Commit graph

27 commits

Author SHA1 Message Date
Etienne Carriere
9e69696506 dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSI
Add OP-TEE firmware node in stm32mp15 U-Boot DTSI. This node is
needed since commit [1] that changed U-Boot/stm32mp15 to detect
OP-TEE availability by probing the resource instead of relying on
U-Boot configuration. The software sequence implemented by [1] is
fine but U-Boot DTS/DTSI files were not updated accordingly since,
hence OP-TEE presence is never detected by U-Boot, preventing Linux
kernel from using OP-TEE resources.

For consistency and to synchronize stm32mp15 DTSI files (excluding
U-Boot specific DTSI files) with the Linux kernel ones, this change
also moves the OP-TEE reserved memory nodes from board generic DTSI
files to U-Boot specific board DTSI files.

Link: [1] commit 43df0a159d ("stm32mp1: dynamically detect op-tee presence")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-16 10:39:28 +02:00
Patrick Delaunay
1b28a5e2b0 ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2
DT alignment with Linux 5.7-rc2, including the kernel commits

431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards
79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards
877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards
7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards
f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1
d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x
b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c
1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1
bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1
b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx
a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards
8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1
fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board
cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151
c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1
9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15
82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151
8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node
a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1
4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1
80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1
ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
4a1b975dac board: stm32mp1: reserve memory for OP-TEE in device tree
Add reserve memory for OP-TEE in U-Boot and in kernel device tree:
- no more reduce the DDR size in "memory" node:
  CONFIG_SYS_MEM_TOP_HIDE is no more used
- U-Boot device-tree defines the needed "reserved-memory" for OP-TEE
  and U-Boot should not use this reserved memory: board_get_usable_ram_top
  use lmb lib to found the first free region, the not reserved
  memory, enough to relocate U-Boot: the needed size of U-Boot
  is estimated with gd->mon_len + CONFIG_SYS_MALLOC_LEN.
- the optee node ("optee@...": firmware with compatible "linaro,optee-tz")
  and the associated "reserved-memory" are deactivated in kernel device
  tree when OP-TEE is not detected by U-Boot to prevent kernel issue
  (memory is reserved but not used, optee driver probe failed).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
1a4f57c895 ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
This commit manages diversity for STM32M15x SOCs with:
- dedicated files to support all STM32MP15 SOCs family.
  The differences between those SOCs are:
  -STM32MP151 [1]: common file.
  -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU.
  -STM32MP157 [3]: STM32MP153 + DSI + GPU.
- new files to manage security diversity on STM32MP15x SOCs.
  On STM32MP15xY, "Y" gives information:
  -Y = A means no cryp IP and no secure boot.
  -Y = C means cryp IP + secure boot.
- stm32mp157 pinctrl files to better manage package diversity.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:18:36 +01:00
Patrick Delaunay
d35a5af321 ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7
Device tree and binding alignment with kernel v5.5-rc7

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:26:22 +01:00
Patrick Delaunay
7915b9914e stm32mp1: pwr: use the last binding for pwr
Update the driver to use the latest binding from kernel v5.5-rc1:
no more use syscon or regmap to access to pwr register and
only one pwr_regulators node with the compatibility "st,stm32mp1,pwr-reg"
is available.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:26:22 +01:00
Patrick Delaunay
4d7d0e2e78 ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1
Update the sdmmc2 node for eMMC support on eval board stm32mp157c-ev1.
- update slew-rate for pin configuration
- update "vqmmc-supply"
- remove "st,sig-dir"
- add mandatory "pinctrl-names"
- add "mmc-ddr-3_3v"

This patch solve the eMMC detection issue for command "mmc dev 1".

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26 10:11:48 +01:00
Patrick Delaunay
62d620c243 ARM: dts: stm32: DT alignment with kernel v5.4-rc4
Device tree and binding alignment with kernel v5.4-rc4

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26 10:11:48 +01:00
Patrick Delaunay
e07a86b5e3 ARM: dts: stm32: DT alignment with kernel v5.3
Device tree and binding alignment with kernel v5.3
and converted to SPDX.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26 10:11:48 +01:00
Patrick Delaunay
5d2901a4b6 stm32mp1: Add remoteproc support for m4 coprocessor
Alignment with kernel patch proposal for binding:

[PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c
https://lkml.org/lkml/2019/5/14/159

