Commit graph

180 commits

Author SHA1 Message Date
Heinrich Schuchardt
c7c0ca3767 efi_loader: fix efi_dp_from_file()
* When called from efi_dp_from_name() we miss to append the filename
  for non-block devices.
* expand_media_path() could be simplified by using efi_dp_from_file to
  prepend the device path of the boot device.

This can be avoided by passing a device path to efi_dp_from_file() instead
of a block device descriptor and a partition number.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-13 11:09:51 +02:00
Heinrich Schuchardt
93e3364804 cmd: bootefi: allocate device-tree copy from high memory
The bootefi command creates a copy of the device-tree within the first
127 MiB of memory. This may lead to overwriting previously loaded binaries
(e.g. kernel, initrd).

Linux EFI stub itself copies U-Boot's copy of the device-tree. This means
there is not restriction for U-Boot to place the device-tree copy to any
address. (Restrictions existed for 32bit ARM before Linux commit
7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region")
for legacy booting.

Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2023-03-25 12:04:49 +01:00
Etienne Carriere
aa2d3945ce efi_loader: Measure the loaded DTB
Measures the DTB passed to the EFI application upon new boolean config
switch CONFIG_EFI_TCG2_PROTOCOL_MEASURE_DTB. For platforms where the
content of the DTB passed to the OS can change across reboots, there is
not point measuring it hence the config switch to allow platform to not
embed this feature.

Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-02-19 21:15:15 +01:00
Ilias Apalodimas
70089c13a7 efi_loader: remove efi_delete_handle on loadfile2
Loadfile2 code is installing two protocols on it's own handle
and uses efi_delete_handle() to clean it up on failure(s). However
commit 05c4c9e21a ("efi_loader: define internal implementations of
install/uninstallmultiple") prepares the ground for us to clean up
efi_delete_handle() used in favor of Install/UninstallMultipleProtocol.

While at it clean up the non needed void casts to (void *) on the
protolcol installation.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-10-16 12:23:22 +02:00
Ilias Apalodimas
a75e8355ea cmd: replace efi_create_handle/add_protocol with InstallMultipleProtocol
In general handles should only be deleted if the last remaining protocol
is removed.  Instead of explicitly calling
efi_create_handle -> efi_add_protocol -> efi_delete_handle which blindly
removes all protocols from a handle before removing it,  use
InstallMultiple/UninstallMultiple which adheres to the EFI spec and only
deletes a handle if there are no additional protocols present

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-10-06 22:54:58 +02:00
Simon Glass
d9d7c20b73 treewide: Drop bootm_headers_t typedef
This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-29 16:07:57 -04:00
Heinrich Schuchardt
868353daa3 efi_loader: memory leak in efi_set_bootdev()
efi_dp_str() allocates memory which should be released after use.

Use %pD printf code. Adjust message wording.

Fixes: d837cb1e3b ("efi: Add debugging to efi_set_bootdev()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-07-13 20:07:07 +02:00
Rui Miguel Silva
bfef72e4dd cmd: load: add load command for memory mapped
cp.b is used a lot as a way to load binaries to memory and execute
them, however we may need to integrate this with the efi subsystem to
set it up as a bootdev.

So, introduce a loadm command that will be consistent with the other
loadX commands and will call the efi API's.

ex: loadm $kernel_addr $kernel_addr_r $kernel_size

with this a kernel with CONFIG_EFI_STUB enabled will be loaded and
then subsequently booted with bootefi command.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-22 11:35:47 -04:00
Heinrich Schuchardt
8131c85a77 cmd/bootefi: correct command syntax
For indicating the address and size of a memory region other commands use a
<addr>[:<size>] syntax. Do the same for bootefi.

Fixes: 2058983689 ("cmd: bootefi: restore ability to boot arbitrary blob")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-28 10:59:27 +02:00
Kyle Evans
2058983689 cmd: bootefi: restore ability to boot arbitrary blob
Up until commit 5f59518a7b ("efi_loader: setting boot device"), we
could boot an arbitrary blob with bootefi. Indeed, efi_run_image() even
has a special case for missing device paths indicating a payload that
was directly loaded via JTAG, for example.

