Commit graph

1474 commits

Author SHA1 Message Date
Faiz Abbas
b16c129c22 usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
board_usb_init()/_cleanup() should be in board files and don't have
a place in the xhci-omap driver. Weak versions for
board_usb_init()/_cleanup() already exist in common/usb.c
(for host mode) and drivers/usb/gadget/g_dnl.c (for gadget mode).

Therefore, remove init and cleanup functions from xhci-omap and
implement them in the board files.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-02-15 13:44:30 +01:00
Alexey Brodkin
163f8858ae usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH
For some reason from day one we used to have both CONFIG_DWC2_UTMI_WIDTH
mentioned in dwc2.h and in scripts/config_whitelist.txt but never really used
and CONFIG_DWC2_UTMI_PHY_WIDTH used in real code in dwc2.c (but never
defined).

Moreover even though CONFIG_DWC2_UTMI_WIDTH might be either 8 or 16
depending on hardware (and the same is said in a comment for it in
dwc2.h) but then 8 is hardcoded in the header leaving no ability to
override this value in board's configuration.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
2018-02-15 13:44:27 +01:00
Ulf Magnusson
a43aebee89 usb: ulpi: kconfig: Remove meaningless choice default
'default' on a choice refers to the symbol selected by default, not to
the choice mode, so 'default n' is meaningless.

No functional changes. Optional choices implicitly default to n mode
(and there is no way to make them default to another mode).

Discovered in Kconfiglib (https://github.com/ulfalizer/Kconfiglib),
which prints the following warning:

	warning: the default selection n (undefined) of <choice> (defined at drivers/usb/ulpi/Kconfig:3) is not contained in the choice

I've added a corresponding warning to the C tools too, which is
currently in linux-next: https://patchwork.kernel.org/patch/9983667/

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-05 20:58:12 -05:00
Tom Rini
a4d403290e usb: dwc2: make casts of ep->dma_buf consistent
In most places in the code we cast this to an unsigned long, but in one
place we cast to an unsigned int.  For consistency and to fix a warning
on 64bit targets, always cast this to unsigned long.  For the long term
we should however change the declaration of dma_buf.

Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-05 12:09:43 -05:00
Lukasz Majewski
4f60e5d3a8 Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
This commit moves USB_FUNCTION_MASS_STORAGE config to Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-02 07:13:48 -05:00
Lukasz Majewski
c6c1ca100f Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig
This commit moves USB_FUNCTION_THOR config to Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-02 07:13:48 -05:00
Lukasz Majewski
b76965958c Kconfig: usb: Sort USB_FUNCTION_* entries
Lets provide alphabetical order for USB_FUNCTION_* entries of
USB_GADGET_DOWNLOAD

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-02-02 07:13:48 -05:00
Tom Rini
40b61180c1 usb: host: Drop unused hcd_name from r8a66597-hcd.c
The variable hcd_name is unsued, drop.

Cc: Marek Vasut <marex@denx.de>
Cc: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-28 04:00:59 +01:00
Tom Rini
1c0ae0097b usb: Remove isp116x-hcd support
The isp116x-hcd driver is extremely long unused, so just remove it.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-28 04:00:59 +01:00
Tom Rini
f95a4b3a55 Merge git://git.denx.de/u-boot-usb 2018-01-27 14:48:52 -05:00
Tom Rini
1d12a7c8cd Merge git://git.denx.de/u-boot-spi 2018-01-26 07:46:34 -05:00
Daniel Schwierzeck
6f7c92db4c usb: ehci: mxs: fix swapped argument in ehci_writel()
ehci_writel() swaps the arguments for address and value. One call
in ehci-mxs ignores that.

