Commit graph

43 commits

Author SHA1 Message Date
Marek Vasut
a4223b746d env: Implement support for encrypting environment
Add function which allows encrypting the whole environment block with
AES-128-CBC. The key for the environment is retrieved by
env_aes_cbc_get_key() function, which must be implemented on a per-board
basis.

Signed-off-by: Marek Vasut <marex@denx.de>
2014-03-21 16:44:02 -04:00
Marek Vasut
7ce1526ed2 env: Add env_export() wrapper
Implement env_export() wrapper, so that all implementers of saveenv() don't
have to call hexport_r(), crc32() etc. sequence . This trims down a bit of
code duplication.

Signed-off-by: Marek Vasut <marex@denx.de>
2014-03-21 16:43:59 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Bo Shen
5707df7796 mmc: fix env in mmc with redundant compile error
The commit d196bd8 (env_mmc: add support for redundant environment)
introduce the following compile error when enable redundant
environment support with MMC
---8<---
env_mmc.c:149: error: 'env_t' has no member named 'flags'
env_mmc.c:248: error: 'env_t' has no member named 'flags'
env_mmc.c:248: error: 'env_t' has no member named 'flags'
env_mmc.c:250: error: 'env_t' has no member named 'flags'
env_mmc.c:250: error: 'env_t' has no member named 'flags'
env_mmc.c:252: error: 'env_t' has no member named 'flags'
env_mmc.c:252: error: 'env_t' has no member named 'flags'
env_mmc.c:254: error: 'env_t' has no member named 'flags'
env_mmc.c:254: error: 'env_t' has no member named 'flags'
env_mmc.c:267: error: 'env_t' has no member named 'flags'
make[1]: *** [env_mmc.o] Error 1
--->8---

Add this patch to fix it

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Reviewed-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-13 16:44:49 -05:00
Joe Hershberger
785881f775 env: Add redundant env support to UBI env
Allow the user to specify two UBI volumes to use for the environment

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-04-11 15:52:55 -04:00
Joe Hershberger
2b74433f36 env: Add support for UBI environment
UBI is a better place for the environment on NAND devices because it
handles wear-leveling and bad blocks.

Gluebi is needed in Linux to access the env as an MTD partition.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-04-11 15:52:55 -04:00
Joe Hershberger
267541f776 env: Add support for access control to .flags
Add support for read-only, write-once, and change-default.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
2598090b7e env: Add environment variable flags
Currently just validates variable types as decimal, hexidecimal,
boolean, ip address, and mac address.

If the entry is not found in the env ".flags", then look in the static
one. This allows the env to override the static definitions, but prevents
the need to have every definition in the environment distracting you.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
170ab11075 env: Add support for callbacks to environment vars
Add support for per-variable callbacks to the "hashtable" functions.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

!!!fix comment in callback
2012-12-13 11:46:55 -07:00
Joe Hershberger
7afcf3a55b env: Refactor apply into change_ok
Move the read of the old value to inside the check function.  In some
cases it can be avoided all together and at the least the code is only
called from one place.

Also name the function and the callback to more clearly describe what
it does.

Pass the ENTRY instead of just the name for direct access to the whole
data structure.

Pass an enum to the callback that specifies the operation being approved.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Gerlando Falauto
b64b7c3df7 env: make "env default" selective, check and apply
Change the syntax (user API) for "env default":
  -f: override write-once variables
  var... : accept individual variable(s)
  -a: all (resetting the whole env is NOT the default behavior)

Enable variable checking and make changes effective by
enabling do_apply argument to himport_r().

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
2012-09-18 12:01:52 -07:00
Gerlando Falauto
c5983592e9 env: add check/apply logic to himport_r()
Change hashtable so that a callback function will decide whether a
variable can be overwritten, and possibly apply the changes.

So add a new field to struct hsearch_data:

 o "apply" callback function to check whether a variable can be
    overwritten, and possibly immediately apply the changes;
    when NULL, no check is performed.

