Commit graph

92 commits

Author SHA1 Message Date
Tuomas Tynkkynen
2239690aca i2c: Drop CONFIG_SH_SH7734_I2C
Last user of this driver went away in May 2017 in commit
eb5ba3aefd ("i2c: Drop use of CONFIG_I2C_HARD").

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Acked-by: Heiko Schocher <hs@denx.de>
2018-05-23 17:30:04 -04:00
Tuomas Tynkkynen
d70c79fa89 i2c: Drop CONFIG_TSI108_I2C
Last user of this driver went away in June 2015 in commit
d928664f41 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support")

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Acked-by: Heiko Schocher <hs@denx.de>
2018-05-23 17:30:04 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Jagan Teki
c4e68d3aa8 dm: MIGRATION: Add migration plan for DM_SPI & DM_SPI_FLASH
Due to adding various new functionalities with SPI and SPI-FLASH
subsystems which are rounding in Mailing list for year these long
term supporting spi driver which never seen any update with
driver-model conversion.

So added migration plan for DM_SPI and DM_SPI_FLASH with
deadline v2018.09

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-03-16 10:26:14 -04:00
Simon Glass
0d15463c05 dtoc: Rename the phandle struct
Rather than naming the phandle struct according to the number of cells it
uses (e.g. struct phandle_2_cell) name it according to the number of
arguments it has (e.g. struct phandle_1_arg). This is a more intuitive
naming.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
d944bf6b5e dm: core: Add livetree documentation
Add some documentation for the live device tree support in U-Boot. This
was missing from the initial series.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-04 02:10:06 -06:00
Simon Glass
302466d07f dm: Add migration plan for CONFIG_BLK
The CONFIG_BLK conversion involves quite invasive changes in the U-Boot
code, with #ifdefs and different code paths. We should try to move over to
this soon so we can drop the old code.

Set a deadline of 9 months for this work, rounded up to the next release.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-04 02:10:06 -06:00
Simon Glass
2cce586651 dtoc: Support multiple compatible strings in a node
Sometimes a node will have multiple compatible strings. Drivers may use
one or the other so the best approach seems to be to #define them to be
equivalent.

Update dtoc to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-07-11 10:08:19 -06:00
mario.six@gdsys.cc
2a792753d6 dm: Add callback to modify the device tree
Certain boards come in different variations by way of utilizing daughter
boards, for example. These boards might contain additional chips, which
are added to the main board's busses, e.g. I2C.

The device tree support for such boards would either, quite naturally,
employ the overlay mechanism to add such chips to the tree, or would use
one large default device tree, and delete the devices that are actually
not present.

Regardless of approach, even on the U-Boot level, a modification of the
device tree is a prerequisite to have such modular families of boards
supported properly.

Therefore, we add an option to make the U-Boot device tree (the actual
copy later used by the driver model) writeable, and add a callback
method that allows boards to modify the device tree at an early stage,
at which, hopefully, also the application of device tree overlays will
be possible.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23 15:46:23 +01:00
Heiko Stübner
27326c7ee2 dm: allow limiting pre-reloc markings to spl or tpl
Right now the u-boot,dm-pre-reloc flag will make each marked node
always appear in both spl and tpl. But systems needing an additional
tpl might have special constraints for each, like the spl needing to
be very tiny.

So introduce two additional flags to mark nodes for only spl or tpl
environments and introduce a function dm_fdt_pre_reloc to automate
the necessary checks in code instances checking for pre-relocation
flags.

The behaviour of the original flag stays untouched and still marks
a node for both spl and tpl.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:44 -06:00
Simon Glass
e160f7d430 dm: core: Replace of_offset with accessor
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:12:14 -07:00
Simon Glass
6ccb410124 dm: Add timeline and guide for porting I2C drivers
Add a README with a brief guide to porting i2c drivers over to use driver
model.

