setting up tests, for later analysys, or for chaining
together multiple tests which need to keep the same memory contents.

Add a function to provide a memory file for U-Boot. This is read on
start-up and written when shutting down. If the file does not exist
on start-up, it will be created when shutting down.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-01-08 17:25:03 -07:00
Simon Glass
c5a62d4a7b sandbox: Add -i option to enter interactive mode
Normally when U-Boot starts with a command (-c option) it quits when the
command completes. Normally this is what is requires, since the test is
likely complete.

Provide an option to jump into the console instead, so that debugging or
other tasks may be performed before quitting.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-01-08 17:24:53 -07:00
Simon Glass
808434cdbd sandbox: Allow return from board_init_f()
The execution flow becomes easier if we can return from board_init_f()
as ARM does. We can control things from start.c instead of having to
call back into that file from other places.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-01-08 17:24:38 -07:00
Simon Glass
6ebcab8de7 sandbox: Correct help message <arg> garbling
The <arg> is displayed for options with no argument, and omitted for those
with an argument. Swap this around.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-01-08 17:24:23 -07:00
Simon Glass
7b3efc6699 sandbox: Rename sb_cmdline_option to sandbox_cmdline_option
The new name is longer but more clearly related to sandbox.

This is in a separate patch within the same series since some comments on the
SPI series rely on it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
2013-12-09 12:22:02 -07:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Simon Glass
39042d821e sandbox: Allow -c argument to provide a command list
This allows passing of entire scripts to sandbox with the -c argument,
which is useful for testing. Commands can be delimited with a newline
or semicolon.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01 11:17:21 -04:00
Simon Glass
f828bf25fe sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host file
With sandbox it is tricky to add an FDT to the image at build time (or
later) since we build an ELF file, not a plain binary, and the address
space of the whole U-Boot is not accessible in the emulated memory map
of sandbox.

Sandbox can read files directly from the host, though, so add an option
to read an FDT from a host file on start-up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01 11:17:21 -04:00
Allen Martin
8ec21bbe5c sandbox: fix compiler warning
Add back return statement to fix compiler warning about control flow
reaching end of non void function that was introduced with:

	e05e5de arm: move C runtime setup code in crt0.S

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2013-02-28 19:09:21 -08:00
Simon Glass
61ddce07f8 sandbox: Use the new run_command()
Now that run_command() handles both parsers, clean up sandbox to use it.
This fixes a build error.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-04-23 22:53:54 +02:00
Simon Glass
70db4212fc sandbox: add getopt support
This adds simple command-line parsing to sandbox. The idea is that it
sets up the state with options provided, and this state can then be
queried later, as needed.

New flags are declared with the SB_CMDLINE_OPT_SHORT helper macro,
pointers are automatically gathered up in a special section, and
then the core code takes care of gathering them up and processing
at runtime.  This way there is no central place where we have to
store a list of flags with ifdefs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-12 11:06:01 -04:00
Simon Glass
ab4e07eb71 sandbox: allow processing before main loop
In order to pass command line arguments to sandbox we need to be able
to act on them. So take control back at the end of board_init_r() from
where we can call the main loop or do something else.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-12 11:06:00 -04:00
Simon Glass
6fb6207821 sandbox: add concept of sandbox state
The state exists through the life of U-Boot. It can be adjusted by command
line options and perhaps later through a config file.  It is available to
U-Boot through state_...() calls (within sandbox code).

The primary purpose of this is to contain the "hardware" state.  It should
only be used by sandbox internal code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-12 11:06:00 -04:00
Mike Frysinger
fec79acc86 sandbox: drop unused return
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Simon Glass <sjg@chromium.org>
2011-11-03 22:35:25 +01:00
Simon Glass
bace3d00f2 sandbox: Add main program
Add a main program so that we can run U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-17 23:56:58 +02:00