And a new argument to himport_r():
 o "do_apply": whether to call the apply callback function

NOTE: This patch does not change the current behavior.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-09-18 12:01:52 -07:00
Marek Vasut
b37d41aa24 Block: Remove MG DISK support
This driver is unused and obsolete.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: unsik Kim <donari75@gmail.com>
2012-06-21 20:53:09 +02:00
Igor Grinberg
6f403bad80 env: remove value from boolean defines
Several boolean defines have a value assigned.
Remove the value as defining the symbol is enough.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-01-05 16:35:54 +01:00
Igor Grinberg
27aafe988e env: clean env_common.c checkpatch and code style
Cleanup the env_common.c checkpatch warnings, errors and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:27 +01:00
Igor Grinberg
d09b1787a4 env: clean cmd_nvedit.c checkpatch and code style
Cleanup the cmd_nvedit.c checkpatch warnings, errors and coding style.
There are 10 wanrings left about the simple_strtoul() function:
 WARNING: simple_strtoul is obsolete, use kstrtoul instead
 #359: FILE: cmd_nvedit.c:359:
 +		load_addr = simple_strtoul(argv[2], NULL, 16);

 ...

 total: 0 errors, 10 warnings, 1043 lines checked

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:25 +01:00
Igor Grinberg
994bc671cf env: move extern environment[] to environment.h
Extract all extern declarations for environment out of c files
into the environment.h header.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:25 +01:00
Igor Grinberg
d1459f0fab env: move extern default_environment[] to environment.h
Extract all extern declarations for default_environment[] out of c files
into the environment.h header.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2011-11-22 08:39:25 +01:00
Igor Grinberg
507651d611 env: clean environment.h checkpatch and code style
Though one warning left:
 WARNING: do not add new typedefs
 #149: FILE: u-boot/include/environment.h:149:
 +typedef struct environment_s {

 total: 0 errors, 1 warnings, 181 lines checked

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:25 +01:00
Wolfgang Denk
33a6b9e90b environment.h: fix warning: "CONFIG_ENV_IS_EMBEDDED" redefined
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
2011-08-01 15:20:16 +02:00
Mike Frysinger
147c7169e8 constify default env
I can't see any obvious needs for the default environment to be writable,
so make it const.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:34:22 +02:00
Yoshihiro Shimoda
efb063390d add checking the CONFIG_ENV_IS_IN_SPI_FLASH in Enbedded env
Fix the problem which cannot build the U-boot, if we only set
the CONFIG_ENV_IS_IN_SPI_FLASH.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-15 22:09:50 +01:00
Mike Frysinger
2eb1573f01 hashtable: drop all non-reentrant versions
The non-reentrant versions of the hashtable functions operate on a single
shared hashtable.  So if two different people try using these funcs for
two different purposes, they'll cause problems for the other.

Avoid this by converting all existing hashtable consumers over to the
reentrant versions and then punting the non-reentrant ones.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-17 21:07:14 +01:00
Wolfgang Denk
ea882baf9c New implementation for internal handling of environment variables.
Motivation:

* Old environment code used a pessimizing implementation:
  - variable lookup used linear search => slow
  - changed/added variables were added at the end, i. e. most
    frequently used variables had the slowest access times => slow
  - each setenv() would calculate the CRC32 checksum over the whole
    environment block => slow
* "redundant" envrionment was locked down to two copies
* No easy way to implement features like "reset to factory defaults",
  or to select one out of several pre-defined (previously saved) sets
  of environment settings ("profiles")
* No easy way to import or export environment settings

======================================================================

API Changes:

- Variable names starting with '#' are no longer allowed

  I didn't find any such variable names being used; it is highly
  recommended to follow standard conventions and start variable names
  with an alphanumeric character

- "printenv" will now print a backslash at the end of all but the last
  lines of a multi-line variable value.

  Multi-line variables have never been formally defined, allthough
  there is no reason not to use them. Now we define rules how to deal
  with them, allowing for import and export.

- Function forceenv() and the related code in saveenv() was removed.
  At the moment this is causing build problems for the only user of
  this code (schmoogie - which has no entry in MAINTAINERS); may be
  fixed later by implementing the "env set -f" feature.

Inconsistencies:

- "printenv" will '\\'-escape the '\n' in multi-line variables, while
  "printenv var" will not do that.

======================================================================

Advantages:

- "printenv" output much better readable (sorted)
- faster!
- extendable (additional variable properties can be added)
- new, powerful features like "factory reset" or easy switching
  between several different environment settings ("profiles")

Disadvantages:

- Image size grows by typically 5...7 KiB (might shrink a bit again on
  systems with redundant environment with a following patch series)

======================================================================

Implemented:

- env command with subcommands:

  - env print [arg ...]

    same as "printenv": print environment

  - env set [-f] name [arg ...]

    same as "setenv": set (and delete) environment variables

    ["-f" - force setting even for read-only variables - not
    implemented yet.]