This fixes the warning:

drivers/usb/host/ehci-mxs.c: In function ?ehci_hcd_stop?:
drivers/usb/host/ehci-mxs.c:159:19: error: initialization makes integer from pointer without a cast [-Werror=int-conversion]
  ehci_writel(tmp, &hcor->or_usbcmd);
                   ^
arch/arm/include/asm/io.h:117:34: note: in definition of macro ?writel?
 #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
                                  ^
drivers/usb/host/ehci-mxs.c:159:2: note: in expansion of macro ?ehci_writel?
  ^~~~~~~~~~~

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-25 20:59:20 +01:00
Gustavo A. R. Silva
eacccbda43 usb: xhci: Fix bool initialization in xhci_bulk_tx
Bool initializations should use true and false.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2018-01-25 20:59:16 +01:00
Álvaro Fernández Rojas
48263504c8 wait_bit: use wait_for_bit_le32 and remove wait_for_bit
wait_for_bit callers use the 32 bit LE version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24 12:03:43 +05:30
Adam Ford
6574864df8 Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_ROCKCHIP_USB2_PHY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
b9b500b0f9 Convert CONFIG_OMAP_USB_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_OMAP_USB_PHY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
3b9e2a2520 Convert CONFIG_TWL4030_USB to Kconfig
This converts the following to Kconfig:
   CONFIG_TWL4030_USB

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:30 -05:00
Adam Ford
e13a9dc370 Convert CONFIG_USB_MUSB_HCD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MUSB_HCD
   CONFIG_USB_MUSB_UDC
   CONFIG_USB_DAVINCI
   CONFIG_USB_OMAP3
   CONFIG_USB_DA8XX
   CONFIG_USB_AM35X

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:29 -05:00
Adam Ford
86362221fc Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MUSB_OMAP2PLUS
   CONFIG_USB_MUSB_AM35X
   CONFIG_USB_MUSB_DSPS
   CONFIG_USB_MUSB_PIO_ONLY

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22 16:43:29 -05:00
Eddie Cai
bf2b72bef1 usb: rockchip: add the rockusb gadget
this patch implement rockusb protocol on the device side. this is based on
USB download gadget infrastructure. the rockusb function implements the rd,
wl, rid commands. it can work with rkdeveloptool

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 11:11:05 +01:00
Chen-Yu Tsai
f4f9896ac3 musb: sunxi: Use base address from device tree
Now that the musb sunxi glue driver is completely device model / device
tree driven, we should use the base address from the device tree,
instead of hard-coding it in the source code.

Fixes: 3a61b080ac ("musb: sunxi: switch to the device model")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-01-10 11:11:05 +01:00
Ran Wang
91f4fb9b89 arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig
Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Ran Wang
be3872ea81 usb: ehci: fsl: Fix some compile warnings.
When enable CONFIG_HAS_FSL_DR_USB, we might encounter below compile
warning, apply this patch can fix it:

drivers/usb/host/ehci-fsl.c:109:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
   ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
    ^
drivers/usb/host/ehci-fsl.c:108:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  hcor = (struct ehci_hcor *)
         ^
drivers/usb/host/ehci-fsl.c:115:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
        (u32)hccr, (u32)hcor,
        ^
include/log.h:131:26: note: in definition of macro 'debug_cond'
    printf(pr_fmt(fmt), ##args); \
                          ^~~~
drivers/usb/host/ehci-fsl.c:114:2: note: in expansion of macro 'debug'
  debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n",
  ^~~~~
drivers/usb/host/ehci-fsl.c:115:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
        (u32)hccr, (u32)hcor,
                   ^
include/log.h:131:26: note: in definition of macro 'debug_cond'
    printf(pr_fmt(fmt), ##args); \
                          ^~~~
drivers/usb/host/ehci-fsl.c:114:2: note: in expansion of macro 'debug'
  debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n",
  ^~~~~

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Tom Rini
1a3fc354b5 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-12-18 18:39:00 -05:00
Wenbin song
a8f33034f2 armv8: ls1043a/ls2080a: check SoC by device ID
Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities of the same SoC family.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13 13:40:29 -08:00
Chris Brandt
243fd6420d usb: r8a66597: convert wait loop to readw_poll_timeout
It is better to use an existing wait loop implementation.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
2017-12-09 13:39:27 +01:00
Chris Brandt
11f4678962 usb: r8a66597: Add support for RZ/A series
While the USB HW in the RZ/A is basically the same, there are some
differences from the original versions that were in the SH SoCs.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
2017-11-28 04:06:40 +01:00
Vincent Prince
8171dac00d Trigger watchdog before calling usb_gadget_handle_interrupts
This prevents board resets when calling sdp command on boards which have a watchdog.

Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2017-11-26 02:22:36 +01:00
Marek Vasut
a8c402f45c usb: gadget: storage: Increase FSG_BUFLEN
Increase the buffer length to be just above maximum permissible value
of 128 kiB . This increases the performance of the UMS and alike by a
factor of 2 - 2.5 as the buffers are less fragmented.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lukasz Majewski <lukma@denx.de>
2017-11-26 02:22:36 +01:00
Dirk Behme
b3cbcd902d usb: ehci: do not invalidate a NULL buffer
Its a valid use case to call ehci_submit_async() with a NULL buffer
with length 0. E.g. from usb_set_configuration().

As invalidate_dcache_range() isn't able to judge if the address
NULL is valid or not (depending on the SoC hardware configuration it
might be valid) do the check in ehci_submit_async() as here we know
that we don't have to invalidate such a buffer.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
2017-11-26 02:22:36 +01:00
Heinrich Schuchardt
45157d2764 dm: usb: ehci: avoid possible NULL dereference
Currently we check in ehci_shutdown() if ctrl is NULL after
dereferencing it.

Before this we have already dereferenced ctrl, ctrl->hccr,
and ctrl->hcor in ehci_get_portsc_register(), ehci_submit_root(),
and hci_common_init().

A better approach is to already check ctrl, ctrl->hccr, and ctrl->hcor
during the initialization in ehci_register() and usb_lowlevel_init()
and signal an error here via the return code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-11-26 02:22:36 +01:00
Marek Vasut
e1cc60c0d6 usb: xhci: Add Renesas R-Car xHCI driver
Add firmware V3, firmware loader and XHCI glue for the Renesas R-Car
Gen3 SoCs XHCI controller. Thus far only the R-Car Gen3 R8A7795 ES2.0+
and R8A7796 are supported.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
2017-11-26 02:22:36 +01:00
Alexey Brodkin
9829ce2ff2 usb: ehci: Fix accessors for big-endian platforms and descriptors
Commit 9000eddbae ("drivers/usb/ehci: Use platform-specific accessors")
broke USB 2.0 on big-endian platforms because for them writel/readl()
does automatic conversion of BE data to LE.

Proper implementation requires to use "raw" variant of these accessors
which read/write data without messing with endianess.

While at it replace cpu_to_be32() to be32_to_cpu() in readl() to
keep sane semantics.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
Reported-by: Vladimir Boroda <boroda@yahoo.com>
2017-11-26 02:22:36 +01:00
Jon Nettleton
d3d036af8c mvebu: usb: xhci: a38x support
This makes the initial changes need to support the
a38x series of SOCs.  It adds the device-tree identifier
as well as changing the board_support function to take
the IO address designated by device-tree.

Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: use fdt_addr_t; update 37xx and 8K implementations]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-11-16 11:45:20 +01:00
Patrice Chotard
fb48bc448c sti: fix STMicroelectronics copyright
Uniformize all STMicroelectronics copyrights headers for STi
related code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06 09:51:01 -05:00
Ran Wang
420b0eba3c usb: host: Move CONFIG_XHCI_FSL to Kconfig
use Kconfig to select xhci accordingly.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:44:06 -07:00
Masahiro Yamada
4bb3dac772 usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h>
Including <common.h> pulls in a lot of bloat.  What this driver needs
is BIT(), so replace it with <linux/bitops.h>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>
2017-10-15 22:32:24 +09:00
Tom Rini
2ee87b0c1a Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2017-10-10 20:14:38 -04:00
Tom Rini
4f42a0d721 Merge git://git.denx.de/u-boot-sunxi 2017-10-05 08:26:36 -04:00
Masahiro Yamada
0a70fb4c1c bug.h: move runtime BUG/WARN macros into <linux/bug.h>
Collect runtime BUG/WARN into a self-contained header <linux/bug.h>
to make these macros easier to use.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-04 12:00:20 -04:00
Masahiro Yamada
9b643e312d treewide: replace with error() with pr_err()
U-Boot widely uses error() as a bit noisier variant of printf().