Add a timeline also. All I2C drivers should be converted by the end
of June 2017.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05 13:28:12 +01:00
Simon Glass
ebb2c53585 serial: Drop the s3c24x0 serial driver
This is not used by any boards. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-12-04 13:55:00 -05:00
Simon Glass
8ff89f8db8 serial: Update docs to indicate mcfuart supports DM_SERIAL
This driver was converted so we should remove it from the list.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-04 13:54:59 -05:00
Simon Glass
1269625177 dm: Update the of-platdata README for the new features
Revise the content based on the v2 additions. This is kept as a separate
patch to avoid confusing those who have already reviewed the v1 series.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>
2016-07-14 20:40:24 -06:00
Simon Glass
39782afb1a dm: Add a README for of-platdata
Add documentation on how this works, including the benefits and drawbacks.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Stephen Warren
daac3bfee5 dm: allow setting driver_data before/during bind
This will allow a driver's bind function to use the driver data. One
example is the Tegra186 GPIO driver, which instantiates child devices
for each of its GPIO ports, yet supports two different HW instances each
with a different set of ports, and identified by the udevice_id .data
field.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-26 20:48:31 -06:00
Jagan Teki
e57f9c8eef doc: driver-model: Update dm tests run using test.py
Since all the tests are implemented in pytest infrastructure,
So update the dm tests with the same instead of ./test/dm/test-dm.sh

Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-04-14 11:51:39 -06:00
Michal Simek
508770ae37 dm: Remove ARM dcc from the list
Remove ARM Debug communication channel driver from the list
of not converted drivers to DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-24 18:44:14 -05:00
Simon Glass
92d05e50d9 dm: Update on current serial driver status
Update the README to reflect the current status.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-08 10:10:43 -05:00
Michal Simek
93768393d7 serial: uartlite: Move driver to DM
Enable SPL DM too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27 15:55:49 +01:00
Bin Meng
fdbae099bf serial: lpuart: Add driver model serial support
This adds driver model support to lpuart serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Tested-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2016-01-20 19:10:14 -07:00
Thomas Chou
11b35d557b serial-howto: remove altera_jtag_uart and altera_uart from the list
Since both altera_jtag_uart and altera_uart are converted to driver
model, remove them from the list of drivers remaining to convert.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Chin Liang See <clsee@altera.com>
2015-12-19 09:51:19 +08:00
Kamil Lulko
665624149a stm32: Convert serial driver to DM
Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-12 15:56:08 -05:00
Simon Glass
1d149eddcc dm: Add timeline and guide for porting serial drivers
Add a README with a brief guide to porting serial drivers over to use
driver model.

Add a timeline also. All serial drivers should be converted by the end
of January 2016.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-20 13:59:54 -05:00
Simon Glass
bcbe3d1579 dm: Rename dev_get_parentdata() to dev_get_parent_priv()
The current name is inconsistent with other driver model data access
functions. Rename it and fix up all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-23 09:42:28 -06:00
Nishanth Menon
ddf56bc7e3 drivers: Introduce a simplified remoteproc framework
Many System on Chip(SoC) solutions are complex with multiple processors
on the same die dedicated to either general purpose of specialized
functions. Many examples do exist in today's SoCs from various vendors.
Typical examples are micro controllers such as an ARM M3/M0 doing a
offload of specific function such as event integration or power
management or controlling camera etc.

Traditionally, the responsibility of loading up such a processor with a
firmware and communication has been with a High Level Operating
System(HLOS) such as Linux. However, there exists classes of products
where Linux would need to expect services from such a processor or the
delay of Linux and operating system being able to load up such a
firmware is unacceptable.

To address these needs, we need some minimal capability to load such a
system and ensure it is started prior to an Operating System(Linux or
any other) is started up.

NOTE: This is NOT meant to be a solve-all solution, instead, it tries to
address certain class of SoCs and products that need such a solution.

A very simple model is introduced here as part of the initial support
that supports microcontrollers with internal memory (no MMU, no
execution from external memory, or specific image format needs). This
basic framework can then (hopefully) be extensible to other complex SoC
processor support as need be.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:38 -04:00
Bin Meng
f4b5db7c53 dm: pci: Document binding of pci device drivers
Document how pci devices are bound to device drivers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:18 -07:00
Bin Meng
947eb4396d doc: dm: Update pci-info.txt for pci support
Correct two typos and mention how pci bus will be probed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:38 -06:00
Simon Glass
97f3ee34b6 dm: Add platform data advice and admonishment
We should guide people more strongly towards device tree to avoid the
proliferation of platform data structures. Add documentation to the driver
model README, and also the platform data header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:30 -06:00
Przemyslaw Marczak
769c94865a doc: driver-model: pmic-framework.txt - cleanup
This commit cleanups the PMIC framework documentation.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Przemyslaw Marczak
fdea8bbbc8 doc: driver-model: pmic and regulator uclass documentation
Since this framework is still under the construction, the main
documentation is kept in the header files.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:38 -06:00
Simon Glass
98a1605309 dm: Update the README to reflect the current test output
There are a lot more tests now. To avoid confusion add the updated test
output to the driver model README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-22 11:15:02 -06:00
Simon Glass
5fd2733e5a dm: usb: Add a README for driver model
Add some documentation describing how USB is implemented with USB. This
might make things easier for people to understand.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:30 -06:00
Simon Glass
ff3e077bd2 dm: pci: Add a uclass for PCI
Add a uclass for PCI controllers and a generic one for PCI devices. Adjust
the 'pci' command and the existing PCI support to work with this new uclass.
Keep most of the compatibility code in a separate file so that it can be
removed one day.