  - end delete [-f] name

    not implemented yet

    ["-f" - force delete even for read-only variables]

  - env save

    same as "saveenv": save environment

  - env export [-t | -b | -c] addr [size]

    export internal representation (hash table) in formats usable for
    persistent storage or processing:

	-t:	export as text format; if size is given, data will be
		padded with '\0' bytes; if not, one terminating '\0'
		will be added (which is included in the "filesize"
		setting so you can for exmple copy this to flash and
		keep the termination).
	-b:	export as binary format (name=value pairs separated by
		'\0', list end marked by double "\0\0")
	-c:	export as checksum protected environment format as
		used for example by "saveenv" command
	addr:	memory address where environment gets stored
	size:	size of output buffer

	With "-c" and size is NOT given, then the export command will
	format the data as currently used for the persistent storage,
	i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and
	prepend a valid CRC32 checksum and, in case of resundant
	environment, a "current" redundancy flag. If size is given, this
	value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32
	checksum and redundancy flag will be inserted.

	With "-b" and "-t", always only the real data (including a
	terminating '\0' byte) will be written; here the optional size
	argument will be used to make sure not to overflow the user
	provided buffer; the command will abort if the size is not
	sufficient. Any remainign space will be '\0' padded.

        On successful return, the variable "filesize" will be set.
        Note that filesize includes the trailing/terminating '\0'
        byte(s).

        Usage szenario: create a text snapshot/backup of the current
	settings:

		=> env export -t 100000
		=> era ${backup_addr} +${filesize}
		=> cp.b 100000 ${backup_addr} ${filesize}

	Re-import this snapshot, deleting all other settings:

		=> env import -d -t ${backup_addr}

  - env import [-d] [-t | -b | -c] addr [size]

    import external format (text or binary) into hash table,
    optionally deleting existing values:

	-d:	delete existing environment before importing;
		otherwise overwrite / append to existion definitions
	-t:	assume text format; either "size" must be given or the
		text data must be '\0' terminated
	-b:	assume binary format ('\0' separated, "\0\0" terminated)
	-c:	assume checksum protected environment format
	addr:	memory address to read from
	size:	length of input data; if missing, proper '\0'
		termination is mandatory

  - env default -f

    reset default environment: drop all environment settings and load
    default environment

  - env ask name [message] [size]

    same as "askenv": ask for environment variable

  - env edit name

    same as "editenv": edit environment variable

  - env run

    same as "run": run commands in an environment variable

======================================================================

TODO:

- drop default env as implemented now; provide a text file based
  initialization instead (eventually using several text files to
  incrementally build it from common blocks) and a tool to convert it
  into a binary blob / object file.

- It would be nice if we could add wildcard support for environment
  variables; this is needed for variable name auto-completion,
  but it would also be nice to be able to say "printenv ip*" or
  "printenv *addr*"

- Some boards don't link any more due to the grown code size:
  DU405, canyonlands, sequoia, socrates.

	=> cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>,
	       Stefan Roese <sr@denx.de>,
	       Heiko Schocher <hs@denx.de>

- Dropping forceenv() causes build problems on schmoogie

	=> cc: Sergey Kubushyn <ksi@koi8.net>

- Build tested on PPC and ARM only; runtime tested with NOR and NAND
  flash only => needs testing!!

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>,
Cc: Stefan Roese <sr@denx.de>,
Cc: Heiko Schocher <hs@denx.de>
Cc: Sergey Kubushyn <ksi@koi8.net>
2010-09-19 19:29:48 +02:00
Ben Gardiner
c9f7351b5b NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)
This is a re-submission of the patch by Harald Welte
<laforge@openmoko.org> with minor modifications for rebase and changes
as suggested by Scott Wood <scottwood@freescale.com> [1] [2].

This patch enables the environment partition to have a run-time dynamic
location (offset) in the NAND flash.  The reason for this is simply that
all NAND flashes have factory-default bad blocks, and a fixed compile
time offset would mean that sometimes the environment partition would
live inside factory bad blocks. Since the number of factory default
blocks can be quite high (easily 1.3MBytes in current standard
components), it is not economic to keep that many spare blocks inside
the environment partition.