Restore the ability to inject a UEFI payload into memory and `bootefi`
it. If the address passed isn't the last PE-COFF loaded, then we'll
wipe out the pre-existing DP/Image information and let efi_run_image()
synthesize a memory device path.

An image size is required if we're booting an arbitrary payload, and
the FDT argument has been changed to accept `-`. The size could be
deduced from the image header, but it's required anyways as an explicit
acknowledgment that one's trying to boot an arbitrary payload rather
than accidentally using the wrong address in the single-addr form.

Fixes: 5f59518a7b ("efi_loader: setting boot device")
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-04-23 22:05:33 +02:00
Alexander Graf
0832dd2900 efi_loader: Ignore DT when ACPI is on
For targets that enable ACPI, we should not pass Device Trees into
the payload. However, our distro boot logic always passes the builtin
DT as an argument.

To make it easy to use ACPI with distro boot, let's just ignore the DT
argument to bootefi when ACPI is enabled. That way, we can successfully
distro boot payloads on ACPI enabled targets.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Masahisa Kojima
3fa9ed9ae3 efi_loader: update the timing of enabling and disabling EFI watchdog
UEFI specification requires that 5 minutes watchdog timer is
armed before the firmware's boot manager invokes an EFI boot option.
This watchdog timer is updated as follows, according to the
UEFI specification.

 1) The EFI Image may reset or disable the watchdog timer as needed.
 2) If control is returned to the firmware's boot manager,
    the watchdog timer must be disabled.
 3) On successful completion of EFI_BOOT_SERVICES.ExitBootServices()
    the watchdog timer is disabled.

1) is up to the EFI image, and 3) is already implemented in U-Boot.
This patch implements 2), the watchdog is disabled when control is
returned to U-Boot.

In addition, current implementation arms the EFI watchdog at only
the first "bootefi" invocation. The EFI watchdog must be armed
in every EFI boot option invocation.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-02-26 07:37:01 +01:00
Simon Glass
d837cb1e3b efi: Add debugging to efi_set_bootdev()
The operation of this function can be confusing. Add some debugging so
we can see what it is doing and when it is called.

Also drop the preprocessor usage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: heinrich Schuchardt <xypron.glpk@gmx.de>
2022-02-05 20:20:01 +01:00
Ilias Apalodimas
a2f1482fc0 efi_loader: Get rid of kaslr-seed if EFI_RNG_PROTOCOL is installed
U-Boot, in some occasions, injects a 'kaslr-seed' property on the /chosen
node. That would be problematic in case we want to measure the DTB we
install in the configuration table, since it would change across reboots.

The Linux kernel EFI-stub completely ignores it and only relies on
EFI_RNG_PROTOCOL for it's own randomness needs (i.e the randomization
of the physical placement of the kernel). In fact it (blindly) overwrites
the existing seed if the protocol is installed. However it still uses it
for randomizing it's virtual placement.
So let's get rid of it in the presence of the RNG protocol.

It's worth noting that TPMs also provide an RNG.  So if we tweak our
EFI_RNG_PROTOCOL slightly and install the protocol when a TPM device
is present the 'kaslr-seed' property will always be removed, allowing
us to reliably measure our DTB.

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2022-01-15 10:57:22 +01:00
Simon Glass
7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Ilias Apalodimas
53f6a5aa86 efi_loader: Replace config option for initrd loading
Up to now we install EFI_LOAD_FILE2_PROTOCOL to load an initrd
unconditionally. Although we correctly return various EFI exit codes
depending on the file status (i.e EFI_NO_MEDIA, EFI_NOT_FOUND etc), the
kernel loader, only falls back to the cmdline interpreted initrd if the
protocol is not installed.

This creates a problem for EFI installers, since they won't be able to
load their own initrd and continue the installation. It also makes the
feature hard to use, since we can either have a single initrd or we have
to recompile u-boot if the filename changes.

So let's introduce a different logic that will decouple the initrd
path from the config option we currently have.
When defining a UEFI BootXXXX we can use the filepathlist and store
a file path pointing to our initrd. Specifically the EFI spec describes:

"The first element of the array is a device path that describes the device
and location of the Image for this load option. Other device paths may
optionally exist in the FilePathList, but their usage is OSV specific"

When the EFI application is launched through the bootmgr, we'll try to
interpret the extra device path. If that points to a file that exists on
our disk, we'll now install the load_file2 and the efi-stub will be able
to use it.

