Commit graph

124 commits

Author SHA1 Message Date
Michal Simek
46e765226c arm64: zynqmp: Cover ultra96 dts file by MAINTAINERS fragment
Avnet Ultra96 dts file should be also cover by MAINTAINERS fragment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-21 10:07:11 -04:00
Stefan Roese
06985289d4 watchdog: Implement generic watchdog_reset() version
This patch tries to implement a generic watchdog_reset() function that
can be used by all boards that want to service the watchdog device in
U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG.

Without this approach, new boards or platforms needed to implement a
board specific version of this functionality, mostly copy'ing the same
code over and over again into their board or platforms code base.

With this new generic function, the scattered other functions are now
removed to be replaced by the generic one. The new version also enables
the configuration of the watchdog timeout via the DT "timeout-sec"
property (if enabled via CONFIG_OF_CONTROL).

This patch also adds a new flag to the GD flags, to flag that the
watchdog is ready to use and adds the pointer to the watchdog device
to the GD. This enables us to remove the global "watchdog_dev"
variable, which was prone to cause problems because of its potentially
very early use in watchdog_reset(), even before the BSS is cleared.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Marek Behún" <marek.behun@nic.cz>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Maxim Sloyko <maxims@google.com>
Cc: Erik van Luijk <evanluijk@interact.nl>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: "Álvaro Fernández Rojas" <noltari@gmail.com>
Cc: Philippe Reynes <philippe.reynes@softathome.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
2019-04-26 09:16:32 +02:00
Siva Durga Prasad Paladugu
c7490907d1 arm64: zynqmp: Add idcode for new RFSoC silicon ZU39DR
This patch adds "zu39dr" to the list of zynqmp devices
The zu39DR is the new RFSoC silicon with id value of 0x66.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
T Karthik Reddy
be52372ff1 arm64: zynqmp: Use zynqmp_mmio_read/write functions
Changed the return type of reset_reason() to int from u32, because
zynqmp_mmio_read/write() returns signed value on error.
Replaced readl and writel functions with zynqmp_mmio_read &
zynqmp_mmio_write functions to access RESET_REASON(CRL_APB) registers.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
Stefan Roese
ccd063e981 watchdog: Move watchdog_dev to data section (BSS may not be cleared)
This patch moves all instances of static "watchdog_dev" declarations to
the "data" section. This may be needed, as the BSS may not be cleared
in the early U-Boot phase, where watchdog_reset() is already beeing
called. This may result in incorrect pointer access, as the check to
"!watchdog_dev" in watchdog_reset() may not be true and the function
may continue to run.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Marek Behún" <marek.behun@nic.cz>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2019-04-08 09:21:39 -04:00
Michal Simek
91d7e0c47f arm64: zynqmp: Create fdtfile from compatible string
distro boot expects that fdtfile name is setup for alternative DTB.
Create this file based on the first platform compatible string.
This should ensure that one rootfs can store multiple DTBs for different
boards.
Reflect structure which is used in Linux kernel. It means dtbs are
strored in xilinx folder.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2019-02-15 15:04:01 +01:00
Michal Simek
9755e3db8b xilinx: Move zynq_board_read_rom_ethaddr to shared location
Zynq and ZynqMP are sharing similar code and there is no reason to do
code duplication. Move zynq_board_read_rom_ethaddr() to common file for
easier conversion to DM.
Use ZynqMP version that's why also add CONFIG_ZYNQ_EEPROM_BUS to Syzygy
which is only one Zynq board which is using this feature.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-14 14:31:09 +01:00
Michal Simek
4c84844715 arm64: zynqmp: Fix tcminit help text alignment
Trivial patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:43 +01:00
Siva Durga Prasad Paladugu
e7c9de6617 arm64: zynqmp: Fix mmc node names to be in sync with kernel
This patches renames sd nodes in dts to be in line with
kernel. This patch also modifies the references for the same
in code.
It checks mmc first to have no time penalty for new DT node names based
on left-to-right expression evaluation.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:42 +01:00
Michal Simek
0bf3f9cb27 arm64: zynqmp: Protect board_late_init function
Function should be compiled only when CONFIG_BOARD_LATE_INIT is defined.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:42 +01:00
Michal Simek
ebcc1a223e arm64: zynqmp: Wire mini-emmc1 configuration with zcu102
For testing purpose use zcu102 which has SD at controller 1 and this can
be used for testing this mini configuration.

U-Boot 2018.11-00279-gdc482e7ee092 (Nov 30 2018 - 10:22:56 +0100)

Model: ZynqMP MINI EMMC1
Board: Xilinx ZynqMP
DRAM:  512 MiB
EL Level:       EL3
MMC:   sdhci@ff170000: 0
In:    dcc
Out:   dcc
Err:   dcc
ZynqMP>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:26 +01:00
Michal Simek
f5ed777d29 arm64: zynqmp: Wire mini-emmc0 configuration with zcu100
For testing purpose use zcu100 which has SD at controller 0 and this can
be used for testing this mini configuration.