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
5e959ab85e stm32mp1: board: Update the way vdd-supply is retrieved from DT
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply
and is a subnode of pwr-regulators.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
fe91533644 ARM: dts: stm32mp1: sync device tree with v5.3-rc2
Synchronize device tree with v5.3-rc2 label and
update the associated u-boot dtsi.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
35a54d41d9 ARM: dts: stm32mp1: sync device tree with v5.2-rc4
Synchronize device tree with v5.2-rc4 label and
update the associated u-boot dtsi.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2019-07-12 11:18:53 +02:00
Fabien Dessenne
1958dae4f3 ARM: dts: stm32: Add ipcc mailbox support on stm32mp1
Add IPCC mailbox support on stm32mp157 eval and disco boards.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-12 11:18:53 +02:00
Tom Rini
c2bb9c5b9e STM32 MCUs update:
_ DT rework and alignment with DT kernel v4.20
 _ mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20
 _ mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20
 _ configs: update for F746/769 boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvxeXAAoJEMrHeC97M/+mkpgP/0Xi+pN81lXGEELdVARyu3o9
 g45Ap+xgARgMwtnwtDmx/7tbawieG7F7Gq/AcY+SOod4qIUfb+1LZ/7UMikzXfbG
 VsSFm1YtxTiHIldPAs+i5MU0OO8TphHpqEtI7kj6eAa3MwYYnhd4DTqI/qahexeU
 3FXnUZg6XhURj1Hp/k4lL+8aoEgQKrjPpSq6oKtbF2rUStwyWbZ2PDYbI19RCU6I
 So58wSQYt0W5CP/dbUDydKorjLirHEvj7ppiGMjwaFjSdipOblrinjLSJ2fVPosF
 EK5lG3AOdf4telYafuq2Ur6EXdGOP1HHdsRhUYBCbZchzGLbH2sGdAs2xHUEsxzV
 80+uE5grX46yAQAj2V8ogpIrP6E4PA4pwEZctsS+4tgUhz9NO7kxFooGmNUk5BkY
 ggtXRlYlmXEz+epoXL7Hr5XkHOObkPk5W/R8JiZqRNv4y3NovYbjqAwYYhPCG60k
 jzwT3BdZJDN28gBU57d60VPEhPQHzpoXc6v3rJ08uFhFms03iz7pj9gCsreF48A9
 jQPZ2nemFt4m4LBsKtihLhvb6t6EllOBkCvbYCD6zgebcjUOscJTq3/TnHrMiNBh
 6wUorR09Bn7iMqhs/rPzUUmwDSN9O78P6uBr/D1E8zA9t/mCPHJHVbUHzrB96UGI
 LA7QA1pWbuYtoVSYa09W
 =0eSL
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-mcu-20190423' of https://github.com/pchotard/u-boot

STM32 MCUs update:
- DT rework and alignment with DT kernel v4.20
- mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20
- mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20
- configs: update for F746/769 boards
2019-04-24 12:26:39 -04:00
Patrice Chotard
c89b87cbfc ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1
Update some sdmmc properties which have been updated with
v4.19 DT bindings:
      - st,dirpol becomes st,sig-dir
      - st,negedge becomes st,neg-edge
      - st,pin-ckin becomes st,use-ckin

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:56 +02:00
Patrick Delaunay
c50151d43f phy: usbphyc: Binding update of vdda supply
Move supply vdda1v1 and vdda1v8 in usbphyc node and
no more in port

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:51 +02:00
Patrice Chotard
2366160eb2 ARM: dts: stm32: Synchronize DT with kernel one
This patch synchronizes U-boot DT with kernel one
This is based on https://patchwork.kernel.org/cover/10797115/

This patch adds initial support of STM32MP157 discovery boards:
  - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1).
    This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
    and 512MB of DDR3. Several connections are available on this boards:
    4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

  - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2).
    This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a)
    and Murata wifi/BT combo is added.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
42f01aacfd power: rename stpmu1 to official name stpmic1
Alignment with kernel driver name & binding
introduced by https://patchwork.kernel.org/cover/10761943/
to use the final marketing name = STPMIC1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
d46c22b3fd power: stpmu1: rename files to stpmic1
Prepare file modification for kernel alignment and
rename driver to stpmic1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Benjamin Gaignard
075b0185b6 pinctrl: stm32: make pinctrl use hwspinlock
Protect configuration registers with a hardware spinlock.

If a hwspinlock is defined in the device-tree node used it
to be sure that none of the others processors on the SoC could
change the configuration at the same time.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06 23:26:33 -05:00
Benjamin Gaignard
9119f547d3 hwspinlock: add stm32 hardware spinlock support
Implement hardware spinlock support for STM32MP1.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06 23:26:33 -05:00
Patrice Chotard
1c547bf732 ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1
Add usbotg_hs regulator to allow to use the USB mass-storage
feature on OTG usb port.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-10-10 13:32:40 -04:00
Patrick Delaunay
a674313c2c dts: import stm32mp1 device tree from linux kernel
This patch rebase the stm32mp1 device tree source from
linux kernel v4.18-rc1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20 15:55:05 -04:00
Patrice Chotard
21299d3a68 ARM: dts: stm32mp157c-ed1: Add regulator node
Add regulator nodes needed by stpmu1 regulator driver
Add vmmc-supply and vqmmc-supply regulator property for
sdmmc1 and sdmmc2.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-08 09:07:39 -04:00
Patrick Delaunay
0ed232b153 stm32mp1: add eMMC support for ED1
Add command GPT support
Add EMMC boot support
Add the 2 other SDMMC instances for ED1:
- SDMMC2 = mmc 1, eMMC on the ED1 board
- SDMMC3 = extension connector, deactivated by default

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06 20:45:28 -04:00
Patrick Delaunay
3d2d115a30 dts: add device tree for STM32MP157C-ED1 board
Add minimal devicetree for STM32MP157C-ED1 board,
with only the devices to allow boot from SDCARD:
- RCC for clock and reset
- UART4 for console
- I2C and PMIC
- DDR
- SDMMC0 for SDCard

Waiting Kernel upstream for alignment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00