This opens up another path using U-Boot and defines a new boot flow.
A user will be able to control the kernel/initrd pairs without explicit
cmdline args or GRUB.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-25 20:14:26 +01:00
Simon Glass
c5819701a3 image: Adjust the workings of fit_check_format()
At present this function does not accept a size for the FIT. This means
that it must be read from the FIT itself, introducing potential security
risk. Update the function to include a size parameter, which can be
invalid, in which case fit_check_format() calculates it.

For now no callers pass the size, but this can be updated later.

Also adjust the return value to an error code so that all the different
types of problems can be distinguished by the user.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Bruce Monroe <bruce.monroe@intel.com>
Reported-by: Arie Haenel <arie.haenel@intel.com>
Reported-by: Julien Lenoir <julien.lenoir@intel.com>
2021-02-15 22:31:52 -05:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Heinrich Schuchardt
82d01f04fa efi_loader: switch to non-secure mode later
Some ARMv7 boards using PSCI require to be in secure-mode when booted via
'bootz' or 'bootm'. During distro-boot 'bootefi bootmgr' is called to check
if booting via UEFI is possible.

With the change we change the switch from secure mode to non-secure mode is
moved from the UEFI subsystem setup to just before calling StartImage().

Cc: Jernej Škrabec <jernej.skrabec@gmail.com>
Reported by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-29 20:22:40 +01:00
Heinrich Schuchardt
ff2f532fad efi_loader: make the UEFI boot manager configurable
Some boards are very tight on the binary size. Booting via UEFI is possible
without using the boot manager.

Provide a configuration option to make the boot manager available.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-20 08:09:34 +01:00
Heinrich Schuchardt
94686f60a2 efi_loader: implement EFI_DT_FIXUP_PROTOCOL
A boot manager like GRUB can use the protocol to

* apply U-Boot's fix-ups to the a device-tree
* let U-Boot make memory reservations according to the device-tree
* install the device-tree as a configuration table

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-13 02:38:01 +01:00
Heinrich Schuchardt
5f59518a7b efi_loader: setting boot device
Up to now the bootefi command used the last file loaded to determine the
boot partition. This has led to errors when the fdt had been loaded from
another partition after the EFI binary.

Before setting the boot device from a loaded file check if it is a PE-COFF
image or a FIT image.

For a PE-COFF image remember address and size, boot device and path.

For a FIT image remember boot device and path.

If the PE-COFF image is overwritten by loading another file, forget it.

Do not allow to start an image via bootefi which is not the last loaded
PE-COFF image.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-13 02:38:00 +01:00
Heinrich Schuchardt
bb33c79e47 efi_loader: simplify running helloworld.efi
Currently when executing 'bootefi hello' we copy helloworld.efi to the
address identified by environment variable loadaddr. This is unexected
behavior for a user. There is no need to copy helloworld.efi before
executing it after relocation.

Remove the copy action.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-13 02:38:00 +01:00
Heinrich Schuchardt
4cbb2930bd efi_loader: consider no-map property of reserved memory
The device tree may contain a /reserved-memory node. The no-map property
of the sub-nodes signals if the memory may be accessed by the UEFI payload
or not.

In the EBBR specification (https://github.com/arm-software/ebbr) the
modeling of the reserved memory has been clarified.

If a reserved memory node in the device tree has the no-map property map,
create a EfiReservedMemoryType memory map entry else use
EfiBootServicesData.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-06 07:43:56 +02:00
Heinrich Schuchardt
c2f010393b efi_loader: log messages for bootefi command
Write log messages when booting via the bootefi command to allow tracking
on the syslog server. Example messages are

    Booting /snp.efi

or

    Booting /MemoryMapped(0x0,0x4fe00000,0x35a40)
    Loading image failed

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-06 21:21:41 +02:00
Heinrich Schuchardt
72e1fcacff efi_loader: document parameters of do_bootefi_exec()
Add the missing description of the load_options parameter.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-24 16:37:53 +02:00
Heinrich Schuchardt
0ad64007fe efi_loader: set load options in boot manager
Up to now we used the value of the bootargs environment variable as load
options in the boot manager. This is not correct. The data has to be taken
from the Boot#### variable.