This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:

  # define __compiletime_error(message) __attribute__((error(message)))

This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux.  (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)

Let's convert error() into now treewide-available pr_err().

Done with the help of Coccinelle, excluing tools/ directory.

The semantic patch I used is as follows:

// <smpl>
@@@@
-error
+pr_err
 (...)
// </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04 11:59:44 -04:00
Masahiro Yamada
b44b30260f printk: collect printk stuff into <linux/printk.h> with loglevel support
When we import code from Linux, with regular re-sync planned, we want
to use printk() and pr_*().  U-Boot does not support them in a clean
way.  So, people end up with local macros, or compat headers here and
there, then we occasionally see build errors of definition conflicts.

We have include/linux/compat.h, but putting all sorts of unrelated
things into a single header is just a temporal workaround.  Hence this
patch, to find the best home for all printk variants.  If you want to
use printk() and friends, please include <linux/printk.h>.  This header
is self-contained, and pulls in only a few headers.

When I was testing this clean-up, I noticed the image size exceeded
its platform limit on some boards.  This is because all pr_*() that
were previously defined as no-op in include/linux/mtd/mtd.h (unless
CONFIG_MTD_DEBUG is set), are now enabled.

To make such boards happy, this commit also implements CONFIG_LOGLEVEL.
The concept is similar to the kernel parameter "loglevel".  (Actually,
the Kconfig help message was taken from kernel-paremeter.txt of Linux)
Messages with a loglevel smaller than console loglevel will be printed.

The difference is the loglevel is build-time determined.  To save the
image size, lower priority pr_*() are compiled out.  I set the default
of CONFIG_LOGLEVEL to 6, i.e. pr_notice and higher priority messages
are compiled in.

I adjusted CONFIG_LOGLEVEL to avoid build error for some boards.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Add in SPL_LOGLEVEL that is the same as LOGLEVEL]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04 10:31:17 -04:00
Marek Vasut
c322d4b72b usb: Drop the EHCI RCar Gen3
Since we use EHCI generic driver on RCar Gen3 , this driver is useless.
Remove it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-04 08:50:43 +09:00
Maxime Ripard
3c989f3a19 sunxi: Fix USB_GADGET implication
USB_GADGET will fail to compile if USB_MUSB_GADGET is not defined. Make
sure we have that condition right.

Fixes: e0ea88042d51 ("sunxi: Imply USB_ETHER")
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:06 +02:00
Maxime Ripard
3a61b080ac musb: sunxi: switch to the device model
The device model was implemented so far using a hook that needed to be
called from the board support, without DT support and only for the host.

Switch to probing both in peripheral and host mode through the DT.

Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
e02687bda9 sunxi: provide default USB gadget setup
All the Allwinner boards use the same manufacturer, VID and PID for the
gadgets. Make them the defaults to remove some boilerplate from our
defconfigs.

Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
10ac57fda3 usb: gadget: usb_ether: Move settings to common
The usb_ether gadget duplicates the USB settings for the manufacturer,
product ID and vendor ID.

Make sure we use the common option so that we can expect a single VID/PID
couple for a single device.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
a95aee6af7 usb: gadget: Make g_dnl USB settings common
The g_dnl USB settings for the vendor ID, product ID and manufacturer are
actually common settings that can and should be shared by all the gadgets.

Make them common by renaming them, and convert all the users.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
d2f0f4af4b usb: gadget: usb_ether: Move the interfaces to Kconfig
We need to select an interface for the usb_ether gadget, and they haven't
been converted to Kconfig yet. Add a choice to make sure we have an option
selected, and convert all the users.

Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
3f33d3c8f4 usb: gadget: Convert USB_ETHER to Kconfig
The USB Ethernet gadget option has not yet been moved to Kconfig, let's
deal with that.

Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00