With this patch and CONFIG_ENV_OFFSET_OOB enabled, the location of the
environment partition is stored in the out-of-band (OOB) data of the
first block in flash. Since the first block is where most systems boot
from, the vendors guarantee that the first block is not a factory
default block.

This patch introduces the 'nand env.oob' command, which can be called
from the u-boot command line. 'nand env.oob get' reads the address of
the environment partition from the OOB data, 'nand env.oob set
{offset,partition-name}' allows the setting of the marker by specifying
a numeric offset or a partition name.

[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/43916
[2] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/79195

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Harald Welte <laforge@gnumonks.org>
2010-07-12 13:56:46 -05:00
Wolfgang Denk
b218ccb543 Redundant environment: move flag definitions to header file
Instead of defining the flags sevaral times in different source files
(which is error prone), move them to a central place in a header file.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-04 23:52:42 +02:00
Mike Frysinger
0a9e4e7721 unify {CONFIG_,}ENV_IS_EMBEDDED
Some boards have fallen out of sync by defining CONFIG_ENV_IS_EMBEDDED
manually.  While it is useful to have this available to the build system,
let's do it automatically rather than forcing people to opt into it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-08-25 12:57:54 +02:00
Mike Frysinger
3756609076 compiler.h: unify system ifdef cruft here
Shove a lot of the HOSTCC and related #ifdef checking crap into the new
compiler.h header so that we can keep all other headers nice and clean.

Also introduce custom uswap functions so we don't have to rely on the non
standard implementations that a host may (or may not in the case of OS X)
provide.  This allows mkimage to finally build cleanly on an OS X system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-19 21:41:46 +02:00
unsik Kim
75eb82ec7c mflash: Initial mflash support
Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.

IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)

This driver support mflash IO mode.

Followings are brief descriptions about IO mode.

1. IO mode based on ATA protocol and uses some custom command. (read
   confirm, write confirm)
2. IO mode uses SRAM bus interface.

Signed-off-by: unsik Kim <donari75@gmail.com>
2009-04-03 23:47:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0e8d158664 rename CFG_ENV macros to CONFIG_ENV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5a1aceb068 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
51bfee1920 rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:47:58 +02:00
Harald Welte
5bb12dbd7a Remove code duplication for setting the default environment
common/env_common.c (default_env): new function that resets the environment to
		    the default value
common/env_common.c (env_relocate): use default_env instead of own copy
common/env_nand.c (env_relocate_spec): use default_env instead of own copy
include/environment.h: added default_env prototype

Signed-off-by: Werner Almesberger <werner@openmoko.org>
Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-07-10 00:28:20 +02:00
Joakim Tjernlund
b502611b51 Change env_get_char from a global function ptr to a function
This avoids an early global data reference.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2008-07-09 23:59:30 +02:00
Wolfgang Denk
4f805c1e3a environment: fix bug introduced by commit a8409f4f1a
env_get_char is not a function, but a pointer to one.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-14 23:36:10 +02:00
Wolfgang Denk
a8409f4f1a environment: cleanup prototype declarations of env functions.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-14 12:22:49 +02:00
Mike Frysinger
89cdab788f crc32: use uint32_t rather than unsigned long
The envcrc.c does sizeof(unsigned long) when calculating the crc, but
this is done with the build toolchain instead of the target tool
chain, so if the build is a 64bit system but the target is 32bits,
the size will obviously be wrong. This converts all unsigned long
stuff related to crc32 to uint32_t types. Compile tested only: output
of ./tools/envcrc when run on a 32bit build system matches that of a
64bit build system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-04-24 13:18:17 +02:00
Stefan Roese
d1a7254529 [PATCH] Select NAND embedded environment from board configuration
The current NAND Bootloader setup forces the environment
variables to be in line with the bootloader. This change
enables the configuration to be made in the board include
file instead so that it can be individually enabled.

Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 17:34:10 +01:00
Stefan Roese
d12ae80889 Add NAND environment support for PPC440EPx Sequoia NAND boot config
Patch by Stefan Roese, 12 Sep 2006
2006-09-12 20:19:10 +02:00
Markus Klotzbuecher
e443c944cf Support for redundant environment in NAND Flash. 2006-03-20 18:02:44 +01:00
wdenk
500545cc6b Fix problem with default #defines
Cleanup compiler warning
2003-03-06 14:23:06 +00:00
wdenk
c609719b8d Initial revision 2002-11-03 00:24:07 +00:00