Let the boot manager copy the optional data of the EFI_LOAD_OPTION as load
options to the loaded image protocol.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-08 19:03:24 +02:00
Heinrich Schuchardt
1064d04920 efi_loader: factor out efi_set_load_options()
The bootefi bootmgr command has to set the load options for a loaded image
from the value of BootXXXX variable. If the boot manager is not used, the
value is set from the environment variable bootargs (or efi_selftest).

Factor out a common function efi_set_load_options().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-08 19:03:24 +02:00
Heinrich Schuchardt
c001837400 efi_loader: use logging for bootefi command
Log messages of the bootefi command instead of simply printing them to the
console.

Do not show "## Application terminated" message when the UEFI binary
completed successfully.

Adjust the python tests testing for '## Application terminated'.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22 12:32:42 +02:00
Heinrich Schuchardt
039d4f50e4 efi_loader: incorrect check against FDT_ADDR_T_NONE
With commit 0d7c2913fd ("cmd: bootefi: Honor the address & size cells
properties correctly") addr was replaced by fdt_addr. But not in the check
against FDT_ADDR_T_NONE.

Fixes: 0d7c2913fd ("cmd: bootefi: Honor the address & size cells properties
correctly")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-30 14:16:20 +02:00
Bin Meng
b1c272d18b cmd: bootefi: Fix fdt_size variable type in efi_carve_out_dt_rsv()
Variable fdt_size should be of type 'fdt_size_t', not 'fdt_addr_t'.

Fixes 0d7c2913fd: ("cmd: bootefi: Honor the address & size cells properties correctly")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-24 16:50:15 +02:00
Atish Patra
0d7c2913fd cmd: bootefi: Honor the address & size cells properties correctly
fdtdec_get_addr_size reads the uses a fixed value for address & size
cell properties which may not be correct always.

Use the auto variant of the function which automatically reads
 #address-cells & #size-cells from parent and uses to read the "reg"
property.

Signed-off-by: Atish Patra <atish.patra@wdc.com>

On 32 bit systems fdt_addr_t may be 4 bytes long but size is defined as
u64. Avoid filling the upper 4 bytes of the sizep parameter of
fdtdec_get_addr_size_auto_parent() with random bytes from the stack by
defining a separate variable fdt_size.

Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-19 09:00:38 +02:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Michael Walle
714497e327 efi_loader: round the memory area in efi_add_memory_map()
Virtually all callers of this function do the rounding on their own.
Some do it right, some don't. Instead of doing this in each caller,
do the rounding in efi_add_memory_map(). Change the size parameter
to bytes instead of pages and remove aligning and size calculation in
all callers.

There is no more need to make the original efi_add_memory_map() (which
takes pages as size) available outside the module. Thus rename it to
efi_add_memory_map_pg() and make it static to prevent further misuse
outside the module.

Signed-off-by: Michael Walle <michael@walle.cc>
Add missing comma in sunxi_display.c.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17 21:59:53 +02:00
Heinrich Schuchardt
42a426e027 efi_loader: put device tree into EfiACPIReclaimMemory
According to the UEFI spec ACPI tables should be placed in
EfiACPIReclaimMemory. Let's do the same with the device tree.

Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Grant Likely <grant.likely@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-07 18:23:16 +02:00
Heinrich Schuchardt
4fe050e65f efi_loader: remove superfluous NULL check in bootefi.c
efi_free_pool() and efi_delete_handle() both check if their argument is
NULL. The caller should not duplicate this check.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30 10:25:07 +02:00
Heinrich Schuchardt
4ef2b0d551 efi_loader: only reserve memory if fdt node enabled
Sub-nodes of /reserved-memory may be disabled. In this case we should not
reserve memory in the memory map.