U-Boot 2018.11-00281-gc5d48466e76e (Nov 30 2018 - 10:41:05 +0100)

Model: ZynqMP MINI EMMC0
Board: Xilinx ZynqMP
DRAM:  512 MiB
EL Level:       EL3
MMC:   sdhci@ff160000: 0
In:    dcc
Out:   dcc
Err:   dcc
ZynqMP>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:26 +01:00
Michal Simek
e615f39e7f arm64: zynqmp: Start usb ethernet gadget automatically
If only usb ethernet gadget is enabled it can start automatically.
If more gagdets are enabled usb ethernet gadget can be bind by
"bind /amba/usb1@ff9e0000/dwc3@fe300000 usb_ether" (on zcu100)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:26 +01:00
Michal Simek
ee97a9996a arm64: zynqmp: Add mini mtest configuration
This configuration is useful when you want to run small u-boot and
perform DDR memory test to make sure that DDR is properly configured.
It is use for board bringup because alternative u-boot memory tests is
quite good.
Configuration is running out of OCM.

As is done for others mini configurations 0x80 bytes for variables is
enough and only default variables are stored there.

Alternative memtest is enabled and also 2GB of DDR via DTS files.
Configuration is enabling ZYNQMP_PSU_INIT_ENABLED and include psu_init()
from zcu102 for testing purpose.
In case of size issue this can be moved to SPL configuration as is done
for mini_qspi configuration but it is not a problem now.

Log:
U-Boot 2018.11-00268-gbd58b8ba8915 (Nov 29 2018 - 15:33:35 +0100)

Model: ZynqMP MINI
Board: Xilinx ZynqMP
DRAM:  WARNING: Initializing TCM overwrites TCM content
2 GiB
EL Level:       EL3
In:    dcc
Out:   dcc
Err:   dcc
ZynqMP>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-30 10:45:26 +01:00
Michal Simek
a837cfe5b2 arm64: zynqmp: Enable SPL for mini qspi configuration
Wire up mini_qspi SPL with zcu102 for testing purpose.
Normally mini u-boot runs with FSBL/SPL for certain board.
Enabling SPL and configuration from zcu102 helps with testing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29 15:13:57 +01:00
Siva Durga Prasad Paladugu
5473f245d0 arm64: zynqmp: Fix logic in CG/EG/EV detection
The VCU disable bit(8) in IP disable register of efuse
is valid only if PL powered up and hence PL powerup status
has to be considered while determining the CG part also.
This patch considers the PL powerup status and ignores the VCU
disable bit if PL not powered up.
This fixes the issue of "unknown" id for CG parts if PL not powered up
and VCU bit(8) is not set.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-26 10:50:54 +01:00
Siva Durga Prasad Paladugu
5860bc16b9 arm64: zynqmp: Add new command for TCM initialization
This patch adds new zynqmp command "zynqmp tcminit mode" to
initialize TCM. TCM needs to be initialized before accessing
to avoid ECC errors. This new command helps to perform
the same. It also makes tcm_init() as global and uses it for
doing the TCM initialization.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 16:53:24 +02:00
Siva Durga Prasad Paladugu
b94a8271cc arm64: zynqmp: Return pmufw version for zynqmp_pmufw_version()
Modify the zynqmp_pmufw_version() routine to return PMUFW version so
that it can be reused wherever required. Get PMUFW version from PMU
only once at bootup and later just return stored value.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-26 10:15:00 +02:00
Tom Rini
b1aad8dbe2 zynqmp: Add avnet_ultra96_rev1_defconfig to the lits of boards
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-07 11:36:39 -04:00
Michal Simek
2570e12960 arm64: zynqmp: Add support for Avnet Ultra96
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files
and point to origin internal board name.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06 08:44:35 +02:00
Siva Durga Prasad Paladugu
12308b128f lib: fdtdec: Rename routine fdtdec_setup_memory_size()
This patch renames the routine fdtdec_setup_memory_size()
to fdtdec_setup_mem_size_base() as it now fills the
mem base as well along with size.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-19 10:49:56 +02:00
Vipul Kumar
0358cee595 arm64: zynqmp: Added support of mmio read and write commands
This patch added support of mmio read and write commands. These commands
can be used to read and write registers from the u-boot command line.
It can be useful in debugging.

Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:56 +02:00
Vipul Kumar
8c258e6245 arm64: zynqmp: Changed zynqmp command to handle subcommands with U_BOOT_CMD_MKENT
This patch changed zynqmp command to handle subcommands with
U_BOOT_CMD_MKENT.

Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:55 +02:00
Michal Simek
1fbca0db5d arm64: zynqmp: Try to enable the first watchdog via aliases
Add support for enabling the first watchdog pointed via aliases.

DT fragment:
	aliases {
		...
		watchdog0 = &watchdog0;
		watchdog1 = &watchdog_lpd;
		...
	};

dm tree fragment for above configuration with patch applied:
ZynqMP> dm tree
 Class    index  Probed  Driver      Name
-----------------------------------------
...
 watchdog    0  [   ]   cdns_wdt    |   |-- watchdog@ff150000
 watchdog    1  [ + ]   cdns_wdt    |   `-- watchdog@fd4d0000
...

dm uclass fragment:
ZynqMP> dm uclass
...
uclass 75: watchdog
0   watchdog@ff150000 @ 7df02f40, seq -1, (req 1)
1 * watchdog@fd4d0000 @ 7df02ff0, seq 0, (req 0)
...

It is visible that index 1 is IP with seq 0 which means that FPD
watchdog (@fd4d0000) is in DT below LPD watchdog (@ff150000).

Till this patch the first watchdog found in DT was used and started
which is not enabling all possible configuration based on user request.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:55 +02:00
Luca Ceresoli
6da4f67ad0 arm/arm64: zynq/zynqmp: pass the PS init file as a kconfig variable
U-Boot needs to link ps7_init_gpl.c on Zynq or psu_init_gpl.c on
ZynqMP (PS init for short). The current logic to locate this file for
both platforms is:

 1. if a board-specific file exists in
    board/xilinx/zynq[mp]/$(CONFIG_DEFAULT_DEVICE_TREE)/ps?_init_gpl.c
    then use it
 2. otherwise use board/xilinx/zynq/ps?_init_gpl.c

In the latter case the file does not exist in the U-Boot sources and
must be copied in the source tree from the outside before starting the
build. This is typical when it is generated from Xilinx tools while
developing a custom hardware. However making sure that a
board-specific file is _not_ found (and used) requires some trickery
such as removing or overwriting all PS init files (e.g.: the current
meta-xilinx yocto layer).

This generates a few problems:

 * if the source tree is shared among different out-of-tree builds,
   they will pollute (and potentially corrupt) each other
 * the source tree cannot be read-only
 * any buildsystem must add a command to copy the PS init file binary
 * overwriting or deleting files in the source tree is ugly as hell

Simplify usage by allowing to pass the path to the desired PS init
file in kconfig variable XILINX_PS_INIT_FILE. It can be an absolute
path or relative to $(srctree). If the variable is set, the
user-specified file will always be used without being copied
around. If the the variable is left empty, for backward compatibility
fall back to the old behaviour.

Since the issue is the same for Zynq and ZynqMP, add one kconfig
variable in a common place and use it for both.

Also use the new kconfig help text to document all the ways to give
U-Boot the PS init file.

Build-tested with all combinations of:
 - platform: zynq or zynqmp
 - PS init file: from XILINX_PS_INIT_FILE (absolute, relative path,
   non-existing), in-tree board-specific, in board/xilinx/zynq[mp]/
 - building in-tree, in subdir, in other directory

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:53 +02:00
Michal Simek
1e3e68f109 arm64: zynqmp: Check return value from calloc
calloc() can fail and return NULL. The patch is checking return value
and return in case of error.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-15 08:54:05 +02:00
Michal Simek
2882b39d56 arm64: zynqmp: Setup the first boot_target at run time
Detect mmc alias at run time for setting up proper boot_targets sequence.
The first target has to correspond with boot mode.

The purpose of this patch is to get rid of CONFIG_ZYNQ_SDHCI0/1
parameters in full U-Boot.
Unfortunately this patch can't remove it because there is missing
mmc implementation for SPL_DM_SEQ_ALIAS.

Also xilinx_zynqmp.h only setup boot commands for mmc0 and mmc1.
It means using aliases with higher number won't work. But switching
between mmc0 and mmc1 should work properly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-05-31 13:50:39 +02:00
Michal Simek
d348beaa63 arm64: zynqmp: Show reset reason
Read reset reason reg and show it in log and also save it as variable.
Clearing reset reason when it is read to show only one status

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Michal Simek
b4af64fdfd arm64: zynqmp: Use DWC3 generic driver and DM_USB
Remove harcoded XHCI lists and detect mode, speed based on DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Serial-changes: 2
- Remove also XHCI macros from hardware.h
- Remove additional new line in zcu106
2018-05-18 13:23:15 +02:00
Tom Rini
57a72d0560 SPDX: Correct SPDX tags from recent xilinx merge
Correct the SPDX tag format.