TODO: Add more header file comments to the new parts of pci.h

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:43 -06:00
Simon Glass
f94a1bed07 dm: Expand and complete Kconfig in drivers/
Expand the help messages for each driver. Add missing Kconfig for I2C,
SPI flash and thermal.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:33 -07:00
Simon Glass
2017aaef8c dm: Update documentation for new bus features
Now that we have new bus features, update README.txt and the SPI docs to
explain these.
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:57 -07:00
Simon Glass
9cc36a2b89 dm: core: Add a flag to control sequence numbering
At present we try to use the 'reg' property and device tree aliases to give
devices a sequence number. The 'reg' property is often actually a memory
address, so the sequence numbers thus-obtained are not useful. It would be
better if the devices were just sequentially numbered in that case. In fact
neither I2C nor SPI use this feature, so drop it.

Some devices need us to look up an alias to number them within the uclass.
Add a flag to control this, so it is not done unless it is needed.

Adjust the tests to test this new behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
2f3b95dbc7 dm: core: Set device tree node for root device
The root device corresponds to the root device tree node, so set this up.
Also add a few notes to the documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:54 -07:00
Masahiro Yamada
33fcd1bbd5 dm: README: recommend u-boot.dtb to try driver-model on sandbox
To enjoy driver-model on sandbox, using device tree is recommended.
While we are here, change sandbox_config to sandbox_defconfig too.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-01-05 17:45:15 -07:00
Simon Glass
38687ae676 dm: Update documentation to include CONFIG_DM... options
Add documentation for the various driver model options that are now
available.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 08:14:27 +01:00
Simon Glass
4324174d03 test: dm: Add additional GPIO tests
Add tests for gpio_requestf() and for memory leaks.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:53 -06:00
Simon Glass
d44f597b12 dm: gpio: Add gpio_requestf() helper for printf() strings
Add a helper which permits a printf()-style format string for the requester
string.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:52 -06:00
Simon Glass
4b8f11c2cc test: dm: Update GPIO tests for new gpio_request() method
Now that gpio_request() is handled by the uclass, updates the tests
accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:52 -06:00
Simon Glass
6126c8e886 dm: spi: Add documentation on how to convert over SPI drivers
This README is intended to help maintainers move their SPI drivers over to
driver model. It works through the required steps with an example.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:49 -06:00
Simon Glass
547cea19b8 dm: core: Add a clarifying comment on struct udevice's seq member
The sequence number is unique within the uclass, so state this clearly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:46 -06:00
Simon Glass
a8981d4f80 dm: core: Add functions for iterating through device children
Buses need to iterate through their children in some situations. Add a few
functions to make this easy.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:45 -06:00
Simon Glass
a327dee0f4 dm: Add child_pre_probe() and child_post_remove() methods
Some devices (particularly bus devices) must track their children, knowing
when a new child is added so that it can be set up for communication on the
bus.

Add a child_pre_probe() method to provide this feature, and a corresponding
child_post_remove() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
e59f458de6 dm: Introduce per-child data for devices
Some device types can have child devices and want to store information
about them. For example a USB flash stick attached to a USB host
controller would likely use this space. The controller can hold
information about the USB state of each of its children.

The data is stored attached to the child device in the 'parent_priv'
member. It can be auto-allocated by dm when the child is probed. To
do this, add a per_child_auto_alloc_size value to the parent driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
997c87bb0b dm: Add functions to access a device's children
Devices can have childen that can be addressed by a simple index, the
sequence number or a device tree offset. Add functions to access a child
in each of these ways.

The index is typically used as a fallback when the sequence number is not
available. For example we may use a serial UART with sequence number 0 as
the console, but if no UART has sequence number 0, then we can fall back
to just using the first UART (index 0).

The device tree offset function is useful for buses, where they want to
locate one of their children. The device tree can be scanned to find the
offset of each child, and that offset can then find the device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00