Reported-by: Patrick DELAUNAY <patrick.delaunay@st.com>
Fixes: fef907b2e4 ("efi_loader: create reservations after
ft_board_setup")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-03-28 10:45:03 +01:00
Atish Patra
7be64b885a cmd: bootefi: Parse reserved-memory node from DT
Currently, bootefi only parses memory reservation block to setup
EFI reserved memory mappings. However, it doesn't parse the
reserved-memory[1] device tree node that also can contain the
reserved memory regions.

Add capability to parse reserved-memory node and update the EFI memory
mappings accordingly.

1. <U-Boot source>/doc/device-tree-bindings/reserved-memory/reserved-memory.txt]

Signed-off-by: Atish Patra <atish.patra@wdc.com>

Fix an endless loop.

The /reserved-memory node may have children without reg property. Remove
a superfluous debug statement.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17 08:29:52 +01:00
Heinrich Schuchardt
fef907b2e4 efi_loader: create reservations after ft_board_setup
Some memory reservations are made in ft_board_setup(). Ensure that we
create reserved memory map entries after ft_board_setup().

The downside of this patch is that if bootefi is called multiple times with
an devicetree argument superfluous reservations for the old copies of the
device tree will exist. But that is still better than missing a reservation.

Deleting the superfluous reservations is not possible because reservations
in the memory map are rounded to page size and may be coallesced.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17 08:29:52 +01:00
Heinrich Schuchardt
7d4d551e7d efi_loader: fix efi_install_fdt() description
In the function description use the correct parameter name.

Mention EFI_FDT_USE_INTERNAL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-19 12:53:36 +01:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Heinrich Schuchardt
a3850e40e1 efi_loader: free load options after execution
When be launch a binary via bootefi the bootargs environment variable is
used to set the load options in the loaded image protocol.

Free memory allocated for load options when the UEFI binary exits.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:20 +01:00
Heinrich Schuchardt
f64f223256 efi_loader: export efi_install_fdt()
Use a pointer to addressable memory instead of a "physical" address in the
virtual address space of the sandbox to efi_install_fdt().

Export the efi_install_fdt() function.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:20 +01:00
Heinrich Schuchardt
f9ceb6ac14 efi_loader: carve out efi_run_image()
Provide public function efi_run_imager() which can be used to run an UEFI
image from memory.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:20 +01:00
Heinrich Schuchardt
753aa18f17 efi_loader: use hardware device tree by default
If the bootefi command is called without passing the address of a device
tree, the internal device tree is used. For devices with a hardware device
tree it is preferable to used the hardware device tree in this case.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:20 +01:00
Heinrich Schuchardt
7a597259d2 efi_loader: pass address to efi_install_fdt()
As part of moving the parsing of command line arguments to do_bootefi()
call efi_install_fdt() with the address of the device tree instead of a
string.

If the address is EFI_FDT_USE_INTERNAL (= 0), the internal device tree
is used.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:20 +01:00
Simon Glass
7b51b576d6 env: Move env_get() to env.h
Move env_get() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Heinrich Schuchardt
810371a0b2 efi_loader: fix function comments in cmd/bootefi.c
Describe efi_set_bootdev().

Change function descriptions to Sphinx style.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16 22:17:19 +00:00
Bryan O'Donoghue
b225c92fd0 efi_loader: Change return type of efi_add_memory_map()
We currently have some inconsistent use of efi_add_memory_map()
throughout the code. In particular the return value of efi_add_memory_map()
is not interpreted the same way by various users in the codebase.

This patch does the following:

- Changes efi_add_memory_map() to return efi_status_t.
- Adds a method description to efi_add_memory_map().
- Changes efi_add_memory_map() to return EFI_SUCCESS
- Returns non-zero for error in efi_add_memory_map()
- Updates efi_allocate_pages() to new efi_add_memory_map()
- Updates efi_free_pages() to new efi_add_memory_map()
- Updates efi_carve_out_dt_rsv() to new efi_add_memory_map()
- Updates efi_add_runtime_mmio()  to new efi_add_memory_map()

Fixes: 5d00995c36 ("efi_loader: Implement memory allocation and map")
Fixes: 74c16acce3 ("efi_loader: Don't allocate from memory holes")
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Alexander Graf <agraf@csgraf.de>
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16 22:17:17 +00:00