Commit graph

9 commits

Author SHA1 Message Date
Simon Glass
a5dec5a5c4 x86: cros_ec: Drop unnecessary init
Since driver model will probe the EC when it is first used, we do not
need to init it explicitly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:15 -06:00
Bin Meng
48a223e4ba x86: coreboot: Wrap cros_ec initialization
cros_ec_board_init() should be called only when CONFIG_CROS_EC is
enabled.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:25:04 -08:00
Bin Meng
ade8127a79 x86: Make chromebook_link the default board for coreboot
Change SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE to chromebook_link
which is currently the only real board officially supported to run
U-Boot loaded by coreboot.

Note the symbolic link file chromebook_link.dts is deleted and
link.dts is renamed to chromebook_link.dts.

To avoid multiple definition of video_hw_init, the CONFIG_VIDEO_X86
define needs to be moved to arch/x86/cpu/ivybridge/Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:25:04 -08:00
Bin Meng
fa48e51013 x86: Remove include/configs/coreboot.h
Since we already swtiched to use the new mechanism for building
U-Boot for coreboot, coreboot.h is no longer needed so remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:25:04 -08:00
Bin Meng
24ef04280c x86: Move CONFIG_SYS_CAR_xxx to Kconfig
Move CONFIG_SYS_CAR_ADDR and CONFIG_SYS_CAR_SIZE to Kconfig so that
we don't need them in the board configuration file thus the same
board configuratoin file can be used to build both coreboot version
and bare version.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:25:04 -08:00
Bin Meng
c57522f656 x86: coreboot: Make SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE configurable
In theory U-Boot built for coreboot is supposed to run as a payload
to be loaded by coreboot on every board that coreboot supports.
The U-Boot build process uses SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE
which are hardcoded in board defconfig and Kconfig files. For better
support of coreboot, we want to make these two options configurable
so that we can easily change them during 'make menuconfig' so that
the generated U-Boot image for coreboot is board configuration aware.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:25:03 -08:00
Bin Meng
b71eec3129 x86: ich6-gpio: Add Intel Tunnel Creek GPIO support
Intel Tunnel Creek GPIO register block is compatible with current
ich6-gpio driver, except the offset and content of GPIO block base
address register in the LPC PCI configuration space are different.

Use u16 instead of u32 to store the 16-bit I/O address of the GPIO
registers so that it could support both Ivybridge and Tunnel Creek.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-18 17:26:06 -07:00
Bin Meng
2795573a8c x86: ich6-gpio: Move setup_pch_gpios() to board support codes
Movie setup_pch_gpios() in the ich6-gpio driver to the board support
codes, so that the driver does not need to know any platform specific
stuff (ie: include the platform specifc chipset header file).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-13 22:32:04 -07:00
Simon Glass
fe5b9b447c x86: Rename chromebook-x86 to coreboot
Rename this vendor since it is intended to be used on any platform where
coreboot runs at reset and then loads U-Boot.

So far it is only tested on link. When other boards are supported it is
likely that we will need to move to multiple board names, all under the
'coreboot' vendor. So while it would be possible to remove the vendor for
now, that would be short-sighted.

Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:16 +01:00