Fixes: 3b52847a45 ("Merge tag 'xilinx-for-v2018.07' of git://www.denx.de/git/u-boot-microblaze")
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-11 14:54:57 -04:00
Siva Durga Prasad Paladugu
d1f4e39d58 mmc: zynq_sdhci: Add support for SD3.0
This patch adds support of SD3.0 for ZynqMP.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 11:13:51 +02:00
Michal Simek
0478b0b9b6 arm64: zynqmp: Simplify boot_target variable composition
Call calloc for space allocation only at one location and include if/else
to sprintf. This will simplify run time device adding based on id aliases.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-05-11 09:23:43 +02:00
Nitin Jain
0678941ae5 arm64: zynqmp: Setup MMU map for DDR at run time
This patch fills the MMU map for DDR at run time based on information read
from Device Tree or automatically detected from static configuration.

The patch is needed because for systems which has for example 1GB of memory
but MMU map is 2GB there could be spurious accesses which was seen in past
when mapping is not fitting with actual memory installed.

Signed-off-by: Nitin Jain <nitin.jain@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Michal Simek
4490e013ee arm64: zynqmp: Wire watchdog internals
Enable watchdog in full U-Boot.

Similar changes were done by:
"arm: zynq: Wire watchdog internals"
(sha1: e6cc3b25d7)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Michal Simek
e00656b2a9 arm64: zynqmp: Reset FPD Watchdog on zcu100
Low level configuration didn't reset FPD Watchdog that's why accessing
it caused u-boot hang.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Siva Durga Prasad Paladugu
04ab29ab25 arm64: zynqmp: Add new defconfig for zc1275 revB
This patch enables support zc1275 revB board. It has
SD added compared to revA. The same configuration will
work for RevC boards aswell.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Michal Simek
61dc92a29d arm: zynq: Wire automatic ddr detection for Zynq and ZynqMP case
When static memory configuration is used U-Boot has capability to detect
memory size in setup range. Enable this feature for static
configuration.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23 13:15:32 +02:00
Michal Simek
cf0bcd7d02 arm64: zynqmp: Add support for Xilinx zcu106-revA
Xilinx zcu106 is a customer board. It is reusing some parts from zcu102.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
f7c8e491e9 arm64: zynqmp: Add support for zcu104 customer board
Xilinx zcu104 is another customer board. It is sort of zcu102 clone with
some differences.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
85231c087e arm64: zynqmp: Add support for zc12xx boards
Add support for zc12xx boards. All of them are internal boards for
silicon validation and share very similar base platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
10aaa3584b arm64: zynqmp: Add support for zc1751 dc3
zc1751 is based board with dc3 extenstion card which is used for silicon
validation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
6d0340931e arm64: zynqmp: Add support for zcu100 aka Ultra96 board
Add support for Xilinx zcu100.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
8314bfe5c7 arm64: zynqmp: Add low level initialization for zc1751
Add psu init for zc1751 dc cards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
979707baa9 arm64: zynqmp: Add low level initialization for zcu102-revA
Add psu init for zcu102-revA.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
8ae3d0b50c MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments
Fix my fragments to list all files in the repo.

Also fix path to for Xilinx Zynq SoC (mach-zynq)
It should be the part of
"ARM: zynq: move SoC sources to mach-zynq"
(sha1: 0107f24036)

And cover dts files in board MAINTAINERS files.

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:36:15 +01:00
Siva Durga Prasad Paladugu
c436bf92f6 arm64: zynqmp: Add support for verifying secure images
This patch adds new command "zynqmp" to handle zynqmp
specific commands like "zynqmp secure". This secure command is
used for verifying zynqmp specific secure images. The secure
image can either be authenticated or encrypted or both encrypted
and authenticated. The secure image is prepared using bootgen
and will be in xilinx specific BOOT.BIN format. The optional
key can be used for decryption of encrypted image if user
key was specified while creation BOOT.BIN.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:36:15 +01:00
Siva Durga Prasad Paladugu
83bf2ff03d arm64: zynqmp: Correct EG/EV part detection logic
The vcu disable bit in efuse ipdisable register is valid only
if PL powered up so, consider PL powerup status for determing
EG/EV part. If PL is not powered up, ignore EG/EV part of string.
The PL powerup status will be filled by pmufw based on PL PROGB
status in the 9th bit of version field.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:44 +01:00
Nitin Jain
51916864b3 arm64: zynqmp: Add support to load an app at EL1
This patch is adding support to switch to EL1 while loading an EL1
application with u-boot running at EL above EL1 in aarch64 mode.

Signed-off-by: Nitin Jain <nitinj@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:42 +01:00
Michal Simek
6c45abe709 arm64: zynqmp: Add psu_init for zcu102-rev1.0
Add low level initialization for zcu102-rev1.0.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30 14:29:24 +01:00